hit counter script
Lenovo ThinkCentre A63 6674 Hardware Maintenance Manual
  1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Desktop
  5. ThinkCentre A63 6674
  6. Hardware maintenance manual
Lenovo ThinkCentre A63 6674 Hardware Maintenance Manual

Lenovo ThinkCentre A63 6674 Hardware Maintenance Manual

Hide thumbs Also See for ThinkCentre A63 6674:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation Manual
ThinkCentre
Hardware Maintenance Manual
Machine Types: 3317, 4013, 4478, 5043, 5237, 5393, 5526, and 6674

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ThinkCentre A63 6674 and is the answer not in the manual?

Questions and answers

Related Manuals for Lenovo ThinkCentre A63 6674

Summary of Contents for Lenovo ThinkCentre A63 6674

  • Page 1 ThinkCentre Hardware Maintenance Manual Machine Types: 3317, 4013, 4478, 5043, 5237, 5393, 5526, and 6674...
  • Page 3 ThinkCentre Hardware Maintenance Manual...
  • Page 4 First Edition (November 2009) © Copyright Lenovo 2009. LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure.

  • Page 5: Table Of Contents

    Installing or replacing a PCI card . . 91 Online Books folder . 39 Replacing the battery . . 93 Lenovo ThinkVantage Tools . . 39 Replacing the power supply assembly . 94 ThinkVantage Productivity Center . . 39 Replacing the heat sink and fan assembly .
  • Page 6 Appendix. Notices ..173 Index ....175 Television output notice . . 174 Trademarks . . 174 Hardware Maintenance Manual...

  • Page 7: Chapter 1. About This Manual

    All the information in this manual is ® intended only for trained Service Providers who are familiar with Lenovo computer products. Before using this information and the product it supports, be sure to read and understand the Chapter 2, “Safety information,” on page 3 and “Notices,”...

  • Page 8: Important Information About Replacing The Rohs Compliant Frus

    FRU part numbers. Lenovo plans to transition to RoHS compliance well before the implementation date and expects its suppliers to be ready to support Lenovo’s requirements and schedule in the EU. Products sold in 2005, will contain some RoHS compliant FRUs.

  • Page 9: Chapter 2. Safety Information

    After service, reinstall all safety shields, guards, labels, and ground wires. Replace any safety device that is worn or defective. v Reinstall all covers correctly before returning the machine to the customer. Electrical safety © Copyright Lenovo 2009...
  • Page 10 CAUTION: Electrical current from power, telephone, and communication cables can be hazardous. To avoid personal injury or equipment damage, disconnect the attached power cords, telecommunication systems, networks, and modems before you open the server/workstation covers, unless instructed otherwise in the installation and configuration procedures.

  • Page 11: Voltage-Selection Switch

    v Always look carefully for possible hazards in your work area. Examples of these hazards are moist floors, nongrounded power extension cables, power surges, and missing safety grounds. v Do not touch live electrical circuits with the reflective surface of a plastic dental mirror.

  • Page 12: Handling Electrostatic Discharge-Sensitive Devices

    If any unsafe conditions are present, you must determine how serious the apparent hazard could be and whether you can continue without first correcting the problem. Consider these conditions and the safety hazards they present: v Electrical hazards, especially primary power (primary voltage on the frame can cause serious or fatal electrical shock).

