Download Print this page

JVC KD-AVX2 Instructions Manual

JVC KD-AVX2 Instructions Manual

Dvd/cd receiver

Hide thumbs Also See for KD-AVX2:

Instructions manual (267 pages)

,

Instruction manual (189 pages)

,

Installation & connection manual (6 pages)

Table of Contents

Advertisement

Quick Links

DVD/CD RECEIVER

RECEPTOR CON DVD/CD

RÉCEPTEUR DVD/CD

For canceling the display demonstration, see page 10.

Para cancelar la demonstración en pantalla, consulte la página 10.

Pour annuler la démonstration des affichages, référez-vous à la page 10.

For installation and connections, refer to the separate manual.

Para la instalación y las conexiones, refiérase al manual separado.

Pour l'installation et les raccordements, se référer au manuel séparé.

EXTRA MONITOR CONTROL

MODE

ASPECT

MENU

DVD / RECEIVER CONTROL

ZOOM

ATT

+10

SOURCE

–100

+100

BAND

–10

DIRECT

DUAL

ASPECT

OSD

1

2

3

VOL

DISC+

TOP M

MENU

2nd VOL

4

5

6

ENTER

7

8

9

DISC–

SETUP

RETURN

0

SURROUND

SHIFT

RM-RK240

INSTRUCTIONS

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

KD-AVX2

SRC

D

DISP

For customer Use:

Enter below the Model

No. and Serial No. which

are located on the top or

bottom of the cabinet.

Retain this information for

future reference.

Model No.

Serial No.

KD-AVX2

KD-AVX2

KD-AVX2

ASPECT

MENU

A

7 / BACK

BAND

ENT

LVT1454-001A

[J]

Table of Contents

Advertisement

Chapters

Table of Contents

Troubleshooting

Need help?

Need help?

Do you have a question about the KD-AVX2 and is the answer not in the manual?

