hit counter script
Pioneer DJM-900NXS2 Service Manual
  1. Manuals
  2. Brands
  3. Pioneer Manuals
  4. DJ Equipment
  5. DJM-900NXS2
  6. Service manual

Pioneer DJM-900NXS2 Service Manual

Hide thumbs Also See for DJM-900NXS2:
Table of Contents

Advertisement

Quick Links

Download this manual
DJ MIXER
DJM-900NXS2
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Model
Type
DJM-900NXS2
LSYXJ
DJM-900NXS2
UXJCB
DJM-900NXS2
XJCN
THIS SERVICE MANUAL SHOULD BE USED TOGETHER WITH THE FOLLOWING MANUAL(S).
Model
DJM-900NXS2
PIONEER CORPORATION
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 2 Jalan Kilang Barat, #07-01, Singapore 159346
Pioneer DJ Corporation 2016
Power Requirement
AC 110 V to 240 V
AC 110 V to 240 V
AC 220 V
Order No.
RRV4644
SCHEMATIC DIAGRAM, PCB CONNECTION DIAGRAM, PCB PARTS LIST
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan
DJM-900NXS2
Remarks
K-MZV FEB.
ORDER NO.
RRV4643
Remarks
2016 Printed in Japan

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DJM-900NXS2 and is the answer not in the manual?

Questions and answers

Related Manuals for Pioneer DJM-900NXS2

Summary of Contents for Pioneer DJM-900NXS2

  • Page 1 PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 2 Jalan Kilang Barat, #07-01, Singapore 159346 Pioneer DJ Corporation 2016 K-MZV FEB.

  • Page 2: Safety Information

    WARNING This product may contain a chemical known to the State of California to cause cancer, or birth defects or other reproductive harm. Health & Safety Code Section 25249.6 - Proposition 65 DJM-900NXS2...

  • Page 3: Table Of Contents

    8.3 USER SETABLE ITEMS ............................... 60 9. EXPLODED VIEWS AND PARTS LIST..........................62 9.1 PACKING SECTION ..............................62 9.2 EXTERIOR SECION..............................64 9.3 BOTTOM SECION ................................ 66 9.4 CONTROL PANEL SECTION (1/2)..........................68 9.5 CONTROL PANEL SECTION (2/2)..........................70 DJM-900NXS2...

  • Page 4: Service Precautions

    Never replace the X-PAD TOUCH CONTROLLER (IC4902) on the CDCBN Assy during servicing. If the IC4902 is assumed to be defective, replace the whole CDCB Assy. This X-PAD TOUCH CONTROLLER contains data that can only be written in at the factory. DJM-900NXS2...

  • Page 5: Specifications

    Microphone equalizer characteristic (XJCN: DDG1114) HI ............–12 dB to +12 dB (10 kHz) LOW ........... –12 dB to +12 dB (100 Hz) • USB cable (DDE1128) • Operating Instructions (Quick Start Guide) (LSYXJ: DRH1331, DRH1332) (UXJCB: DRH1330) (XJCN: DRH1333) DJM-900NXS2...

  • Page 6: Basic Items For Service

    3.2 JIGS LIST Jigs List Jig Name Part No. Purpose of use / Remarks USB cable GGP1193 for PC connection, accessory Lubricants and Glues List Name Part No. Remarks Lubricating oil GYA1001 Refer to "9.5 CONTROL PANEL SECTION (2/2)". DJM-900NXS2...

  • Page 7: Pcb Locations

    ASSY MAIN ASSY HPJM ASSY SW POWER FAD4 ASSY FAD1 ASSY HPJK ASSY SUPPLY FAD3 ASSY FAD2 ASSY HPPW ASSY REGB ASSY PNLB ASSY CRFD ASSY Mark No. Description Part No. Mark No. Description Part No. LIST OF ASSEMBLIES DJM-900NXS2...

  • Page 8: Block Diagram

    4. BLOCK DIAGRAM MIC1 MIC2 RETURN (TS) (XLR/TRS) (XLR/TRS) JA5201 JA5401 JA5601 JA5801 SEND (TS) JA3201 DKB1112- DKB1112- DKB1112- DKB1112- JA5103 JA5104 JA6001 JA6002 JA5101 JA5102 DKB1093- DKB1124- DKN1653- DKN1654- DKN1652- DKN1652- DKN1652- L/MONO L/MONO CDCB ASSY MASTER1 CD/LINE PHONO CD/LINE PHONO CD/LINE...