  • Page 13: Grounding Requirements

    v Prevent the part from touching your clothing. Most clothing is insulative and retains a charge even when you are wearing a wrist strap. v Use the black side of a grounded work mat to provide a static-free work surface. The mat is especially useful when handling ESD-sensitive devices.
  • Page 14 v Connect to properly wired outlets any equipment that will be attached to this product. v When possible, use one hand only to connect or disconnect signal cables. v Never turn on any equipment when there is evidence of fire, water, or structural damage.
  • Page 15 CAUTION: When replacing the lithium battery, use only Part Number 45C1566 or an equivalent type battery recommended by the manufacturer. If your system has a module containing a lithium battery, replace it only with the same module type made by the same manufacturer. The battery contains lithium and can explode if not properly used, handled, or disposed of.
  • Page 16 CAUTION: The power control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.
  • Page 17 Chapter 2. Safety information...
  • Page 18 Hardware Maintenance Manual...
  • Page 19 ≥18 kg (37 lbs) ≥32 kg (70.5 lbs) ≥55 kg (121.2 lbs) Chapter 2. Safety information...
  • Page 20 PERIGO A corrente elétrica proveniente de cabos de alimentação, de telefone e de comunicações é perigosa. Para evitar risco de choque elétrico: v Não conecte nem desconecte nenhum cabo ou execute instalação, manutenção ou reconfiguração deste produto durante uma tempestade com raios. v Conecte todos os cabos de alimentação a tomadas elétricas corretamente instaladas e aterradas.
  • Page 21 CUIDADO: Ao substituir a bateria de lítio, utilize apenas uma bateria com Número de Peça 45C1566 ou um tipo de bateria equivalente recomendado pelo Se o seu sistema possui um módulo com uma bateria de lítio, substitua-o apenas por um módulo do mesmo tipo e do mesmo fabricante.
  • Page 22 CUIDADO: O botão de controle de alimentação do dispositivo e o botão para ligar/desligar da fonte de alimentação não desligam a corrente elétrica fornecida ao dispositivo. O dispositivo também pode ter mais de um cabo de alimentação. Para remover toda a corrente elétrica do dispositivo, assegure que todos os cabos de alimentação estejam desconectados da fonte de alimentação.
  • Page 23 Chapter 2. Safety information...
  • Page 24 Hardware Maintenance Manual...
  • Page 25 Chapter 2. Safety information...
  • Page 26 Hardware Maintenance Manual...
  • Page 27 DANGER Le courant électrique provenant de l’alimentation, du téléphone et des câbles de transmission peut présenter un danger. Pour éviter tout risque de choc électrique : v Ne manipulez aucun câble et n’effectuez aucune opération d’installation, d’entretien ou de reconfiguration de ce produit au cours d’un orage. v Branchez tous les cordons d’alimentation sur un socle de prise de courant correctement câblé...
  • Page 28 ATTENTION: Remplacer la pile au lithium usagée par une pile de référence identique exclusivement, (référence 45C1566), ou suivre les instructions du fabricant qui en définit les équivalences. Si votre système est doté d’un module contenant une pile au lithium, vous devez le remplacer uniquement par un module identique, produit par le même fabricant.
  • Page 29 ≥18 kg (37 lbs) ≥32 kg (70.5 lbs) ≥55 kg (121.2 lbs) ATTENTION: Soulevez la machine avec précaution. ATTENTION: L’interrupteur de contrôle d’alimentation de l’unité et l’interrupteur dubloc d’alimentation ne coupent pas le courant électrique alimentantl’unité. En outre, le système peut être équipé de plusieurs cordonsd’alimentation. Pour mettre l’unité...
  • Page 30 VORSICHT An Netz-, Telefon- und Datenleitungen können gefährliche Spannungen anliegen. Aus Sicherheitsgründen: v Bei Gewitter an diesem Gerät keine Kabel anschließen oder lösen. Ferner keine Installations-, Wartungs- oder Rekonfigurationsarbeiten durchführen. v Gerät nur an eine Schutzkontaktsteckdose mit ordnungsgemäß geerdetem Schutzkontakt anschließen. v Alle angeschlossenen Geräte ebenfalls an Schutzkontaktsteckdosen mit ordnungsgemäß...
  • Page 31 CAUTION: Eine verbrauchte Lithiumbatterie nur durch eine Batterie mit der Teilenummer 45C1566 oder eine gleichwertige, vom Hersteller empfohlene Batterie ersetzen. Enthält das System ein Modul mit einer Lithiumbatterie, dieses nur durch ein Modul desselben Typs und von demselben Hersteller ersetzen. Die Batterie enthält Lithium und kann bei unsachgemäßer Verwendung, Handhabung oder Entsorgung explodieren.
  • Page 32 ≥18 kg (37 lbs) ≥32 kg (70.5 lbs) ≥55 kg (121.2 lbs) ACHTUNG: Arbeitsschutzrichtlinien beim Anheben der Maschine beachten. ACHTUNG: Mit dem Netzschalter an der Einheit und am Netzteil wird die Stromversorgung für die Einheit nicht unterbrochen. Die Einheit kann auch mit mehreren Netzkabeln ausgestattet sein.
  • Page 33 Chapter 2. Safety information...
  • Page 34 Hardware Maintenance Manual...
  • Page 35 Chapter 2. Safety information...
  • Page 36 PERICOLO La corrente elettrica proveniente dai cavi di alimentazione, del telefono e di comunicazione può essere pericolosa. Per evitare il rischio di scosse elettriche: v Non collegare o scollegare qualsiasi cavo oppure effettuare l’installazione, la manutenzione o la riconfigurazione del prodotto durante un temporale. v Collegare tutti i fili elettrici a una presa di alimentazione correttamente cablata e dotata di messa a terra.
  • Page 37 ATTENZIONE: Quando si sostituisce la batteria al litio, utilizzare solo il Numero parte 45C1566 o un tipo di batteria equivalente consigliato dal produttore. Se sul sistema è presente un modulo che contiene una batteria al litio, sostituirlo solo con un tipo di modulo dello stesso tipo della stessa casa di produzione.
  • Page 38 ≥18 kg (37 lbs) ≥32 kg (70.5 lbs) ≥55 kg (121.2 lbs) ATTENZIONE: Prestare attenzione nel sollevare l’apparecchiatura. ATTENZIONE: Il pulsante di controllo dell’alimentazione presente sull’unità e l’interruttore dell’alimentatore non disattivano l’alimentazione corrente fornita all’unità. E’ possibile che l’unità disponga di più cavi di alimentazione. Per disattivare l’alimentazione dall’unità, accertarsi che tutti i cavi di alimentazione siano scollegati dalla fonte di alimentazione.
  • Page 39 Chapter 2. Safety information...
  • Page 40 Hardware Maintenance Manual...
  • Page 41 PELIGRO La corriente eléctrica procedente de cables de alimentación, teléfonos y cables de comunicación puede ser peligrosa. Para evitar el riesgo de descarga eléctrica: v No conecte ni desconecte los cables ni realice ninguna tarea de instalación, mantenimiento o reconfiguración de este producto durante una tormenta eléctrica.
  • Page 42 PRECAUCIÓN: Cuando sustituya una batería de litio, utilice solamente una batería número de pieza 45C1566 u otra de tipo equivalente recomendada por el fabricante. Si su sistema dispone de un módulo que contiene una batería de litio, reemplácelo sólo con el mismo tipo de módulo, del mismo fabricante. La batería contiene litio y puede explotar si no se utiliza, manipula o desecha correctamente.
  • Page 43 ≥18 kg (37 lbs) ≥32 kg (70.5 lbs) ≥55 kg (121.2 lbs) PRECAUCIÓN: Adopte procedimientos seguros al levantar el equipo. PRECAUCIÓN: El botón de control de alimentación del dispositivo y el interruptor de alimentación de la fuente de alimentación no desconectan la corriente eléctrica suministrada al dispositivo.
  • Page 44 Hardware Maintenance Manual...

  • Page 45: Chapter 3. General Information

    If the Adobe Reader has not been installed on your computer, a message will appear when you attempt to view the PDF file and you will be guided through the Adobe Reader installation. 2. The publications are available in other languages on the Lenovo Support Web site at: http://www.lenovo.com/support 3.

  • Page 46: Lenovo Welcome

    Windows 7 or Windows Vista from Lenovo. The Lenovo Welcome program introduces some innovative built-in features of Lenovo to you and guides you through some important setup tasks to help you make the most of your computer. Access Help...

  • Page 47: Specifications

    Specifications This section lists the physical specifications for your computer. Dimensions Width: 175 mm (6.9 inches) Height: 412 mm (16.2 inches) Depth: 442 mm (17.4 inches) Weight Maximum configuration as shipped: 11.0 kg (24.3 lbs) Environment Air temperature: Operating: 10° to 35°C (50° to 95°F) Non-operating: -40°...
  • Page 48 Hardware Maintenance Manual...

  • Page 49: Chapter 4. General Checkout

    If possible, have this information available when requesting assistance from Service Support and Engineering functions. v Machine type and model v Processor or hard disk upgrades v Failure symptom – Do diagnostics indicate a failure? © Copyright Lenovo 2009...
  • Page 50 – What, when, where, single, or multiple systems? – Is the failure repeatable? – Has this configuration ever worked? – If it has been working, what changes were made prior to it failing? – Is this the original reported failure? v Diagnostics version –...

  • Page 51: Chapter 5. Diagnostics

    2. If you are unable to isolate and repair the problem yourself after running the diagnostic programs, save and print the log files created by the diagnostic programs. You will need the log files when you speak to a Lenovo technical support representative.

  • Page 52: Pc-Doctor For Rescue And Recovery

    To run the Lenovo System Toolbox program, click Start → All Programs → Lenovo Services → Lenovo System Toolbox. Follow the instructions on the screen. For additional information about running the Lenovo System Toolbox program, refer to the Lenovo System Toolbox help system.

  • Page 53: Navigating Through The Diagnostics Programs

    To run the diagnostic program from a diagnostic disc that you created, do the following: 1. Make sure the optical drive you want to use is set as the first boot device in the startup device sequence. See “Selecting a startup device” on page 53. 2.
  • Page 54 Test results Diagnostics test results produce the following error code format: Function Failure Type DeviceID Date ChkDigits Text Code v Function Code: Represents the feature or function within the PC. v Failure Type: Represents the type of error encountered. v DeviceID: Contains the component’s unit-ID which corresponds to either a fixed disk drive, removable media drive, serial or parallel port, processor, specific RIMM, or a device on the PCI bus.