Questions and answers

Summary of Contents for JVC KD-AVX2

Page 1 DVD/CD RECEIVER KD-AVX2 RECEPTOR CON DVD/CD KD-AVX2 RÉCEPTEUR DVD/CD KD-AVX2 EXTRA MONITOR CONTROL MODE ASPECT MENU DVD / RECEIVER CONTROL ASPECT KD-AVX2 ZOOM MENU SOURCE –100 +100 BAND –10 DIRECT DISP DUAL ASPECT DISC+ TOP M MENU 2nd VOL ENTER 7 / BACK DISC–...
Page 2: How To Reset
Caution: For safety..Changes or modifications not approved • Do not raise the volume level too much, as by JVC could void the user’s authority to this will block outside sounds, making driving operate the equipment. dangerous. • Stop the car before performing any IMPORTANT FOR LASER PRODUCTS complicated operations.
Page 3 WARNINGS: Caution on volume setting: • DO NOT install any receiver in locations Discs produce very little noise compared where; with other sources. Lower the volume – it may obstruct the steering wheel and before playing a disc to avoid damaging gearshift lever operations, as this may the speakers by the sudden increase of the result in a traffic accident.
Page 4 Introduction—Playable discs Discs you can play Discs cannot be played back You can play back the following discs—12 cm DVD-ROM (data), DVD-RAM, DVD-R/DVD- (4-3/4") and 8 cm (3-3/16")—on this receiver: RW recorded in the DVD-VR format, CD- • DVD Video: Recorded in NTSC color system ROM, CD-I (CD-I Ready), Photo CD, etc.
Page 5: Table Of Contents
Contents How to read this manual The following methods are used to make the Control panel ....... 6 explanations simple and easy-to-understand: Remote controller — ..7 RM-RK240 • Some related tips and notes are explained Getting started ......10 in “More about this receiver”...
Page 6: Control Panel
Control panel Parts identification Monitor indications Ex.: Source screen on JPEG playback ASPECT KD-AVX2 MENU DISP 7 / BACK BAND Monitor indications (standby/on attenuator) button 2 • +/– (volume +/–) button r Source indicator • SRC (source) button t Main display •...
Page 7: Remote Controller
How to detach/attach the control panel Detaching... Attaching... How to change the control panel angle Angle 3 Angle 4 Angle 1 Angle 2 Caution: Do not insert your finger behind the control panel. Remote controller — RM-RK240 Installing the lithium coin battery Before using the remote controller: (CR2025) •...
Page 8: Dual Button
Warning: IMPORTANT: • Do not install any battery other than If Dual Zone is activated (see page 30), CR2025 or its equivalent; otherwise, it may the remote controller only functions for explode. operating the DVD/CD player. • Store the battery in a place where children cannot reach to avoid risk of accidents.
Page 9 23). For Satellite radio operations: • 5 / ∞ Controllable only if your monitor is one of the JVC monitors — KV-MR9010 or – Changes the categories. • 4 / ¢ KV-MH6510. Th ese buttons function as the number buttons –...
Page 10: Getting Started
Getting started Adjust the equalizer as you want. (See pages 38.) Basic operations To drop the volume in a moment (ATT) Turn on the power. To restore the sound, press it again. Ÿ To turn off the power DISP Canceling demonstration and setting You cannot select some sources if they the clock are not ready.
Page 11 • See the example on “Basic procedure of AV Finish the procedure. Menu operation” below to change the clock from 12 hours to 24 hours. Basic procedure of AV Menu operation You can adjust various settings of the unit from AV Menu. Ex.: To change the clock from 12 hours to 24 •...
Page 12: Radio Operations
When an FM stereo broadcast is hard to Radio operations receive MENU DISP TUNER (FM1/2/3,AM) 2 Select “Mode”, “Mono”, then “On”. Ÿ 7 / BACK BAND Selected band appears. 3 Finish the procedure. Lights up when receiving an FM stereo broadcast with sufficient Lights up when monaural mode is activated.
Page 13 3 Finish the procedure. Manual presetting After tuning in the station you want to preset... MENU Lights up when “Local” mode is activated. Select “List”, then a preset number Only stations with sufficient signal strength (1–6) you want to store the station will be detected.
Page 14 • You can change the preset list between Listening to a preset station FM1/2/3 by pressing and holding 5/∞ buttons (or by pressing 5/∞ buttons repeatedly) when selecting any of the FM bands. DISP TUNER (FM1/2/3,AM) 7 / BACK BAND When using the remote controller...
Page 15: Disc Operations
The following marks are used to indicate Disc operations the playable discs... Playing a disc in the receiver Audio The disc type is automatically detected, and DVD Video DVD Audio Video CD with/without playback starts automatically (for DVD Video/ Audio: automatic start depends on its internal JPEG program).
Page 16 • When inserting a DVD video/DVD Audio • When inserting an MP3/WMA/WAV/JPEG/ disc: MPEG disc* Video/picture playback starts automatically After showing the total folder and file on the monitor when the parking brake is number... applied. Ex.: When an WAV file is detected •...
Page 17 Basic operations Operations Monitor indication and/or next operation To stop playback When you start playback again, playback starts from where it has been stopped 7 / BACK (Resume play). BAND To stop play temporarily Playback is paused. A still picture appears. MPEG MPEG A Frame by frame playback...
Page 18 To go to the next or previous chapters/tracks To locate a particular title/group/ chapter/track directly • For DVD: During play or pause • For DVD Video/DVD Audio: During play or pause—select a chapter/ track. During stop—select a title/group. • For MP3/WMA/WAV/JPEG/MPEG: Select a track within the same folder.
Page 19 To locate a particular title/ To skip to the next or previous scene MPEG MPEG group/folder Audio You can skip the scene back and forward by 5 minutes. MPEG MPEG JPEG Ex.: when you are playing a 24-minute MPEG Within 10 seconds, file and the elapsed playing time is 8’24”...
Page 20: Unique Disc Functions
Unique disc functions Selecting subtitles You can select the language of the subtitle to be shown on the monitor. Selecting audio languages • You can set the initial subtitle language using the AV Menu (see page 34). For DVD: You can select the language to listen to if the disc has multiple audio languages.
Page 21 Canceling the PBC playback Disc menu operations Menu-driven playback is possible while playing back a DVD with menu-driven features or a VCD with the PBC (PlayBack Control). 2 Select a track to start normal playback using the number buttons (see page 9). While playing a DVD Audio To resume the PBC function...
Page 22: Disc Surround Playback
Playing back a bonus group Selecting Browsable still pictures Some DVD Audio discs have a special While playing back a track linked to group called “bonus group” whose browsable still pictures (B.S.P.), you can Audio Audio contents are not open to the public. select (turn the page) the still picture to be •...
Page 23 *1: Manufactured under license from Dolby *1 No sound comes out of the rear speakers Laboratories. Dolby, Pro Logic, MLP Lossless, and the subwoofer when the FRONT 2CH and the double-D symbol are the trademarks indicator appears on the monitor. of Dolby Laboratories.
Page 24: On-Screen Disc Operations
On-Screen disc operations Operations using the on-screen bar You can check the disc information and use some functions through MPEG JPEG MPEG the on-screen bar. Audio On-screen bar T02-C03 TOTAL 1:25:58 Information DVD -V C. RPT TIME TITLE CHAP Operation Disc type Remaining time of the current •...
Page 25 To search for a particular point by playing Basic on-screen bar operations time 1 Select Display the on-screen bar. 2 Enter the elapsed playing time of the current title or of the disc. (twice) DVD -V T02-C03 TOTAL 1:25:58 C. RPT TIME TITLE CHAP...
Page 26 8 Track information (Not appears on JPEG/ Basic control screen operations MPEG playback) 9 Track (file) list You can search for and play the desired items p Current track (file) (highlighted bar) through the control screen when using the external monitor. To select a folder or track MPEG MPEG...
Page 27 While Dual Zone is on and the disc play stops... List screen operations Display the folder list. Each time you press the button, You can display the folder list/track list before the list screen comes on and starting play when using the external monitor goes off.
Page 28: Other Disc Operations
Repeat Other disc operations • For VCD: While PBC (see page 21) is not Selecting the playback modes in use. You can use only one of the following playback Mode Plays repeatedly modes at a time. Chapter* The current chapter. MENU •...
Page 29: Other Operations
List screen operations Other operations You can display the folder list/file list and select Monitor indication control a file directly while playing. To change monitor indication Audio MPEG JPEG MPEG While playing..DISP MPEG MPEG JPEG MENU (On the unit) •...
Page 30: Dual Zone Operations
The surround effect is also added to the sound Through the 2nd AUDIO OUT, 2 channel from the speakers when you select “DISC” as signal is emitted. When playing a multi- the source. channel encoded disc, multi-channel signals JVC original headphone virtual surround are downmixed. system.
Page 31: Av Menu Settings
AV Menu settings adjust the item selected. Basic procedure You can adjust various settings of this unit from the AV Menu. The AV Menu contains the menu items and submenus shown on the figure below. Repeat steps to adjust other MENU items if necessary.
Page 32 AV Menu items Indications Selectable settings, [reference page] Demonstration Oﬀ : Cancels. [Initial]; Activates the demonstration movie on the monitor. You can select the background picture of the monitor. Wall Paper Standard [Initial], Rose, Gold, Black, Metal, Metalic-Silver, Metalic-Green, Honeycomb-Red, Honeycomb-Green, Effect-Orange, Effect-Purple, Clown fish, Ocean, Sunset, Earth.
Page 33 Indications Selectable settings, [reference page] You can change the screen shape on the monitor according Aspect to the aspect ratio of the source. Choose the optimum one from the followings. Aspect ratio of incoming signal 16:9 Normal: For original shape of 4:3 Full: [Initial];...
Page 34 Indications Selectable settings, [reference page] Time Zone* Select your residential area from one of the following time zones for clock adjustment. Eastern [Initial] “ Atlantic “ Newfound “ Alaska “ Pacific “ Mountain “ Central “ (back to the beginning) Menu Language Select the initial disc menu language.
Page 35 Indications Selectable settings, [reference page] You can enjoy a powerful sound at low or middle volume D. (Dynamic) Range Compres. levels while playing a Dolby Digital software. (Compression) • AUTO : Select this to apply the effect to multi-channel encoded software (excluding 1-channel and 2-channel software).
Page 36 Indications Selectable settings, [reference page] You can adjust the output level of each speaker monitoring Speaker Level the test tone. Press and hold ENT to activate (or cancel) the test tone. • Front Lch/Center ch/Front Rch/Rear Rch/Subwoofer* /Rear Lch: adjust the output level of each speaker in the range of –10dB –+10dB.
Page 37 Indications Selectable settings, [reference page] IF Band Width In some areas, adjacent stations may interfere with each other. If this interference occurs, noise may be heard. Auto: [Initial]; Increases the tuner selectivity to reduce interference noises between adjacent stations. (Stereo effect may be lest.) Wide: Subject to the interference from adjacent stations, but sound quality will not be degraded and the stereo...
Page 38 Indications Selectable settings, [reference page] Changer/iPod/D. Player * External Input [Initial]; To use a JVC CD changer, satellite radio, iPod, JVC D. player, etc. [42, 44, 50] External Input: To use any external component other than above. [49] You can deactivate the key-touch tone if you do not want it Beep to beep each time you press a button.
Page 39 Indications Selectable settings, [reference page] Adjust fader—speaker output balance between the front and Fader/Balance rear speakers. •Upmost—front only •Downmost—rear only When using a two-speaker system, set the fader to the center (00). Adjust balance—speaker output balance between the left and right speakers.
Page 40 Indications Selectable settings, [reference page] Ampliﬁ er Gain You can change the maximum volume level of this receiver. Ampliﬁ er Oﬀ : Deactivates the built-in amplifier. Low Power: VOL 00 – VOL 30 (Select this if the maximum power of the speaker is less than 50 W to prevent the speaker from being damaged.) High Power: [Initial];...
Page 41: Other Main Functions
Assign a title. Other main functions 1 Select a character set. DISP Assigning titles to the sources You can assign titles to station frequencies and CDs (both in this receiver and in the CD 2 Select a character. changer), and change the source names of AV- INPUT and EXT-INPUT.
Page 42: Cd Changer Operations
CD changer operations Select a disc. MENU About the CD changer It is recommended to use the JVC MP3- compatible CD changer with your unit. Select “List”, then the disc you want to • Disc text information recorded in the CD play back.
Page 43 To go to the next or previous folders (only for Selectable modes MP3 discs) Deactivates Intro/Repeat/Random playback. Intro Mode Plays the first 15 seconds of Track: All tracks of the inserted discs. • lights up. Folder*: First tracks of all folders in the When using the remote controller..
Page 44: Satellite Radio Operations
(See GCI update on the left • “SIRIUS” and the SIRIUS dog logo are column.) registered trademarks of SIRIUS Satellite Radio • Once completed, JVC DLP tunes in to Inc. the preset channel, CH184 (channel for • XM and its corresponding logos are registered subscription guidance).
Page 45 3 Check your XM Satellite radio ID labeled Select a channel for listening. on the casing of the XMDirect TM Universal Tuner Box, or tune in to “Channel 0” (see page 46). 4 Contact XM Satellite radio on the internet Pressing and holding these buttons change at <http://xmradio.com/activation/>...
Page 46 Select a channel for listening from the Listening to the XM Satellite Radio selected category. DISP 7 / BACK BAND If no operation is done for about Select a channel for listening. 15 seconds, Category Search is canceled. • While searching, invalid and unsubscribed channels are skipped.
Page 47 Storing channels in memory Listening to a preset channel You can preset six channels for each band. DISP Tune in to a channel you want. MENU 7 / BACK BAND Select “List” then “Preset List”. 7 / BACK BAND Select a preset number (1 – 6) you MENU want to store the channel into.
Page 48 List screen operations How to display the artist name and song title You can select a category or channel from the list on the screen. DISP While selecting SAT as the source..MENU Each time you press D DISP, indication changes between category/channel names and artist name/song title.
Page 49: External Component Operations
Adjust the volume. External component operations Playing an external component You can connect an external component to Adjust the equalizer as you want. (See LINE IN plug and VIDEO IN plug on the rear, pages 38.) or to the CD changer jack on the rear using the KS-U57 Line Input Adapter (not supplied) or KS-U58 AUX Input Adapter (not supplied).
Page 50: Ipod®/D. Player Operations
Adjust the volume. This unit is ready for operating an Apple iPod or a JVC D. player from the control panel. • You can also use the equivalent buttons on the remote controller in the operations below.
Page 51 Select “Mode”, then your desired Selecting a track from the menu playback mode. Enter the main menu of the iPod or D. player. Now the 5/∞/ 4/¢ buttons Finish the procedure. work as the menu selecting buttons* Select the desired menu. Selectable modes For iPod: Deactivates Repeat/Random playback.
Page 52: Maintenance
To keep discs clean Maintenance A dirty disc may not play correctly. If a disc does become dirty, wipe it How to clean the connectors with a soft cloth in a straight line from center to edge. Frequent detachment will deteriorate the •...
Page 53: Language Codes
Language codes Code Language Code Language Code Language Afar Inupiak Kirundi Abkhazian Indonesian Rumanian Afrikaans Icelandic Kinyarwanda Ameharic Hebrew Sanskrit Arabic Yiddish Sindhi Assamese Javanese Sangho Aymara Georgian Serbo-Croatian Azerbaijani Kazakh Singhalese Bashkir Greenlandic Slovak Byelorussian Cambodian Slovenian Bulgarian Kannada Samoan Bihari Korean (KOR)
Page 54: More About This Receiver
More about this receiver Basic operations Disc operations Turning on the power General • By pressing SRC on the receiver, you can also • In this manual, words “track” and “file” are turn on the power. interchangeably used when referring to the music/picture/movie files and their file names.
Page 55 Playing a Recordable/Rewritable disc Playing an MP3/WMA/WAV disc • Use only “finalized” discs. • This receiver can play back MP3/WMA/WAV • This receiver can play back either MP3/ files with the extension code <.mp3>, <.wma> WMA/WAV files, JPEG files, or MPEG or <.wav>...
Page 56 • This receiver can play back the files recorded Playing an MPEG disc in VBR (variable bit rate). • This receiver can play back MPEG 1/2 files The files recorded in VBR have a discrepancy with the extension code <.mpg>. in elapsed time display, and do not show •...
Page 57 Satellite radio operations • The text information may not be displayed correctly. • You can also connect the JVC SIRIUS radio – Some characters such as accented letters PnP (Plug and Play), using the JVC SIRIUS cannot be shown correctly on the display.
Page 58 On-screen guide icons During play, the following guide icons may appear for a while on the monitor. : Appears at the beginning of a scene containing multi-audio languages (for DVD only). : Appears at the beginning of a scene containing multi-subtitle languages (for DVD only). : Appears at the beginning of a scene containing multi-angle views (for DVD only).
Page 59: Troubleshooting
Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Remedies/Causes • Sound cannot be heard from the • Adjust the volume to the optimum level. speakers. • Check the cords and connections. Check the cords and connections.
Page 60 Symptoms Remedies/Causes • No picture appears on the external • Connect the video cord correctly. monitor at all. • Select a correct input on the monitor. • The edges of the picture are missing • Select an aspect other than “Zoom”. (See page on the screen.
Page 61 Symptoms Remedies/Causes • “No Disc” appears on the monitor. • Insert a disc into the magazine. • Insert disc correctly. • “No Magazine” appears on the Insert the magazine. monitor. • “Reset08” appears on the monitor. Connect this receiver and the CD changer correctly and press the reset button of the CD changer.
Page 62 Symptoms Remedies/Causes • The iPod or D. player does not turn • Check the connecting cable and its connection. on or does not work. • Update the firmware version of the D. player. • Charge the battery of the iPod/D. player. •...
Page 63: Specifications
Specifications AUDIO AMPLIFIER SECTION [AM Tuner] Sensitivity: 20 μV Selectivity: 35 dB Power Output: 20 W RMS × 4 Channels at 4 Ω and ≤ 1% THD+N DVD/CD PLAYER SECTION Signal to Noise Ratio: Signal Detection System: Non-contact optical 80 dBA (reference: 1 W into 4 Ω) pickup (semiconductor laser) Number of Channels: 2 channels (stereo)
Page 64 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Still having trouble?? USA ONLY Call 1-800-252-5722 http://www.jvc.com We can help you! EN, SP, FR 0106MNMMDWJEIN © 2006 Victor Company of Japan, Limited...
Page 65 • If you are not sure how to install this receiver correctly, have it installed by a revendeur d’autoradios JVC ou une compagnie d’approvisionnement. con su concesionario de JVC de equipos de audio para automóviles o a una qualified technician.
Page 66: Electrical Connections
• Remplacer le fusible par un de la valeur précisée. Si le fusible saute souvent, consult your JVC car audio dealer. quemase frecuentemente consulte con su concesionario de JVC de equipos consulter votre revendeur d’autoradios JVC. • It is recommended to connect to the speakers with maximum power of more de audio para automóviles.
Page 67 PRECAUTIONS on power supply and speaker PRECAUCIONES sobre las conexiones de la fuente de PRECAUTIONS sur l’alimentation et la connexion des connections: alimentación y de los altavoces: enceintes: • DO NOT connect the speaker leads of the power cord to the car •...
