GE HTW200BMKWW Owner's Manual & Installation Instructions

Hide thumbs

page of 30

/ 30
Bookmarks

Quick Links

Download this manual

Printed in Mexico

Safety Instructions

. . . . . . . . . . 2, 3

Operating Instructions

Care and Cleaning

of the Washer . . . . . . . . . . . . . . . . . . . . 13

Features . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Loading and Using

the Washer . . . . . . . . . . . . . . . . . . . . . . 11

Operating instructions . . . . . . . . .4–10

Installation Instructions

Troubleshooting Tips

. . . . . 19–24

Consumer Support

Consumer Help Indicator . . . . . . . . . 10

Consumer Support . . . . . . . . . . . . . . . . 26

Parts and Accessories. . . . . . . . . . .3, 26

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Write the model and serial

numbers here:

Model # _____________

Serial # ______________

You can find

them under

the lid of the

washer.

. 14–18

English/Français/Español

Owner's Manual &

Installation Instructions

HTW200BMKWW

MTW200BMKWW

29-6074

Need help?

Do you have a question about the HTW200BMKWW and is the answer not in the manual?

Questions and answers

Summary of Contents for GE HTW200BMKWW

Page 1 Washer ....13 HTW200BMKWW Features ......12...
Page 2 IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill you or hurt you and others. All safety messages will follow the safety alert symbol and the word “DANGER”, “WARNING”, or “CAUTION”. These words are defined as: DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Page 3 Order on-line at GEApplianceparts.com today, 24 hours a DO NOT remove ground prong. day or by phone at 800.626.2002 during normal business hours. In Canada, visit your local GE parts distributor or call DO NOT use an adapter. 800.661.1616. DO NOT use an extension cord.
Page 4 See page 11 • Add the manufacturer’s option (on some for suggested loading recommended amount of models) when using examples. detergent. GE recommends fabric softener. the use of High Efficiency • Close lid. • Select options. detergents such as in your NOTE: Washer will not start energy efficient washer.
Page 5 Operating instructions. Start/Pause Press Start to begin the cycle. NOTE: The lid must be closed for the washer to start the cycle. If the lid is closed, the lid will lock and the Lid Locked light will illuminate. Pressing Pause will unlock the lid (if locked at that time), pause the cycle and the Pause indicator light will blink. To continue the cycle, press Start again.
Page 6 GEAppliances.com Wash Cycles-Cycle Selector Knob The wash cycle controls the type of washing process. The cycle selector knob can be turned in either direction. Turning the knob after starting a cycle will stop the washer and change the cycle/options to the new selection. Press Start to begin the new cycle selection. The chart below will help you match the items to be washed with the best wash cycle settings.
Page 7 Operating instructions. Wash Cycles-Cycle Selector Knob - Continued Items to Wash Cycle Wash Temp Soil Level Spin Selection Options Available Cycle Details Small loads of Speed Ex. Heavy Max/Extra Stain PreTreat Guide Utilizes an expedited wash period and lightly soiled items Wash Warm Heavy...
Page 8 Lid Locked light will flash if 3 cycles have been started without opening the lid. The washer will not start another cycle until the lid is opened. Try opening, then closing the lid and starting a new cycle. If the problem persists, call 800.GE.CARES (800.432.2737) for service.
Page 9 Loading and using the washer. GEAppliances.com Always follow fabric manufacturer’s care label when laundering. WARNING - Fire Hazard Never place items in the washer that are dampened with gasoline or other flammable liquids. No washer can completely remove oil. Do not dry anything that has ever had any type of oil on it (including cooking oils). Doing so so can result in death, explosion, or fire.
Page 10 About washer features. Automatic Load Sensing (on some models) This determines the correct agitate profile, agitate duration and amount of water suited to the size and type of load placed in the washer. The washer will not start the wash cycle or fill with water if the lid is open. When the lid is closed the machine is able to begin filling with water in order to sense the load size.
Page 11 Care and cleaning of the washer. GEAppliances.com Exterior of the Washer Immediately wipe off any spills with a damp cloth. Interior of the Washer Leave the lid open after washing to allow moisture to evaporate. If you want to clean the basket, use a clean soft cloth dampened with liquid detergent;...
Page 12 Installation Washer Instructions If you have any questions, call 800.GE.CARES (800.432.2737) GEAppliances.com or visit our Website at: In Canada, call 1.800.561.3344 www.GEAppliances.ca or visit This is the safety alert symbol. This symbol alerts you to potential hazards that can kill you or hurt you and others.
Page 13 Installation Instructions LOCATION OF YOUR WASHER Do Not Install the Washer: IMPORTANT: Minimum Installation Clearances - Alcove or Closet 1. In an area exposed to dripping water or outside • If your washer is approved for installation in an alcove weather conditions.
Page 14 Installation Instructions CONNECT WATER HOSES TO OUTLET CONNECT WATER HOSES TO WASHER VALVES Disconnect electrical cord before installing water hoses. If not installed, install rubber washer in one end of hot water hose. Determine which is HOT water line before attaching water Thread hot water hose onto connection labeled H at top rear of hoses to faucets.
