Contents Important �����������������������������������������������������������������������������������������1 Safety ����������������������������������������������������������������������������������������������������������������������������������������������� 1 Electromagnetic fields (EMF) ����������������������������������������������������������������������������������������������������� 3 Recycling ����������������������������������������������������������������������������������������������������������������������������������������� 3 Your Air Performer �������������������������������������������������������������������������4 Product overview ������������������������������������������������������������������������������������������������������������������������� 4 Display overview ��������������������������������������������������������������������������������������������������������������������������� 5 Remote control overview ����������������������������������������������������������������������������������������������������������� 6 Getting started �������������������������������������������������������������������������������7 Installing the filter ������������������������������������������������������������������������������������������������������������������������ 7 Using the remote control for the first time ���������������������������������������������������������������������������� 7 Understanding the Wi-Fi indicator ...
Do not use this device if it has been dropped. • If the power cord is damaged, you must have it replaced by Philips, a service • center authorized by Philips, or similarly qualified persons in order to avoid a...
Page 4
Only use the original Philips filter, otherwise filtration performance cannot be • guaranteed.
Hereby, DAP B.V. declares that the radio equipment type AMF870 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.philips.com. Standard WiFi interface based on 802.11b/g/n/ax at 2.4GHz with a maximum output power of 64mW EIRP.
2 Your Air Performer Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www�philips�com/welcome� Product overview Air outlet (font) Control panel Circulation air outlet (back) Particle sensor Filter (FYM860)
Display overview Control button Power on/off button Display panel Wi-Fi indicator Filter cleaning alert Filter replacement alert PM2.5 display Gas display Auto mode Turbo mode App-operated mode Sleep mode Child lock indicator Circulation function Fan function Heating function Air quality bar...
Remote control overview Fan speed/ temperature selection Function switch* Mode switch** Power on/off Timer Oscillation Long press 3s: Filter reset *Press 3s: Turbo mode ( **Press 3s: Child lock (...
3 Getting started Installing the filter Remove all packaging from the filter before first use. Note: Make sure the Air Performer is unplugged from the electrical outlet before installing the filter. Pull the back cover and remove it from the appliance. Pull out the filter from the appliance. Remove all packaging materials from the air purification filter. Put the filter back into the appliance.
Wi-Fi connection Setting up the Wi-Fi connection for the first time Download and install the Air+ app from the App Store or Google Play� Put the plug of the Air Performer in the power socket and touch to turn on the Air Performer. » The Wi-Fi indicator blinks orange for the first time. Make sure that your smartphone or tablet is successfully connected to your Wi-Fi network.
4 Using the Air Performer Understanding the air quality bar The air quality bar automatically goes on when the Air Performer is switched on, and lights up all colors in sequence. After approximately 30 seconds, the particle sensor selects the color that corresponds to the surrounding air quality of airborne particles.
Gas refers to the level of potential harmful gases (incl. VOC, odors, etc.). Gas level Air quality light color Air quality level Blue Good Blue-purple Fair Purple-red Poor Very poor IAI refers to Indoor Allergen Index (only available through the app) The professional-grade AeraSense sensor detects the level of indoor air allergen and with numerical feedback from 1 to 12 the potential risk level of indoor air allergens can be displayed.
Oscillation Press the button to activate the oscillation feature in your Air Performer, the appliance can oscillate at these angles: 45°, 90°,180°, 270°, 350° and OFF. » The oscillation angle displays on the screen. » If no operation is performed within 3 seconds, the appliance goes back to normal display.
Setting the fan speed/temperature You can manualy set the fan speed or temperature by pressing the arrow button ) on the remote control. In the Fan/Circulation function, press the button to adjust the fan speed, which ranges from 1 to 10� »...
Mode switch You can choose the Auto mode, Sleep mode or App-operated mode by pressing button. Note: The App-operated mode is available ONLY through the app after the Wi-Fi connection is • sucessful� Auto ( ): The appliance automatically Sleep mode ( ): The appliance adjusts settings to deliver the best operates quietly at a low speed. After performance.
Setting the timer With the timer, you can let the appliance operate for a set number of hours. When the set time has elapsed, the appliance will automatically switch off. Press the button repeatedly to choose the number of hours you want the appliance to operate � »...
Cleaning the body of the Air Performer Regularly clean the inside and outside of the Air Performer to prevent dust from collecting� Use a soft, dry cloth to clean both the interior and exterior of the Air Performer • and the air outlet. Cleaning the particle sensor Clean the particle sensor every 2 months for optimal functioning of the appliance.
Pull out the filter from the appliance. Clean the surface of the filter with a vacuum cleaner. Put the filter back into the appliance. Reattach the back cover. Plug the Air Performer into the the power socket. Press the button to switch on the appliance. Press and hold the button for 3 seconds to reset the filter cleaning time.
Pull out the filter from the appliance. Remove all packaging materials from the new filter. Put the new filter into the appliance. Reattach the back cover. Plug the Air Performer into the power socket. Press the button to switch on the appliance. Press and hold the button for 3 seconds to reset the filter lifetime counter.
Page 20
Rotate the battery compartment Take the used battery out from the cover counterclockwise to open it. battery comparment. Insert the new CR2032 battery with Close the battery compartment correct polarities as indicated. cover and rotate it clockwise to close it.
6 Storage Turn off the Air Performer and unplug it from the power socket. Clean the Air Performer, particle sensor and the surface of the filter (see chapter “Cleaning and maintenance”). Let all parts air dry thoroughly before storing. Wrap the filter in air tight plastic bags. Store the Air Performer, filter in a cool, dry location.
Page 22
This is normal. smell. If the appliance produces a burning smell, immediately • unplug it. Please contact your Philips dealer or an authorized Philips service center. The filter may produce an odor after being used for a •...
Page 23
• malfunctioned. Contact the Consumer Care Center in your country. What do the codes 1. Un-plug Philips 3-in-1 Air Purifier from the socket. on my appliance 2. Open the back cover and check whether the filter mean ? package has been removed. If not, please fully remove the filter package, install back to the device, and re-attach the back cover.
Order parts or accessories If you have to replace a part or want to purchase an additional part, go to your Philips dealer or visit www�philips�com/support� If you have problems obtaining the parts, please contact the Philips Consumer Care Center in your country.
Need help?
Do you have a question about the Air Performer AMF870 and is the answer not in the manual?
Questions and answers