Page 68 Locate the back lamp lead in the Purple with white stripe Back lamp lead trunk. Conductor de la luz trasera KD-AVX2 Conductor de la luz trasera Localice el conductor de la luz Violet avec bande blanche Fil des feux de recul...
Page 69 JVC CD changer and DLP (Down Link Processor) / Cambiador de CD de JVC y DLP (“Down Link Processor”) JVC / Changeur de CD JVC et Processeur DLP (Processeur de signaux satellite-terre) JVC •...
Page 70: Localizacion De Averias
Apple iPod®/JVC D. player and JVC DLP (Down Link Processer)/Apple iPod®/Reproductor D. JVC y DLP (“Down Link Processor”) JVC /iPod® Apple/Lecteur D. JVC et Processeur DLP (Processeur de signaux satellite-terre) JVC • Set “External Input” to “Changer/iPod/D. Player” (see page 38 of the INSTRUCTIONS). / Ajuste “External Input” a “Changer/iPod/D. Player” (consulte la página 38 del MANUAL DE INSTRUCCIONES). / Réglez “External Input” sur “Changer/iPod/D.
Page 71 DVD/CD RECEIVER DVD-/CD RECEIVER RÉCEPTEUR DVD/CD DVD/CD-RECEIVER KD-AVX2 EXTRA MONITOR CONTROL MODE ASPECT MENU ASPECT DVD / RECEIVER CONTROL KD-AVX2 ZOOM MENU SOURCE –100 +100 BAND –10 DIRECT DISP DUAL ASPECT DISC+ TOP M MENU 2nd VOL ENTER 7 / BACK DISC–...
Page 72 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.
Page 73 WARNINGS: Cautions on the monitor: • DO NOT install any receiver in locations • The monitor built in this receiver has where; been produced with high precision, but – it may obstruct the steering wheel and it may have some ineffective dots. This is gearshift lever operations, as this may inevitable and is not malfunction.
Page 74 Introduction—Playable discs Discs you can play Discs cannot be played back You can play back the following discs—12 cm DVD-ROM (data), DVD-RAM, DVD-R/DVD- and 8 cm —on this receiver: RW recorded in the DVD-VR format, CD- • DVD Video: Recorded in PAL color system ROM, CD-I (CD-I Ready), Photo CD, etc.
Page 75: Rm-Rk240
Contents How to read this manual The following methods are used to make the Control panel ....... 6 explanations simple and easy-to-understand: Remote controller — ..7 RM-RK240 • Some related tips and notes are explained Getting started ......10 in “More about this receiver”...
Page 76: Control Panel
Control panel Parts identification Monitor indications Ex.: Source screen on JPEG playback ASPECT KD-AVX2 MENU DISP 7 / BACK BAND w • ENT (enter) button (standby/on attenuator) button • 3 (play) button 2 • +/– (volume +/–) button • SRC (source) button (control panel release) button •...
Page 77: Remote Controller
How to detach/attach the control panel Detaching... Attaching... How to change the control panel angle Angle 4 Angle 1 Angle 2 Angle 3 Caution: Do not insert your finger behind the control panel. Remote controller — RM-RK240 Installing the lithium coin battery Before using the remote controller: (CR2025) •...
Page 78 Warning: IMPORTANT: • Do not install any battery other than If Dual Zone is activated (see page 33), CR2025 or its equivalent; otherwise, it may the remote controller only functions for explode. operating the DVD/CD player. • Store the battery in a place where children cannot reach to avoid risk of accidents.
Page 79 • 5 / ∞ Controllable only if your monitor is one of the – Changes the preset channels. • 4 / ¢ JVC monitors — KV-MR9010 or KV-MH6510. – Changes the services if pressed briefly. Th ese buttons function as the number buttons –...
Page 80: Getting Started
Getting started Adjust the equalizer as you want. (See pages 42.) Basic operations To drop the volume in a moment (ATT) Turn on the power. To restore the sound, press it again. Ÿ To turn off the power DISP Canceling demonstration and setting You cannot select some sources if they the clock are not ready.
Page 81 • See the example on “Basic procedure of AV Finish the procedure. Menu operation” below to change the clock from 24 hours to 12 hours. Basic procedure of AV Menu operation You can adjust various settings of the unit from AV Menu. Ex.: To change the clock from 24 hours to 12 •...
Page 82: Radio Operations
When an FM stereo broadcast is hard to Radio operations receive MENU DISP TUNER (FM1/2/3,AM) 2 Select “Mode”, “Mono”, then “On”. Ÿ 7 / BACK BAND Selected band appears. 3 Finish the procedure. Lights up when receiving an FM stereo broadcast with sufficient Lights up when monaural mode is activated.
Page 83 To tune in strong-signal FM station only Storing stations in memory MENU You can preset six stations for each band. FM station automatic presetting — 2 Select “Mode”, “DX / Local”, then “Local”. SSM (Strong-station Sequential Memory) After selecting the FM band (FM1 – FM3) you want...
Page 84 Manual presetting Listening to a preset station After tuning in the station you want to preset... MENU DISP TUNER (FM1/2/3,AM) Select “List”, then a preset number (1–6) you want store the station into. 7 / BACK BAND EX.: Storing 92.5 MHz into preset number 4 of FM1 Select a preset number (1–6) you...
Page 85: Fm Rds Operations
FM RDS operations PTY codes News (News), Affairs (Current Affairs), Info (Information), Sport (Sport), Educate Searching for your favorite FM RDS (Education), Drama (Drama), Culture (Cultures), Science (Science), Varied programme (Varied Speech), Pop M (Pop Music), Rock M (Rock Music), Easy M (Easy You can tune in to a station broadcasting your Listening), Light M (Light Classics M), favorite programme by searching for a PTY code.
Page 86 Storing your favorite programmes Using the standby receptions You can store six favorite programme types. TA Standby Reception TA Standby Reception allows the receiver to switch temporarily to Traffic Announcement (TA) from any source other than AM. • The volume changes to the preset TA volume level (see page 40).
Page 87: Tracking The Same Programme
PTY Standby Reception Tracking the same programme— PTY Standby Reception allows the receiver Network-Tracking Reception to switch temporarily to your favorite PTY programme from any source other than AM. When driving in an area where FM reception • If the DAB tuner is connected, Standby is not sufficient enough, this receiver Reception also works to search for a DAB automatically tunes in to another FM...
Page 88: Disc Operations
The following marks are used to indicate Disc operations the playable discs... Playing a disc in the receiver Audio The disc type is automatically detected, and DVD Video DVD Audio Video CD with/without playback starts automatically (for DVD Video/ Audio: automatic start depends on its internal program).
Page 89 • When inserting a DVD video/DVD Audio • When inserting an MP3/WMA/WAV/JPEG/ disc: MPEG/DivX disc* Video/picture playback starts automatically After showing the total folder and file on the monitor when the parking brake is number... applied. Ex.: When an WAV file is detected •...
Page 90 Basic operations Operations Monitor indication and/or next operation To stop playback When you start playback again, playback starts from where it has been stopped 7 / BACK (Resume play). BAND To stop play temporarily Playback is paused. A still picture appears. DivX DivX MPEG...
Page 91 To go to the next or previous chapters/tracks To locate a particular title/group/ chapter/track directly • For DVD: During play or pause • For DVD Video/DVD Audio: During play or pause—select a chapter/ track. During stop—select a title/group. • For MP3/WMA/WAV/JPEG/MPEG: Select a track within the same folder.
Page 92 To locate a particular title/ To skip to the next or previous MPEG DivX MPEG DivX group/folder scene Audio You can skip the scene back and forward by 5 MPEG DivX JPEG MPEG DivX minutes. Ex.: when you are playing a 24-minute MPEG file and the elapsed playing time is 8’24”...
Page 93: Unique Disc Functions
Unique disc functions Selecting subtitles You can select the language of the subtitle to be shown on the monitor. Selecting audio languages • You can set the initial subtitle language DivX DivX using the AV Menu (see page 37). For DVD and DivX: You can select the language to listen to if the disc has multiple audio languages.
Page 94 Canceling the PBC playback Disc menu operations Menu-driven playback is possible while playing back a disc with menu-driven features or a VCD with the PBC (PlayBack Control). 2 Select a track to start normal playback using the number buttons (see page 9). While playing a DVD/DivX Audio To resume the PBC function...
Page 95: Disc Surround Playback
Selecting Browsable still pictures Playing back a bonus group While playing back a track linked to Some DVD Audio discs have a special browsable still pictures (B.S.P.), you can group called “bonus group” whose Audio Audio select (turn the page) the still picture to be contents are not open to the public.
Page 96 *1: Manufactured under license from Dolby *1 No sound comes out of the rear speakers Laboratories. Dolby, Pro Logic, MLP Lossless, and the subwoofer when the FRONT 2CH and the double-D symbol are the trademarks indicator appears on the monitor. of Dolby Laboratories.
Page 97: On-Screen Disc Operations
On-Screen disc operations Operations using the on-screen bar You can check the disc information and use some functions MPEG DivX MPEG JPEG DivX through the on-screen bar. Audio On-screen bar Information T02-C03 TOTAL 1:25:58 DVD -V C. RPT TIME TITLE CHAP Operation Disc type...
Page 98 To search for a particular point by playing Basic on-screen bar operations time 1 Select Display the on-screen bar. 2 Enter the elapsed playing time of the current title or of the disc. (twice) T02-C03 TOTAL 1:25:58 DVD -V C. RPT TIME TITLE CHAP...
Page 99 8 Track information (Not appears on JPEG/ Basic control screen operations MPEG playback) 9 Track (file) list You can search for and play the desired items p Current track (file) (highlighted bar) through the control screen when using the external monitor. To select a folder or MPEG DivX...
Page 100 While Dual Zone is on and the disc play stops... List screen operations Display the folder list. Each time you press the button, You can display the folder list/track list before the list screen comes on and starting play when using the external monitor goes off.
Page 101: Other Disc Operations
Repeat Other disc operations • For VCD: While PBC (see page 24) is not Selecting the playback modes in use. You can use only one of the following playback Mode Plays repeatedly modes at a time. Chapter* The current chapter. MENU •...
Page 102 List screen operations Other operations You can display the folder list/file list and select Monitor indication control a file directly while playing. To change monitor indication Audio MPEG DivX MPEG DivX JPEG While playing..DISP MPEG DivX JPEG MPEG DivX MENU (On the unit) •...
Page 103: Dual Zone Operations
Through the 2nd AUDIO OUT, 2 channel signal is emitted. When playing a multi- The surround effect is also added to the sound channel encoded disc, multi-channel signals from the speakers when you select “DISC” as are downmixed. the source. JVC original headphone virtual surround system.
Page 104: Av Menu Settings
AV Menu settings adjust the item selected. Basic procedure You can adjust various settings of this unit from the AV Menu. The AV Menu contains the menu items and submenus shown on the figure below. Repeat steps to adjust other MENU items if necessary.
Page 105 AV Menu items Indications Selectable settings, [reference page] Demonstration Oﬀ : Cancels. [Initial]; Activates the demonstration movie on the monitor. Wall Paper You can select the background picture of the monitor. Standard [Initial], Rose, Gold, Black, Metal, Metalic-Silver, Metalic-Green, Honeycomb-Red, Honeycomb-Green, Effect-Orange, Effect-Purple, Clown fish, Ocean, Sunset, Earth.
Page 106 Indications Selectable settings, [reference page] Aspect You can change the screen shape on the monitor according to the aspect ratio of the source. Choose the optimum one from the followings. Aspect ratio of incoming signal 16:9 Normal: For original shape of 4:3 Full: [Initial];...
Page 107 Indications Selectable settings, [reference page] Menu Language Select the initial disc menu language. Select the initial audio language. Audio Language Sub Title Select the initial subtitle language or erase the subtitle (OFF). OSD Language Select the language for some indications shown on the external monitor.
Page 108 Indications Selectable settings, [reference page] You can enjoy a powerful sound at low or middle volume D. (Dynamic) Range Compres. levels while playing a Dolby Digital software. (Compression)* • AUTO : Select this to apply the effect to multi-channel encoded software (excluding 1-channel and 2-channel software).
Page 109 Indications Selectable settings, [reference page] Speaker Level* You can adjust the output level of each speaker monitoring the test tone. Press and hold ENT to activate (or cancel) the test tone. • Front Lch/Center ch/Front Rch/Rear Rch/ Subwoofer* /Rear Lch: adjust the output level of each speaker in the range of –10dB –+10dB.
Page 110 Indications Selectable settings, [reference page] AF Regional When the received signals from the current station become (Alternative frequency/ weak... regionalization Oﬀ : Cancels. reception) AF Regional: Switches to another station broadcasting the same programme. • light up. [Initial]; Switches to another station (the programme may differ from the one currently received), [17].
Page 111 Changer/iPod/D. Player * External Input : [Initial] To use a JVC CD changer, iPod, JVC D. player, etc. [46, 54] External Input: To use any external component other than above. [53] You can deactivate the key-touch tone if you do not want it Beep to beep each time you press a button.
Page 112 Indications Selectable settings, [reference page] Flat/Hard Rock/R&B/Pop/ You can select a preset equalizer settings. Jazz/Dance/Country/ [Initial]; Flat Reggae/Classic/User You can adjust the sound modes and store your own 1/User 2/User 3 adjustments in User 1/2/3. 1 Select the frequency band to adjust— 60 Hz, 150 Hz, 400 Hz, 1kHz, 2.5kHz, 6.3kHz, 15kHz.
Page 113 Indications Selectable settings, [reference page] Volume Adjust Adjust and store the volume level of each source except FM. Once you have made an adjustment, it is memorized, and the volume level will automatically increase or decrease by adjusted level when you change the source. Adjust to match the input level to the FM sound level.
Page 114 Indications Selectable settings, [reference page] SSM* Search for FM stations and store them as preset stations automatically. [13] You can enter names for specific source name for AV Input Title Entry* and External Input, etc. [45] Oﬀ /Intro/Repeat/ You can select the playback mode of the disc in the unit and the discs in the CD changer [31, 47] Random* Reinforce the low level sound of DAB services.
Page 115: Other Main Functions
Assign a title. Other main functions 1 Select a character set. DISP Assigning titles to the sources You can assign titles to CDs (both in this receiver and in the CD changer), and change the 2 Select a character. source names of AV-INPUT and EXT-INPUT. Maximum number of Sources characters...
Page 116: Cd Changer Operations
CD changer operations Select a disc. MENU About the CD changer It is recommended to use the JVC MP3- compatible CD changer with your unit. Select “List”, then the disc you want to • Disc text information recorded in the CD play back.
Page 117 To go to the next or previous folders (only for Selectable modes MP3 discs) Deactivates Intro/Repeat/Random playback. Intro Mode Plays the first 15 seconds of Track: All tracks of the inserted discs. • lights up. Folder*: First tracks of all folders in the When using the remote controller..
Page 118: Dab Tuner Operations
Audio Broadcasting) tuner KT-DB1000 When an ensemble is received, searching with your receiver. If you have another stops. DAB tuner, consult your JVC IN-CAR To stop searching, press the same button ENTERTAINMENT dealer. again. • Refer also to the Instructions supplied for your DAB tuner.
Page 119 When surrounding sounds are noisy To search for your favorite service Some service provides Dynamic Range Control You can search for either Dynamic or Static (DRC) signals together with their regular PTY codes. programme signals. DRC will reinforce the low •...
Page 120 Storing DAB services in memory Tuning in to a preset DAB service When the source is DAB... You can preset six DAB services (primary) for each band. After tuning in the ensemble (primary service) 7 / BACK you want to preset... BAND MENU Select “List”, then a preset number...
Page 121 Select “Mode”, then “Announce Using the standby receptions Standby”. TA (Road Traffic News) Standby Reception • Operations are exactly the same as explained on page 16 for FM RDS stations. • You cannot activate TA Standby Reception separately for the DAB tuner and for FM Select an announcement type you tuner.
Page 122 To show the Dynamic Label Segment (DLS) Tracing the same programme— information Alternative Frequency Reception DISP You can keep listening to the same programme by activating the Alternative Frequency Reception. • While receiving a DAB service: When driving in an area where a DAB service cannot be received, this receiver automatically tunes in to another ensemble or FM RDS station, broadcasting the same programme.
Page 123: External Component Operations
Adjust the volume. External component operations Playing an external component You can connect an external component to LINE IN plug and VIDEO IN plug on the rear, Adjust the equalizer as you want. (See or to the CD changer jack on the rear using the pages 42.) KS-U57 Line Input Adapter (not supplied) or KS-U58 AUX Input Adapter (not supplied).
Page 124: Ipod®/D. Player Operations
Adjust the volume. This unit is ready for operating an Apple iPod or a JVC D. player from the control panel. • You can also use the equivalent buttons on the remote controller in the operations below.
Page 125 Select “Mode”, then your desired Selecting a track from the menu playback mode. Enter the main menu of the iPod or D. player. Now the 5/∞/ 4/¢ buttons Finish the procedure. work as the menu selecting buttons* Select the desired menu. Selectable modes For iPod: Deactivates Repeat/Random playback.
Page 126: Maintenance
To keep discs clean Maintenance A dirty disc may not play correctly. If a disc does become dirty, wipe it How to clean the connectors with a soft cloth in a straight line from center to edge. Frequent detachment will deteriorate the •...
Page 127: Language Codes
Language codes Code Language Code Language Code Language Afar Inupiak Kirundi Abkhazian Indonesian Rumanian Afrikaans Icelandic Kinyarwanda Ameharic Hebrew Sanskrit Arabic Yiddish Sindhi Assamese Javanese Sangho Aymara Georgian Serbo-Croatian Azerbaijani Kazakh Singhalese Bashkir Greenlandic Slovak Byelorussian Cambodian Slovenian Bulgarian Kannada Samoan Bihari Korean (KOR)
Page 128: More About This Receiver
More about this receiver Basic operations • If a DAB tuner is connected and Alternative Frequency Reception for DAB services Turning on the power (DAB AF) is activated, Network-Tracking • By pressing SRC on the receiver, you can also Reception (AF Regional) is also activated turn on the power.
Page 129 Playing a Recordable/Rewritable disc Playing an MP3/WMA/WAV disc • Use only “finalized” discs. • This receiver can play back MP3/WMA/WAV • This receiver can play back either MP3/ files with the extension code <.mp3>, <.wma> WMA/WAV files, JPEG files, or MPEG/DivX or <.wav>...
Page 130 • This receiver can play back the files recorded Playing an MPEG disc in VBR (variable bit rate). • This receiver can play back MPEG 1/2 files The files recorded in VBR have a discrepancy with the extension code <.mpg>. in elapsed time display, and do not show •...
Page 131 Road Traffic News Standby Reception for following JVC web site: DAB cannot be set separately. The T/P button For iPod users: <http://www.jvc.co.jp/ always work for the both Standby Reception english/car/support/ks-pd100/index.html> modes when the DAB tuner is connected. For D. player users: <http://www.jvc.co.jp/ english/car/support/ks-pd500/index.html>...
Page 132 On-screen guide icons During play, the following guide icons may appear for a while on the monitor. : Appears at the beginning of a scene containing multi-audio languages. : Appears at the beginning of a scene containing multi-subtitle languages. : Appears at the beginning of a scene containing multi-angle views. : Playback : Pause : Forward Slow Motion Playback...
Page 133: Troubleshooting
Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Remedies/Causes • Sound cannot be heard from the • Adjust the volume to the optimum level. speakers. • Check the cords and connections. Check the cords and connections.
Page 134 Symptoms Remedies/Causes • Sound and picture are sometimes • Stop playback while driving on rough roads. interrupted or distorted. • Check the cords and connections. • No playback picture appears on the Parking brake wire is not connected properly. See monitor.
Page 135 Symptoms Remedies/Causes • “No Disc” appears on the monitor. • Insert a disc into the magazine. • Insert disc correctly. • “No Magazine” appears on the Insert the magazine. monitor. • “Reset08” appears on the monitor. Connect this receiver and the CD changer correctly and press the reset button of the CD changer.
Page 136 Symptoms Remedies/Causes • The iPod or D. player does not turn • Check the connecting cable and its connection. on or does not work. • Update the firmware version of the D. player. • Charge the battery of the iPod/D. player. •...
Page 137: Specifications
Specifications [MW Tuner] AUDIO AMPLIFIER SECTION Sensitivity: 20 μV Maximum Power Output: Selectivity: 35 dB Front: 50 W per channel [LW Tuner] Rear: 50 W per channel Sensitivity: 50 μV Continuous Power Output (RMS): Front: 20 W per channel into 4 Ω, 40 Hz DVD/CD PLAYER SECTION to 20 000 Hz at no more than 0.8% total harmonic distortion.
Page 138 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Haben Sie PROBLEME mit dem Betrieb? Bitte setzen Sie Ihr Gerät zurück Siehe Seite Zurücksetzen des Geräts Vous avez des PROBLÈMES de fonctionnement? Réinitialisez votre appareil Référez-vous à...
Page 139 JVC ou une compagnie ihren JVC Autoradiohändler oder ein Unternehmen das op met uw JVC car audio dealer of een dealer of een bedrijf • If you are not sure how to install this receiver correctly, d’approvisionnement.
Page 140 Replace the fuse with one of the specified rating. If • Die Sicherung mit einer der entsprechenden Nennleistung • Vervang de zekering door een exemplaar met het the fuse blows frequently, consult your JVC IN-CAR Remarques: ersetzen. Brennt die Sicherung häufig durch, wenden Sie aangegeven vermogen.
Page 141 PRECAUTIONS on power supply and VORSICHTSMASSREGELN beim PRECAUTIONS sur l’alimentation et la VOORZORGSMAATREGELEN bij speaker connections: Anschließen der Stromversorgung und connexion des enceintes: hetverbinden van de stroomkabeldraad • DO NOT connect the speaker leads of the power Lautsprecher: • NE CONNECTEZ PAS les fils d’enceintes du cordon met de speakers: cord to the car battery;...
Page 142 Connecting the back camera lead / Anschließen der Rückfahrkamera / Connexion du fil de la caméra de recul / Verbinden van het draad van een achteruitkijkcamera Purple with white stripe (REVERSE GEAR SIGNAL) Back lamp lead Lila mit weißem Streifen Locate the back lamp lead in the KD-AVX2 Rückfahrleuchtenleitung Violet avec bande blanche trunk. Fil des feux de recul Paars met witte strepen REVERSE GEAR SIGNAL Suchen Sie die Rückfahrleuchtenleitung...
Page 143 OE REMOTE OE remote adapter (not supplied) If your car is equipped with the steering wheel remote controller, you can operate this receiver using the controller. To do it, a JVC’s Steering wheel remote input / Radio-Lenkrad-Fernbedienungsadaption (nicht im OE remote adapter (not supplied) which matches with your car is required.
Page 144 Cordon de signal fourni avec votre changeur de CD ou Tuner DAB JVC Aansluitsnoer bijgeleverd voor uw JVC CD-wisselaar of DAB-tuner Apple iPod®/JVC D. player and DAB tuner /Apple iPod®/JVC D. player und DAB-Tuner /iPod® Apple/Lecteur D. JVC et tuner DAB / Apple iPod®/JVC D. speler en DAB-tuner •...
Page 145 DVD/CD RECEIVER RECEPTOR CON DVD/CD RÉCEPTEUR DVD/CD KD-AVX2 EXTRA MONITOR CONTROL MODE ASPECT MENU ASPECT DVD / RECEIVER CONTROL KD-AVX2 ZOOM MENU SOURCE –100 +100 BAND –10 DIRECT DISP DUAL ASPECT DISC+ TOP M MENU 2nd VOL ENTER 7 / BACK DISC–...
Page 146 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.
Page 147 WARNINGS: Cautions on the monitor: • DO NOT install any receiver in locations • The monitor built in this receiver has where; been produced with high precision, but – it may obstruct the steering wheel and it may have some ineffective dots. This is gearshift lever operations, as this may inevitable and is not malfunction.
Page 148 Introduction—Playable discs Discs you can play Discs cannot be played back You can play back the following discs—12 cm DVD-ROM (data), DVD-RAM, DVD-R/DVD- and 8 cm —on this receiver: RW recorded in the DVD-VR format, CD- • DVD Video: Recorded in PAL color system ROM, CD-I (CD-I Ready), Photo CD, etc.
Page 149 Contents How to read this manual The following methods are used to make the Control panel ....... 6 explanations simple and easy-to-understand: Remote controller — ..7 RM-RK240 • Some related tips and notes are explained Getting started ......10 in “More about this receiver”...
Page 150: Control Panel
Control panel Parts identification Monitor indications Ex.: Source screen on JPEG playback ASPECT KD-AVX2 MENU DISP 7 / BACK BAND w • ENT (enter) button (standby/on attenuator) button • 3 (play) button 2 • +/– (volume +/–) button • SRC (source) button (control panel release) button •...
Page 151: Remote Controller
How to detach/attach the control panel Detaching... Attaching... How to change the control panel angle Angle 3 Angle 4 Angle 1 Angle 2 Caution: Do not insert your finger behind the control panel. Remote controller — RM-RK240 Installing the lithium coin battery Before using the remote controller: (CR2025) •...
Page 152 Warning: IMPORTANT: • Do not install any battery other than If Dual Zone is activated (see page 33), CR2025 or its equivalent; otherwise, it may the remote controller only functions for explode. operating the DVD/CD player. • Store the battery in a place where children cannot reach to avoid risk of accidents.
Page 153 • 5 / ∞ Controllable only if your monitor is one of the – Changes the preset channels. • 4 / ¢ JVC monitors — KV-MR9010 or KV-MH6510. – Changes the services if pressed briefly. Th ese buttons function as the number buttons –...
Page 154: Getting Started
Getting started Adjust the equalizer as you want. (See pages 42.) Basic operations To drop the volume in a moment (ATT) Turn on the power. To restore the sound, press it again. Ÿ To turn off the power DISP Canceling demonstration and setting You cannot select some sources if they the clock are not ready.
Page 155 • See the example on “Basic procedure of AV Finish the procedure. Menu operation” below to change the clock from 24 hours to 12 hours. Basic procedure of AV Menu operation You can adjust various settings of the unit from AV Menu. Ex.: To change the clock from 24 hours to 12 •...
Page 156: Radio Operations
When an FM stereo broadcast is hard to Radio operations receive MENU DISP TUNER (FM1/2/3,AM) 2 Select “Mode”, “Mono”, then “On”. Ÿ 7 / BACK BAND Selected band appears. 3 Finish the procedure. Lights up when receiving an FM stereo broadcast with sufficient Lights up when monaural mode is activated.
Page 157 To tune in strong-signal FM station only Storing stations in memory MENU You can preset six stations for each band. FM station automatic presetting — 2 Select “Mode”, “DX / Local”, then “Local”. SSM (Strong-station Sequential Memory) After selecting the FM band (FM1 – FM3) you want...
Page 158 Manual presetting Listening to a preset station After tuning in the station you want to preset... MENU DISP TUNER (FM1/2/3,AM) Select “List”, then a preset number (1–6) you want store the station into. 7 / BACK BAND EX.: Storing 92.5 MHz into preset number 4 of FM1 Select a preset number (1–6) you...
Page 159: Fm Rds Operations
FM RDS operations PTY codes News (News), Affairs (Current Affairs), Info (Information), Sport (Sport), Educate Searching for your favorite FM RDS (Education), Drama (Drama), Culture (Cultures), Science (Science), Varied programme (Varied Speech), Pop M (Pop Music), Rock M (Rock Music), Easy M (Easy You can tune in to a station broadcasting your Listening), Light M (Light Classics M), favorite programme by searching for a PTY code.
Page 160 Storing your favorite programmes Using the standby receptions You can store six favorite programme types. TA Standby Reception TA Standby Reception allows the receiver to switch temporarily to Traffic Announcement (TA) from any source other than AM. • The volume changes to the preset TA volume level (see page 40).
Page 161 PTY Standby Reception Tracking the same programme— PTY Standby Reception allows the receiver Network-Tracking Reception to switch temporarily to your favorite PTY programme from any source other than AM. When driving in an area where FM reception • If the DAB tuner is connected, Standby is not sufficient enough, this receiver Reception also works to search for a DAB automatically tunes in to another FM...
Page 162: Disc Operations
The following marks are used to indicate Disc operations the playable discs... Playing a disc in the receiver Audio The disc type is automatically detected, and DVD Video DVD Audio Video CD with/without playback starts automatically (for DVD Video/ Audio: automatic start depends on its internal program).
Page 163 • When inserting a DVD video/DVD Audio • When inserting an MP3/WMA/WAV/JPEG/ disc: MPEG/DivX disc* Video/picture playback starts automatically After showing the total folder and file on the monitor when the parking brake is number... applied. Ex.: When an WAV file is detected •...
Page 164 Basic operations Operations Monitor indication and/or next operation To stop playback When you start playback again, playback starts from where it has been stopped 7 / BACK (Resume play). BAND To stop play temporarily Playback is paused. A still picture appears. DivX DivX MPEG...
Page 165 To go to the next or previous chapters/tracks To locate a particular title/chapter/track directly • For DVD: During play or pause • For DVD Video/DVD Audio: During play or pause—select a chapter/ track. During stop—select a title/track. • For MP3/WMA/WAV/JPEG/MPEG: Select a track within the same folder.
Page 166 To locate a particular title/ To skip to the next or previous MPEG DivX MPEG DivX group/folder scene Audio You can skip the scene back and forward by 5 MPEG DivX JPEG MPEG DivX minutes. Ex.: when you are playing a 24-minute MPEG file and the elapsed playing time is 8’24”...
Page 167: Unique Disc Functions
Unique disc functions Selecting subtitles You can select the language of the subtitle to be shown on the monitor. Selecting audio languages • You can set the initial subtitle language DivX DivX using the AV Menu (see page 37). For DVD and DivX: You can select the language to listen to if the disc has multiple audio languages.
Page 168 Canceling the PBC playback Disc menu operations Menu-driven playback is possible while playing back a disc with menu-driven features or a VCD with the PBC (PlayBack Control). 2 Select a track to start normal playback using the number buttons (see page 9). While playing a DVD/DivX Audio To resume the PBC function...
Page 169: Disc Surround Playback
Selecting Browsable still pictures Playing back a bonus group While playing back a track linked to Some DVD Audio discs have a special browsable still pictures (B.S.P.), you can group called “bonus group” whose Audio Audio select (turn the page) the still picture to be contents are not open to the public.
Page 170 *1: Manufactured under license from Dolby *1 No sound comes out of the rear speakers Laboratories. Dolby, Pro Logic, MLP Lossless, and the subwoofer when the FRONT 2CH and the double-D symbol are the trademarks indicator appears on the monitor. of Dolby Laboratories.
Page 171: On-Screen Disc Operations
On-Screen disc operations Operations using the on-screen bar You can check the disc information and use some functions MPEG DivX MPEG JPEG DivX through the on-screen bar. Audio On-screen bar T02-C03 TOTAL 1:25:58 Information DVD -V C. RPT TIME TITLE CHAP Operation Disc type...
Page 172 To search for a particular point by playing Basic on-screen bar operations time 1 Select Display the on-screen bar. 2 Enter the elapsed playing time of the current title or of the disc. (twice) DVD -V T02-C03 TOTAL 1:25:58 C. RPT TIME TITLE CHAP...
Page 173 8 Track information (Not appears on JPEG/ Basic control screen operations MPEG/DivX playback) 9 Track (file) list You can search for and play the desired items p Current track (file) (highlighted bar) through the control screen when using the external monitor. To select a folder or MPEG DivX...
Page 174 While Dual Zone is on and the disc play stops... List screen operations Display the folder list. Each time you press the button, You can display the folder list/track list before the list screen comes on and starting play when using the external monitor goes off.
Page 175: Other Disc Operations
Repeat Other disc operations • For VCD: While PBC (see page 24) is not Selecting the playback modes in use. You can use only one of the following playback Mode Plays repeatedly modes at a time. Chapter* The current chapter. MENU •...
Page 176 List screen operations Other operations You can display the folder list/file list and select Monitor indication control a file directly while playing. To change monitor indication Audio MPEG DivX MPEG DivX JPEG While playing..DISP MPEG DivX JPEG MPEG DivX MENU (On the unit) •...
Page 177: Dual Zone Operations
Through the 2nd AUDIO OUT, 2 channel signal is emitted. When playing a multi- The surround effect is also added to the sound channel encoded disc, multi-channel signals from the speakers when you select “DISC” as are downmixed. the source. JVC original headphone virtual surround system.
Page 178: Av Menu Settings
AV Menu settings adjust the item selected. Basic procedure You can adjust various settings of this unit from the AV Menu. The AV Menu contains the menu items and submenus shown on the figure below. Repeat steps to adjust other MENU items if necessary.
Page 179 AV Menu items Indications Selectable settings, [reference page] Demonstration Oﬀ : Cancels. [Initial]; Activates the demonstration movie on the monitor. Wall Paper You can select the background picture of the monitor. Standard [Initial], Rose, Gold, Black, Metal, Metalic-Silver, Metalic-Green, Honeycomb-Red, Honeycomb-Green, Effect-Orange, Effect-Purple, Clown fish, Ocean, Sunset, Earth.
Page 180 Indications Selectable settings, [reference page] You can change the screen shape on the monitor according Aspect to the aspect ratio of the source. Choose the optimum one from the followings. Aspect ratio of incoming signal 16:9 Normal: For original shape of 4:3 Full: [Initial];...
Page 181 Indications Selectable settings, [reference page] Select the initial disc menu language. Menu Language Select the initial audio language. Audio Language Sub Title Select the initial subtitle language or erase the subtitle (OFF). OSD Language Select the language for some indications shown on the external monitor.
Page 182 Indications Selectable settings, [reference page] You can enjoy a powerful sound at low or middle volume D. (Dynamic) Range Compres. levels while playing a Dolby Digital software. (Compression)* • AUTO : Select this to apply the effect to multi-channel encoded software (excluding 1-channel and 2-channel software).
Page 183 Indications Selectable settings, [reference page] You can adjust the output level of each speaker monitoring Speaker Level* the test tone. Press and hold ENT to activate (or cancel) the test tone. • Front Lch/Center ch/Front Rch/Rear Rch/ Subwoofer* /Rear Lch: adjust the output level of each speaker in the range of –10dB –+10dB.
Page 184 Indications Selectable settings, [reference page] AF Regional When the received signals from the current station become (Alternative frequency/ weak... regionalization Oﬀ : Cancels. reception) AF Regional: Switches to another station broadcasting the same programme. • light up. [Initial]; Switches to another station (the programme may differ from the one currently received), [17].
Page 185 Changer/iPod/D. Player * External Input : [Initial] To use a JVC CD changer, iPod, JVC D. player, etc. [46, 54] External Input: To use any external component other than above. [53] You can deactivate the key-touch tone if you do not want it Beep to beep each time you press a button.
Page 186 Indications Selectable settings, [reference page] Flat/Hard Rock/R&B/Pop/ You can select a preset equalizer settings. Jazz/Dance/Country/ [Initial]; Flat Reggae/Classic/User You can adjust the sound modes and store your own 1/User 2/User 3 adjustments in User 1/2/3. 1 Select the frequency band to adjust— 60 Hz, 150 Hz, 400 Hz, 1kHz, 2.5kHz, 6.3kHz, 15kHz.
Page 187 Indications Selectable settings, [reference page] Adjust and store the volume level of each source except FM. Volume Adjust Once you have made an adjustment, it is memorized, and the volume level will automatically increase or decrease by adjusted level when you change the source. Adjust to match the input level to the FM sound level.
Page 188 Indications Selectable settings, [reference page] SSM* Search for FM stations and store them as preset stations automatically. [13] You can enter names for specific source name for AV Input Title Entry* and External Input, etc. [45] Oﬀ /Intro/Repeat/ You can select the playback mode of the disc in the unit and the Random* discs in the CD changer [31, 47] D.
Page 189: Other Main Functions
Assign a title. Other main functions 1 Select a character set. DISP Assigning titles to the sources You can assign titles to CDs (both in this receiver and in the CD changer), and change the 2 Select a character. source names of AV-INPUT and EXT-INPUT. Maximum number of Sources characters...
Page 190: Cd Changer Operations
CD changer operations Select a disc. MENU About the CD changer It is recommended to use the JVC MP3- compatible CD changer with your unit. Select “List”, then the disc you want to • Disc text information recorded in the CD play back.
Page 191 To go to the next or previous folders (only for Selectable modes MP3 discs) Deactivates Intro/Repeat/Random playback. Intro Mode Plays the first 15 seconds of Track: All tracks of the inserted discs. • lights up. Folder*: First tracks of all folders in the When using the remote controller..
Page 192: Dab Tuner Operations
Audio Broadcasting) tuner KT-DB1000 When an ensemble is received, searching with your receiver. If you have another stops. DAB tuner, consult your JVC IN-CAR To stop searching, press the same button ENTERTAINMENT dealer. again. • Refer also to the Instructions supplied for your DAB tuner.
Page 193 When surrounding sounds are noisy To search for your favorite service Some service provides Dynamic Range Control You can search for either Dynamic or Static (DRC) signals together with their regular PTY codes. programme signals. DRC will reinforce the low •...
Page 194 Storing DAB services in memory Tuning in to a preset DAB service When the source is DAB... You can preset six DAB services (primary) for each band. After tuning in the ensemble (primary service) 7 / BACK you want to preset... BAND MENU Select “List”, then a preset number...
Page 195 Select “Mode”, then “Announce Using the standby receptions Standby”. TA (Road Traffic News) Standby Reception • Operations are exactly the same as explained on page 16 for FM RDS stations. • You cannot activate TA Standby Reception separately for the DAB tuner and for FM Select an announcement type you tuner.
Page 196 To show the Dynamic Label Segment (DLS) Tracing the same programme— information Alternative Frequency Reception DISP You can keep listening to the same programme by activating the Alternative Frequency Reception. • While receiving a DAB service: When driving in an area where a DAB service cannot be received, this receiver automatically tunes in to another ensemble or FM RDS station, broadcasting the same programme.
Page 197: External Component Operations
Adjust the volume. External component operations Playing an external component You can connect an external component to LINE IN plug and VIDEO IN plug on the rear, Adjust the equalizer as you want. (See or to the CD changer jack on the rear using the pages 42.) KS-U57 Line Input Adapter (not supplied) or KS-U58 AUX Input Adapter (not supplied).
Page 198: Ipod®/D. Player Operations
Adjust the volume. This unit is ready for operating an Apple iPod or a JVC D. player from the control panel. • You can also use the equivalent buttons on the remote controller in the operations below.
