Advertisement
Quick Links
Advertisement
Related Manuals for AEG FSE83728P
Summary of Contents for AEG FSE83728P
- Page 1 EN User Manual | Dishwasher FSE83728P...
- Page 2 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
- Page 3 My AEG Kitchen app ENGLISH...
- Page 4 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
- Page 5 similar accommodation where such use does not exceed (average) domestic usage levels. • Do not change the specification of this appliance. • The operating water pressure (minimum and maximum) must be between 0.5 (0.05) / 10 (1) bar (MPa) • Follow the maximum number of 15 place settings. •...
- Page 6 • Warning: this appliance is designed to be installed / connected to a grounding connection in the building. • Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. • Always use a correctly installed shockproof socket.
- Page 7 Refer to Safety chapters. 3.1 Building in min. 550 www.youtube.com/electrolux www.youtube.com/aeg How to install your AEG/Electrolux 60 cm Sliding Door Dishwasher 3.2 Safety caps If the furniture panel is not installed, open the appliance door carefully to avoid the risk of injury.
- Page 8 appliance and may cause an injury. If the plastic cover is damaged, contact the Authorized Service Centre to replace it with the new one. 5 mm ENGLISH...
- Page 9 Scan the QR code with the camera on your mobile device to be redirected to My AEG The lamp goes off when you close the door or Kitchen app in the app store. Follow the switch the appliance off.
- Page 10 5. CONTROL PANEL On/Off button / Reset button Option buttons (EXTRAS) Delay start button / Remote start button AUTO Sense program button Display MY TIME program selection bar 5.1 Display The ECOMETER indicates how the programme selection impacts energy and The display shows the following information: water consumption.
- Page 11 Indicator Description Delay Start indicator. It is on when you set the delay start. Refer to "Daily use". Pause indicator. It flashes when you pause a wash cycle or the delay countdown by opening the appliance door. Refer to "Daily use". Alert indicators.
- Page 12 See dishwashing temperature of the selected chapter "Wireless connection". programme and reduces it to 45 °C. 6.4 Extras in the app My AEG Kitchen app provides additional dishwashing options. To access all options, 6.5 Programmes overview Programme Dishwasher Degree of...
- Page 13 Intermediate rinse • Final rinse • AirDry Automatic door opening during the drying phase. Refer to "Basic settings". Available only through My AEG Kitchen app. Available only through My AEG Kitchen app. Consumption values Water (l) Energy (kWh) Duration (min)
- Page 14 Settings Values Description End sound Activate or deactivate the acoustic signal for the end of a OFF (default) programme. Auto door open ON (default) Activate or deactivate AirDry. Key tones ON (default) Activate or deactivate the sound of the buttons when pressed.
- Page 15 The saved settings remain valid until you How to change a setting change them again. Make sure the appliance is in setting mode. 7.2 The water softener 1. Use Previous or Next to select the The water softener removes minerals from desired setting.
- Page 16 When the prescribed quantity of water (see values in the table) has been used since the previous regeneration process, a new All the consumption values mentioned in regeneration process will be initiated between this section are determined in line with the final rinse and the programme end.
- Page 17 My AEG Kitchen app. This device. You can scan the QR code from the functionality allows you to remotely control rating plate to be redirected to the app (see and monitor your dishwasher.
- Page 18 • Mobile device connected to the wireless connection network. Enter setting mode, select the setting WiFi 1. Launch My AEG Kitchen app on your and change its value to ON. mobile device and follow the instructions Refer to "Daily use" to activate the remote in the app.
- Page 19 process. Do not use detergent and do not 6. Turn the cap of the salt container put dishes in the baskets. clockwise to close the salt container. After starting the programme, the appliance CAUTION! recharges the resin in the water softener for up to 5 minutes.
- Page 20 How to activate the remote start Make sure that the indicator is on and your dishwasher is added in My AEG Kitchen app. If not, refer to "Wireless connection". 1. Press • The light related to the button is on.
- Page 21 • The light related to the selected 2. Close the appliance door to start the programme is on. program. • The ECOMETER indicates the level of The appliance senses the type of load and energy and water consumption. adjusts a suitable wash cycle. During the •...
- Page 22 Opening the door while the appliance Make sure that there is detergent in the operates may affect the energy detergent dispenser before you start a consumption and the programme new programme. duration. 10.10 The Auto Off function This function saves energy by switching the If the door is opened for more than 30 appliance off when it is not operating.
- Page 23 11.3 What to do if you want to stop • Select a programme according to the type using multi-tablets of load and the degree of soil. ECO offers the most efficient use of water and energy Before you start using separately detergent, consumption.
- Page 24 • Put cutlery and small items in the cutlery 2. First remove items from the lower basket, drawer. then from the upper basket. • Move the upper basket upwards to accommodate large items in the lower basket. After the programme is completed, water •...
- Page 25 CAUTION! If unable to remove the foreign objects, contact an Authorised Service Centre. 1. Disassemble the filters system as instructed in this chapter. 2. Remove any foreign objects manually. 3. Reassemble the filters as instructed in 2. Remove the filter (C) out of filter (B). this chapter.
- Page 26 2. Wash the spray arm under running water. 7. Reassemble the filters (B) and (C). Use a thin pointed tool, e.g. a toothpick, 8. Put back the filter (B) in the flat filter (A). to remove particles of soil from the holes. Turn it clockwise until it locks.
- Page 27 2. To detach the spray arm from the basket, holes. Clogged holes can cause press the spray arm upwards and unsatisfactory washing results. simultaneously turn it clockwise. The ceiling spray arm is placed on the ceiling of the appliance. The spray arm (C) is installed in the delivery tube (A) with the mounting element (B).
- Page 28 13. TROUBLESHOOTING Refer to the below table for information on WARNING! possible problems. Improper repair of the appliance may With some problems, the display shows an pose a danger to the safety of the user. alarm code. Any repairs must be performed by qualified personnel.
- Page 29 Problem and alarm code Possible cause and solution Technical malfunction of the appli‐ • Switch the appliance off and on. ance. The display shows iC0 or iC3. The level of water inside the appli‐ • Switch the appliance off and on. ance is too high.
- Page 30 Problem and alarm code Possible cause and solution The appliance switches off during • Complete power outage. The wash cycle is temporarily interrupted and operation. resumes automatically once the power is restored. The display shows Updating. All • The appliance downloads and installs the firmware update automatical‐ buttons are inactive except for the ly when it is available.
- Page 31 Problem Possible cause and solution There are whitish streaks or bluish lay‐ • The released quantity of rinse aid is too high. Adjust the rinse aid ers on glasses and dishes. dosage to a lower level. • The quantity of detergent is too high. There are stains and dry water drops •...
- Page 32 Refer to "Before first use", "Daily use", or "Hints and tips" for other possible causes. 13.2 Problems with wireless connection Problem Possible cause and solution Activating wireless connection is not • Wrong wireless network ID or password. Cancel the setup and start successful.
- Page 33 Water supply min. 5 - max. 60 °C Cold water or hot water Capacity Place settings Refer to the rating plate for other values. If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to de‐ crease energy consumption.
- Page 36 My AEG Kitchen app The software in this product contains components that are based on free and open source software. AEG gratefully acknowledges the contributions of the open software and robotics communities to the development project. To access the source code of these free and open source software components whose license conditions require publishing, and to see their full copyright information and applicable license terms, please visit: http://aeg.opensoftwarerepository.com (folder NIUS)
Need help?
Do you have a question about the FSE83728P and is the answer not in the manual?
Questions and answers