SEIKO EPSON CORPORATION. The information contained herein is designed only for use with this EPSON product. EPSON is not responsible for any use of this information as applied to other products.
Registration and Warranty ......5 Unpacking the Projector ......6 Setting Up Positioning the Projector .
Page 4
Adjusting the Image ......26 Controlling the Projector ......29 Shutting Down the Projector .
Page 5
Where To Get Help ......75 Appendix A: Installing the Projector ......78 Connecting to Additional Connecting to a PC Desktop Computer .
Page 6
Appendix B: Important Safety Instructions ..... . . 89 Notices Remote Control Information ..... . . 91 Declaration of Conformity .
Page 7
Images are displayed at a resolution of 1024 × 768 pixels (PowerLite 7600p) or 800 × 600 pixels (PowerLite 5600p). The 1.3-inch LCD provides a high contrast ratio for incredibly vivid images and clear text.
Getting the Most from Your Projector Your EPSON PowerLite projector is a highly versatile presentation note tool. You can connect it to one or two computer sources and up to You can connect a maximum three video sources and easily switch between them. You can also of four sources at the same include sound for up to two of the sources.
Notes contain important information about your projector. Reading This Manual Online Your PowerLite 5600p/7600p CD-ROM includes an electronic copy of this manual. You may find it convenient to copy it onto your laptop’s hard drive so it’s always with you—for example, when taking your presentation on the road.
See page 66 Help for details. support.epson.com Download FAQs and e-mail your questions to EPSON support. CD-ROMs Your Owner’s Kit includes two CD-ROMs. The PowerLite 5600p/7600p CD-ROM lets you register electronically and includes an electronic copy of this book as well as a link to Presenters Online.
If you still need help after checking this User’s Guide and the sources listed above, you can use the EPSON PrivateLine Support service to get help fast. Call (800) 637-7661 and enter the PIN on the card in your Owner’s Kit. Or take advantage of EPSON’s automated support services 24 hours a day.
(or the equivalent) when you need to send the projector to another location. If you are moving the projector by hand, use a carrying case (such as the optional cases available from EPSON). See page 8 for more information about cases. Welcome...
Some older PowerBooks and Macintosh desktop models may need the Macintosh adapter set shown on page 83 (available from EPSON; see page 8). Older iMac systems may need a special adapter to provide a VGA output port; see your computer dealer.
Optional Accessories To enhance your use of the projector, EPSON provides the following optional accessories: Product Replacement lamp and air filter Long throw zoom lens Wide angle lens Customized carrying cases: Ceiling mount Suspension adapter for ceiling mount Kensington security lock...
Setting Up the Projector his chapter tells you how to set up the projector for a laptop computer or video presentation. If you need to set up the projector for a permanent installation or connect it to a desktop or workstation computer, see Appendix A.
Positioning the Projector Before connecting the projector, you need to decide where to place it. The location you choose depends on the size of the room and what you are projecting. caution Don’t hold or lift the projector by the lens, or you may damage it.
Page 17
If you place the projector below the level of the screen, you’ll have to tilt it up by extending the feet as shown. Tilting the projector upward causes the image to lose its square shape, but you can correct the...
If you’re using a PowerBook and you can’t connect the cable, you may need to use the Macintosh desktop adapter as shown on page 83 (available from EPSON; see page 8). Computer 1 port Computer 1...
4. Tighten the screws on the connectors. If you don’t need to make any other connections, you can plug in your projector and turn it on. See page 22 for instructions. Connecting the Cable for Remote Mouse Control Using the remote control as a wireless mouse lets you control your computer and click through slideshow-style presentations, such as PowerPoint, from up to 30 feet away (for details, see page 40).
2. Connect the other end of the audio cable to your laptop’s If you don’t need to make any other connections, you can plug in your projector and turn it on. See page 22 for instructions. Setting Up the Projector jack on the projector.