  • Page 9: Audio System Block Diagram

    CN7001 CN4506 MAIN ASSY DDR3 SDRAM (1Gb) MAIN UCOM USBB ASSY CN4509 CN4851 USBP ASSY USBC ASSY MAIN ASSY MAIN ASSY MAIN ASSY MAIN ASSY SEND ASSY HPJK ASSY DSP_SDRAM1 (256Mb) DSP_SDRAM2 (256Mb) HPPW ASSY HPJM ASSY AINB ASSY DJM-900NXS2...

  • Page 10: Dsp Block Diagram

    USB A OUT Return LEVEL CHx Control Tone USB B OUT Post CHx Fader REUTRN REUTRN INSERT Cross Fader A Output Cross Fader B Select MIX(REC OUT) Select in FX SEND CHx USB A OUT USB B OUT FX SEND Master DJM-900NXS2...

  • Page 11: Power Supply Block Diagram

    OLED OLED OLED OLED CN4906 V+3R3 V+3R3OLED OLED TRIM1 ASSY TRIM2 ASSY TRIM3 ASSY TRIM4 ASSY V+15OLED 15OLED CN7004 CN6101 CN6201 CN6301 CN6401 CDCB ASSY V+3R3REF 3R3REF PNLA ASSY CN7811 CN7006 V+3R3REF V+3R3REF FAD1 ASSY CN5201 CN5401 CN5601 CN5801 V+3R3REF 3R3REF IC7001 IC7001...

  • Page 12: Diagnosis

    Notice of version UART communication acknowledgement Normal mode operation start Normal mode initialization [V5D_25D_CONT] ON [HIGH] [V5D_25D_CONT] ON [V+5D] ON [V+2R5D] ON Canceling reset [HIGH] [PHY] RESET Canceling reset [HIGH] AM_SH_RDY setting [LOW] Handshake prohibition 1st BOOT 2nd BOOT start DJM-900NXS2...
  • Page 13 [DIR] RESET Setting [DIR], [DIT] Notice of all device Notice of start completion start completion (Notice of error) (Notice of error) [CPU_MUTE] OFF [LOW] [CPU_MUTE] OFF Notice of MUTE cancellation completion Notice of MUTE cancellation completion Canceling software MUTE DJM-900NXS2...

  • Page 14: Troubleshooting

    : CENTER HP MIXING : CENTER SEND/RETURN : 1/4" JACK MIC SW : OFF RETURN TYPE : INSERT EQ CURVE : EQ CH CUE : OFF CH FADER CURVE : CENTER MASTER CUE : ON CROSS FADER CURVE : CENTER DJM-900NXS2...
  • Page 15 The USBC UCOM (IC2004) may be defective. ————— • USB HOST startup error (IC2004) and its Replace the MAIN Assy. peripheral circuit • I2C error • USB communication error • Communication error between the MAIN UCOM and USBC UCOM DJM-900NXS2...
  • Page 16 Check the audio signal (sine wave) in the previous stage must be improperly soldered or defective. Check for the soldering status of part, Representative CH1 above-mentioned signal path. or replace it. • If an audio signal is input, go to [3]. DJM-900NXS2...
  • Page 17 • If it is Low, a SEL_CH*_A/D signal route or the IC1005 (CH2) - pin 6 MAIN Assy must be improperly soldered or 3-7-2 defective. Check for the soldering status of part, IC1006 (CH3) - pin 6 or replace the MAIN Assy. 3-7-3 IC1007 (CH4) - pin 6 3-7-4 DJM-900NXS2...
  • Page 18 • If it is High, go to [3]. ————— Check for the DAC_RESET signal level is • If it is Low, the DAC_RESET signal must be DAC_RESET High. improperly soldered or defective. Check for the IC3201 - pin 27 soldering status of part, or replace it. DJM-900NXS2...
  • Page 19 IC3603 - pins 1, 7 Check for the soldering status of the IC3602, IC3603, or replace it. 4-37 4-38 4-39 4-40 • If an audio signal is output, go to [5]. DJM-900NXS2...
  • Page 20 Check for the soldering status of 4-69 4-70 the IC8202 or its peripheral circuit, or replace it. • If an audio signal is output, go to [8]. DJM-900NXS2...
  • Page 21 • Install the latest version of the driver. PHONO, RETURN) • Check that the settings for the • TRIM control DJM-900NXS2 Utility of the PC are correct. • Channel Level Indicator Loose connection MAIN Assy [Power] [Power] —————...
  • Page 22 • If any connection on the power or signal line is ————— connection improper, correct it. CDCB Assy line from the power source and PANEL • If the signal is normal, go to [2]. UCOM (IC7001) to the X-PAD TOUCH CONTROLLER (IC4902). DJM-900NXS2...
  • Page 23 [9-1] Abnormal function of the crossfader Cause Diagnostics Point Item to be Checked Corrective Action Reference Calibration Calibration Perform calibration in the Test mode to If calibration is not possible or fails, go to [9-2]. 6.1 TEST MODE check if the crossfader functions properly. DJM-900NXS2...
  • Page 24 If no signal is output, soldering of the resistor or [CROSS_FADER signal] diagnostic point while operating the crossfader. PANEL UCOM (IC7001) may be defective. PANEL UCOM R7007, Repair or replace the part with a good one. defective IC7001 - pin 87 same as DJM-900NXS2...
  • Page 25 Except when the audio signal is fixed at Low or AUDIO_CLK (IC3002) may be defective. or High, check the audio signal in the Replace the MAIN Assy. 10-11 10-12 10-13 above-mentioned signal path. IC2009: pins 7 to 9 10-12 10-13 10-14 DJM-900NXS2...