  • Page 55: Viewing The Test Log

    To select the Quick Erase or Full Erase Hard Drive utility, use the following procedure: 1. Select the UTILITY option on the toolbar and press Enter. 2. Select either the QUICK ERASE or FULL ERASE HARD DISK option and follow the instructions. Viewing the test log Errors reported by the diagnostic test will be displayed by the program as a failed test.
  • Page 56 Hardware Maintenance Manual...

  • Page 57: Chapter 6. Using The Setup Utility

    Have at least eight characters in length and contain at least one alphabetic character and one numeric character v Setup Utility program passwords are not case sensitive v Not be your name or your user name v Not be a common word or a common name © Copyright Lenovo 2009...

  • Page 58: Power-On Password

    v Be significantly different from your previous password Power-On Password When a Power-On Password is set, the user is prompted to type a valid password each time the computer is turned on. The computer cannot be used until a valid password is typed in.

  • Page 59: Selecting A Startup Device

    Note: If you do not want to save the settings, select Exit → Discard Changes and Exit. Selecting a startup device If your computer does not start up from a device such as the hard disk drive or the disc in the optical drive as expected, do one of the following to select the startup device you want.
  • Page 60 Hardware Maintenance Manual...

  • Page 61: Chapter 7. Symptom-To-Fru Index

    Power Cord v On/Off Switch connector v On/Off Switch Power Supply connector v System Board Power Supply connectors v Microprocessor(s) connection Check the power cord for continuity. Power Cord Check the power-on switch for continuity. Power-on Switch © Copyright Lenovo 2009...

  • Page 62: Diagnostic Error Codes

    Diagnostic error codes Refer to the following diagnostic error codes when using the diagnostic tests. See “Running tests” on page 47 for the specific type for information about the Diagnostic programs. In the following index, X can represent any number. Diagnostic error code FRU/Action 000-000-XXX...
  • Page 63 Diagnostic error code FRU/Action 000-039-XXX 1. Flash the system. See “Updating BIOS DMI data error (flashing) BIOS from a disc” on page 2. System board 000-195-XXX Information only BIOS Test aborted by user Re-start the test, if necessary 000-196-XXX 1. Press F3 to review the log file BIOS test halt, error threshold exceeded 2.
  • Page 64 Diagnostic error code FRU/Action 001-025-XXX 1. Flash the system. See “Updating System Checksum Value error (flashing) BIOS from a disc” on page 2. System board 001-026-XXX 1. Flash the system. See “Updating System FLASH data error (flashing) BIOS from a disc” on page 2.
  • Page 65 Diagnostic error code FRU/Action 001-198-XXX 1. If a component is called out, make sure System test aborted it is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 51 2. Flash the system and retest. See “Updating (flashing) BIOS from a disc” on page 170 3.
  • Page 66 Diagnostic error code FRU/Action 001-278-XXX 1. Device on IRQ11 System IRQ11 failure 2. System board 001-279-XXX 1. Device on IRQ12 System IRQ12 failure 2. System board 001-280-XXX 1. Device on IRQ13 System IRQ13 failure 2. System board 001-281-XXX 1. Hard disk drive cable System IRQ14 2.
  • Page 67 Diagnostic error code FRU/Action 005-024-XXX 1. Video card, if installed Video Addressing test failure 2. System board 005-025-XXX 1. Video card, if installed Video Checksum Value error 2. System board 005-027-XXX 1. Run Setup Video Configuration/Setup error 2. Video drivers update 3.
  • Page 68 Diagnostic error code FRU/Action 005-199-XXX 1. Go to “Undetermined problems” on page Video test failed, cause unknown 2. Flash the system and re-test. See “Updating (flashing) BIOS from a disc” on page 170 3. Replace component under function test 005-2XX-XXX 1.
  • Page 69 Diagnostic error code FRU/Action 011-002-XXX System board 011-003-XXX Serial port Timeout/Parity error 011-013-XXX System board 011-014-XXX Serial port Control Signal/Loopback test failure 011-015-XXX 1. Wrap plug Serial port External Loopback failure 2. System board 011-027-XXX 1. Run Setup, enable port Serial port Configuration/Setup error 2.
  • Page 70 Diagnostic error code FRU/Action 014-001-XXX 1. Remove external parallel device, if Parallel port Presence present 2. Run setup, enable port 3. System board 014-002-XXX System board 014-003-XXX Parallel port Timeout/Parity error 014-013-XXX System board 014-014-XXX Parallel port Control Signal/Loopback test failure 014-015-XXX 1.

  • Page 71: System Board System Board

    Diagnostic error code FRU/Action 015-000-XXX No action USB (Universal Serial Bus) port Interface Test Passed 015-001-XXX 1. Remove USB device(s) and re-test USB port Presence 2. System board 015-002-XXX 1. Remove USB device(s) and re-test USB port Timeout 2. System board 015-015-XXX 1.

  • Page 72: Flash The System And Re-Test. See

    Diagnostic error code FRU/Action 015-198-XXX 1. If a component is called out, make sure USB port test aborted it is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 51 2. Flash the system and re-test. See “Updating (flashing) BIOS from a disc”...

  • Page 73: System Board No Action

    Diagnostic error code FRU/Action 018-250-XXX 1. PCI card PCI Card Services error 2. Riser card, if installed 3. System board 020-000-XXX No action PCI Interface Test Passed 020-0XX-XXX 1. PCI card PCI Interface error 2. Riser card, if installed 3. System board 020-195-XXX Information only PCI Test aborted by user...
  • Page 74 Diagnostic error code FRU/Action 025-027-XXX 1. IDE signal cable IDE interface Configuration/Setup error 2. Flash the system. See “Updating (flashing) BIOS from a disc” on page 170 3. Reseat IDE signal cable 4. IDE device 5. System board 025-02X-XXX 1. IDE signal cable 025-03X-XXX 2.
  • Page 75 Diagnostic error code FRU/Action 030-027-XXX 1. SCSI signal cable SCSI interface Configuration/Setup error 2. Flash the system. See “Updating (flashing) BIOS from a disc” on page 170 3. SCSI device 4. SCSI adapter card, if installed 5. System board 030-03X-XXX 1.
  • Page 76 Diagnostic error code FRU/Action 035-196-XXX 1. Press F3 to review the log file RAID interface test halt, error threshold 2. Re-start the test to reset the log file exceeded 035-197-XXX 1. Make sure the component that is called RAID interface test warning out is connected and/or enabled.