Page 15 Installation Instructions CONNECT TO DRAIN The drain or standpipe must be capable of accepting a discharge at a rate of 16 galper minute. The drain height must be 33” minimum and 96” máximum. The standpipe diameter must be 1-1/2” minimum. There MUST be an air gap around the drain hose in the stand pipe.
Page 16 Installation Instructions ELECTRICAL REQUIREMENTS GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of WARNING - Fire Hazard malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance Plug into a grounded 3-prong outlet. for electric current.
Page 17 Before you call for service…Troubleshooting Tips Save time and money! Review the charts on the following pages, or visit GEAppliances.com. You may not need to call for service. WATER Possible Causes What To Do Small amount of water Normal dispenser It is normal for a small amount of water to remain in dispenser after the remaining in dispenser operation...
Page 18 Before you call for service…Troubleshooting Tips Save time and money! Review the charts on the following pages, or visit GEAppliances.com. You may not need to call for service. WATER Possible Causes What To Do Water pumped out Lid lifted or cycle was put Reset cycle.
Page 19 GEAppliances.com OPERATION Possible Causes What To Do Residual powder in Wash water too cold or low Select a warmer wash temperature if possible to improve dissolving of dispenser or clogging home water pressure detergent or use liquid detergent. Make sure siphon caps are free of debris of dispensers (on some and fully pressed into position.
Page 20 Before you call for service…Troubleshooting Tips Possible Causes What To Do PERFORMANCE Colored spots Incorrect use of fabric Check fabric softener package for instructions and follow directions for softener using dispenser. Make sure you have selected the Deep Rinse option. Pretreat stain and rewash using Speed Wash cycle before drying.
Page 21 GEAppliances.com PERFORMANCE Possible Causes What To Do No spin selected Select a spin option. Clothes too wet Incorrect cycle selected Make sure the cycle selected matches the load you are washing. Some fabrics will feel wetter when rinsed with cold water. Wash load out of balance Redistribute load in washer and run through Drain &...
Page 22 Before you call for service…Troubleshooting Tips SOUNDS Possible Causes Reason “Clicking” Shifter mechanism is The drive system will engage at the start of agitate and disengage when engaging or disengaging agitate is complete. This occurs multiple times during the wash. Back and forth Electric motor reversing This sound is the motor rotating back and forth to clean your laundry.
Page 23 This warranty is extended to the original purchaser and any succeeding owner for products purchased for home use within the USA. If the product is located in an area where service by a GE Authorized Servicer is not available, you may be responsible for a trip charge or you may be required to bring the product to an Authorized GE Service location for service.
Page 24 In Canada, consult your local listings for your nearest GE parts distributor or call 1.800.661.1616 Contact Us GEAppliances.com In the U.S.: If you are not satisfied with the service you receive from GE, contact us on our Website with all the details including your , r e e t i : o t...
Page 25 Caractéristiques ......12 Chargement et utilisation de la laveuse . . . 11 HTW200BMKWW Entretien et nettoyage de la laveuse ..13 MTW200BMKWW Utilisation .
Page 26 CONSIGNES DE SÉCURITÉ IMPORTANTES. LISEZ TOUTES LES INSTRUCTIONS AVANT D’UTILISER VOTRE APPAREIL. Il s'agit du symbole d'avertissement de sécurité. Il vous avertit des dangers potentiels qui pourraient provoquer la mort ou des blessures, à vous ou à autrui. Tous les messages de sécurité suivent ce symbole d'avertissement de sécurité et les mots «...
Page 27 10 secondes avant de poursuivre. LORSQUE L'APPAREIL N'EST PAS UTILISÉ Fermez les robinets d'eau pour réduire les fuites en cas de tuyau cassé. Vérifiez l'état des tuyaux de remplissage. GE recommande de les remplacer tous les 5 ans. CONSERVEZ CES INSTRUCTIONS...
Page 28 • Ajoutez la quantité de détergent Deep Rinse (rinçage la performance de lavage. recommandée par le fabricant. en profondeur) (sur Consultez la page 11 pour GE recommande l’utilisation certains modèles) lors obtenir des suggestions de de détergents Haute Efficacité de l’utilisation d’un chargement.
Page 29 Operating instructions. Start/Pause (départ/pause) Appuyez sur Start (départ) pour lancer le programme. REMARQUE : Le couvercle doit être fermé pour que la laveuse pour démarrer le cycle. Si le couvercle est fermé et le voyant Lid Locked (couvercle verrouillé) s’allumera. Une pression sur Pause déverrouillera le couvercle (s’il est verrouillé...
Page 30 www.electromenagersGE.ca Programmes de lavage - Bouton de sélection de programme Le programme de lavage commande le type de processus de lavage. Le bouton de sélection de programme peut être tourné vers la droite ou la gauche. La rotation du bouton de sélection de programme après le début d'un programme arrête la laveuse et règle le programme/les options sur le nouveau programme sélectionné.

This manual is also suitable for:

Mtw200bmkww