  • Page 26: Information On Power Diagnostics

    1 With the unit turned off, check if the monitored voltages are short-circuited with GND. 2 While monitoring each voltage, turn the unit on in Error Detection OFF mode, then check for an error. Note: Limit the duration of Error Detection OFF mode to no more than 10 seconds at a time. DJM-900NXS2...

  • Page 27: Error Indications

    See [2-7] in "5.2 TROUBLESHOOTING." • Communication error • FLASH rewriting error MAIN UCOM error See [2-1] in "5.2 TROUBLESHOOTING." • FLASH rewriting error Combination of errors E10, E20, and E40 See the item corresponding to each error in "5.2 TROUBLESHOOTING." DJM-900NXS2...

  • Page 28: Connection Check With Each Interface

    Start, Control Panel, System, Hardware, then Device Manager Devices to be added: • Universal Serial Bus controllers USB Composite Device • Under “Sound, video and game controllers” DJM-900NXS2 DJM-900NXS2 • Human Interface Device HID Conformity Device USB Input Device A communication check may be easily performed if connection is made with Device Manager displayed on the PC screen.

  • Page 29: Service Mode

    (Rear panel) Mode 4 COLOR Mode 13 Test Mode POWER ON LINK (Mode 1) Mode 5 Mode 12 Mode 6 Mode 11 Mode 7 Mode 10 Mode 9 Mode 8 Test Mode : CANCEL (Rear panel) POWER SW POWER OFF DJM-900NXS2...
  • Page 30 Display indication SYSTEM SYSTEM PANEL-BOOT PANEL-B MAIN-MAIN MAIN-M MAIN-BOOT1 MAIN-B1 SDSP SRC-DSP MAIN-BOOT2 MAIN-B2 MAIN-UPDATE MAIN-UP SH-BOOT SH-B PANEL PANEL X-PAD X-PAD BEAT c button BEAT BEAT d button d button BEAT BEAT c button c button BEAT d button DJM-900NXS2...
  • Page 31 3rd retry, an acquisition error results. • Any A/D values set in this mode will take effect immediately after they are stored. • Even if an error is generated, setting can be restarted without a mode change. DJM-900NXS2...
  • Page 32 Only after this mode is entered, “ALL SET” is displayed for 1 second at the top of the Main unit display. [Special instructions] • The luminance level of the OLEDs must be maximum. : LEDs lit during All LEDs Lit mode DJM-900NXS2...
  • Page 33 0 dB : RETURN -3 dB Input selector switch CH3 : USB A Channel Level Indicator CH3 12 dB : USB B 9 dB : DIGITAL 6 dB : LINE 3 dB : PHONO 0 dB : RETURN -3 dB DJM-900NXS2...
  • Page 34 -3 dB : TRANS -6 dB : FILTER -9 dB : FLANGER -12 dB : PHASER -15 dB : PITCH -18 dB : SLIP ROLL -21 dB : ROLL -24 dB : VINYL BRAKE -27 dB : HELIX CLIP DJM-900NXS2...
  • Page 35 This mode is also used to check operation of the TIME control. The value displayed on the FL display increases/decreases as you turn the TIME control: Operation range Minimum value Initial value Maximum value Initial value: 0 Maximum value: 100 Minimum value: -100 Turn Turn counterclockwise. clockwise. Correspondence diagram DJM-900NXS2...
