Related Manuals for Philips EVNIA 27M1N5500P
Summary of Contents for Philips EVNIA 27M1N5500P
- Page 1 27M1N5500P User manual Customer care and warranty Troubleshooting and FAQs Register your product and get support at www.philips.com/welcome...
-
Page 2: Table Of Contents
6 HDR 16 7. Technical Specifications 17 7.1 Resolution & Preset Modes ..20 8 Power Management 22 9. Customer care and warranty 23 9.1 Philips’ Flat Panel Monitors Pixel Defect Policy ........ 23 9.2 Customer Care & Warranty ..26 10. Troubleshooting & FAQs 27 10.1 Troubleshooting ....... 27... -
Page 3: Important
This electronic user’s guide is intended for anyone who uses the Philips • Remove any object that could fall monitor. Take time to read this user into ventilation holes or prevent manual before you use your monitor. - Page 4 downward by more than -5 degrees. • Oil-based cleaning solutions may If the -5 degree downward tilt angle damage the plastic parts and void maximum is exceeded, the monitor the warranty. damage will not be covered under • Unplug the monitor if you are not warranty.
-
Page 5: Notational Descriptions
1.2 Notational Descriptions Uninterrupted display of still or static images over an extended The following subsections describe the period may cause “burn-in”, also notational conventions used in this known as “after-imaging” or “ghost document. imaging”, on your screen. • “Burn-in”, “after-imaging”, or Notes, Cautions, and Warnings “ghost imaging”... -
Page 6: Disposal Of Product And Packing Material
From the planning, design, and production stages, Philips emphasizes the importance of making products that can easily be recycled. At Philips, end-of-life management primarily This marking on the product or its entails participation in national take-... -
Page 7: Setting Up The Monitor
(1) Gently attach the base to the stand. 27M1N5500P (2) Use your fingers to tighten the Register your product and get support at www.philips.com/welcome screw located at the bottom of the base. (3) Gently attach the stand to the VESA mount area until the latch Earphone-Hang locks the stand. -
Page 8: Operating The Monitor
2.2 Operating the monitor Connecting to your PC Description of the control buttons Press to switch power on. Earphone-Hang Press more than 3 seconds to switch power off. Access the OSD menu. Confirm the OSD adjustment. Adjust the Game Setting. AC/DC power input Adjust the OSD menu. - Page 9 SmartSize Panel Size 17'' (5:4) control keys 19'' (5:4) 19''W (16:10) To access the OSD menu on this Philips 22''W (16:10) 18.5''W (16:9) display, simply use the single toggle 19.5''W (16:9) button located on the rear side of the 20''W (16:9) 21.5''W (16:9)
- Page 10 Turn on MPRT may cause noticeable screen flickering. It is recommended to turn off when you are not using the gaming function. • This Philips monitor is certified with AMD FreeSync™ and NVIDIA® G-Sync® compatible. Both technologies are used to match the refresh rate of the monitor to the graphic cards.
- Page 11 Resolution notification Height adjustment This monitor is designed for optimal performance at its native resolution:2560 x 1440. When the monitor is powered on at a different resolution, an alert is displayed on the screen as follows: Use 2560 x 1440 for best results. 130mm Display of the native resolution alert can be switched off from Setup in the OSD...
-
Page 12: Remove The Base Assembly For Vesa Mounting
2.3 Remove the Base Assembly for VESA Mounting Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 0° 90° 1. Place the monitor face down on a -5° smooth surface. Pay attention not to * Display design may differ from those scratch or damage the screen. -
Page 13: Image Optimization 11
Racing, RTS, Gamer 1, Gamer 2, LowBlue in real-time. Whether you're working Mode, EasyRead, Smartuniformity and with text applications, displaying images, Off. or watching a video, Philips SmartImage delivers great monitor performance. Why do I need it? ... - Page 14 LED displays can cause eye damage and affect vision over time. Developed for well-being, the Philips LowBlue Mode setting uses • HDR Game: Ideal setting to optimize smart software technology to reduce for playing video games. With harmful shortwave blue light.