For S-Video, use the S-Video cable supplied with your video device or obtain one from your electronics dealer. For component video, you’ll need a VGA-to-3BNC cable. You can purchase this from EPSON; see page 8. See the following illustration if you’re not sure which type of connectors you have.
Connecting an RCA Video Cable Before starting, make sure the projector and your DVD player or other video source are turned off. 1. Connect the yellow plug on one end of the RCA video cable to 2. Connect the other end of the cable to the video-out jack on your To include sound in your presentation, connect the RCA audio cable as described on page 19.
Before starting, make sure the projector and your DVD player or other video source are turned off. 1. Insert one end of an S-Video cable into the projector’s connector.
If your video source has component (BNC) connectors, you can use them to project a higher quality video image. However, you’ll need a VGA-to-3BNC video cable, which is available from EPSON; see page 8. Before starting, make sure the projector and your DVD player or other video device are turned off.
Connecting the Audio Cable To include sound in your video presentation, you need to connect the RCA audio cable that came with your projector. If you’ve connected more than one video source, you can include sound for just one of the sources.
(as described in Chapter 1 or Appendix A), you’re ready to turn on the projector, adjust the image, and give your presentation. Although you can operate the projector without it, the remote control lets you use additional features.
Turning On the Projector Follow these steps to plug in and turn on the projector: 1. Connect one end of the power cord to the projector’s power inlet. 2. Connect the other end to a grounded electrical outlet. 3. Remove the lens cap.
Page 29
Power Power button power light The power light flashes green as the projector warms up, and the projection lamp comes on in about 30 seconds. The power light stays green, and you may see a blue screen with the message displayed. This is normal.
No Signal If you’re using a PowerBook: You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple menu, select 2.
Page 31
On most systems, the screen and the projector, or display on both at the same time. Allow a few seconds for the projector to sync up after pressing it. Depending on your computer’s video card, you might need to use the Display utility in the Control Panel to make sure that both the LCD screen and external monitor port are enabled.
Rotate the zoom ring to reduce or enlarge the image. If the image still isn’t large enough, you may need to move the projector farther away from the screen. You can also use the button on the remote control to zoom in on a portion of the image.
Adjusting the Height of Your Image If the image is too low, you can raise it by extending the projector’s feet. 1. Stand behind the projector. Pull up the blue foot release levers and lift the front of the projector. This unlocks the feet.
Resizing the Image Some computer images need to be resized to display in the projector’s Power Computer Video native resolution. If only part of your computer image is displayed, you can correct it with the A/V mute Resize Shift If you’re projecting from video equipment, pressing the button switches the aspect ratio between 4:3 and 16:9.
Follow the instructions below to access theses features from your projector’s control panel. You can also access these features, plus many others, using the remote control as described in Chapter 3.
When the projector has cooled, the orange light stays on and the exhaust fan shuts off. If you want to turn the projector on again, wait until the orange light stops flashing. Then press the turn off the projector.
30 feet away. You can use it to turn the projector on and off, control the picture and sound, and highlight your presentation by using it as a digital pointer.
If they don’t, you need to change the batteries as described above. Turn off the remote control before transporting it or storing it with the projector in a carrying case; this prevents the batteries from discharging if something presses against one of the remote control’s buttons.
Page 39
Keep the following in mind when using the remote control: Stand within about 30 feet of the projector. You can point the remote control either at the front or back of the projector or at the screen (the projector’s front sensor can detect signals bounced off the screen).
Turning Off the Picture and Sound You can use the button on the remote control to darken A/V Mute your screen and turn off the sound. This is useful if you want to temporarily re-direct your audience’s attention without the distraction of a bright screen.
Displaying Picture-in-Picture Video You can open a small video window on your computer image, and view a video at the same time as your computer presentation. First make sure you have connected your VCR or other video source using an RCA or S-Video cable as described in Chapter 1. (You can’t display the picture-in-picture window using component video.) If you’re using S-Video, you need to select it in the as described on page 53.