  • Page 36 CH4 EQ/ISO HI control CH4 Channel Level Indicator LED "-∞/-26": Lights off "+6": Full Illuminate MIXING control Master Level Indicator L LED "CUE": Lights off "MASTER": Full Illuminate LEVEL control Master Level Indicator R LED "-∞": Lights off "0": Full Illuminate DJM-900NXS2...
  • Page 37 CH4 COLOR control CH4 Channel Level Indicator LED "LOW": Lights off "HI": Full Illuminate SEND/RETURN LEVEL Master Levele Indicator L LED "MIN": Lights off control "MAX": Full Illuminate PARAMETER control Master Levele Indicator R LED "MIN": Lights off "MAX": Full Illuminate DJM-900NXS2...
  • Page 38 For the crossfader, the LEDs light with reference to the minimum and maximum A/D values that have been stored in Crossfader calibration mode. "CFDR SET". If the A/D values are not stored, the immediate A/D values will be used. DJM-900NXS2...
  • Page 39 • The data item for a touched position on the slicer in between the upper and lower X-PADs is expressed as a figure in the range of 0 to 255 and displayed in the 4th row. [Indications] Main unit display Master Level Indicator X-PAD Indicating data for touched positions 1/16 DJM-900NXS2...
  • Page 40 The FX FREQUENCY LOW button is lit during measurement and goes dark when reset. Group 1 Group 2 Group 6 BEAT BEAT d button d button BEAT BEAT c button c button BEAT d button DJM-900NXS2...
  • Page 41 CH1 COLOR control Master Level Indicator L LED The amplitude value is indicated with increment in the number of the indicator LEDs, lit from the LED marked –27. An A/D value (0000 to 1023) is displayed at 5. Main unit display DJM-900NXS2...
  • Page 42 CH4 COLOR control Master Level Indicator L LED The amplitude value is indicated with increment in the number of the indicator LEDs, lit from the LED marked –27. An A/D value (0000 to 1023) is displayed at 5. Main unit display DJM-900NXS2...
  • Page 43 : Group 6 [Special instructions] • As an A/D value that is displayed on the main unit display is the one before a hysteresis-removal process, and as it has an amplitude, an error of about ±2 may be produced. DJM-900NXS2...
  • Page 44 • For operation check of a fader after replacement [Special instructions] • As an A/D value that is displayed on the main unit display is the one before a hysteresis-removal process, and as it has an amplitude, an error of about ±2 may be produced. DJM-900NXS2...
  • Page 45 *2: “EE” is also displayed while the IP address is being obtained. If “EE” is displayed for more than 30 seconds, something is wrong. *3: “EE” is also displayed before the subnet mask data are obtained. [Special instructions] For acquisition of the IP Address and Subnet Mask, the unit must be connected with a PC via a LAN cable. DJM-900NXS2...

  • Page 46: About The Device

    Note on DYW**** The "****" part of the part number changes each time the firmware is updated. Two or more FLASH and SDRAM are mounted in this unit. Please judge the device which you should diagnose in reference to this list. DJM-900NXS2...