-
Page 15: Smartcontrast
3.2 SmartContrast What is it? It is a unique technology that dynamically analyzes displayed content and automatically optimizes a monitor's contrast ratio for maximum visual clarity and viewing enjoyment. Why do I need it? Because SmartContrast offers the best visual clarity and viewing comfort for every type of content. -
Page 16: Amd Freesync™ Premium 14
4. AMD FreeSync™ AMD Radeon R9 285 • AMD Radeon R7 260X Premium • AMD Radeon R7 260 • ■ Processor A-Series Desktop and Mobility APUs AMD A10-7890K • AMD A10-7870K • PC gaming has long had an imperfect AMD A10-7850K •... -
Page 17: Nvidia® G-Sync
• For best output performance, please always ensure that your graphic card is capable of achieving the maximum resolution and refresh rate of this Philips display. • NVIDIA® G-SYNC® support interface: DisplayPort. • Make sure your graphic card supports NVIDIA® G-SYNC®. -
Page 18: Hdr 16
6. HDR HDR Settings in Windows10 system. Steps 1. Right-click on the desktop, and enter Display settings. 2. Select the display/monitor. 3. Select an HDR-capable display under Rearrange your displays. 4. Select Windows HD Color settings. 5. Adjust Brightness for SDR content. Note Windows 10 edition is required. -
Page 19: Technical Specifications 17
7. Technical Specifications Picture/Display Monitor Panel Type IPS Technology Backlight W-LED Panel Size 27" W (68.5 cm) Aspect Ratio 16:9 Pixel Pitch 0.2331 (H) mm x 0.2331 (V) mm Contrast Ratio(typ.) 1000:1 Recommended 2560 x 1440 @ 60 Hz Resolution 2560 x 1440 @ 144 Hz (HDMI) Maximum Resolution 2560 x 1440 @ 260 Hz (DP) - Page 20 Stand Tilt -5 / +20 degree Swivel -45 / +45 degree Height adjustment 130 mm Pivot -90 / +90 degree Power AC Input Voltage AC Input Voltage AC Input Voltage Consumption at 100VAC , 60Hz at 115VAC , 60Hz at 230VAC, 50Hz Normal Operation 27.5 W (typ.) 27.5 W (typ.)
- Page 21 Black Finish Texture Note The data mentioned in this section is subject to change without notice. Go to www. philips.com/support to download the latest version of the leaflet. 2. SmartUniformity and Delta E information sheets are included in the box.
-
Page 22: Resolution & Preset Modes
For best output performance, please (kHz) always ensure that your graphic card 31.47 720 x 400 70.00 is capable of achieving the maximum resolution and refresh rate of this Philips 31.47 640 x 480 60.00 display. 35.00 640 x 480 67.00... - Page 23 Display Input Format RTX 3080 422/420 444/RGB 422/420 444/RGB HDMI 2.0 HDMI 2.0 DP 1.4 DP 1.4 2560 x1440 260Hz 10bits 2560 x 1440 240Hz 10bits 2560 x 1440 144Hz 10bits 2560 x 1440 120Hz 10bits 2560 x 1440 120Hz 8bits 2560 x 1440 60Hz 10bits...
-
Page 24: Power Management 22
8 Power Management If you have a VESA DPM compliance display card or software installed on your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse, or other input device is detected, the monitor will 'wake up' automatically. -
Page 25: Customer Care And Warranty 23
Other Pixel Defect Policy combinations of lit and dark sub-pixels appear as single pixels of other colors. Philips strives to deliver the highest quality products. We use some of the Types of Pixel Defects industry's most advanced manufacturing... - Page 26 To qualify for repair or replacement due to pixel defects during the warranty Black Dot Defects period, a TFT Monitor panel in a Philips Black dot defects appear as pixels or flat panel monitor must have pixel sub-pixels that are always dark or 'off'.
- Page 27 BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* >15mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 3 or fewer 2 adjacent dark subpixels 2 or fewer...
-
Page 28: Customer Care & Warranty
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below. -
Page 29: Troubleshooting & Faqs 27
FAQs steps • Disconnect the monitor from mains power source immediately for safety 10.1 Troubleshooting • Contact with Philips customer service This page deals with problems that can representative immediately. be corrected by a user. If the problem Imaging Problems... -
Page 30: General Faqs
Service contact information listed in set at 2560 x 1440. the Important information manual • Shut down your computer, and contact a Philips customer service disconnect your old monitor, and representative. reconnect your Philips QD OLED * Functionality is different according to monitor. - Page 31 PC, workstation, hexane, etc. or Mac? Can I change the color setting of Ans.: Yes. All Philips QD OLED my monitor? monitors are fully compatible with standard PCs, Macs, and workstations. You may need a...
- Page 32 Ans.: Your LCD monitor monitor works information. best at its native resolution of 2560 x 1440. For the best display, Q10: Are Philips LCD monitors Plug- please use this resolution. and- Play? Ans.: Yes, the monitors are Plug-and- Q13: How to unlock/lock my hotkey? Play compatible with Windows Ans.: Please press...
- Page 33 This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
Need help?
Do you have a question about the EVNIA 27M1N5500P and is the answer not in the manual?
Questions and answers