5. To cancel the pointer feature, press on the remote control. again. Press again to see Power Freeze A/V Mute R/C ON E-Zoom spotlight pointer erase Enter note You can use the projector’s Effect menu to select different pointers. See page 49. Using the Remote Control...
You can draw outline boxes on the screen to highlight areas of your presentation or video. 1. To activate the box tool, press button note You can use the projector’s Effect menu to change the color and shape of the box. 2. Use the See page 49.
Using Horizontal and Vertical Highlights With the bar tool, you can draw bold horizontal or vertical lines on the screen to underline or highlight your presentation points. You can choose from three types of bars. 1. To activate the bar tool, press button horizontal bar appears across the screen.
First make sure you have connected the mouse cable between the projector and your computer as described on page 13 (for laptops) or in Appendix A (for other systems). Note that your computer’s mouse may be disabled when you connect the projector’s mouse cable. If you have a laptop, you won’t be able to use an external mouse;...
Fine-tuning the Projector ou can use the projector’s on-screen menus to adjust the image, sound, and other features. You can also create your own startup screen, customize the highlighting tools, and find out how long your lamp has been in use. This chapter covers the following information:...
Using the Projector’s Menu System The eight projector menus let you adjust and customize the projector features from either the control panel or remote control: Fine-tuning the Projector The Video menu controls the look and quality of the projected image. It lets you adjust the image position and fine-tune settings such as Brightness, Sharpness, and Contrast.
Menu Help Comp1 Comp2/YCbCr E@sy-MP Video Auto Resize P in P Preset - Volume + menu options Position Adjustment Tracking 9999 Sync. Brightness Contrast Sharpness Gamma Dynamic Normal Natural Resolution Auto Manual Select Preset Select Reset Execute Fine-tuning the Projector...
Page 50
, press Reset Enter select , and then press 6. Press the Enter 7. Press Fine-tuning the Projector or down on the button on the remote control, to scroll Enter through the menu list. Video Menu Sync Tracking Keystone...
The Video menu lets you make adjustments to the projected image. The options available in the menu depend on which source is connected to the projector: standard computer video, DVI (digital) computer video, composite or S-Video, or component video. Video...
Adjusts the difference between light and dark areas. Tracking (computer images only) Removes unwanted vertical lines from a computer image by matching the projector’s internal clock to the computer display signal. Sync (computer images only) Corrects fuzziness by synchronizing the projector with the tracking signal sent from the computer.
(resolution, tracking, sync signal, and position) in up to five different combinations. This is useful if you use more than one computer with the projector; you can save the settings for each one and recall them when necessary. Follow these steps to save the projector’s current settings:...
You see the setting number displayed in yellow at the top right of the screen. To select another number, press the setting number you want is displayed. The projector resets itself according to the selected setting. Adjusting the Sound You can use the Audio menu to adjust the sound volume or treble/bass balance.
4 Bar User's Logo Cursor Speed Advanced Reset About Reset All :Select :Enter 3. Press to select the Effect menu. Enter button Enter Menu button Enter . You see the Effect menu: Effect Setting Setting Setting Setting Execute Fine-tuning the Projector...
Page 56
4. Use the arrow buttons (control panel) or the 5. When you’re finished customizing the highlighting tools, press Fine-tuning the Projector customize: Cursor/Stamp Lets you define the shape and size for three different pointers. For some pointers, you can also define the color and length.
You can transfer any image from your computer or video source to the projector, and then use it as your startup screen. You can also use it as the screen displayed when the projector is not receiving a signal or when you press the button.
Enter and press Enter Saving the logo may take a few moments. Do not use your projector or video source (computer, DVD player, etc.) while the logo is being saved. press to return to the menu screen. button to display the menu screen (if not already Menu displayed).
Customizing Projector Features You can use the Setting menu to disable the projector’s sleep mode, adjust the image shape, and customize several other features. 1. Press the button. Menu 2. Use the arrow keys (control panel) or the control) to highlight...
RGB. Sleep mode When sleep mode is on, the projector turns off the lamp if it has not received any input signals for 30 minutes. Turn sleep mode off if you want the lamp to remain on all the time.