  • Page 47: Disassembly

    DAA1220 ×4 DAA1265 ×2 DAA1305 ×12 DAA1205 ×2 White White White White Black Black Black White Black Black White Projection DAA1180 ×1 DAA1198 ×1 DAC2684 ×5 DAC2685 ×5 DNK5888 ×5 DAC2685 White Black White Black DAC2684 Black DNK5888 Gray DJM-900NXS2...
  • Page 48 Note: During reassembly, after attaching the control panel section, open the USB cover then visually inspect to verify that the USB_A and USB_B connectors have been properly attached to each USB panel. (See the next page.) DJM-900NXS2...
  • Page 49 (4) Remove the USBP Assy while sliding it in the direction of the arrow. USBP Assy CN4509 (5) Remove the 3 nuts and 3 washers. (NKX2FTC, DEC2920) ×2 (6) Remove the 2 screws. (PPZ30P080FTB) (7) Remove the 4 screws. (BPZ30P080FTB) • Rear view DJM-900NXS2...
  • Page 50 HPJM Assy ACSW HPJK Assy Assy HPPW Assy SEND Assy REGB Assy SW POWER SUPPLY Assy Reference information Screw tightening order (Stay, Case) Screw tightening order (Rear panel) The other screws are random order. Stay Rear panel Case Stay DJM-900NXS2...
  • Page 51 CN8001 SUPPLY Assy REGB Assy PCB line CN4502 Holder CN4501 Cable tie MAIN Assy USBC Assy USBB Assy CN4801 CN4701 MTRM Assy Locking Locking mini clamp mini clamp CN4852 USBP Assy CN4851 Locking mini clamp CN2002 CN4509 MAIN Assy DJM-900NXS2...
  • Page 52 Slider knob 2 *: During reassembly, fully push down Slider knob 2 until it is Tweezers Protective material dented into Slider knob 1. 4 Remove the slider knob 1. 5 Remove the slider knob stopper. Slider knob 1 Slider knob stopper DJM-900NXS2...
  • Page 53 (4) Disconnect the 2 flxeble cables. (CN4909, 4910) Holder (5) Remove the CDCB Assy. (6) Remove the 2 Matrix OELs. CN4909 CN4910 Flexible cable styling CDCB Assy CN7004 Holder Matrix OEL Pass FFC from this aperture. CN7004 Panel • Bottom view DJM-900NXS2...
  • Page 54 Match the color of a connected connector. FAD1 Assy FAD3 Assy FAD1 FAD4 (White) (Yellow) FAD2 FAD3 (Red) (Blue) FAD2 Assy FAD2 Assy • CROSS FADER Assy (1) Remove the Stay/CRF, by removing the ×2 2 screws. (BPZ30P080FTB) Stay/CRF CROSS FADER Assy DJM-900NXS2...
  • Page 55 USB door Assy Section (3) Remove the 6 holders. (4) Remove the 6 Buttons/CUE. Holder ×6 (5) Remove the 7 Slide SW Caps (W). USB door Assy Section Button/CUE Packing (EF) ×5 Holder ×7 SW Packing (EF) Slide SW Cap (W) DJM-900NXS2...
  • Page 56 (1) Reverse the Control panel Section. (2) Remove the Sheet, by removing the 9 screws. (BBZ30P060FTC) Sheet • Bottom view ×10 (3) Unhook the 3 hooks for FFC styling.. (4) Remove the Sheet, by removing the 10 screws. (BBZ30P060FTC) Sheet • Bottom view DJM-900NXS2...
  • Page 57 (5) Remove the PNLA and PNLB Assemblies, by ×3 removing the 3 screws. (BBZ30P060FTC) PNLA Assy PNLB Assy • Bottom view Screw tightening order Flexible cable styling 6P FFC pass on FFC. Hook Pass FFC from this slit. DJM-900NXS2...

  • Page 58: Each Setting And Adjustment

    • Updating to the latest version of the firmware • Crossfader calibration (See Mode 2: Crossfader calibration mode "CFDR SET" in "6.1 TEST MODE") • CROSS FADER Assy • Crossfader calibration (See Mode 2: Crossfader calibration mode "CFDR SET" in "6.1 TEST MODE") DJM-900NXS2...

  • Page 59: Updating Of The Firmware

    4 After "COMPLETE" is indicated, turn the unit OFF then unplug the USB memory device used for updating. Updating is completed. If updating does not start, restart from downloading of an updater. If updating cannot be started even after the above retry, the USB memory device may be faulty. Retry updating, using another USB memory device. DJM-900NXS2...