  • Page 77: Information Only Re-Start The Test, If Necessary

    Diagnostic error code FRU/Action 071-197-XXX 1. Make sure the component that is called Audio port test warning out is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 51 2. Re-run test 3. Replace the component that is called out in warning statement 4.
  • Page 78 Diagnostic error code FRU/Action 080-198-XXX 1. If a component is called out, make sure Game Port interface test aborted it is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 51 2. Flash the system and re-test. See “Updating (flashing) BIOS from a disc”...
  • Page 79 Diagnostic error code FRU/Action 086-199-XXX 1. See “Undetermined problems” on page Mouse Port interface test failed, cause unknown 2. Flash the system and re-test. See “Updating (flashing) BIOS from a disc” on page 170 3. Replace component under function test 089-000-XXX No action Microprocessor Test Passed...
  • Page 80 Diagnostic error code FRU/Action 170-197-XXX 1. Make sure the component that is called Voltage Sensor(s) test warning out is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 51 2. Re-run test 3. Replace the component that is called out in warning statement 4.
  • Page 81 Diagnostic error code FRU/Action 175-198-XXX 1. If a component is called out, make sure Thermal Sensor(s) test aborted it is connected and/or enabled 2. Flash the system and re-test. See “Updating (flashing) BIOS from a disc” on page 170 3. Go to “Undetermined problems” on page 175-199-XXX 1.
  • Page 82 Diagnostic error code FRU/Action 215-XXX-XXX 1. CD-ROM Drive Cable CD-ROM Drive error 2. Check power supply voltages 3. CD-ROM drive 4. System board 217-000-XXX No action Hard Disk Drive Test Passed 217-25X-XXX 1. Hard Disk Drive Cable 217-26X-XXX 2. Check power supply voltages Hard Disk Drive (IDE) error 3.

  • Page 83: Beep Symptoms

    Diagnostic error code FRU/Action 415-XXX-XXX Remove the Modem and re-test the system Modem error Beep symptoms Beep symptoms are tones or a series of tones separated by pauses (intervals without sound) during POST. The following tables describes beep symptoms. Beep symptom FRU/Action Perform the following actions in order.

  • Page 84: Post Error Codes

    POST error codes Each time you power-on the system, it performs a series of tests that check the operation of the system and some options. This series of tests is called the Power-On Self-Test, or POST. POST does the following operations. v Checks some basic system-board operations v Checks the memory operation v Starts the video operation...
  • Page 85 POST error message Description/Action Press TAB to show POST screen Pressing the TAB key permits the user to toggle between the default POST display screen and a custom POST display screen. Error: Non-System disk or disk error The BIOS was unable to find a suitable boot Replace and press any key when ready device.

  • Page 86: Miscellaneous Error Messages

    Miscellaneous error messages Message/Symptom FRU/Action Changing display colors Display/Monitor Computer will not power-off. See “Power 1. Power Switch supply problems” on page 55. 2. System Board 3. Riser card, if installed Computer will not RPL from server 1. Ensure that network is in startup sequence as first device or first device after diskette 2.

  • Page 87: Undetermined Problems

    Message/Symptom FRU/Action Non-system disk or disk error-type message 1. Diskette Drive with a known-good diagnostic diskette. 2. System Board 3. Diskette Drive Cable Other display symptoms not listed above 1. Display (including blank or illegible display) 2. System Board Power-on indicator or hard disk drive in-use 1.
  • Page 88 c. Memory modules d. Extended video memory e. External Cache f. External Cache RAM g. Hard disk drive h. Diskette drive 3. Power-on the computer to re-test the system. 4. Repeat steps 1 through 3 until you find the failing device or adapter. If all devices and adapters have been removed and the problem continues, replace the system board.

  • Page 89: Chapter 8. Replacing Frus

    Locating connectors on the front of your computer Figure 1 shows the locations of the connectors on the front of your computer. Figure 1. Front connector locations 1 USB connector 3 Microphone connector 2 Headphone connector 4 USB connector © Copyright Lenovo 2009...

  • Page 90: Locating Connectors On The Rear Of Your Computer

    Locating connectors on the rear of your computer Figure 2 shows the locations of the connectors on the rear of your computer. Some connectors on the rear of your computer are color-coded to help you determine where to connect the cables on your computer. Figure 2.

  • Page 91: Removing The Computer Cover

    “Important safety information” in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to: http://www.lenovo.com/support This section provides instructions on how to remove the computer cover.
  • Page 92 6. Press the cover-release button on the side of the computer cover and slide the computer cover to the rear to remove. Figure 3. Removing the computer cover Hardware Maintenance Manual...

  • Page 93: Locating Components

    Locating components Figure 4 shows the locations of the various components in your computer. To remove the computer cover, see “Removing the computer cover” on page 85. Figure 4. Component locations 1 Heat sink and fan assembly 6 PCI card slot 2 Memory modules 7 PCI Express x1 card slots 3 Battery...

  • Page 94: Locating Parts On The System Board

    “Important safety information” in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to: http://www.lenovo.com/support This section provides instructions on how to remove and reinstall the front bezel.

  • Page 95: Installing Or Replacing A Memory Module

    “Important safety information” in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to: http://www.lenovo.com/support This section provides instructions on how to install or replace a memory module.
  • Page 96 3. Locate the memory slots. See “Locating parts on the system board” on page 88. 4. Open the retaining clips. Figure 7. Opening the retaining clips If you are replacing an old memory module, open the retaining clips and remove the memory module being replaced as shown. Figure 8.

  • Page 97: Installing Or Replacing A Pci Card

    “Important safety information” in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to: http://www.lenovo.com/support This section provides instructions on how to install or replace a PCI card.
  • Page 98 3. Remove the new PCI card from its static-protective package. 4. Install the new card into the appropriate card slot on the system board. See “Locating parts on the system board” on page 88. If you are replacing a PCI card, remove the old card currently installed before installing the new one.

  • Page 99: Replacing The Battery

    “Important safety information” in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to: http://www.lenovo.com/support Your computer has a special type of memory that maintains the date, time, and settings for built-in features, such as parallel-port assignments (configuration).

  • Page 100: Replacing The Power Supply Assembly

    “Important safety information” in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to: http://www.lenovo.com/support This section provides instructions on how to replace the power supply assembly.
  • Page 101 7. Install the four screws to secure the power supply assembly. Note: Use only screws provided by Lenovo. 8. Reconnect the power supply assembly connectors to the system board.

  • Page 102: Replacing The Heat Sink And Fan Assembly

    “Important safety information” in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to: http://www.lenovo.com/support This section provides instructions on how to replace the heat sink and fan assembly.
  • Page 103 5. Remove the four screws 1 that secure the heat sink and fan assembly to the system board. Note: Carefully remove the four screws from the system board to avoid any possible damage. The four screws cannot be removed from the heat sink and fan assembly.

  • Page 104: Replacing The Microprocessor

    “Important safety information” in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to: http://www.lenovo.com/support This section provides instructions on how to replace the microprocessor. CAUTION: The heat sink and microprocessor might be very hot.
  • Page 105 7. Lift the small handle 1 to release the microprocessor 2 secured on the system board. 8. Lift the microprocessor straight up and out of the socket. Notes: a. Your microprocessor and socket might look different from the one illustrated. b.

  • Page 106: Replacing The System Board

    “Important safety information” in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to: http://www.lenovo.com/support This section provides instructions on how to replace the system board.
  • Page 107 Note: When replacing the system board, you must order a new retention module for the new system board. Make sure you have a retention module for the new system board before continuing this procedure. To replace the system board, do the following: 1.