Page 199 Select “Mode”, then your desired Selecting a track from the menu playback mode. Enter the main menu of the iPod or D. player. Now the 5/∞/ 4/¢ buttons Finish the procedure. work as the menu selecting buttons* Select the desired menu. Selectable modes For iPod: Deactivates Repeat/Random playback.
Page 200: Maintenance
To keep discs clean Maintenance A dirty disc may not play correctly. If a disc does become dirty, wipe it How to clean the connectors with a soft cloth in a straight line from center to edge. Frequent detachment will deteriorate the •...
Page 201: Language Codes
Language codes Code Language Code Language Code Language Afar Inupiak Kirundi Abkhazian Indonesian Rumanian Afrikaans Icelandic Kinyarwanda Ameharic Hebrew Sanskrit Arabic Yiddish Sindhi Assamese Javanese Sangho Aymara Georgian Serbo-Croatian Azerbaijani Kazakh Singhalese Bashkir Greenlandic Slovak Byelorussian Cambodian Slovenian Bulgarian Kannada Samoan Bihari Korean (KOR)
Page 202: More About This Receiver
More about this receiver Basic operations • If a DAB tuner is connected and Alternative Frequency Reception for DAB services Turning on the power (DAB AF) is activated, Network-Tracking • By pressing SRC on the receiver, you can also Reception (AF Regional) is also activated turn on the power.
Page 203 Playing a Recordable/Rewritable disc Playing an MP3/WMA/WAV disc • Use only “finalized” discs. • This receiver can play back MP3/WMA/WAV • This receiver can play back either MP3/ files with the extension code <.mp3>, <.wma> WMA/WAV files, JPEG files, or MPEG/DivX or <.wav>...
Page 204 • This receiver can play back the files recorded Playing an MPEG disc in VBR (variable bit rate). • This receiver can play back MPEG 1/2 files The files recorded in VBR have a discrepancy with the extension code <.mpg>. in elapsed time display, and do not show •...
Page 205 Road Traffic News Standby Reception for following JVC web site: DAB cannot be set separately. The T/P button For iPod users: <http://www.jvc.co.jp/ always work for the both Standby Reception english/car/support/ks-pd100/index.html> modes when the DAB tuner is connected. For D. player users: <http://www.jvc.co.jp/ english/car/support/ks-pd500/index.html>...
Page 206 On-screen guide icons During play, the following guide icons may appear for a while on the monitor. : Appears at the beginning of a scene containing multi-audio languages. : Appears at the beginning of a scene containing multi-subtitle languages. : Appears at the beginning of a scene containing multi-angle views. : Playback : Pause : Forward Slow Motion Playback...
Page 207: Troubleshooting
Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Remedies/Causes • Sound cannot be heard from the • Adjust the volume to the optimum level. speakers. • Check the cords and connections. Check the cords and connections.
Page 208 Symptoms Remedies/Causes • Sound and picture are sometimes • Stop playback while driving on rough roads. interrupted or distorted. • Check the cords and connections. • No playback picture appears on the Parking brake wire is not connected properly. See monitor.
Page 209 Symptoms Remedies/Causes • “No Disc” appears on the monitor. • Insert a disc into the magazine. • Insert disc correctly. • “No Magazine” appears on the Insert the magazine. monitor. • “Reset08” appears on the monitor. Connect this receiver and the CD changer correctly and press the reset button of the CD changer.
Page 210 Symptoms Remedies/Causes • The iPod or D. player does not turn • Check the connecting cable and its connection. on or does not work. • Update the firmware version of the D. player. • Charge the battery of the iPod/D. player. •...
Page 211: Specifications
Specifications [MW Tuner] AUDIO AMPLIFIER SECTION Sensitivity: 20 μV Maximum Power Output: Selectivity: 35 dB Front: 50 W per channel [LW Tuner] Rear: 50 W per channel Sensitivity: 50 μV Continuous Power Output (RMS): Front: 20 W per channel into 4 Ω, 40 Hz DVD/CD PLAYER SECTION to 20 000 Hz at no more than 0.8% total harmonic distortion.
Page 212 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit ¿Tiene PROBLEMAS con la operación? Por favor reinicialice su unidad Consulte la página de Cómo reposicionar su unidad Vous avez des PROBLÈMES de fonctionnement? Réinitialisez votre appareil Référez-vous à...
Page 213 KD-AVX2 Installation/Connection Manual Manual de instalación/conexión Manuel d’installation/raccordement 0206MNMMDWJEIN LVT1455-008A EN, SP, FR [EU] ©2006 Victor Company of Japan, Limited 12 V DC, NEGATIVE ground 12 V de CC, con courant electrical systems sistemas eléctricos de masa NEGATIVA continu de 12 V à masse NEGATIVE...
Page 214 × × × × × × ELECTRICAL CONNECTIONS CONEXIONES ELECTRICAS RACCORDEMENTS ELECTRIQUES Ω Ω Ω Ω...
Page 216 KD-AVX2 REVERSE GEAR SIGNAL AV1-IN KD-AVX2 AV2-INPUT External component...
Page 217 KD-AVX2 SUBWOOFER OUT JVC Amplifier KD-AVX2 JVC Amplifier LINE OUT (REAR) LINE OUT (FRONT) JVC Amplifier JVC Amplifier CENTER OUT...
Page 218 Antes de conectar los componentes externos, asegúrese de que la Before connecting the external components, make sure that the unidad esté apagada. receiver is turned off. JVC DAB tuner JVC DAB tuner JVC CD changer KD-AVX2 JVC CD changer KD-AVX2...
Page 219 DVD/CD RECEIVER ПРИЕМНИК ДЛЯ ВОСПРОИЗВЕДЕНИЯ ДИСКОВ DVD И КОМПАКТ-ДИСКОВ KD-AVX2 EXTRA MONITOR CONTROL MODE ASPECT MENU ASPECT DVD / RECEIVER CONTROL KD-AVX2 ZOOM MENU SOURCE –100 +100 BAND –10 DIRECT DISP DUAL ASPECT DISC+ TOP M MENU 2nd VOL ENTER 7 / BACK DISC–...
Page 220 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.
Page 221 WARNINGS: Cautions on the monitor: • DO NOT install any receiver in locations • The monitor built in this receiver has where; been produced with high precision, but – it may obstruct the steering wheel and it may have some ineffective dots. This is gearshift lever operations, as this may inevitable and is not malfunction.
Page 222 Introduction—Playable discs Discs you can play Discs cannot be played back You can play back the following discs—12 cm DVD-ROM (data), DVD-RAM, DVD-R/DVD- and 8 cm —on this receiver: RW recorded in the DVD-VR format, CD- • DVD Video: Recorded in PAL color system ROM, CD-I (CD-I Ready), Photo CD, etc.
Page 223: Rm-Rk240
Contents How to read this manual The following methods are used to make the Control panel ....... 6 explanations simple and easy-to-understand: Remote controller — ..7 RM-RK240 • Some related tips and notes are explained Getting started ......10 in “More about this receiver”...
Page 224: Control Panel
Control panel Parts identification Monitor indications Ex.: Source screen on JPEG playback ASPECT KD-AVX2 MENU DISP 7 / BACK BAND w • ENT (enter) button (standby/on attenuator) button • 3 (play) button 2 • +/– (volume +/–) button • SRC (source) button (control panel release) button •...
Page 225: Remote Controller
How to detach/attach the control panel Detaching... Attaching... How to change the control panel angle Angle 3 Angle 4 Angle 1 Angle 2 Caution: Do not insert your finger behind the control panel. Remote controller — RM-RK240 Installing the lithium coin battery Before using the remote controller: (CR2025) •...
Page 226 Warning: IMPORTANT: • Do not install any battery other than If Dual Zone is activated (see page 33), CR2025 or its equivalent; otherwise, it may the remote controller only functions for explode. operating the DVD/CD player. • Store the battery in a place where children cannot reach to avoid risk of accidents.
Page 227 • 5 / ∞ Controllable only if your monitor is one of the – Changes the preset channels. • 4 / ¢ JVC monitors — KV-MR9010 or KV-MH6510. – Changes the services if pressed briefly. Th ese buttons function as the number buttons –...
Page 228: Getting Started
Getting started Adjust the equalizer as you want. (See pages 42.) Basic operations To drop the volume in a moment (ATT) Turn on the power. To restore the sound, press it again. Ÿ To turn off the power DISP Canceling demonstration and setting You cannot select some sources if they the clock are not ready.
Page 229 • See the example on “Basic procedure of AV Finish the procedure. Menu operation” below to change the clock from 24 hours to 12 hours. Basic procedure of AV Menu operation You can adjust various settings of the unit from AV Menu. Ex.: To change the clock from 24 hours to 12 •...
Page 230: Radio Operations
When an FM stereo broadcast is hard to Radio operations receive MENU DISP TUNER (FM1/2/3,AM) 2 Select “Mode”, “Mono”, then “On”. Ÿ 7 / BACK BAND Selected band appears. 3 Finish the procedure. Lights up when receiving an FM stereo broadcast with sufficient Lights up when monaural mode is activated.
Page 231 To tune in strong-signal FM station only Storing stations in memory MENU You can preset six stations for each band. FM station automatic presetting — 2 Select “Mode”, “DX / Local”, then “Local”. SSM (Strong-station Sequential Memory) After selecting the FM band (FM1 – FM3) you want...
Page 232 Manual presetting Listening to a preset station After tuning in the station you want to preset... MENU DISP TUNER (FM1/2/3,AM) Select “List”, then a preset number (1–6) you want store the station into. 7 / BACK BAND EX.: Storing 92.5 MHz into preset number 4 of FM1 Select a preset number (1–6) you...
Page 233: Fm Rds Operations
FM RDS operations PTY codes News (News), Affairs (Current Affairs), Info (Information), Sport (Sport), Educate Searching for your favorite FM RDS (Education), Drama (Drama), Culture (Cultures), Science (Science), Varied programme (Varied Speech), Pop M (Pop Music), Rock M (Rock Music), Easy M (Easy You can tune in to a station broadcasting your Listening), Light M (Light Classics M), favorite programme by searching for a PTY code.
Page 234 Storing your favorite programmes Using the standby receptions You can store six favorite programme types. TA Standby Reception TA Standby Reception allows the receiver to switch temporarily to Traffic Announcement (TA) from any source other than AM. • The volume changes to the preset TA volume level (see page 40).
Page 235 PTY Standby Reception Tracking the same programme— PTY Standby Reception allows the receiver Network-Tracking Reception to switch temporarily to your favorite PTY programme from any source other than AM. When driving in an area where FM reception • If the DAB tuner is connected, Standby is not sufficient enough, this receiver Reception also works to search for a DAB automatically tunes in to another FM...
Page 236: Disc Operations
The following marks are used to indicate Disc operations the playable discs... Playing a disc in the receiver Audio The disc type is automatically detected, and DVD Video DVD Audio Video CD with/without playback starts automatically (for DVD Video/ Audio: automatic start depends on its internal program).
Page 237 • When inserting a DVD video/DVD Audio • When inserting an MP3/WMA/WAV/JPEG/ disc: MPEG/DivX disc* Video/picture playback starts automatically After showing the total folder and file on the monitor when the parking brake is number... applied. Ex.: When an WAV file is detected •...
Page 238 Basic operations Operations Monitor indication and/or next operation To stop playback When you start playback again, playback starts from where it has been stopped 7 / BACK (Resume play). BAND To stop play temporarily Playback is paused. A still picture appears. DivX DivX MPEG...
Page 239 To go to the next or previous chapters/tracks To locate a particular title/chapter/track directly • For DVD: During play or pause • For DVD Video/DVD Audio: During play or pause—select a chapter/ track. During stop—select a title/track. • For MP3/WMA/WAV/JPEG/MPEG: Select a track within the same folder.
Page 240 To locate a particular title/ To skip to the next or previous MPEG DivX MPEG DivX group/folder scene Audio You can skip the scene back and forward by 5 MPEG DivX JPEG MPEG DivX minutes. Ex.: when you are playing a 24-minute MPEG file and the elapsed playing time is 8’24”...
Page 241: Unique Disc Functions
Unique disc functions Selecting subtitles You can select the language of the subtitle to be shown on the monitor. Selecting audio languages • You can set the initial subtitle language DivX DivX using the AV Menu (see page 37). For DVD and DivX: You can select the language to listen to if the disc has multiple audio languages.
Page 242 Canceling the PBC playback Disc menu operations Menu-driven playback is possible while playing back a disc with menu-driven features or a VCD with the PBC (PlayBack Control). 2 Select a track to start normal playback using the number buttons (see page 9). While playing a DVD/DivX Audio To resume the PBC function...
Page 243: Disc Surround Playback
Selecting Browsable still pictures Playing back a bonus group While playing back a track linked to Some DVD Audio discs have a special browsable still pictures (B.S.P.), you can group called “bonus group” whose Audio Audio select (turn the page) the still picture to be contents are not open to the public.
Page 244 *1: Manufactured under license from Dolby *1 No sound comes out of the rear speakers Laboratories. Dolby, Pro Logic, MLP Lossless, and the subwoofer when the FRONT 2CH and the double-D symbol are the trademarks indicator appears on the monitor. of Dolby Laboratories.
Page 245: On-Screen Disc Operations
On-Screen disc operations Operations using the on-screen bar You can check the disc information and use some functions MPEG DivX MPEG JPEG DivX through the on-screen bar. Audio On-screen bar T02-C03 TOTAL 1:25:58 Information DVD -V C. RPT TIME TITLE CHAP Operation Disc type...
Page 246 To search for a particular point by playing Basic on-screen bar operations time 1 Select Display the on-screen bar. 2 Enter the elapsed playing time of the current title or of the disc. (twice) DVD -V T02-C03 TOTAL 1:25:58 C. RPT TIME TITLE CHAP...
Page 247 8 Track information (Not appears on JPEG/ Basic control screen operations MPEG/DivX playback) 9 Track (file) list You can search for and play the desired items p Current track (file) (highlighted bar) through the control screen when using the external monitor. To select a folder or MPEG DivX...
Page 248 While Dual Zone is on and the disc play stops... List screen operations Display the folder list. Each time you press the button, You can display the folder list/track list before the list screen comes on and starting play when using the external monitor goes off.
Page 249: Other Disc Operations
Repeat Other disc operations • For VCD: While PBC (see page 24) is not Selecting the playback modes in use. You can use only one of the following playback Mode Plays repeatedly modes at a time. Chapter* The current chapter. MENU •...
Page 250 List screen operations Other operations You can display the folder list/file list and select Monitor indication control a file directly while playing. To change monitor indication Audio MPEG DivX MPEG DivX JPEG While playing..DISP MPEG DivX JPEG MPEG DivX MENU (On the unit) •...
Page 251: Dual Zone Operations
Through the 2nd AUDIO OUT, 2 channel signal is emitted. When playing a multi- The surround effect is also added to the sound channel encoded disc, multi-channel signals from the speakers when you select “DISC” as are downmixed. the source. JVC original headphone virtual surround system.
Page 252: Av Menu Settings
AV Menu settings adjust the item selected. Basic procedure You can adjust various settings of this unit from the AV Menu. The AV Menu contains the menu items and submenus shown on the figure below. Repeat steps to adjust other MENU items if necessary.
Page 253 AV Menu items Indications Selectable settings, [reference page] Demonstration Oﬀ : Cancels. [Initial]; Activates the demonstration movie on the monitor. Wall Paper You can select the background picture of the monitor. Standard [Initial], Rose, Gold, Black, Metal, Metalic-Silver, Metalic-Green, Honeycomb-Red, Honeycomb-Green, Effect-Orange, Effect-Purple, Clown fish, Ocean, Sunset, Earth.
Page 254 Indications Selectable settings, [reference page] You can change the screen shape on the monitor according Aspect to the aspect ratio of the source. Choose the optimum one from the followings. Aspect ratio of incoming signal 16:9 Normal: For original shape of 4:3 Full: [Initial];...
Page 255 Indications Selectable settings, [reference page] Select the initial disc menu language. Menu Language Select the initial audio language. Audio Language Sub Title Select the initial subtitle language or erase the subtitle (OFF). OSD Language Select the language for some indications shown on the external monitor.
Page 256 Indications Selectable settings, [reference page] You can enjoy a powerful sound at low or middle volume D. (Dynamic) Range Compres. levels while playing a Dolby Digital software. (Compression)* • AUTO : Select this to apply the effect to multi-channel encoded software (excluding 1-channel and 2-channel software).
Page 257 Indications Selectable settings, [reference page] You can adjust the output level of each speaker monitoring Speaker Level* the test tone. Press and hold ENT to activate (or cancel) the test tone. • Front Lch/Center ch/Front Rch/Rear Rch/ Subwoofer* /Rear Lch: adjust the output level of each speaker in the range of –10dB –+10dB.
Page 258 Indications Selectable settings, [reference page] AF Regional When the received signals from the current station become (Alternative frequency/ weak... regionalization Oﬀ : Cancels. reception) AF Regional: Switches to another station broadcasting the same programme. • light up. [Initial]; Switches to another station (the programme may differ from the one currently received), [17].
Page 259 Changer/iPod/D. Player * External Input : [Initial] To use a JVC CD changer, iPod, JVC D. player, etc. [46, 54] External Input: To use any external component other than above. [53] You can deactivate the key-touch tone if you do not want it Beep to beep each time you press a button.
Page 260 Indications Selectable settings, [reference page] Flat/Hard Rock/R&B/Pop/ You can select a preset equalizer settings. Jazz/Dance/Country/ [Initial]; Flat Reggae/Classic/User You can adjust the sound modes and store your own 1/User 2/User 3 adjustments in User 1/2/3. 1 Select the frequency band to adjust— 60 Hz, 150 Hz, 400 Hz, 1kHz, 2.5kHz, 6.3kHz, 15kHz.
Page 261 Indications Selectable settings, [reference page] Adjust and store the volume level of each source except FM. Volume Adjust Once you have made an adjustment, it is memorized, and the volume level will automatically increase or decrease by adjusted level when you change the source. Adjust to match the input level to the FM sound level.
Page 262 Indications Selectable settings, [reference page] SSM* Search for FM stations and store them as preset stations automatically. [13] You can enter names for specific source name for AV Input Title Entry* and External Input, etc. [45] Oﬀ /Intro/Repeat/ You can select the playback mode of the disc in the unit and the Random* discs in the CD changer [31, 47] D.
Page 263: Other Main Functions
Assign a title. Other main functions 1 Select a character set. DISP Assigning titles to the sources You can assign titles to CDs (both in this receiver and in the CD changer), and change the 2 Select a character. source names of AV-INPUT and EXT-INPUT. Maximum number of Sources characters...
Page 264: Cd Changer Operations
CD changer operations Select a disc. MENU About the CD changer It is recommended to use the JVC MP3- compatible CD changer with your unit. Select “List”, then the disc you want to • Disc text information recorded in the CD play back.
Page 265 To go to the next or previous folders (only for Selectable modes MP3 discs) Deactivates Intro/Repeat/Random playback. Intro Mode Plays the first 15 seconds of Track: All tracks of the inserted discs. • lights up. Folder*: First tracks of all folders in the When using the remote controller..
Page 266: Dab Tuner Operations
Audio Broadcasting) tuner KT-DB1000 When an ensemble is received, searching with your receiver. If you have another stops. DAB tuner, consult your JVC IN-CAR To stop searching, press the same button ENTERTAINMENT dealer. again. • Refer also to the Instructions supplied for your DAB tuner.
Page 267 When surrounding sounds are noisy To search for your favorite service Some service provides Dynamic Range Control You can search for either Dynamic or Static (DRC) signals together with their regular PTY codes. programme signals. DRC will reinforce the low •...
Page 268 Storing DAB services in memory Tuning in to a preset DAB service When the source is DAB... You can preset six DAB services (primary) for each band. After tuning in the ensemble (primary service) 7 / BACK you want to preset... BAND MENU Select “List”, then a preset number...