  • Page 60: User Setable Items

    –24 dB, –18 dB*, –12 dB, –6 dB MIDI 1* to 16 BUTTON TYPE TOGGLE*, TRIGGER OLED BRIGHTNESS 1 to 3* PC UTILITY OFF*, ON AUTO STANDBY OFF, ON* LOCK OFF, ON* Factory Reset YES / NO* *: Setting upon purchase DJM-900NXS2...
  • Page 61 MIDI OLED BRIGHTNESS BUTTON TYPE 9 10 11 12 13 14 15 16 TOGGLE TRIGGER PC UTILITY AUTO STANDBY LOCK It is not necessary to refrain from contents. Factory Reset Do not perform it before writing in user setting. DJM-900NXS2...

  • Page 62: Exploded Views And Parts List

    Screws adjacent to b mark on product are used for disassembly. For the applying amount of lubricants or glue, follow the instructions in this manual. (In the case of no amount instructions, apply as you think it appropriate.) 9.1 PACKING SECTION LSYXJ only DJM-900NXS2...
  • Page 63 (Quick Start Guide) 6 Operating Instructions See Contrast table (Quick Start Guide) 7 Leaflet See Contrast table (2) CONTRAST TABLE DJM-900NXS2/LSYXJ, UXJCB and XJCN are constructed the same except for the following: DJM-900NXS2 DJM-900NXS2 DJM-900NXS2 Mark Symbol and Description /LSYXJ...

  • Page 64: Exterior Secion

    9.2 EXTERIOR SECION Refer to Nut, Washer: "9.4 CONTROL PANEL SECTION (1/2)" . Accessory of VR UXJCB only PNLA CN7002 PNLA CN7001 PNLB UXJCB only CN7503 UXJCB only Refer to "9.3 BOTTOM SECTION" . DJM-900NXS2...
  • Page 65 NSP 50 Name Label See Contrast table 25 Stay DNF1966 NSP 51 Label See Contrast table (2) CONTRAST TABLE DJM-900NXS2/LSYXJ, UXJCB and XJCN are constructed the same except for the following: DJM-900NXS2 DJM-900NXS2 DJM-900NXS2 Mark Symbol and Description /LSYXJ /UXJCB...

  • Page 66: Bottom Secion

    9.3 BOTTOM SECION PNLA CN7002 USBB PNLA CN4701 CN7001 PNLB CN7503 AINB AINB CN5004 CN5002 USBC CN4801 AINB CN5003 HPJK CN8701 USBP CN4851 HPJM CN6501 DJM-900NXS2...
  • Page 67 34 • • • • • 35 • • • • • 36 Flange Nut M9 DBN1008 37 Washer DEC2920 38 Nut NKX2FTC 39 Screw BBZ30P060FTB 40 Screw BBZ30P060FTC 41 Screw BPZ30P080FTB 42 Screw IBZ30P080FTB 43 Screw IMZ30P040FTC 44 Screw PMH40P080FTC 45 Screw PPZ30P080FTB DJM-900NXS2...

  • Page 68: Control Panel Section (1/2)

    9.4 CONTROL PANEL SECTION (1/2) Refer to "9.5 CONTROL PANEL SECTION (2/2)" . Nut, Washer: Accessory of VR ∗ Nut, Washer: Accessory of VR Nut, Washer: Accessory of VR Refer to "9.5 CONTROL PANEL SECTION (2/2)" . DJM-900NXS2...
  • Page 69 After change Note Stay (DND1286) Lid (DNK6551) Stay (DND1308) Lid (DNK6652) Number of units before change: Point 1 LSYXJ: 4,000 UXJCB: 2,000 XJCN: 100 (The number of units is approximate. Serial number is unavailable.) Point Point 2 Point 3 DJM-900NXS2...

  • Page 70: Control Panel Section (2/2)

    (0.4 to 1 mg per point × 8 points) After applying grease, move the slider base back and forth from one end to the other for approximately 10 to 20 strokes, in order to fully spread the grease. 1 to 4 CDCB CN4906 CRFD CN4001 DJM-900NXS2...
  • Page 71 29 Connector Assy PF03PP2B12 NSP 30 Guide Shaft VK1 DLA1978 31 Lever Plate DNH2954 32 VR Stay DNH2955 33 Slider Base DNK5851 34 Shaft Holder DNK5852 35 • • • • • 36 Screw BPZ20P060FTC 37 Screw CPZ26P080FTC 38 Screw PMH20P040FTC DJM-900NXS2...

Table of Contents

Save PDF