  • Page 108: Replacing The Primary Hard Disk Drive

    “Important safety information” in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to: http://www.lenovo.com/support This section provides instructions on how to replace the primary hard disk drive.
  • Page 109 8. To install a new hard disk drive into the blue bracket, flex the bracket and align pin 1 , pin 2 , pin 3 , and pin 4 on the bracket with the holes in the hard disk drive. Do not touch the circuit board 5 on the bottom of the hard disk drive.

  • Page 110: Replacing The Secondary Hard Disk Drive

    “Important safety information” in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to: http://www.lenovo.com/support Note: Depending on your model type, your computer might come with a secondary hard disk drive bay for installing or replacing a secondary hard disk drive.
  • Page 111 4. Press the blue release button to release the hard disk drive cage from the chassis. Figure 21. Removing the secondary hard disk drive 5. Remove the hard disk drive cage from the chassis by simply sliding it outward. 6. Pull on the blue handle to release and remove the hard disk drive from the hard disk drive cage.
  • Page 112 8. To install a new hard disk drive into the blue bracket, flex the bracket and align pin 1 , pin 2 , pin 3 , and pin 4 on the bracket with the holes in the hard disk drive. Do not touch the circuit board 5 on the bottom of the hard disk drive.

  • Page 113: Replacing The Optical Drive

    “Important safety information” in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to: http://www.lenovo.com/support This section provides instructions on how to replace the optical drive.

  • Page 114: Replacing The Card Reader

    “Important safety information” in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to: http://www.lenovo.com/support Depending on your model type, your computer might have a card reader installed.

  • Page 115: Replacing The Front Fan Assembly

    “Important safety information” in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to: http://www.lenovo.com/support This section provides instructions on how to replace the front fan assembly.
  • Page 116 To replace the front fan assembly, do the following: 1. Turn off the computer and disconnect all power cords from electrical outlets. 2. Remove the computer cover. See “Removing the computer cover” on page 85. 3. Remove the front bezel. See “Removing and reinstalling the front bezel” on page 88.

  • Page 117: Replacing The Rear Fan Assembly

    “Important safety information” in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to: http://www.lenovo.com/support This section provides instructions on how to replace the rear fan assembly.
  • Page 118 4. The rear fan assembly is attached to the chassis by four rubber mounts. Remove the rear fan assembly by breaking or cutting the rubber mounts and gently pulling the rear fan assembly out of the chassis. Figure 30. Removing the rear fan assembly 5.

  • Page 119: Replacing The Internal Speaker

    “Important safety information” in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to: http://www.lenovo.com/support This section provides instructions on how to replace the internal speaker.
  • Page 120 4. Push the metal tab on the top of the internal speaker outward and slide the internal speaker upward to completely remove it from the chassis. Figure 32. Removing the old internal speaker Hardware Maintenance Manual...

  • Page 121: Replacing The Front Audio And Usb Assembly

    “Important safety information” in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to: http://www.lenovo.com/support This section provides instructions on how to replace the front audio and USB assembly.

  • Page 122: Completing The Fru Replacement

    4. Note the front audio and USB assembly cables routing and remove the screw that secures the front audio and USB assembly to the chassis. Figure 34. Removing the front audio and USB assembly 5. Remove the front audio and USB assembly. 6.
  • Page 123 To reinstall the computer cover and reconnect cables to your computer: 1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left inside your computer. See “Locating components” on page 87 for the location of the various components. 2.
  • Page 124 Hardware Maintenance Manual...

  • Page 125: Chapter 9. Fru Lists

    System board, AMD RS760 mATX GA - optional (Only for Brazil) (models) 71Y3278 ™ Microprocessor, AMD Athlon X2 B22 (2.80GHz, 2M Total Cache, AM3, 65W) 71Y5429 (models) Microprocessor, Athlon X2 B24 (3.00GHz, 2M Total Cache, AM3, 65W) (models) 71Y5431 © Copyright Lenovo 2009...
  • Page 126 Item# 4013 FRUs FRU# Microprocessor, Athlon II X2 215 (2.7GHz, 1M Total Cache, AM3, 65W) (models) 71Y6937 Microprocessor, Athlon X2 240 (2.80GHz, 2M Total Cache, AM3, 65W) (models) 64Y8012 Microprocessor, Athlon X2 245 (2.90GHz, 2M Total Cache, AM3, 65W) (models) 64Y8013 Microprocessor, Athlon X2 250 (3.00GHz, 2M Total Cache, AM3, 65W) (models) 64Y8014...
  • Page 127 Item# 4013 FRUs FRU# Memory module, 1GB PC3-8500 1066MHz DDR3 UDIMM (models) 46R3322 Memory module, 2GB PC3-8500 1066MHz DDR3 UDIMM (models) 46R3323 Memory module, 1GB PC3-10600 1333MHz DDR3 UDIMM (models) 64Y6648 Memory module, 2GB PC3-10600 1333MHz DDR3 UDIMM (models) 64Y6649 Optical drive, DVD-ROM Drive - 16x/48x - SATA (models) 41N3325 Optical drive, DVD-ROM Drive - 16x/48x - SATA (models)
  • Page 128 PS/2 Full--Korean (models) 41A5060 PS/2 Full--LA Spanish (models) 41A5061 PS/2 Full--Spanish (models) 41A5069 PS/2 Full--Thailand (models) 41A5072 4013 Keyboards (Lenovo Preferred Pro USB -- without hub) FRU# USB Full--US English (models) 41A5289 USB Full--Brazilian Portuguese (models) 41A5294 USB Full--Chinese/US (models) 41A5296...
  • Page 129 Soft Modem V.90/V.44 ATX (models) 46R4220 IEEE 1394 Firewire Adapter ATX (models) 41D2781 Multi-Slots RTS5111F Card Reader with crust (models) 45R8139 Lenovo branded speakers (models) 41A5334 4013 Power Cords (Primary) FRU# Power cord - US (models) 41R3184 Power cord - Brazil (models)
  • Page 130 4013 Windows XP Professional Recovery DVDs FRU# Brazilian Portuguese (models) 71Y8152 Traditional Chinese (models) 71Y8153 French (models) 71Y8154 Hong Kong - TC (models) 71Y8155 Spanish (models) 71Y8156 4013 Vista Home Basic 32 Recovery DVDs FRU# US English (models) 71Y8185 India English (models) 71Y8184 4013 Vista Business 32 Recovery DVDs FRU#...
  • Page 131 4013 Windows 7 Starter 32 Recovery DVDs FRU# Brazilian Portuguese (models) 71Y8236 US English (models) 71Y8239 India English (models) 71Y8237 Spanish (models) 71Y8238 4013 Windows 7 Professional 64 Recovery DVDs FRU# Brazilian Portuguese (models) 71Y8240 Taiwan - TC (models) 71Y8241 Hong Kong - TC (models) 71Y8244 US English (models)