Page 269 Select “Mode”, then “Announce Using the standby receptions Standby”. TA (Road Traffic News) Standby Reception • Operations are exactly the same as explained on page 16 for FM RDS stations. • You cannot activate TA Standby Reception separately for the DAB tuner and for FM Select an announcement type you tuner.
Page 270 To show the Dynamic Label Segment (DLS) Tracing the same programme— information Alternative Frequency Reception DISP You can keep listening to the same programme by activating the Alternative Frequency Reception. • While receiving a DAB service: When driving in an area where a DAB service cannot be received, this receiver automatically tunes in to another ensemble or FM RDS station, broadcasting the same programme.
Page 271: External Component Operations
Adjust the volume. External component operations Playing an external component You can connect an external component to LINE IN plug and VIDEO IN plug on the rear, Adjust the equalizer as you want. (See or to the CD changer jack on the rear using the pages 42.) KS-U57 Line Input Adapter (not supplied) or KS-U58 AUX Input Adapter (not supplied).
Page 272: Ipod®/D. Player Operations
Adjust the volume. This unit is ready for operating an Apple iPod or a JVC D. player from the control panel. • You can also use the equivalent buttons on the remote controller in the operations below.
Page 273 Select “Mode”, then your desired Selecting a track from the menu playback mode. Enter the main menu of the iPod or D. player. Now the 5/∞/ 4/¢ buttons Finish the procedure. work as the menu selecting buttons* Select the desired menu. Selectable modes For iPod: Deactivates Repeat/Random playback.
Page 274: Maintenance
To keep discs clean Maintenance A dirty disc may not play correctly. If a disc does become dirty, wipe it How to clean the connectors with a soft cloth in a straight line from center to edge. Frequent detachment will deteriorate the •...
Page 275: Language Codes
Language codes Code Language Code Language Code Language Afar Inupiak Kirundi Abkhazian Indonesian Rumanian Afrikaans Icelandic Kinyarwanda Ameharic Hebrew Sanskrit Arabic Yiddish Sindhi Assamese Javanese Sangho Aymara Georgian Serbo-Croatian Azerbaijani Kazakh Singhalese Bashkir Greenlandic Slovak Byelorussian Cambodian Slovenian Bulgarian Kannada Samoan Bihari Korean (KOR)
Page 276: More About This Receiver
More about this receiver Basic operations • If a DAB tuner is connected and Alternative Frequency Reception for DAB services Turning on the power (DAB AF) is activated, Network-Tracking • By pressing SRC on the receiver, you can also Reception (AF Regional) is also activated turn on the power.
Page 277 Playing a Recordable/Rewritable disc Playing an MP3/WMA/WAV disc • Use only “finalized” discs. • This receiver can play back MP3/WMA/WAV • This receiver can play back either MP3/ files with the extension code <.mp3>, <.wma> WMA/WAV files, JPEG files, or MPEG/DivX or <.wav>...
Page 278 • This receiver can play back the files recorded Playing an MPEG disc in VBR (variable bit rate). • This receiver can play back MPEG 1/2 files The files recorded in VBR have a discrepancy with the extension code <.mpg>. in elapsed time display, and do not show •...
Page 279 Road Traffic News Standby Reception for following JVC web site: DAB cannot be set separately. The T/P button For iPod users: <http://www.jvc.co.jp/ always work for the both Standby Reception english/car/support/ks-pd100/index.html> modes when the DAB tuner is connected. For D. player users: <http://www.jvc.co.jp/ english/car/support/ks-pd500/index.html>...
Page 280 On-screen guide icons During play, the following guide icons may appear for a while on the monitor. : Appears at the beginning of a scene containing multi-audio languages. : Appears at the beginning of a scene containing multi-subtitle languages. : Appears at the beginning of a scene containing multi-angle views. : Playback : Pause : Forward Slow Motion Playback...
Page 281: Troubleshooting
Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Remedies/Causes • Sound cannot be heard from the • Adjust the volume to the optimum level. speakers. • Check the cords and connections. Check the cords and connections.
Page 282 Symptoms Remedies/Causes • Sound and picture are sometimes • Stop playback while driving on rough roads. interrupted or distorted. • Check the cords and connections. • No playback picture appears on the Parking brake wire is not connected properly. See monitor.
Page 283 Symptoms Remedies/Causes • “No Disc” appears on the monitor. • Insert a disc into the magazine. • Insert disc correctly. • “No Magazine” appears on the Insert the magazine. monitor. • “Reset08” appears on the monitor. Connect this receiver and the CD changer correctly and press the reset button of the CD changer.
Page 284 Symptoms Remedies/Causes • The iPod or D. player does not turn • Check the connecting cable and its connection. on or does not work. • Update the firmware version of the D. player. • Charge the battery of the iPod/D. player. •...
Page 285: Specifications
Specifications [MW Tuner] AUDIO AMPLIFIER SECTION Sensitivity: 20 μV Maximum Power Output: Selectivity: 35 dB Front: 50 W per channel [LW Tuner] Rear: 50 W per channel Sensitivity: 50 μV Continuous Power Output (RMS): Front: 20 W per channel into 4 Ω, 40 Hz DVD/CD PLAYER SECTION to 20 000 Hz at no more than 0.8% total harmonic distortion.
Page 286 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Затруднения при эксплуатации? Пожалуйста, перезагрузите Ваше устройство Для получения информации о перезагрузке Вашего устройства обратитесь на соответствующую страницу EN, RU © 2006 Victor Company of Japan, Limited 0206MNMMDWJEIN...
Page 287 KD-AVX2 Installation/Connection Manual Руководство по установке/подключению 0206MNMMDWJEIN LVT1455-010A EN, RU [EE] ©2006 Victor Company of Japan, Limited WARNINGS ПРЕДУПРЕЖДЕНИЯ • • • • • • × × INSTALLATION (IN-DASH MOUNTING) УСТАНОВКА (УСТАНОВКА В ПРИБОРНУЮ ПАНЕЛЬ) • • • 3 mm 6 mm •...
Page 288 × × × × ELECTRICAL CONNECTIONS ЭЛЕКТРИЧЕСКИЕ ПОДКЛЮЧЕНИЯ • • • 4 Ω 8 Ω • •...
Page 289 Обрежьте разъем ISO. Подсоедините цветные провода шнура питания в указанном ниже порядке. Подключите кабель антенны. В последнюю очередь подключите электропроводку к устройству.
Page 290 KD-AVX2 REVERSE GEAR SIGNAL AV1-IN KD-AVX2 AV2-INPUT External component...
Page 291 KD-AVX2 • • SUBWOOFER OUT KD-AVX2 JVC Amplifier JVC Amplifier LINE OUT (REAR) LINE OUT (FRONT) JVC Amplifier JVC Amplifier CENTER OUT...
Page 292 Before connecting the external components, make sure that the receiver is turned off. JVC DAB tuner JVC CD changer KD-AVX2 JVC DAB tuner JVC CD changer KD-AVX2 JVC DAB tuner KD-AVX2 KD-AVX2 External component KD-AVX2...
Page 293 DVD/CD RECEIVER KD-AVX2 KD-AVX2 KD-AVX2 EXTRA MONITOR CONTROL MODE ASPECT MENU DVD / RECEIVER CONTROL ASPECT KD-AVX2 ZOOM MENU SOURCE –100 +100 BAND –10 DIRECT DISP DUAL ASPECT DISC+ TOP M MENU 2nd VOL ENTER 7 / BACK DISC– SETUP...
Page 294 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.
Page 295 WARNINGS: Caution on volume setting: • DO NOT install any receiver in locations Discs produce very little noise compared where; with other sources. Lower the volume – it may obstruct the steering wheel and before playing a disc to avoid damaging gearshift lever operations, as this may the speakers by the sudden increase of the result in a traffic accident.
Page 296 Introduction—Playable discs Discs you can play Discs cannot be played back You can play back the following discs—12 cm DVD-ROM (data), DVD-RAM, DVD-R/DVD- and 8 cm—on this receiver: RW recorded in the DVD-VR format, CD- • DVD Video: Recorded in NTSC or PAL color ROM, CD-I (CD-I Ready), Photo CD, etc.
Page 297 Contents How to read this manual The following methods are used to make the Control panel ....... 6 explanations simple and easy-to-understand: Remote controller — ..7 RM-RK240 • Some related tips and notes are explained Getting started ......10 in “More about this receiver”...
Page 298: Control Panel
Control panel Parts identification Monitor indications Ex.: Source screen on JPEG playback ASPECT KD-AVX2 MENU DISP 7 / BACK BAND Monitor indications (standby/on attenuator) button 2 • +/– (volume +/–) button r Source indicator • SRC (source) button t Main display •...
Page 299: Remote Controller
How to detach/attach the control panel Detaching... Attaching... How to change the control panel angle Angle 3 Angle 4 Angle 1 Angle 2 Caution: Do not insert your finger behind the control panel. Remote controller — RM-RK240 Installing the lithium coin battery Before using the remote controller: (CR2025) •...
Page 300 Warning: IMPORTANT: • Do not install any battery other than If Dual Zone is activated (see page 30), CR2025 or its equivalent; otherwise, it may the remote controller only functions for explode. operating the DVD/CD player. • Store the battery in a place where children cannot reach to avoid risk of accidents.
Page 301 • 5 / ∞ Controllable only if your monitor is one of the ∞: Pauses/stops or resumes playback. JVC monitors — KV-MR9010 or 5: Enters the main menu of iPod/D. KV-MH6510. player. (Now 5 / ∞/4 / ¢ work as Th ese buttons function as the number buttons when pressed with SHIFT button.
Page 302: Getting Started
To drop the volume in a moment (ATT) Getting started To restore the sound, press it again. Basic operations Turn on the power. To turn off the power Ÿ DISP Canceling demonstration and setting the clock MENU You cannot select some sources if they are not ready.
Page 303 • See the example on “Basic procedure of AV Finish the procedure. Menu operation” below to change the clock from 12 hours to 24 hours. Basic procedure of AV Menu operation You can adjust various settings of the unit from AV Menu. Ex.: To change the clock from 12 hours to 24 •...
Page 304: Radio Operations
When an FM stereo broadcast is hard to Radio operations receive MENU DISP TUNER (FM1/2/3,AM) 2 Select “Mode”, “Mono”, then “On”. Ÿ 7 / BACK BAND Selected band appears. 3 Finish the procedure. Lights up when receiving an FM stereo broadcast with sufficient Lights up when monaural mode is activated.
Page 305 3 Finish the procedure. Manual presetting After tuning in the station you want to preset... MENU Lights up when “Local” mode is activated. Select “List”, then a preset number Only stations with sufficient signal strength (1–6) you want to store the station will be detected.
Page 306 • You can change the preset list between Listening to a preset station FM1/2/3 by pressing and holding 5/∞ buttons (or by pressing 5/∞ buttons repeatedly) when selecting any of the FM bands. DISP TUNER (FM1/2/3,AM) 7 / BACK BAND When using the remote controller...
Page 307: Disc Operations
The following marks are used to indicate Disc operations the playable discs... Playing a disc in the receiver Audio The disc type is automatically detected, and DVD Video DVD Audio Video CD with/without playback starts automatically (for DVD Video/ Audio: automatic start depends on its internal JPEG program).
Page 308 • When inserting a DVD video/DVD Audio • When inserting an MP3/WMA/WAV/JPEG/ disc: MPEG disc* Video/picture playback starts automatically After showing the total folder and file on the monitor when the parking brake is number... applied. Ex.: When an WAV file is detected •...
Page 309 Basic operations Operations Monitor indication and/or next operation To stop playback When you start playback again, playback starts from where it has been stopped 7 / BACK (Resume play). BAND To stop play temporarily Playback is paused. A still picture appears. A Frame by frame playback MPEG MPEG...
Page 310 To go to the next or previous chapters/tracks To locate a particular title/chapter/track directly • For DVD: During play or pause • For DVD Video/DVD Audio: During play or pause—select a chapter/ track. During stop—select a title/track. • For MP3/WMA/WAV/JPEG/MPEG: Select a track within the same folder.
Page 311 To locate a particular title/ To skip to the next or previous scene MPEG MPEG group/folder Audio You can skip the scene back and forward by 5 minutes. MPEG MPEG JPEG Ex.: when you are playing a 24-minute MPEG file and the elapsed playing time is 8’24”... Within 10 seconds, press the number buttons (see page 9).
Page 312: Unique Disc Functions
Unique disc functions Selecting subtitles You can select the language of the subtitle to be shown on the monitor. Selecting audio languages • You can set the initial subtitle language using the AV Menu (see page 34). For DVD: You can select the language to listen to if the disc has multiple audio languages.
Page 313 Canceling the PBC playback Disc menu operations Menu-driven playback is possible while playing back a DVD with menu-driven features or a VCD with the PBC (PlayBack Control). 2 Select a track to start normal playback using the number buttons (see page 9). While playing a DVD Audio To resume the PBC function...
Page 314: Disc Surround Playback
Playing back a bonus group Selecting Browsable still pictures Some DVD Audio discs have a special While playing back a track linked to group called “bonus group” whose browsable still pictures (B.S.P.), you can Audio Audio contents are not open to the public. select (turn the page) the still picture to be •...
Page 315 *1: Manufactured under license from Dolby *1 No sound comes out of the rear speakers Laboratories. Dolby, Pro Logic, MLP Lossless, and the subwoofer when the FRONT 2CH and the double-D symbol are the trademarks indicator appears on the monitor. of Dolby Laboratories.
Page 316: On-Screen Disc Operations
On-Screen disc operations Operations using the on-screen bar You can check the disc information and use some functions through MPEG JPEG MPEG the on-screen bar. Audio On-screen bar T02-C03 TOTAL 1:25:58 Information DVD -V C. RPT TIME TITLE CHAP Operation Disc type Remaining time of the current •...
Page 317 To search for a particular point by playing Basic on-screen bar operations time 1 Select Display the on-screen bar. 2 Enter the elapsed playing time of the current title or of the disc. (twice) DVD -V T02-C03 TOTAL 1:25:58 C. RPT TIME TITLE CHAP...
Page 318 8 Track information (Not appears on JPEG/ Basic control screen operations MPEG playback) 9 Track (file) list You can search for and play the desired items p Current track (file) (highlighted bar) through the control screen when using the external monitor. To select a folder or track MPEG JPEG...
Page 319 While Dual Zone is on and the disc play stops... List screen operations Display the folder list. Each time you press the button, You can display the folder list/track list before the list screen comes on and starting play when using the external monitor goes off.
Page 320: Other Disc Operations
Repeat Other disc operations • For VCD: While PBC (see page 21) is not Selecting the playback modes in use. You can use only one of the following playback modes at a time. Mode Plays repeatedly Chapter* The current chapter. MENU •...
Page 321 List screen operations Other operations You can display the folder list/file list and select Monitor indication control a file directly while playing. To change monitor indication Audio MPEG JPEG MPEG While playing..DISP MPEG JPEG MPEG MENU (On the unit) •...
Page 322: Dual Zone Operations
The surround effect is also added to the sound Through the 2nd AUDIO OUT, 2 channel from the speakers when you select “DISC” as signal is emitted. When playing a multi- the source. channel encoded disc, multi-channel signals JVC original headphone virtual surround are downmixed. system.
Page 323 AV Menu settings adjust the item selected. Basic procedure You can adjust various settings of this unit from the AV Menu. The AV Menu contains the menu items and submenus shown on the figure below. Repeat steps to adjust other MENU items if necessary.
Page 324 AV Menu items Indications Selectable settings, [reference page] Demonstration Oﬀ : Cancels. [Initial]; Activates the demonstration movie on the monitor. You can select the background picture of the monitor. Wall Paper Standard [Initial], Rose, Gold, Black, Metal, Metalic-Silver, Metalic-Green, Honeycomb-Red, Honeycomb-Green, Effect-Orange, Effect-Purple, Clown fish, Ocean, Sunset, Earth.
Page 325 Indications Selectable settings, [reference page] You can change the screen shape on the monitor according Aspect to the aspect ratio of the source. Choose the optimum one from the followings. Aspect ratio of incoming signal 16:9 Normal: For original shape of 4:3 Full: [Initial];...
Page 326 Indications Selectable settings, [reference page] Select the initial disc menu language. Menu Language Select the initial audio language. Audio Language Sub Title Select the initial subtitle language or erase the subtitle (OFF). OSD Language Select the language for some indications shown on the external monitor.
Page 327 Indications Selectable settings, [reference page] You can enjoy a powerful sound at low or middle volume D. (Dynamic) Range Compres. levels while playing a Dolby Digital software. (Compression) • AUTO : Select this to apply the effect to multi-channel encoded software (excluding 1-channel and 2-channel software).
Page 328 Indications Selectable settings, [reference page] You can adjust the output level of each speaker monitoring Speaker Level* the test tone. Press and hold ENT to activate (or cancel) the test tone. • Front Lch/Center ch/Front Rch/Rear Rch/ Subwoofer* /Rear Lch: adjust the output level of each speaker in the range of –10dB –+10dB.
Page 329 (The monitor on the receiver only; the normal rear view appears on the external monitor.) Changer/iPod/D. Player * External Input [Initial]; To use a JVC CD changer, iPod, JVC D. player, etc. [42, 45] External Input: To use any external component other than above. [44] Reverse lamp wire connection is required.
Page 330 Indications Selectable settings, [reference page] Beep You can deactivate the key-touch tone if you do not want it to beep each time you press a button. Oﬀ : Cancels. [Initial]; Activates the key-touch tone. Telephone Muting Oﬀ : [Initial]; Cancels. Muting1/Muting2: Select either one which mutes the sounds while using the cellular phone.
Page 331 Indications Selectable settings, [reference page] Adjust fader—speaker output balance between the front and Fader/Balance rear speakers. •Upmost—front only •Downmost—rear only When using a two-speaker system, set the fader to the center (00). Adjust balance—speaker output balance between the left and right speakers.
Page 332 Indications Selectable settings, [reference page] Ampliﬁ er Gain You can change the maximum volume level of this receiver. Ampliﬁ er Oﬀ : Deactivates the built-in amplifier. Low Power: VOL 00 – VOL 30 (Select this if the maximum power of the speaker is less than 50 W to prevent the speaker from being damaged.) High Power: [Initial];...
Page 333: Other Main Functions
Assign a title. Other main functions 1 Select a character set. DISP Assigning titles to the sources You can assign titles to station frequencies and CDs (both in this receiver and in the CD 2 Select a character. changer), and change the source names of AV- INPUT and EXT-INPUT.
Page 334: Cd Changer Operations
CD changer operations Select a disc. MENU About the CD changer It is recommended to use the JVC MP3- compatible CD changer with your unit. Select “List”, then the disc you want to • Disc text information recorded in the CD play back.
Page 335 To go to the next or previous folders (only for Selectable modes MP3 discs) Deactivates Intro/Repeat/Random playback. Intro Mode Plays the first 15 seconds of Track: All tracks of the inserted discs. • lights up. Folder*: First tracks of all folders in the When using the remote controller..
Page 336: External Component Operations
Adjust the volume. External component operations Playing an external component You can connect an external component to LINE IN plug and VIDEO IN plug on the rear, Adjust the equalizer as you want. (See or to the CD changer jack on the rear using the pages 38.) KS-U57 Line Input Adapter (not supplied) or KS-U58 AUX Input Adapter (not supplied).
Page 337: Ipod®/D. Player Operations
Adjust the volume. This unit is ready for operating an Apple iPod or a JVC D. player from the control panel. • You can also use the equivalent buttons on the remote controller in the operations below.
