Related Manuals for Philips Brilliance 438P1/11
Summary of Contents for Philips Brilliance 438P1/11
- Page 1 438P1 www.philips.com/welcome EN User manual Customer care and warranty 24 Troubleshooting & FAQs...
- Page 2 4.1 Resolution & Preset Modes ..21 5. Power Management ....23 6. Customer care and warranty . 24 6.1 Philips’ Flat Panel Displays Pixel Defect Policy ......24 6.2 Customer Care & Warranty ..27 7. Troubleshooting & FAQs ..28 7.1 Troubleshooting ......28...
- Page 3 DC power cord for normal operation. 1.1 Safety precautions and • Please use approved power cord maintenance provided by Philips all the time. If your power cord is missing, please Warnings contact with your local service Use of controls, adjustments or center.
- Page 4 1. Important excessive pressure on the LCD Important information for Burn-in/ panel. When moving your monitor, Ghost image grasp the frame to lift; do not lift • Always activate a moving screen the monitor by placing your hand or saver program when you leave fingers on the LCD panel.
- Page 5 1. Important Note Consult a service technician if the monitor does not operate normally, or you are not sure what procedure to take when the operating instructions given in this manual have been followed. 1.2 Notational Descriptions The following subsections describe notational conventions used in this document.
- Page 6 From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end- of-life management primarily entails This marking on the product or on participation in national take-back...
- Page 7 Package contents Brilliance 438P1 Quick Start Register your product and get support at www.philips.com/welcome 2. Align the screw holes on the stands with the rear of the monitor, then using a screwdriver, tighten up the Screw * Remote Control Stand/Base M4 x 14 Batteries AAA R03 1.5V...
- Page 8 2. Setting up the Display Connect to PC Connecting to your PC 1. Connect the power cord to the back of the display firmly. 2. Turn off your computer and unplug its power cable. Fast Charger 3. Connect the display signal cable to 10 9 the video connector on the back of your computer.
- Page 9 2. Setting up the Display Some select Philips displays may not Power or Charge your device when it enters to “Sleep” mode (White power LED blinking). In that case, please enter to OSD Menu and select “USB Standby Mode”, then, turn the function to “ON”...
- Page 10 2. Setting up the Display Customize your own “USER” key 2.2 Operating the Display This hot key allows you to setup your Description of the control buttons favorite function key. 1. Press the button to enter OSD menu screen. ...
- Page 11 Independent audio playback, regardless of video input Your Philips display can play the audio source independently under PIP / PBP mode, regardless of which video input. For example, you can play your MP3 player from the audio source connected...
- Page 12 2. Setting up the Display The remote control is powered by two 1.5V AAA batteries. To install or replace batteries: 1. Press and then slide the cover to open it. 2. Align the batteries according to the (+) and (–) indications inside the battery compartment.
- Page 13 2. Setting up the Display Description of the remote control Access the OSD menu. buttons. Confirm the OSD adjustment. Adjust the OSD menu / Turn down the values. SmartImage.There are multiple selections: Office, Photo, Movie, Game, Economy, LowBlue Mode, SmartUniformity, Off. Return to previous OSD level Turn down the brightness...
- Page 14 On-Screen display. You can use On-Screen Display (OSD) is a feature in this as a reference when you want to all Philips LCD displays. It allows an end work your way around the different user to adjust screen performance or adjustments later on.
- Page 15 How to enable MultiView by OSD menu? Why do I need it? 1. Press the button to enter OSD With the ultra high resolution Philips menu screen. MultiView display, you can experience a world of connectivity in a comfortable PIP / PBP Mode Input way in the office or at home.
- Page 16 2. Setting up the Display [PIP]: Picture in Picture [PBP 4Win]: Picture by Picture Open up a sub-window Open up three sub- side-by-side of other windows of other signal (main) signal source. sources. (main) When the sub sources When the sub source is are not detected.
- Page 17 2. Setting up the Display • Swap: The main picture source and 2.4 Remove the Base Assembly the sub picture source swapped on for VESA Mounting the display. Before you start disassembling the Swap A and B source in [PIP] mode: display base, please follow the instructions below to avoid any possible damage or injury.
- Page 18 ff How does it work? SmartImage is an exclusive, leading • Office: Enhances text and dampens edge Philips technology that analyzes brightness to increase readability the content displayed on your screen. and reduce eye strain. This mode Based on a scenario you select,...