  • Page 132: Machine Type 4478

    Machine Type 4478 Item# 4478 FRUs FRU# AMD 65W heat sink (without fan grille) (models) 43N9711 AMD 89W heat sink (without fan grille) (models) 43N9886 System board, AMD RS760 mATX GA (models) 64Y7161 System board, AMD RS760 mATX GA - optional (Only for Brazil) (models) 71Y3278 Microprocessor, Athlon X2 B22 (2.80GHz, 2M Total Cache, AM3, 65W) (models) 71Y5429...
  • Page 133 Item# 4478 FRUs FRU# Microprocessor, Athlon X4 620 (2.60GHz, 2M Total Cache, AM3, 95W) (models) 64Y8023 Microprocessor, Athlon X4 630 (2.80GHz, 2M Total Cache, AM3, 95W) (models) 64Y8024 Microprocessor, Phenom II X2 545 (3.00GHz, 7M Total Cache, AM3, 80W) (models) 64Y8025 Microprocessor, Phenom II X2 550 (3.10GHz, 7M Total Cache, AM3, 80W) (models) 64Y8026...
  • Page 134 Top handle assembly (all models) 43N9667 L1 - Models with no FDD/ Card reader (all models) 43N9664 Rear I/O shield, ATX (all models) 45K6268 4478 Keyboards (Lenovo Preferred Pro PS/2 Full Size) FRU# PS/2 Full--US English (models) 41A5039 PS/2 Full--US Euro (models) 41A5076...
  • Page 135 PS/2 Full--Korean (models) 41A5060 PS/2 Full--LA Spanish (models) 41A5061 PS/2 Full--Spanish (models) 41A5069 PS/2 Full--Thailand (models) 41A5072 4478 Keyboards (Lenovo Preferred Pro USB -- without hub) FRU# USB Full--US English (models) 41A5289 USB Full--Brazilian Portuguese (models) 41A5294 USB Full--Chinese/US (models) 41A5296...
  • Page 136 4478 Adapters and miscellaneous FRUs FRU# Multi-Slots RTS5111F Card Reader with crust (models) 45R8139 Lenovo branded speakers (models) 41A5334 4478 Power Cords (Primary) FRU# Power cord - US (models) 41R3184 Power cord - Brazil (models) 41R3270 Power cord - LA High Volt (APU) (models)
  • Page 137 4478 Vista Business 32 Recovery DVDs FRU# India English (models) 71Y8171 French (models) 71Y8170 Spanish (models) 71Y8172 4478 Windows 7 Professional 32 Recovery DVDs FRU# Brazilian Portuguese (models) 71Y8216 Taiwan - TC (models) 71Y8217 Hong Kong - TC (models) 71Y8220 US English (models) 71Y8223 India English (models)
  • Page 138 4478 Windows 7 Professional 64 Recovery DVDs FRU# India English (models) 71Y8242 French (models) 71Y8243 Spanish (models) 71Y8245 Hardware Maintenance Manual...

  • Page 139: Machine Type 5043

    Machine Type 5043 Item# 5043 FRUs FRU# AMD 65W heat sink (without fan grille) (models) 43N9711 AMD 89W heat sink (without fan grille) (models) 43N9886 System board, AMD RS760 mATX GA (models A1U A1F A1S A1P A1Y A2U A2F 64Y7161 A2S A2P A2Y A3U A3F A3S A3P A3Y A4U A4F A4S A4P A4Y A5U A5F A5S A5P A5Y A6U A6F A6S A6P A6Y) System board, AMD RS760 mATX GA - optional (Only for Brazil) (models)
  • Page 140 Item# 5043 FRUs FRU# Microprocessor, Athlon X3 425 (2.70GHz, 1.5M Total Cache, AM3, 95W) (models 64Y8019 A1U A1F A1S A1P A1Y) Microprocessor, Athlon X3 435 (2.90GHz, 1.5M Total Cache, AM3, 95W) (models) 64Y8020 Microprocessor, Athlon X4 600e (2.20GHz, 2M Total Cache, AM3, 45W) (models) 64Y8021 Microprocessor, Athlon X4 605e (2.30GHz, 2M Total Cache, AM3, 45W) (models) 64Y8022...
  • Page 141 Item# 5043 FRUs FRU# Optical drive, DVD Recordable Rambo 8 - SATA 12XRAM WRITE (models A1U 43C1042 A1F A1S A1P A1Y A2U A2F A2S A2P A2Y A3U A3F A3S A3P A3Y A4U A4F A4S A4P A4Y A5U A5F A5S A5P A5Y A6U A6F A6S A6P A6Y) Optical drive, DVD Recordable Rambo 8 - SATA 12XRAM WRITE (models A1U 71Y5545 A1F A1S A1P A1Y A2U A2F A2S A2P A2Y A3U A3F A3S A3P A3Y A4U A4F A4S...
  • Page 142 41A5061 PS/2 Full--Spanish (models) 41A5069 PS/2 Full--Thailand (models) 41A5072 5043 Keyboards (Lenovo Preferred Pro USB -- without hub) FRU# USB Full--US English (models A1U A2U A3U A4U A5U A6U) 41A5289 USB Full--Brazilian Portuguese (models A1P A2P A3P A4P A5P A6P)
  • Page 143 5043 Keyboards (Lenovo Fingerprint Reader USB) FRU# Thailand (models) 41R0073 5043 Mice FRU# Optical Wheel Mouse (400DPI, USB) (models A1U A1F A1S A1P A1Y A2U A2F A2S A2P 41U3013 A2Y A3U A3F A3S A3P A3Y A4U A4F A4S A4P A4Y A5U A5F A5S A5P A5Y A6U A6F...
  • Page 144 5043 Power Cords Power Cords (Secondary) FRU# Power Cord - Japanese and Japanese English (models) 41R3249 Power cord - Australia/ New Zealand (models) 41R3197 Power cord - Hong Kong (models) 41R3225 Power cord - Y cable for Brazil (models) 43N9044 5043 Windows XP Professional Recovery DVDs FRU# US English (models)
  • Page 145 5043 Windows 7 Home Premium 32 Recovery DVDs FRU# Taiwan - TC (models) 71Y8229 Hong Kong - TC (models) 71Y8232 US English (models) 71Y8235 India English (models) 71Y8230 French (models) 71Y8231 Spanish (models) 71Y8234 Korean (models) 71Y8233 5043 Windows 7 Starter 32 Recovery DVDs FRU# Brazilian Portuguese (models) 71Y8236...