Page 338 Select “Mode”, then your desired Selecting a track from the menu playback mode. Enter the main menu of the iPod or D. player. Now the 5/∞/ 4/¢ buttons Finish the procedure. work as the menu selecting buttons* Select the desired menu. Selectable modes For iPod: Deactivates Repeat/Random playback.
Page 339: Maintenance
To keep discs clean Maintenance A dirty disc may not play correctly. If a disc does become dirty, wipe it How to clean the connectors with a soft cloth in a straight line from center to edge. Frequent detachment will deteriorate the •...
Page 340: Language Codes
Language codes Code Language Code Language Code Language Afar Inupiak Kirundi Abkhazian Indonesian Rumanian Afrikaans Icelandic Kinyarwanda Ameharic Hebrew Sanskrit Arabic Yiddish Sindhi Assamese Javanese Sangho Aymara Georgian Serbo-Croatian Azerbaijani Kazakh Singhalese Bashkir Greenlandic Slovak Byelorussian Cambodian Slovenian Bulgarian Kannada Samoan Bihari Korean (KOR)
Page 341: More About This Receiver
More about this receiver Basic operations Disc operations Turning on the power General • By pressing SRC on the receiver, you can also • In this manual, words “track” and “file” are turn on the power. interchangeably used when referring to the music/picture/movie files and their file names.
Page 342 Playing a Recordable/Rewritable disc Playing an MP3/WMA/WAV disc • Use only “finalized” discs. • This receiver can play back MP3/WMA/WAV • This receiver can play back either MP3/ files with the extension code <.mp3>, <.wma> WMA/WAV files, JPEG files, or MPEG or <.wav>...
Page 343 • This receiver can play back the files recorded Playing an MPEG disc in VBR (variable bit rate). • This receiver can play back MPEG 1/2 files The files recorded in VBR have a discrepancy with the extension code <.mpg>. in elapsed time display, and do not show •...
Page 344 Perform all operations from this For iPod users: <http://www.jvc.co.jp/ unit. english/car/support/ks-pd100/index.html> • The text information may not be displayed For D. player users: <http://www.jvc.co.jp/ correctly. english/car/support/ks-pd500/index.html> – Some characters such as accented letters cannot be shown correctly on the display.
Page 345 On-screen guide icons During play, the following guide icons may appear for a while on the monitor. : Appears at the beginning of a scene containing multi-audio languages (for DVD only). : Appears at the beginning of a scene containing multi-subtitle languages (for DVD only). : Appears at the beginning of a scene containing multi-angle views (for DVD only).
Page 346: Troubleshooting
Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Remedies/Causes • Sound cannot be heard from the • Adjust the volume to the optimum level. speakers. • Check the cords and connections. Check the cords and connections.
Page 347 Symptoms Remedies/Causes • No picture appears on the external • Connect the video cord correctly. monitor at all. • Select a correct input on the monitor. • The edges of the picture are missing • Select an aspect other than “Zoom”. (See page on the screen.
Page 348 Symptoms Remedies/Causes • The iPod or D. player does not turn • Check the connecting cable and its connection. on or does not work. • Update the firmware version of the D. player. • Charge the battery of the iPod/D. player. •...
Page 349: Specifications
Specifications AUDIO AMPLIFIER SECTION DVD/CD PLAYER SECTION Signal Detection System: Non-contact optical Maximum Power Output: pickup (semiconductor laser) Front: 50 W per channel Number of Channels: 2 channels (stereo) Rear: 50 W per channel Frequency Response: Continuous Power Output (RMS): Front: 20 W per channel into 4 Ω, 40 Hz DVD fs=48 kHz: 16 Hz to 22 000 Hz...
Page 350 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit EN, CT, TH © 2006 Victor Company of Japan, Limited 0206MNMMDWJEIN...
Page 351 ‚«≈∑Ï À“°√∂¬πµÏ ¢ Õß§ ÿ ≥ ‰¡ Ë ‰¥È „™È √ –∫∫π ’ È µÈÕß„™È ‡ §√ ◊ Ë Õ ß·ª≈ß°√– inverter is required, which can be purchased at JVC car audio dealers. ·‰ø™Ë « ¬ ´ ÷ Ë ß “¡“√∂À“´ ◊ ÈÕ‰¥È®“°√È “ π¢“¬‡§√ ◊ Ë Õ ß‡ ’ ¬ ß√∂¬πµÏ...
Page 352 Ω • „™È æ ‘ ° — ¥ ®”‡æ“–·∑πø‘ « À“°ø‘ « Ï ¢ “¥∫Ë Õ ¬ „ÀÈ ª √÷ ° …“√È “ π¢“¬‡§√◊ Ë Õ ß‡’ ¬ ß√∂¬πµÏ consult your JVC car audio dealer. 8 Ω 50 W Amplifier Gain •...
Page 353 PRECAUTIONS on power supply and speaker ¢È Õ §«√√–«— ß ”À√— ∫ °“√µË Õ ·À≈Ë ß ®Ë “ ¬°”≈— ß ·≈–≈”‚æß: connections: • • Õ¬Ë “ µË Õ “¬µ–°— Ë « ‡§‡∫‘ ≈ °”≈— ß ¢Õß≈”‚æß‡¢È “ °— ∫ ·∫µ‡µÕ√’ Ë √ ∂¬πµÏ ¡‘ © –π— È π ™ÿ ¥ ª√– •...
Page 354 °“√µË Õ “¬‰ø ”À√— ∫ °≈È Õ ß¥È “ πÀ≈— ß Locate the back lamp lead in the Purple with white stripe Back lamp lead trunk. KD-AVX2 ’ ¡ Ë « ß·∂∫¢“« “¬‰ø¢Õß‰ø∑È “ ¬√∂¬πµÏ REVERSE GEAR SIGNAL À“µ”·ÀπË ß “¬‰ø¢Õß‰ø∑È “ ¬√∂¬πµÏ „ πΩ“°√–...
Page 355 (if coated with paint, remove the paint before attaching the wire). Failure to do so ≈”‚æßÀ≈— ß may cause damage to the receiver. KD-AVX2 JVC Amplifier JVC Amplifier ‡§√◊ Ë Õ ß¢¬“¬‡’ ¬ ß ‡§√◊ Ë Õ ß¢¬“¬‡’ ¬ ß...
Page 356 Before connecting the external components, make sure that the receiver is turned off. JVC CD changer / JVC CD / ‡§√◊ Ë Õ ß‡≈Ë π ´’ ¥ ’ CD JVC • Set “External Input” to “Changer/iPod/D. Player” (see page 37 of the INSTRUCTIONS). / “External Input” ( “Changer/iPod/D.
Page 357 DVD/CD RECEIVER KD-AVX2 ALAT PENERIMA DVD/CD KD-AVX2 EXTRA MONITOR CONTROL MODE ASPECT MENU DVD / RECEIVER CONTROL ASPECT KD-AVX2 ZOOM MENU SOURCE –100 +100 BAND –10 DIRECT DISP DUAL ASPECT DISC+ TOP M MENU 2nd VOL ENTER 7 / BACK DISC–...
Page 358 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.
Page 359 WARNINGS: Caution on volume setting: • DO NOT install any receiver in locations Discs produce very little noise compared where; with other sources. Lower the volume – it may obstruct the steering wheel and before playing a disc to avoid damaging gearshift lever operations, as this may the speakers by the sudden increase of the result in a traffic accident.
Page 360 Introduction—Playable discs Discs you can play Discs cannot be played back You can play back the following discs—12 cm DVD-ROM (data), DVD-RAM, DVD-R/DVD- and 8 cm—on this receiver: RW recorded in the DVD-VR format, CD- • DVD Video: Recorded in NTSC or PAL color ROM, CD-I (CD-I Ready), Photo CD, etc.
Page 361: Rm-Rk240
Contents How to read this manual The following methods are used to make the Control panel ....... 6 explanations simple and easy-to-understand: Remote controller — ..7 RM-RK240 • Some related tips and notes are explained Getting started ......10 in “More about this receiver”...
Page 362: Control Panel
Control panel Parts identification Monitor indications Ex.: Source screen on JPEG playback ASPECT KD-AVX2 MENU DISP 7 / BACK BAND Monitor indications (standby/on attenuator) button 2 • +/– (volume +/–) button r Source indicator • SRC (source) button t Main display •...
Page 363: Remote Controller
How to detach/attach the control panel Detaching... Attaching... How to change the control panel angle Angle 3 Angle 4 Angle 1 Angle 2 Caution: Do not insert your finger behind the control panel. Remote controller — RM-RK240 Installing the lithium coin battery Before using the remote controller: (CR2025) •...
Page 364 Warning: IMPORTANT: • Do not install any battery other than If Dual Zone is activated (see page 30), CR2025 or its equivalent; otherwise, it may the remote controller only functions for explode. operating the DVD/CD player. • Store the battery in a place where children cannot reach to avoid risk of accidents.
Page 365 • 5 / ∞ Controllable only if your monitor is one of the ∞: Pauses/stops or resumes playback. JVC monitors — KV-MR9010 or 5: Enters the main menu of iPod/D. KV-MH6510. player. (Now 5 / ∞/4 / ¢ work as Th ese buttons function as the number buttons when pressed with SHIFT button.
Page 366: Getting Started
To drop the volume in a moment (ATT) Getting started To restore the sound, press it again. Basic operations Turn on the power. To turn off the power Ÿ DISP Canceling demonstration and setting the clock MENU You cannot select some sources if they are not ready.
Page 367 • See the example on “Basic procedure of AV Finish the procedure. Menu operation” below to change the clock from 12 hours to 24 hours. Basic procedure of AV Menu operation You can adjust various settings of the unit from AV Menu. Ex.: To change the clock from 12 hours to 24 •...
Page 368: Radio Operations
When an FM stereo broadcast is hard to Radio operations receive MENU DISP TUNER (FM1/2/3,AM) 2 Select “Mode”, “Mono”, then “On”. Ÿ 7 / BACK BAND Selected band appears. 3 Finish the procedure. Lights up when receiving an FM stereo broadcast with sufficient Lights up when monaural mode is activated.
Page 369 3 Finish the procedure. Manual presetting After tuning in the station you want to preset... MENU Lights up when “Local” mode is activated. Select “List”, then a preset number Only stations with sufficient signal strength (1–6) you want to store the station will be detected.
Page 370 • You can change the preset list between Listening to a preset station FM1/2/3 by pressing and holding 5/∞ buttons (or by pressing 5/∞ buttons repeatedly) when selecting any of the FM bands. DISP TUNER (FM1/2/3,AM) 7 / BACK BAND When using the remote controller...
Page 371: Disc Operations
The following marks are used to indicate Disc operations the playable discs... Playing a disc in the receiver Audio The disc type is automatically detected, and DVD Video DVD Audio Video CD with/without playback starts automatically (for DVD Video/ Audio: automatic start depends on its internal JPEG program).
Page 372 • When inserting a DVD video/DVD Audio • When inserting an MP3/WMA/WAV/JPEG/ disc: MPEG disc* Video/picture playback starts automatically After showing the total folder and file on the monitor when the parking brake is number... applied. Ex.: When an WAV file is detected •...
Page 373 Basic operations Operations Monitor indication and/or next operation To stop playback When you start playback again, playback starts from where it has been stopped 7 / BACK (Resume play). BAND To stop play temporarily Playback is paused. A still picture appears. A Frame by frame playback MPEG MPEG...
Page 374 To go to the next or previous chapters/tracks To locate a particular title/chapter/track directly • For DVD: During play or pause • For DVD Video/DVD Audio: During play or pause—select a chapter/ track. During stop—select a title/track. • For MP3/WMA/WAV/JPEG/MPEG: Select a track within the same folder.
Page 375 To locate a particular title/ To skip to the next or previous scene MPEG MPEG group/folder Audio You can skip the scene back and forward by 5 minutes. MPEG MPEG JPEG Ex.: when you are playing a 24-minute MPEG file and the elapsed playing time is 8’24”... Within 10 seconds, press the number buttons (see page 9).
Page 376: Unique Disc Functions
Unique disc functions Selecting subtitles You can select the language of the subtitle to be shown on the monitor. Selecting audio languages • You can set the initial subtitle language using the AV Menu (see page 34). For DVD: You can select the language to listen to if the disc has multiple audio languages.
Page 377 Canceling the PBC playback Disc menu operations Menu-driven playback is possible while playing back a DVD with menu-driven features or a VCD with the PBC (PlayBack Control). 2 Select a track to start normal playback using the number buttons (see page 9). While playing a DVD Audio To resume the PBC function...
Page 378: Disc Surround Playback
Playing back a bonus group Selecting Browsable still pictures Some DVD Audio discs have a special While playing back a track linked to group called “bonus group” whose browsable still pictures (B.S.P.), you can Audio Audio contents are not open to the public. select (turn the page) the still picture to be •...
Page 379 *1: Manufactured under license from Dolby *1 No sound comes out of the rear speakers Laboratories. Dolby, Pro Logic, MLP Lossless, and the subwoofer when the FRONT 2CH and the double-D symbol are the trademarks indicator appears on the monitor. of Dolby Laboratories.
Page 380: On-Screen Disc Operations
On-Screen disc operations Operations using the on-screen bar You can check the disc information and use some functions through MPEG JPEG MPEG the on-screen bar. Audio On-screen bar T02-C03 TOTAL 1:25:58 Information DVD -V C. RPT TIME TITLE CHAP Operation Disc type Remaining time of the current •...
Page 381 To search for a particular point by playing Basic on-screen bar operations time 1 Select Display the on-screen bar. 2 Enter the elapsed playing time of the current title or of the disc. (twice) DVD -V T02-C03 TOTAL 1:25:58 C. RPT TIME TITLE CHAP...
Page 382 8 Track information (Not appears on JPEG/ Basic control screen operations MPEG playback) 9 Track (file) list You can search for and play the desired items p Current track (file) (highlighted bar) through the control screen when using the external monitor. To select a folder or track MPEG JPEG...
Page 383 While Dual Zone is on and the disc play stops... List screen operations Display the folder list. Each time you press the button, You can display the folder list/track list before the list screen comes on and starting play when using the external monitor goes off.
Page 384: Other Disc Operations
Repeat Other disc operations • For VCD: While PBC (see page 21) is not Selecting the playback modes in use. You can use only one of the following playback modes at a time. Mode Plays repeatedly Chapter* The current chapter. MENU •...
Page 385 List screen operations Other operations You can display the folder list/file list and select Monitor indication control a file directly while playing. To change monitor indication Audio MPEG JPEG MPEG While playing..DISP MPEG JPEG MPEG MENU (On the unit) •...
Page 386: Dual Zone Operations
The surround effect is also added to the sound Through the 2nd AUDIO OUT, 2 channel from the speakers when you select “DISC” as signal is emitted. When playing a multi- the source. channel encoded disc, multi-channel signals JVC original headphone virtual surround are downmixed. system.
Page 387 AV Menu settings adjust the item selected. Basic procedure You can adjust various settings of this unit from the AV Menu. The AV Menu contains the menu items and submenus shown on the figure below. Repeat steps to adjust other MENU items if necessary.
Page 388 AV Menu items Indications Selectable settings, [reference page] Demonstration Oﬀ : Cancels. [Initial]; Activates the demonstration movie on the monitor. You can select the background picture of the monitor. Wall Paper Standard [Initial], Rose, Gold, Black, Metal, Metalic-Silver, Metalic-Green, Honeycomb-Red, Honeycomb-Green, Effect-Orange, Effect-Purple, Clown fish, Ocean, Sunset, Earth.
Page 389 Indications Selectable settings, [reference page] You can change the screen shape on the monitor according Aspect to the aspect ratio of the source. Choose the optimum one from the followings. Aspect ratio of incoming signal 16:9 Normal: For original shape of 4:3 Full: [Initial];...
Page 390 Indications Selectable settings, [reference page] Select the initial disc menu language. Menu Language Select the initial audio language. Audio Language Sub Title Select the initial subtitle language or erase the subtitle (OFF). OSD Language Select the language for some indications shown on the external monitor.
Page 391 Indications Selectable settings, [reference page] You can enjoy a powerful sound at low or middle volume D. (Dynamic) Range Compres. levels while playing a Dolby Digital software. (Compression) • AUTO : Select this to apply the effect to multi-channel encoded software (excluding 1-channel and 2-channel software).
Page 392 Indications Selectable settings, [reference page] You can adjust the output level of each speaker monitoring Speaker Level* the test tone. Press and hold ENT to activate (or cancel) the test tone. • Front Lch/Center ch/Front Rch/Rear Rch/ Subwoofer* /Rear Lch: adjust the output level of each speaker in the range of –10dB –+10dB.
Page 393 (The monitor on the receiver only; the normal rear view appears on the external monitor.) Changer/iPod/D. Player * External Input [Initial]; To use a JVC CD changer, iPod, JVC D. player, etc. [42, 45] External Input: To use any external component other than above. [44] Reverse lamp wire connection is required.
Page 394 Indications Selectable settings, [reference page] Beep You can deactivate the key-touch tone if you do not want it to beep each time you press a button. Oﬀ : Cancels. [Initial]; Activates the key-touch tone. Telephone Muting Oﬀ : [Initial]; Cancels. Muting1/Muting2: Select either one which mutes the sounds while using the cellular phone.
Page 395 Indications Selectable settings, [reference page] Adjust fader—speaker output balance between the front and Fader/Balance rear speakers. •Upmost—front only •Downmost—rear only When using a two-speaker system, set the fader to the center (00). Adjust balance—speaker output balance between the left and right speakers.
Page 396 Indications Selectable settings, [reference page] Ampliﬁ er Gain You can change the maximum volume level of this receiver. Ampliﬁ er Oﬀ : Deactivates the built-in amplifier. Low Power: VOL 00 – VOL 30 (Select this if the maximum power of the speaker is less than 50 W to prevent the speaker from being damaged.) High Power: [Initial];...
Page 397: Other Main Functions
Assign a title. Other main functions 1 Select a character set. DISP Assigning titles to the sources You can assign titles to station frequencies and CDs (both in this receiver and in the CD 2 Select a character. changer), and change the source names of AV- INPUT and EXT-INPUT.
Page 398: Cd Changer Operations
CD changer operations Select a disc. MENU About the CD changer It is recommended to use the JVC MP3- compatible CD changer with your unit. Select “List”, then the disc you want to • Disc text information recorded in the CD play back.
Page 399 To go to the next or previous folders (only for Selectable modes MP3 discs) Deactivates Intro/Repeat/Random playback. Intro Mode Plays the first 15 seconds of Track: All tracks of the inserted discs. • lights up. Folder*: First tracks of all folders in the When using the remote controller..
Page 400: External Component Operations
Adjust the volume. External component operations Playing an external component You can connect an external component to LINE IN plug and VIDEO IN plug on the rear, Adjust the equalizer as you want. (See or to the CD changer jack on the rear using the pages 38.) KS-U57 Line Input Adapter (not supplied) or KS-U58 AUX Input Adapter (not supplied).
Page 401: Ipod®/D. Player Operations
Adjust the volume. This unit is ready for operating an Apple iPod or a JVC D. player from the control panel. • You can also use the equivalent buttons on the remote controller in the operations below.
Page 402 Select “Mode”, then your desired Selecting a track from the menu playback mode. Enter the main menu of the iPod or D. player. Now the 5/∞/ 4/¢ buttons Finish the procedure. work as the menu selecting buttons* Select the desired menu. Selectable modes For iPod: Deactivates Repeat/Random playback.
Page 403: Maintenance
To keep discs clean Maintenance A dirty disc may not play correctly. If a disc does become dirty, wipe it How to clean the connectors with a soft cloth in a straight line from center to edge. Frequent detachment will deteriorate the •...
Page 404: Language Codes
Language codes Code Language Code Language Code Language Afar Inupiak Kirundi Abkhazian Indonesian Rumanian Afrikaans Icelandic Kinyarwanda Ameharic Hebrew Sanskrit Arabic Yiddish Sindhi Assamese Javanese Sangho Aymara Georgian Serbo-Croatian Azerbaijani Kazakh Singhalese Bashkir Greenlandic Slovak Byelorussian Cambodian Slovenian Bulgarian Kannada Samoan Bihari Korean (KOR)
Page 405: More About This Receiver
More about this receiver Basic operations Disc operations Turning on the power General • By pressing SRC on the receiver, you can also • In this manual, words “track” and “file” are turn on the power. interchangeably used when referring to the music/picture/movie files and their file names.
Page 406 Playing a Recordable/Rewritable disc Playing an MP3/WMA/WAV disc • Use only “finalized” discs. • This receiver can play back MP3/WMA/WAV • This receiver can play back either MP3/ files with the extension code <.mp3>, <.wma> WMA/WAV files, JPEG files, or MPEG or <.wav>...
Page 407 • This receiver can play back the files recorded Playing an MPEG disc in VBR (variable bit rate). • This receiver can play back MPEG 1/2 files The files recorded in VBR have a discrepancy with the extension code <.mpg>. in elapsed time display, and do not show •...