- Page 19 LCD displays. Typical consumption, you save on energy costs uniformity is measured around and extend the lifetime of your display. 75-80%. By enabling Philips How does it work? SmartUniformity feature, display uniformity is increased to above When you activate SmartContrast, it will 95%.
- Page 20 4. Technical Specifications 4. Technical Specifications Picture/Display Display Panel Type IPS LCD Backlight W-LED system Panel Size 42.51" (108 cm) Aspect Ratio 16:9 Pixel Pitch 0.2451 x 0.2451 mm Contrast ratio(typical) 1200:1 VGA: 1920 x 1080 @ 60Hz HDMI 2.0: 3840 x 2160 @ 60Hz Optimum Resolution HDMI 1.4: 3840 x 2160 @ 30Hz DisplayPort: 3840 x 2160 @ 60Hz...
- Page 21 4. Technical Specifications Sleep (Standby mode) 0.3 W (typ.) 0.3 W (typ.) 0.3 W (typ.) Off mode 0.3 W (typ.) 0.3 W (typ.) 0.3 W (typ.) Off mode(AC switch) AC Input AC Input AC Input Heat Dissipation* Voltage at Voltage at Voltage at 100VAC , 50Hz 115VAC , 60Hz...
- Page 22 100% PVC BFR free housing Cabinet Color Black Finish glossy and texture Note 1. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet. 2. SmartUniformity and Delta E information sheets are included in the box.
- Page 23 4. Technical Specifications Video Timing 4.1 Resolution & Preset Modes Resolution V. freq (Hz) Maximum Resolution 1920 x 1080 @ 60 Hz (VGA) 640 x 480P 59.94/60Hz 4:3 3840 x 2160 @ 60 Hz (HDMI2.0/ 720 x 576P 50Hz 4:3 DP1.2) 720 x 576P 50Hz 16:9...
- Page 24 4. Technical Specifications 2. The factory default setting DisplayPort v1.1 supports to the resolution 3840 x 2160 @ 30Hz. For optimized resolution 3840 x 2160 @ 60Hz, please enter to OSD menu and change the setting to DisplayPort v1.2, also please make sure your graphic card supports DisplayPort v1.2.
- Page 25 5. Power Management 5. Power Management If you have VESA DPM compliance display card or software installed in your PC, the display can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the display will 'wake up' automatically.
- Page 26 Pixel Defect Policy sub pixels together appear as a single white pixel. When all are dark, the three Philips strives to deliver the highest colored sub pixels together appear as a quality products. We use some single black pixel. Other combinations of...
- Page 27 30 percent brighter than the warranty period, a TFT display panel neighboring dots. in a Philips flat panel display must have Black Dot Defects pixel or sub pixel defects exceeding the tolerances listed in the following tables.
- Page 28 6. Customer care and warranty BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 12 or fewer 2 adjacent dark subpixels 3 or fewer 3 adjacent dark subpixels...
- Page 29 Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below.
- Page 30 • Disconnect the display from mains OFF position, then press it to the power source immediately for safety ON position. • Contact with Philips customer No Picture (Power LED is White) service representative immediately. • Make sure the computer is turned...
- Page 31 Service contact information listed in been turned off. Important information manual and • Uninterrupted display of still or contact Philips customer service static images over an extended representative. period may cause "burn in", also known as "after-imaging " or 7.2 General FAQs...
- Page 32 Ans.: In general it is recommended disconnect your old display and that the panel surface is not reconnect your Philips LCD display. subjected to excessive shocks • Turn on your display and then turn and is protected from sharp or on your PC.
- Page 33 Can I connect my LCD display to that will not disappear and cannot be any PC, workstation or Mac? repaired. The damage mentioned above Ans.: Yes. All Philips LCD displays are is not covered under your warranty. fully compatible with standard PCs, Macs and workstations.
- Page 34 Where can I find Important Information manual mentioned in EDFU? Ans.: Important Information manual can be download on the Philips Why the sub-windows flickers website support page. when I enable PIP/PBP. Ans: It’s because the sub-windows 7.3 Multiview FAQs...
- Page 35 This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are regis- tered trademarks of Koninklijke Philips N.V. and are used under license.
Need help?
Do you have a question about the Brilliance 438P1/11 and is the answer not in the manual?
Questions and answers