  • Page 146: Machine Type 5237

    Machine Type 5237 Item# 5237 FRUs FRU# AMD 65W heat sink (without fan grille) (models) 43N9711 AMD 89W heat sink (without fan grille) (models) 43N9886 System board, AMD RS760 mATX GA (models) 64Y7161 System board, AMD RS760 mATX GA - optional (Only for Brazil) (models) 71Y3278 Microprocessor, Athlon X2 B22 (2.80GHz, 2M Total Cache, AM3, 65W) (models) 71Y5429...
  • Page 147 Item# 5237 FRUs FRU# Microprocessor, Athlon X4 620 (2.60GHz, 2M Total Cache, AM3, 95W) (models) 64Y8023 Microprocessor, Athlon X4 630 (2.80GHz, 2M Total Cache, AM3, 95W) (models) 64Y8024 Microprocessor, Phenom II X2 545 (3.00GHz, 7M Total Cache, AM3, 80W) (models) 64Y8025 Microprocessor, Phenom II X2 550 (3.10GHz, 7M Total Cache, AM3, 80W) (models) 64Y8026...
  • Page 148 Top handle assembly (all models) 43N9667 L1 - Models with no FDD/ Card reader (all models) 43N9664 Rear I/O shield, ATX (all models) 45K6268 5237 Keyboards (Lenovo Preferred Pro PS/2 Full Size) FRU# PS/2 Full--US English (models) 41A5039 PS/2 Full--US Euro (models) 41A5076...
  • Page 149 PS/2 Full--Korean (models) 41A5060 PS/2 Full--LA Spanish (models) 41A5061 PS/2 Full--Spanish (models) 41A5069 PS/2 Full--Thailand (models) 41A5072 5237 Keyboards (Lenovo Preferred Pro USB -- without hub) FRU# USB Full--US English (models) 41A5289 USB Full--Brazilian Portuguese (models) 41A5294 USB Full--Chinese/US (models) 41A5296...
  • Page 150 5237 Adapters and miscellaneous FRUs FRU# Multi-Slots RTS5111F Card Reader with crust (models) 45R8139 Lenovo branded speakers (models) 41A5334 5237 Power Cords (Primary) FRU# Power cord - US (models) 41R3184 Power cord - Brazil (models) 41R3270 Power cord - LA High Volt (APU) (models)
  • Page 151 5237 Vista Business 32 Recovery DVDs FRU# India English (models) 71Y8171 French (models) 71Y8170 Spanish (models) 71Y8172 5237 Windows 7 Professional 32 Recovery DVDs FRU# Brazilian Portuguese (models) 71Y8216 Taiwan - TC (models) 71Y8217 Hong Kong - TC (models) 71Y8220 US English (models) 71Y8223 India English (models)
  • Page 152 5237 Windows 7 Professional 64 Recovery DVDs FRU# India English (models) 71Y8242 French (models) 71Y8243 Spanish (models) 71Y8245 Hardware Maintenance Manual...

  • Page 153: Machine Type 5393

    Machine Type 5393 Item# 5393 FRUs FRU# AMD 65W heat sink (without fan grille) (models) 43N9711 AMD 89W heat sink (without fan grille) (models) 43N9886 System board, AMD RS760 mATX GA (models) 64Y7161 System board, AMD RS760 mATX GA - optional (Only for Brazil) (models) 71Y3278 Microprocessor, Athlon X2 B22 (2.80GHz, 2M Total Cache, AM3, 65W) (models) 71Y5429...
  • Page 154 Item# 5393 FRUs FRU# Microprocessor, Athlon X4 620 (2.60GHz, 2M Total Cache, AM3, 95W) (models) 64Y8023 Microprocessor, Athlon X4 630 (2.80GHz, 2M Total Cache, AM3, 95W) (models) 64Y8024 Microprocessor, Phenom II X2 545 (3.00GHz, 7M Total Cache, AM3, 80W) (models) 64Y8025 Microprocessor, Phenom II X2 550 (3.10GHz, 7M Total Cache, AM3, 80W) (models) 64Y8026...
  • Page 155 Top handle assembly (all models) 43N9667 L1 - Models with no FDD/ Card reader (all models) 43N9664 Rear I/O shield, ATX (all models) 45K6268 5393 Keyboards (Lenovo Preferred Pro PS/2 Full Size) FRU# PS/2 Full--US English (models) 41A5039 PS/2 Full--US Euro (models) 41A5076...
  • Page 156 PS/2 Full--Korean (models) 41A5060 PS/2 Full--LA Spanish (models) 41A5061 PS/2 Full--Spanish (models) 41A5069 PS/2 Full--Thailand (models) 41A5072 5393 Keyboards (Lenovo Preferred Pro USB -- without hub) FRU# USB Full--US English (models) 41A5289 USB Full--Brazilian Portuguese (models) 41A5294 USB Full--Chinese/US (models) 41A5296...
  • Page 157 5393 Adapters and miscellaneous FRUs FRU# Multi-Slots RTS5111F Card Reader with crust (models) 45R8139 Lenovo branded speakers (models) 41A5334 5393 Power Cords (Primary) FRU# Power cord - US (models) 41R3184 Power cord - Brazil (models) 41R3270 Power cord - LA High Volt (APU) (models)
  • Page 158 5393 Vista Business 32 Recovery DVDs FRU# India English (models) 71Y8171 French (models) 71Y8170 Spanish (models) 71Y8172 5393 Windows 7 Professional 32 Recovery DVDs FRU# Brazilian Portuguese (models) 71Y8216 Taiwan - TC (models) 71Y8217 Hong Kong - TC (models) 71Y8220 US English (models) 71Y8223 India English (models)
  • Page 159 5393 Windows 7 Professional 64 Recovery DVDs FRU# India English (models) 71Y8242 French (models) 71Y8243 Spanish (models) 71Y8245 Chapter 9. FRU lists...

  • Page 160: Machine Type 5526

    Machine Type 5526 Item# 5526 FRUs FRU# AMD 65W heat sink (without fan grille) (models) 43N9711 AMD 89W heat sink (without fan grille) (models) 43N9886 System board, AMD RS760 mATX GA (models) 64Y7161 System board, AMD RS760 mATX GA - optional (Only for Brazil) (models) 71Y3278 Microprocessor, Athlon X2 B22 (2.80GHz, 2M Total Cache, AM3, 65W) (models) 71Y5429...
  • Page 161 Item# 5526 FRUs FRU# Microprocessor, Athlon X4 620 (2.60GHz, 2M Total Cache, AM3, 95W) (models) 64Y8023 Microprocessor, Athlon X4 630 (2.80GHz, 2M Total Cache, AM3, 95W) (models) 64Y8024 Microprocessor, Phenom II X2 545 (3.00GHz, 7M Total Cache, AM3, 80W) (models) 64Y8025 Microprocessor, Phenom II X2 550 (3.10GHz, 7M Total Cache, AM3, 80W) (models) 64Y8026...
  • Page 162 Top handle assembly (all models) 43N9667 L1 - Models with no FDD/ Card reader (all models) 43N9664 Rear I/O shield, ATX (all models) 45K6268 5526 Keyboards (Lenovo Preferred Pro PS/2 Full Size) FRU# PS/2 Full--US English (models) 41A5039 PS/2 Full--US Euro (models) 41A5076...
  • Page 163 PS/2 Full--Korean (models) 41A5060 PS/2 Full--LA Spanish (models) 41A5061 PS/2 Full--Spanish (models) 41A5069 PS/2 Full--Thailand (models) 41A5072 5526 Keyboards (Lenovo Preferred Pro USB -- without hub) FRU# USB Full--US English (models) 41A5289 USB Full--Brazilian Portuguese (models) 41A5294 USB Full--Chinese/US (models) 41A5296...
  • Page 164 5526 Adapters and miscellaneous FRUs FRU# Multi-Slots RTS5111F Card Reader with crust (models) 45R8139 Lenovo branded speakers (models) 41A5334 5526 Power Cords (Primary) FRU# Power cord - US (models) 41R3184 Power cord - Brazil (models) 41R3270 Power cord - LA High Volt (APU) (models)
  • Page 165 5526 Vista Business 32 Recovery DVDs FRU# India English (models) 71Y8171 French (models) 71Y8170 Spanish (models) 71Y8172 5526 Windows 7 Professional 32 Recovery DVDs FRU# Brazilian Portuguese (models) 71Y8216 Taiwan - TC (models) 71Y8217 Hong Kong - TC (models) 71Y8220 US English (models) 71Y8223 India English (models)
  • Page 166 5526 Windows 7 Professional 64 Recovery DVDs FRU# India English (models) 71Y8242 French (models) 71Y8243 Spanish (models) 71Y8245 Hardware Maintenance Manual...