Page 408 Perform all operations from this For iPod users: <http://www.jvc.co.jp/ unit. english/car/support/ks-pd100/index.html> • The text information may not be displayed For D. player users: <http://www.jvc.co.jp/ correctly. english/car/support/ks-pd500/index.html> – Some characters such as accented letters cannot be shown correctly on the display.
Page 409 On-screen guide icons During play, the following guide icons may appear for a while on the monitor. : Appears at the beginning of a scene containing multi-audio languages (for DVD only). : Appears at the beginning of a scene containing multi-subtitle languages (for DVD only). : Appears at the beginning of a scene containing multi-angle views (for DVD only).
Page 410: Troubleshooting
Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Remedies/Causes • Sound cannot be heard from the • Adjust the volume to the optimum level. speakers. • Check the cords and connections. Check the cords and connections.
Page 411 Symptoms Remedies/Causes • No picture appears on the external • Connect the video cord correctly. monitor at all. • Select a correct input on the monitor. • The edges of the picture are missing • Select an aspect other than “Zoom”. (See page on the screen.
Page 412 Symptoms Remedies/Causes • The iPod or D. player does not turn • Check the connecting cable and its connection. on or does not work. • Update the firmware version of the D. player. • Charge the battery of the iPod/D. player. •...
Page 413: Specifications
Specifications AUDIO AMPLIFIER SECTION DVD/CD PLAYER SECTION Signal Detection System: Non-contact optical Maximum Power Output: pickup (semiconductor laser) Front: 50 W per channel Number of Channels: 2 channels (stereo) Rear: 50 W per channel Frequency Response: Continuous Power Output (RMS): Front: 20 W per channel into 4 Ω, 40 Hz DVD fs=48 kHz: 16 Hz to 22 000 Hz...
Page 414 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Ada MASALAH dengan cara pengoperasian? Setel kembali unit Anda Lihat halaman mengenai Bagaimana mereset unit anda EN, IN 0206MNMMDWJEIN © 2006 Victor Company of Japan, Limited...
Page 415 . If your vehicle anda tidak memiliki sistem ini, sebuah pembalik tegangan diperlukan, yang mana dapat dibeli di penyalur-penyalur does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers. audio mobil JVC.
Page 416 Notes: Catatan: • Replace the fuse with one of the specified rating. If the fuse blows frequently, consult your JVC car audio dealer. • Ganti sekring dengan voltase yang sudah ditetapkan. Jika sekring sering meledak, konsultasikan pada penyalur audio •...
Page 417 Parking brake Back lamps Rem parkir Lampu belakang To metallic body or Purple with white stripe KD-AVX2 chassis of the car Ungu dengan strip putih Ke besi bodi atau casis REVERSE GEAR SIGNAL dari Parking brake Parking brake switch (inside the car)
Page 418 Before connecting the external components, make sure that the receiver is turned off. JVC CD changer / Alat pengganti CD JVC Apple iPod®/JVC D. player / Apple iPod®/JVC D. player • Set “External Input” to “Changer/iPod/D. Player” (see page 37 of the INSTRUCTIONS). / Aturlah •...
Page 419 DVD/CD RECEIVER KD-AVX2 EXTRA MONITOR CONTROL MODE ASPECT MENU DVD / RECEIVER CONTROL ASPECT KD-AVX2 ZOOM MENU SOURCE –100 +100 BAND –10 DIRECT DISP DUAL ASPECT DISC+ TOP M MENU 2nd VOL ENTER 7 / BACK DISC– SETUP RETURN BAND...
Page 420 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.
Page 421 WARNINGS: Caution on volume setting: • DO NOT install any receiver in locations Discs produce very little noise compared where; with other sources. Lower the volume – it may obstruct the steering wheel and before playing a disc to avoid damaging gearshift lever operations, as this may the speakers by the sudden increase of the result in a traffic accident.
Page 422 Introduction—Playable discs Discs you can play Discs cannot be played back You can play back the following discs—12 cm DVD-ROM (data), DVD-RAM, DVD-R/DVD- and 8 cm—on this receiver: RW recorded in the DVD-VR format, CD- • DVD Video: Recorded in NTSC or PAL color ROM, CD-I (CD-I Ready), Photo CD, etc.
Page 423: Rm-Rk240
Contents How to read this manual The following methods are used to make the Control panel ....... 6 explanations simple and easy-to-understand: Remote controller — ..7 RM-RK240 • Some related tips and notes are explained Getting started ......10 in “More about this receiver”...
Page 424: Control Panel
Control panel Parts identification Monitor indications Ex.: Source screen on JPEG playback ASPECT KD-AVX2 MENU DISP 7 / BACK BAND Monitor indications (standby/on attenuator) button 2 • +/– (volume +/–) button r Source indicator • SRC (source) button t Main display •...
Page 425: Remote Controller
How to detach/attach the control panel Detaching... Attaching... How to change the control panel angle Angle 3 Angle 4 Angle 1 Angle 2 Caution: Do not insert your finger behind the control panel. Remote controller — RM-RK240 Installing the lithium coin battery Before using the remote controller: (CR2025) •...
Page 426 Warning: IMPORTANT: • Do not install any battery other than If Dual Zone is activated (see page 30), CR2025 or its equivalent; otherwise, it may the remote controller only functions for explode. operating the DVD/CD player. • Store the battery in a place where children cannot reach to avoid risk of accidents.
Page 427 • 5 / ∞ Controllable only if your monitor is one of the ∞: Pauses/stops or resumes playback. JVC monitors — KV-MR9010 or 5: Enters the main menu of iPod/D. KV-MH6510. player. (Now 5 / ∞/4 / ¢ work as Th ese buttons function as the number buttons when pressed with SHIFT button.
Page 428: Getting Started
To drop the volume in a moment (ATT) Getting started To restore the sound, press it again. Basic operations Turn on the power. To turn off the power Ÿ DISP Canceling demonstration and setting the clock MENU You cannot select some sources if they are not ready.
Page 429 • See the example on “Basic procedure of AV Finish the procedure. Menu operation” below to change the clock from 12 hours to 24 hours. Basic procedure of AV Menu operation You can adjust various settings of the unit from AV Menu. Ex.: To change the clock from 12 hours to 24 •...
Page 430: Radio Operations
When an FM stereo broadcast is hard to Radio operations receive MENU DISP TUNER (FM1/2/3,AM) 2 Select “Mode”, “Mono”, then “On”. Ÿ 7 / BACK BAND Selected band appears. 3 Finish the procedure. Lights up when receiving an FM stereo broadcast with sufficient Lights up when monaural mode is activated.
Page 431 3 Finish the procedure. Manual presetting After tuning in the station you want to preset... MENU Lights up when “Local” mode is activated. Select “List”, then a preset number Only stations with sufficient signal strength (1–6) you want to store the station will be detected.
Page 432 • You can change the preset list between Listening to a preset station FM1/2/3 by pressing and holding 5/∞ buttons (or by pressing 5/∞ buttons repeatedly) when selecting any of the FM bands. DISP TUNER (FM1/2/3,AM) 7 / BACK BAND When using the remote controller...
Page 433: Disc Operations
The following marks are used to indicate Disc operations the playable discs... Playing a disc in the receiver Audio The disc type is automatically detected, and DVD Video DVD Audio Video CD with/without playback starts automatically (for DVD Video/ Audio: automatic start depends on its internal JPEG program).
Page 434 • When inserting a DVD video/DVD Audio • When inserting an MP3/WMA/WAV/JPEG/ disc: MPEG disc* Video/picture playback starts automatically After showing the total folder and file on the monitor when the parking brake is number... applied. Ex.: When an WAV file is detected •...
Page 435 Basic operations Operations Monitor indication and/or next operation To stop playback When you start playback again, playback starts from where it has been stopped 7 / BACK (Resume play). BAND To stop play temporarily Playback is paused. A still picture appears. A Frame by frame playback MPEG MPEG...
Page 436 To go to the next or previous chapters/tracks To locate a particular title/chapter/track directly • For DVD: During play or pause • For DVD Video/DVD Audio: During play or pause—select a chapter/ track. During stop—select a title/track. • For MP3/WMA/WAV/JPEG/MPEG: Select a track within the same folder.
Page 437 To locate a particular title/ To skip to the next or previous scene MPEG MPEG group/folder Audio You can skip the scene back and forward by 5 minutes. MPEG MPEG JPEG Ex.: when you are playing a 24-minute MPEG file and the elapsed playing time is 8’24”... Within 10 seconds, press the number buttons (see page 9).
Page 438: Unique Disc Functions
Unique disc functions Selecting subtitles You can select the language of the subtitle to be shown on the monitor. Selecting audio languages • You can set the initial subtitle language using the AV Menu (see page 34). For DVD: You can select the language to listen to if the disc has multiple audio languages.
Page 439 Canceling the PBC playback Disc menu operations Menu-driven playback is possible while playing back a DVD with menu-driven features or a VCD with the PBC (PlayBack Control). 2 Select a track to start normal playback using the number buttons (see page 9). While playing a DVD Audio To resume the PBC function...
Page 440: Disc Surround Playback
Playing back a bonus group Selecting Browsable still pictures Some DVD Audio discs have a special While playing back a track linked to group called “bonus group” whose browsable still pictures (B.S.P.), you can Audio Audio contents are not open to the public. select (turn the page) the still picture to be •...
Page 441 *1: Manufactured under license from Dolby *1 No sound comes out of the rear speakers Laboratories. Dolby, Pro Logic, MLP Lossless, and the subwoofer when the FRONT 2CH and the double-D symbol are the trademarks indicator appears on the monitor. of Dolby Laboratories.
Page 442: On-Screen Disc Operations
On-Screen disc operations Operations using the on-screen bar You can check the disc information and use some functions through MPEG JPEG MPEG the on-screen bar. Audio On-screen bar T02-C03 TOTAL 1:25:58 Information DVD -V C. RPT TIME TITLE CHAP Operation Disc type Remaining time of the current •...
Page 443 To search for a particular point by playing Basic on-screen bar operations time 1 Select Display the on-screen bar. 2 Enter the elapsed playing time of the current title or of the disc. (twice) DVD -V T02-C03 TOTAL 1:25:58 C. RPT TIME TITLE CHAP...
Page 444 8 Track information (Not appears on JPEG/ Basic control screen operations MPEG playback) 9 Track (file) list You can search for and play the desired items p Current track (file) (highlighted bar) through the control screen when using the external monitor. To select a folder or track MPEG JPEG...
Page 445 While Dual Zone is on and the disc play stops... List screen operations Display the folder list. Each time you press the button, You can display the folder list/track list before the list screen comes on and starting play when using the external monitor goes off.
Page 446: Other Disc Operations
Repeat Other disc operations • For VCD: While PBC (see page 21) is not Selecting the playback modes in use. You can use only one of the following playback modes at a time. Mode Plays repeatedly Chapter* The current chapter. MENU •...
Page 447 List screen operations Other operations You can display the folder list/file list and select Monitor indication control a file directly while playing. To change monitor indication Audio MPEG JPEG MPEG While playing..DISP MPEG JPEG MPEG MENU (On the unit) •...
Page 448: Dual Zone Operations
The surround effect is also added to the sound Through the 2nd AUDIO OUT, 2 channel from the speakers when you select “DISC” as signal is emitted. When playing a multi- the source. channel encoded disc, multi-channel signals JVC original headphone virtual surround are downmixed. system.
Page 449 AV Menu settings adjust the item selected. Basic procedure You can adjust various settings of this unit from the AV Menu. The AV Menu contains the menu items and submenus shown on the figure below. Repeat steps to adjust other MENU items if necessary.
Page 450 AV Menu items Indications Selectable settings, [reference page] Demonstration Oﬀ : Cancels. [Initial]; Activates the demonstration movie on the monitor. You can select the background picture of the monitor. Wall Paper Standard [Initial], Rose, Gold, Black, Metal, Metalic-Silver, Metalic-Green, Honeycomb-Red, Honeycomb-Green, Effect-Orange, Effect-Purple, Clown fish, Ocean, Sunset, Earth.
Page 451 Indications Selectable settings, [reference page] You can change the screen shape on the monitor according Aspect to the aspect ratio of the source. Choose the optimum one from the followings. Aspect ratio of incoming signal 16:9 Normal: For original shape of 4:3 Full: [Initial];...
Page 452 Indications Selectable settings, [reference page] Select the initial disc menu language. Menu Language Select the initial audio language. Audio Language Sub Title Select the initial subtitle language or erase the subtitle (OFF). OSD Language Select the language for some indications shown on the external monitor.
Page 453 Indications Selectable settings, [reference page] You can enjoy a powerful sound at low or middle volume D. (Dynamic) Range Compres. levels while playing a Dolby Digital software. (Compression) • AUTO : Select this to apply the effect to multi-channel encoded software (excluding 1-channel and 2-channel software).
Page 454 Indications Selectable settings, [reference page] You can adjust the output level of each speaker monitoring Speaker Level* the test tone. Press and hold ENT to activate (or cancel) the test tone. • Front Lch/Center ch/Front Rch/Rear Rch/ Subwoofer* /Rear Lch: adjust the output level of each speaker in the range of –10dB –+10dB.
Page 455 (The monitor on the receiver only; the normal rear view appears on the external monitor.) Changer/iPod/D. Player * External Input [Initial]; To use a JVC CD changer, iPod, JVC D. player, etc. [42, 45] External Input: To use any external component other than above. [44] Reverse lamp wire connection is required.
Page 456 Indications Selectable settings, [reference page] Beep You can deactivate the key-touch tone if you do not want it to beep each time you press a button. Oﬀ : Cancels. [Initial]; Activates the key-touch tone. Telephone Muting Oﬀ : [Initial]; Cancels. Muting1/Muting2: Select either one which mutes the sounds while using the cellular phone.
Page 457 Indications Selectable settings, [reference page] Adjust fader—speaker output balance between the front and Fader/Balance rear speakers. •Upmost—front only •Downmost—rear only When using a two-speaker system, set the fader to the center (00). Adjust balance—speaker output balance between the left and right speakers.
Page 458 Indications Selectable settings, [reference page] Ampliﬁ er Gain You can change the maximum volume level of this receiver. Ampliﬁ er Oﬀ : Deactivates the built-in amplifier. Low Power: VOL 00 – VOL 30 (Select this if the maximum power of the speaker is less than 50 W to prevent the speaker from being damaged.) High Power: [Initial];...
Page 459: Other Main Functions
Assign a title. Other main functions 1 Select a character set. DISP Assigning titles to the sources You can assign titles to station frequencies and CDs (both in this receiver and in the CD 2 Select a character. changer), and change the source names of AV- INPUT and EXT-INPUT.
Page 460: Cd Changer Operations
CD changer operations Select a disc. MENU About the CD changer It is recommended to use the JVC MP3- compatible CD changer with your unit. Select “List”, then the disc you want to • Disc text information recorded in the CD play back.
Page 461 To go to the next or previous folders (only for Selectable modes MP3 discs) Deactivates Intro/Repeat/Random playback. Intro Mode Plays the first 15 seconds of Track: All tracks of the inserted discs. • lights up. Folder*: First tracks of all folders in the When using the remote controller..
Page 462: External Component Operations
Adjust the volume. External component operations Playing an external component You can connect an external component to LINE IN plug and VIDEO IN plug on the rear, Adjust the equalizer as you want. (See or to the CD changer jack on the rear using the pages 38.) KS-U57 Line Input Adapter (not supplied) or KS-U58 AUX Input Adapter (not supplied).
Page 463: Ipod®/D. Player Operations
Adjust the volume. This unit is ready for operating an Apple iPod or a JVC D. player from the control panel. • You can also use the equivalent buttons on the remote controller in the operations below.
Page 464 Select “Mode”, then your desired Selecting a track from the menu playback mode. Enter the main menu of the iPod or D. player. Now the 5/∞/ 4/¢ buttons Finish the procedure. work as the menu selecting buttons* Select the desired menu. Selectable modes For iPod: Deactivates Repeat/Random playback.
Page 465: Maintenance
To keep discs clean Maintenance A dirty disc may not play correctly. If a disc does become dirty, wipe it How to clean the connectors with a soft cloth in a straight line from center to edge. Frequent detachment will deteriorate the •...
Page 466: Language Codes
Language codes Code Language Code Language Code Language Afar Inupiak Kirundi Abkhazian Indonesian Rumanian Afrikaans Icelandic Kinyarwanda Ameharic Hebrew Sanskrit Arabic Yiddish Sindhi Assamese Javanese Sangho Aymara Georgian Serbo-Croatian Azerbaijani Kazakh Singhalese Bashkir Greenlandic Slovak Byelorussian Cambodian Slovenian Bulgarian Kannada Samoan Bihari Korean (KOR)
Page 467: More About This Receiver
More about this receiver Basic operations Disc operations Turning on the power General • By pressing SRC on the receiver, you can also • In this manual, words “track” and “file” are turn on the power. interchangeably used when referring to the music/picture/movie files and their file names.
Page 468 Playing a Recordable/Rewritable disc Playing an MP3/WMA/WAV disc • Use only “finalized” discs. • This receiver can play back MP3/WMA/WAV • This receiver can play back either MP3/ files with the extension code <.mp3>, <.wma> WMA/WAV files, JPEG files, or MPEG or <.wav>...
Page 469 • This receiver can play back the files recorded Playing an MPEG disc in VBR (variable bit rate). • This receiver can play back MPEG 1/2 files The files recorded in VBR have a discrepancy with the extension code <.mpg>. in elapsed time display, and do not show •...
Page 470 Perform all operations from this For iPod users: <http://www.jvc.co.jp/ unit. english/car/support/ks-pd100/index.html> • The text information may not be displayed For D. player users: <http://www.jvc.co.jp/ correctly. english/car/support/ks-pd500/index.html> – Some characters such as accented letters cannot be shown correctly on the display.
Page 471 On-screen guide icons During play, the following guide icons may appear for a while on the monitor. : Appears at the beginning of a scene containing multi-audio languages (for DVD only). : Appears at the beginning of a scene containing multi-subtitle languages (for DVD only). : Appears at the beginning of a scene containing multi-angle views (for DVD only).
Page 472: Troubleshooting
Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Remedies/Causes • Sound cannot be heard from the • Adjust the volume to the optimum level. speakers. • Check the cords and connections. Check the cords and connections.
Page 473 Symptoms Remedies/Causes • No picture appears on the external • Connect the video cord correctly. monitor at all. • Select a correct input on the monitor. • The edges of the picture are missing • Select an aspect other than “Zoom”. (See page on the screen.
Page 474 Symptoms Remedies/Causes • The iPod or D. player does not turn • Check the connecting cable and its connection. on or does not work. • Update the firmware version of the D. player. • Charge the battery of the iPod/D. player. •...
Page 475: Specifications
Specifications AUDIO AMPLIFIER SECTION DVD/CD PLAYER SECTION Signal Detection System: Non-contact optical Maximum Power Output: pickup (semiconductor laser) Front: 50 W per channel Number of Channels: 2 channels (stereo) Rear: 50 W per channel Frequency Response: Continuous Power Output (RMS): Front: 20 W per channel into 4 Ω, 40 Hz DVD fs=48 kHz: 16 Hz to 22 000 Hz...
Page 476 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit 0206MNMMDWJEIN © 2006 Victor Company of Japan, Limited...