Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for AEG FAVORIT 54730
Summary of Contents for AEG FAVORIT 54730
- Page 1 FAVORIT 54730 Dishwasher Operating instructions...
- Page 2 Dear customer Please read these user instructions carefully. Above all please observe the safety instructions on the first few pages of these user instructions! Please keep these user instructions for later reference. Pass them on to any subsequent owner of the appliance. The warning triangle and/or specific words (Warning!, Caution!, Important!) are used to highlight instructions that are important for your safety or for the function of the appliance.
-
Page 3: Table Of Contents
Disposing of your old machine Economical and ecological dishwashing Description of the appliance The inside of the appliance Control panel Before using your dishwasher for the first time Setting the water hardness range Filling with special salt The rinse aid Loading cutlery and dishes... -
Page 4: Safety Instructions
For safety reasons, you should not convert or modify your dishwasher in any way. Before using your dishwasher for the first time Check your dishwasher for any transport damage. -
Page 5: Disposing Of Packaging And Old Machines
Always turn off the water tap when your dishwasher is left unattended for any length of time, e.g. when you are away on holiday. Only transport the dishwasher in an upright position. Tipping it upside down during transport could cause salty water to leak into the internal compartment and lead to the formation of rust. -
Page 6: Disposing Of Your Old Machine
Disposing of your old machine When your machine finally reaches the end of its life and you withdraw it from service, you should render it unserviceable before having it disposed of. Warning! Children at play could lock themselves in your machine (and suffocate) or otherwise endanger their lives. -
Page 7: Description Of The Appliance
Description of the appliance The inside of the appliance IN111 1. Upper basket stop 2. Upper spray arm 3. Salt container 4. Detergent dispenser 5. Control panel 6. Rinse aid dispenser 7. Filters 8. Lower spray arm 9. Upper basket 10. -
Page 8: Control Panel
Control panel 1. Programme selector push buttons 2. “Delay start” push button This option allows the start of the programme to be delayed by 3, 6 or 9 hours. 3. Indicator lights Phase indicator lights washing phase illuminates when the washing phase is running drying phase illuminates when the drying phase is running end of programme... -
Page 9: Before Using Your Dishwasher For The First Time
5. Fill the rinse-aid dispenser. Setting the water hardness range The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance. - Page 10 To select a different level be sure that the dishwasher is off and then proceed as follows: 1. Press INTENSIV 70° and 30 MIN programme push buttons simultaneously. 2. While keeping the programme push buttons INTENSIV 70° and 30 MIN pressed switch on the dishwasher by pressing the On/Off push button.
-
Page 11: Filling With Special Salt
4. To memorise the new level, switch off the dishwasher by pressing the On/Off push button. Filling with special salt Caution! The packaging of dishwasher salt and detergents are often very similar. The accidental filling of the salt compartment with detergent would ruin the water softener. -
Page 12: The Rinse Aid
The rinse-aid The rinse-aid ensures brilliant crockery and also helps it to dry. It is automatically added in during the hot rinsing cycle. The storage compartment built in to the inside of the door can hold about 110 ml of rinse-aid, which will be sufficient for between 16 and 40 dishwashing programmes, according to the dosage setting. - Page 13 4. Press the 30 MIN push button again, the "end of programme" indicator light turns off, this means that the rinse aid indicator light has been deactivated. 5. To memorise the operation, switch off the dishwasher by pressing the On/Off push button.
-
Page 14: Loading Cutlery And Dishes
Wooden platters. Items made from synthetic fibres. Attention! When buying new dishes, ensure that they are dishwasher proof. Before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance. Open the door and slide out the baskets. -
Page 15: The Lower Basket
The lower basket The lower basket is designed to take saucepans, lids, plates, salad bowls, cutlery etc. Serving dishes and large lids should be arranged around the edge of the basket, ensuring that the upper spray arm can turn freely. UI51 The two rear rows of prongs on the lower basket can be easily lowered to allow you to load pots, pans and bowls. -
Page 16: Cutlery Basket
Such cutlery can be placed in the upper basket. To unload your dishwasher more easily, you can take the cutlery basket out of the lower basket and unfold it. this makes it easier to remove small pieces of cutlery. -
Page 17: Adjusting The Height Of The Upper Basket
Before closing the door, ensure that the spray arms can rotate freely. Adjusting the height of the upper basket If washing very large plates (over 27 cm and up to 31 cm in diameter) you can load them in the lower basket after moving the upper basket to the higher position. To move to the higher position proceed as follows: 1. -
Page 18: Use Of Detergent
If detergents in tablet form are used with the “30 MIN“ programme, it is advisable to put the tablet directly in the dishwasher and not in the dispenser or in special tablet containers. This ONLY applies to this programme. -
Page 19: 50°C Programmes And Compact Powders
50°C programmes and compact powders On the basis of their chemical composition, dishwasher detergents can be classified into two groups: - conventional, alkaline detergents with caustic components: - low-alkaline compact powders with natural enzymes. The enzymes in low-alkaline compact powders have a dirt-dissolving effect and are also biodegradable. -
Page 20: Washing Programmes
2. In these programmes the appliance is fitted with a special device “SENSORLOGIC”. This device allows the dishwasher to automatically individuate if the baskets are full loaded or not and consequently riduce the washing temperature and time duration of the programme. - Page 21 Programme Delicate 40°C with “SENSORLOGIC” 4. This dishwasher gives you the possibility to select a “Rinse and Hold” programme by the use of the “Intensive 70°” push button. By pressing the “Intensive 70°” push button only once, the phase indicator lights of that programme (washing and drying) will come on.