  • Page 167: Machine Type 6674

    Machine Type 6674 Item# 6674 FRUs FRU# AMD 65W heat sink (without fan grille) (models) 43N9711 AMD 89W heat sink (without fan grille) (models) 43N9886 System board, AMD RS760 mATX GA (models A4U A4F A4S A4P A4Y A5U A5F 64Y7161 A5S A5P A5Y A6U A6F A6S A6P A6Y A7U A7F A7S A7P A7Y A8U A8F A9A A9Q AAV ABU ABF A1U A1F A1S A1P A1Y A2U A2F A2S A2P A2Y A3U A3F A3S A3P A3Y)
  • Page 168 Item# 6674 FRUs FRU# Microprocessor, Athlon X3 425 (2.70GHz, 1.5M Total Cache, AM3, 95W) (models 64Y8019 A4U A4F A4S A4P A4Y) Microprocessor, Athlon X3 435 (2.90GHz, 1.5M Total Cache, AM3, 95W) (models) 64Y8020 Microprocessor, Athlon X4 600e (2.20GHz, 2M Total Cache, AM3, 45W) (models) 64Y8021 Microprocessor, Athlon X4 605e (2.30GHz, 2M Total Cache, AM3, 45W) (models) 64Y8022...
  • Page 169 Item# 6674 FRUs FRU# Optical drive, DVD-ROM Drive - 16x/48x - SATA (models A6U A6F A6S A6P 41N3325 A6Y) Optical drive, DVD-ROM Drive - 16x/48x - SATA (models A6U A6F A6S A6P 71Y5543 A6Y) Optical drive, DVD Recordable Rambo 8 - SATA 12XRAM WRITE (models A4U 43C1042 A4F A4S A4P A4Y A5U A5F A5S A5P A5Y A7U A7F A7S A7P A7Y A8U A8F A9A A9Q AAV ABU ABF A1U A1F A1S A1P A1Y A2U A2F A2S A2P A2Y A3U A3F...
  • Page 170 PS/2 Full--Spanish (models) 41A5069 PS/2 Full--Thailand (models) 41A5072 6674 Keyboards (Lenovo Preferred Pro USB -- without hub) FRU# USB Full--US English (models A4U A5U A6U A7U A8U A9A A9Q ABU A1U A2U A3U) 41A5289 USB Full--Brazilian Portuguese (models A4P A5P A6P A7P A1P A2P A3P)
  • Page 171 6674 Keyboards (Lenovo Fingerprint Reader USB) FRU# Brazilian Portuguese (models) 41R0043 Chinese/US (models) 41R0045 French Canadian (models) 41R0050 French Canadian (models) 41R0051 Korean (models) 41R0060 LA Spanish (models) 41R0061 Thailand (models) 41R0073 6674 Mice FRU# Optical Wheel Mouse (400DPI, USB) (models A4U A4F A4S A4P A4Y A5U A5F A5S A5P...
  • Page 172 6674 Power Cords Power Cords (Secondary) FRU# Power cord - China (models) 41R3257 Power cord - Brazil (models) 41R3271 Power cord - LA High Volt (APU) (models) 41R3177 Power cord - Korea (models) 41R3261 Power cord - Taiwan (models AAV) 41R3279 Power cord - South Africa (models A9A) 41R3221...
  • Page 173 6674 Windows 7 Home Basic 32 Recovery DVDs FRU# Brazilian Portuguese (models) 71Y8224 US English (models) 71Y8227 India English (models) 71Y8225 Spanish (models) 71Y8226 6674 Windows 7 Home Premium 32 Recovery DVDs FRU# Brazilian Portuguese (models) 71Y8228 Taiwan - TC (models) 71Y8229 Hong Kong - TC (models) 71Y8232...
  • Page 174 Hardware Maintenance Manual...

  • Page 175: Chapter 10. Additional Service Information

    – Start the Setup Utility. – Select System Information on the Main setup screen. v Sources for obtaining the latest level BIOS available 1. Lenovo support web site: http://www.lenovo.com/support/ 2. Lenovo Customer Support Center 3. Levels 1 and 2 Support To update (flash) the BIOS, see “Updating (flashing) BIOS from a disc”...

  • Page 176: Updating (Flashing) Bios From A Disc

    5. Follow the instructions on the screen to complete the update. Updating (flashing) BIOS from your operating system Note: Because Lenovo makes constant improvements to the Web site, the Web page contents are subject to change without notice, including the contents referenced in the following procedure.

  • Page 177: Power Management

    1. Turn off the computer and any attached devices, such as printers, monitors, and external drives. 2. Unplug all power cords from electrical outlets, and remove the computer cover. See “Removing the computer cover” on page 85. 3. Access the system board. 4.
  • Page 178 Wake on LAN to Enabled, the computer will turn on when it receives a specific signal from another computer on the local area network (LAN). Hardware Maintenance Manual...

  • Page 179: Appendix. Notices

    Web sites. The materials at those Web sites are not part of the materials for this Lenovo product, and use of those Web sites is at your own risk.

  • Page 180: Television Output Notice

    Macrovision Corporation. Reverse engineering or disassembly is prohibited. Trademarks The following terms are trademarks or service marks of Lenovo in the United States, other countries, or both: Lenovo The Lenovo logo...

  • Page 181: Index

    89 PCI card 91 internal speaker, replacing 113 card latch 91 card reader, replacing 108 changing Lenovo System Toolbox 45 startup device sequence 53 Lenovo ThinkVantage Toolbox 45 components, internal 87 Lenovo ThinkVantage Tools 39 computer cover locating components 87...
  • Page 182 replacing battery 93 front audio and USB assembly 115 hard disk drive 102 heat sink and fan assembly 96 internal speaker 113 system board 100 RoHS 2 safety information 3 safety inspection guide 5 safety notices 7 security enabling or disabling 52 selecting startup device 53 temporary startup device 53...
  • Page 184 Part Number: 71Y5807 Printed in USA (1P) P/N: 71Y5807...

This manual is also suitable for:

Thinkcentre 3317Thinkcentre 4013Thinkcentre 4478Thinkcentre 5043Thinkcentre 5237Thinkcentre 5393 ... Show all

Table of Contents