Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG FSX51407Z
Summary of Contents for AEG FSX51407Z
- Page 1 EN User Manual | Dishwasher FSX51407Z aeg.com\register...
-
Page 2: Table Of Contents
Welcome to AEG! Thank you for choosing our appliance. Get usage advice, brochures, trouble shooter, service and repair information: www.aeg.com/support Subject to change without notice. CONTENTS 1. SAFETY INFORMATION................2 2. SAFETY INSTRUCTIONS................4 3. INSTALLATION....................6 4. PRODUCT DESCRIPTION................7 5. - Page 3 • Children of less than 3 years of age should be kept away from the appliance unless continuously supervised. • Children should be supervised to ensure that they do not play with the appliance. • Keep detergents away from children. •...
-
Page 4: Safety Instructions
• If the appliance has ventilation openings in the base, they must not be covered e.g. by a carpet. • The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be reused. - Page 5 discontinued: motor, circulation and drain pump, heaters and heating elements, including heat pumps, piping and related equipment including hoses, valves, filters and aquastops, structural and interior parts related to door assemblies, printed circuit boards, electronic displays, pressure switches, thermostats and sensors, software and firmware including reset software.
-
Page 6: Installation
3.1 Building in www.youtube.com/electrolux www.youtube.com/aeg How to install your AEG/Electrolux 45 cm dishwasher 820-900 818-898 3.2 Safety caps If the furniture panel is not installed, open the appliance door carefully to avoid the risk of injury. -
Page 7: Product Description
4. PRODUCT DESCRIPTION Upper spray arms Cutlery basket Lower spray arm Lower basket Filters Upper basket Rating plate Salt container The graphic is a general overview. For Air vent more details, refer to other chapters or documents provided with the appliance. Rinse aid dispenser Detergent dispenser 5. -
Page 8: Programmes
Delay button 5.1 Indicators Indicator Description Drying phase indicator. It is on when you select a programme with the drying phase. It flash‐ es when the drying phase operates. Salt indicator. It is on when the salt container needs refilling. It is always off while the pro‐ gramme operates. -
Page 9: Settings
Programme Dishwasher load Degree of soil Programme phases • Prewash This programme offers the most efficient use of water and energy consumption for crockery and cutlery with normal soil. This is the standard programme for test institutes. This programme is used to assess compliance with the Ecodesign Comission Regulation (EU) 2019/2022. - Page 10 • Activation or deactivation of the AirDry. To enter the user mode, press and hold the programme button until the indicator The saved settings remain valid until you change them again. flashes and the indicators are on. How to set the programme selection 7.2 The water softener mode The water softener removes minerals from...
- Page 11 Regeneration process when it occurs at any point at the beginning For the correct water softener operation, the or in the middle of a programme. resin of the softener device needs to be regenerated regularly. This process is automatic and is the part of the normal All the consumption values mentioned in dishwasher operation.
- Page 12 7.5 Acoustic signals How to deactivate the rinse aid empty notification Acoustic signals sound when a malfunction of the appliance occurs. It is not possible to Make sure the appliance is in user mode. deactivate these acoustic signals. 1. Press the programme button immediately. There is also an acoustic signal that sounds The indicator starts to flash.
-
Page 13: Before First Use
How to deactivate the AirDry CAUTION! Make sure the appliance is in user mode. Do not try to close the appliance door within 2 minutes after automatic opening. 1. Press the programme button four times. This can cause damage to the appliance. The indicator starts to flash. -
Page 14: Daily Use
CAUTION! CAUTION! Water and salt can come out of the salt The compartment (C) is for rinse aid only. container when you fill it. To prevent Do not fill it with detergent. corrosion, fill the salt container and then immediately start a complete CAUTION! dishwashing cycle with detergent. - Page 15 3. If the programme has a prewash phase, Opening the door while the appliance put a small quantity of detergent on the operates inner part of the appliance door. 4. Close the lid. Make sure that the lid locks Opening the door while a programme is into position.
-
Page 16: Hints And Tips
Close the water tap. End of the programme When the programme is complete, the Auto Off function switches the appliance off. 10. HINTS AND TIPS 10.1 General – Follow the instructions in the chapter "Care and cleaning". Follow the hints below to ensure optimal cleaning and drying results in daily use and to 10.2 Using salt, rinse aid and protect the environment. -
Page 17: Care And Cleaning
1. Set the highest level of the water • Put cutlery and small items in the cutlery softener. basket. 2. Make sure that the salt and rinse aid • Make sure that the spray arms can move containers are full. freely before you start a programme. - Page 18 • Using short-duration programmes regularly can cause grease and limescale buildup inside the appliance. Run long- duration programmes at least twice a month to prevent the buildup. 11.2 Removal of foreign objects Check the filters and the sump after each use of the dishwasher.
- Page 19 2. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes. 3. To install the spray arm back, press it 7. Reassemble the filters (B) and (C). downwards.
-
Page 20: Troubleshooting
4. To install the spray arm back, insert the mounting element in the spray arm and fix it in the duct by turning it counterclockwise. Make sure that the mounting element locks into place. 3. Wash the spray arm under running water. Use a thin pointed tool, e.g. - Page 21 Problem and alarm code Possible cause and solution The programme does not start. • Make sure that the appliance door is closed. • If the delay start is set, cancel the setting or wait for the end of the countdown. •...
- Page 22 Problem and alarm code Possible cause and solution Technical malfunction of the appliance. • Switch the appliance off and on. • The indicator flashes 12 times intermit‐ tently. • Acoustic signal sounds 12 times intermittent‐ The level of water inside the appliance is too •...
- Page 23 WARNING! We do not recommend using the appliance until the problem has been completely fixed. Unplug the appliance and do not plug it in again until you are certain that it operates correctly. 12.1 The dishwashing and drying results are not satisfactory Problem Possible cause and solution Poor washing results.
-
Page 24: Technical Information
Problem Possible cause and solution There are residues of detergent in the • The detergent tablet got stuck in the dispenser and was not washed dispenser at the end of the pro‐ away by water. gramme. • Water cannot wash away the detergent from the dispenser. Make sure that the spray arm is not blocked or clogged. -
Page 25: Environmental Concerns
It is possible to find information related to the product information sheet. Keep the energy performance of the product in the EU EPREL label for reference together with the user database using the link https:// manual and all other documents provided eprel.ec.europa.eu and the model name and with this appliance. - Page 28 156825640-A-442023...
Need help?
Do you have a question about the FSX51407Z and is the answer not in the manual?
Questions and answers