-
Page 22: Operating Instructions
Add the required amount of detergent into the dispenser according to the recommended quantity given in the Washing programmes chart. Close the detergent dispenser lid. 7. Close the dishwasher door 8a. Setting and starting the programme without “Delay Start” Press the push button corresponding to the required programme: the indicator light corresponding to the programme illuminates and the phase indicator lights for that programme start flashing. -
Page 23: At The End Of The Washing Programme
It is now possible to select a new washing programme. 10. At the end of the washing programme The dishwasher will automatically stop and the phase indicator light “end of programme” will come on. The indicator light of the programme just ended will remain on. - Page 24 Switch off the dishwasher by pressing the On/Off push button. Wait a few minutes before opening the dishwasher’s door; in this way they will be cooler and the drying will be improved. Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.
-
Page 25: Maintenance And Cleaning
Nevertheless the filters should be checked and cleaned from time to time. Dirty filters will degrade the washing result. 1. Open the door, remove the lower basket. 2. The dishwasher filter system comprises a coarse/fine filter, microfilter and a flat filter. Unlock the filter system using a handle on the microfilter, and remove. - Page 26 During this process ensure that the flat filter does not protrude above the base of the washing compartment. The dishwasher must not be used without filters. Incorrect repositioning and fitting of the filters will produce poor washing results.
-
Page 27: Something Not Working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. The dishwasher is fitted with a number of alarm systems which can help you to quickly determine the cause of any problems such as; the dishwasher will not start or... - Page 28 The dishes are not clean (poor wash) Once the checks have been carried out switch on the dishwasher and start a washing programme, if the fault code reappears in the digital display, contact your local Service Force Centre.
-
Page 29: Service & Spare Parts
Service & Spare Parts In the event of your appliance requiring service, or if you wish to purchase spare parts, contact your local AEG Service Force Centre by telephoning Your call will be automatically routed to the Service Centre covering your post code area. -
Page 30: Guarantee Conditions
Guarantee Conditions Standard Guarantee Conditions We, AEG, undertake that if within 12 months of the date of purchase this AEG appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: The appliance has been correctly installed and used only on the electricity or gas supply stated on the rating plate. -
Page 31: European Guarantee
European Guarantee European Guarantee If you should move to another country within Europe then your guarantee moves with you to your new home subject to the following qualifications: The guarantee starts from the date you first purchased your product. The guarantee is for the same period and to the same extent for labour and parts as exists in the new country of use for this brand or range of products. -
Page 32: Hints For Test Centres
Hints for test centres Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser. Test standard Reference programme Load Rinse aid selector Detergent dosage Arrangement upper basket Arrangement lower basket EN 50242 - Eco 50°C... -
Page 33: Technical Data
Technical data Technical specifications Dimensions Electrical connection Motor rating during wash Power of heating element Overall power Water supply pressure Capacity This appliance complies with the following E.E.C. Directives: - 73/23/CEE of 19/02/73 (Low Voltage Directive) and subsequent modifications; - 89/336/CEE of 03/05/89 (Electromagnetic Compatibility Directive) and subsequent modifications. -
Page 34: Installation And Connection Instructions
Installation and connection instructions Fitting under a counter (kitchen worktop or sink) By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture. -
Page 35: Connecting To The Water Supply
This will prevent deposits of sand or rust clogging the inlet hose. The water pressure must be within the limits given in the technical specifications. Your dishwasher has been built in accordance with the valid regulations governing water-consuming appliances and is equipped with safety devices which prevent used water from flowing back into the drinking water mains. -
Page 36: Extension Hoses
Arrange the extension hose horizontally along the floor and allow it to rise only where it is to be connected to the drain. Water protection system To protect your dishwasher from water damage, it is equipped with a water protection system. In case of malfunction the “washing” and “drying” phase indicator lights start flashing (see Something not working). -
Page 37: Electrical Connection
Electrical connection If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted. Important! The wires on the mains lead are coloured in accordance with the following code: Green and Yellow -Earth... - Page 38 The plug moulded onto the lead incorporates a 13amp BSI362 fuse. Only ASTA or BSI fuses should be used. The plug must not be used if the fuse cover/carrier is lost. The cover/carrier is indicated by the coloured insert at the base of the product. A replacement cover/carrier must be obtained from your local Service Force Centre.
- Page 40 From the Electrolux Group. The world’s No.1 choice. The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx.
Need help?
Do you have a question about the FAVORIT 54730 and is the answer not in the manual?
Questions and answers