4. Use the arrow buttons (control panel) or the (remote control) to set the following options: Language Select from 9 languages to be used for the projector menus. Startup Screen Turn on to display your captured image or logo whenever the projector starts.
3. When you’re finished, press register until you’ve used the lamp for at least 10 hours. Restoring the Default Settings The Reset All option lets you return all the projector settings to their default values. Select remote control to display the confirmation screen. Select...
You also need to periodically clean the air filter on the bottom of the warning projector. A clogged air filter can block ventilation needed to cool the Before you clean any part of projector and keep it from overheating.
Cleaning the Lens Clean the lens whenever you notice dirt or dust on the surface. Cleaning the Projector Case Before you clean the case, first turn off the projector and unplug the power cord. Maintaining and Transporting the Projector Use a canister of compressed air to remove dust.
1. Turn off the projector, allow it to cool down, and unplug the power cord. 2. Turn the projector on its side so that the handle is on top and you can access the filter easily. 3. To clean the filter, EPSON recommends using a small vacuum cleaner designed for computers and other office equipment.
You can check to see how many hours the lamp has been used. See page 55. Contact your dealer or call EPSON at (800) 873-7766 in the United States and Canada for a replacement lamp. Request part number ELPLP12 Maintaining and Transporting the Projector on the latch until it clicks in place.
Page 67
Follow these steps to replace the lamp: 1. Turn off the projector and unplug the power cord. 2. Allow the projector to cool down for at least an hour (if it has been on). 3. Use a screwdriver to loosen the retaining screw on the lamp cover.
Resetting the Lamp Timer After installing a new lamp, you need to reset the timer so the projector can keep track of how many hours it has been used. Follow these steps: 1. Plug in the projector and turn it on (see page 22).
When transporting the projector for business use, first put it in a hard-shell carrying case (such as an optional EPSON case), then pack it in a firm box, using cushioning around the case. When hand-carrying the projector, store it in a carrying case, such as one of the optional cases offered by EPSON.
Page 70
Maintaining and Transporting the Projector...
User’s Guide, do not attempt to service this product yourself. his chapter helps you solve problems with your projector, and tells Using the projector’s on-screen help system What to do when the projector’s status lights flash Solving problems with the image or sound...
Tells you what to do if you see a Help for the sound Tells you what to do when your audio isn’t working Language selection Lets you display the help information and projector menus in any of nine different languages button. You see the help menu. ? Help...
The projector is operating normally. The projector is warming up. Wait for the image to appear. The projector is in sleep mode. You can unplug it to turn it off or press the Power button to turn it on. The lamp is cooling down. Don’t unplug the projector until the light stops flashing and remains orange.
Contact EPSON for help; see page 75. There is a problem with the cooling fan or temperature sensor. Turn off the projector and unplug it. Contact EPSON for help; see page 75. Check that the power light is green, not flashing, and the lens cover is off.
Page 75
On most systems, the key lets you toggle between the LCD screen and the projector, or to display on both at the same time. Allow a few seconds for the projector to sync up after pressing it.
Page 76
Make sure your computer’s resolution setting is correct. Ideally, it should be 1024 × 768 (for the PowerLite 7600p) or 800 (for the PowerLite 5600p) to match the projector’s native resolution. If this option isn’t available, select one of the other compatible video formats listed on page 97. Windows: Right-click the desktop, select tab, and use the dialog box to select a different resolution.
Page 77
The image isn’t square, but trapezoid-shaped. Make sure the projector isn’t placed off to one side of the screen, at an angle. Place the projector directly in front of the center of the screen, facing the screen squarely. If you’ve tilted the projector upward by extending the legs, the image will be broader at the top.
Page 78
The tracking and sync settings match the projector’s internal clock to the computer’s display signal. If you use the projector with different computers, you can save the projector’s settings for each computer and recall them whenever needed using the Preset option.
Page 79
The wrong source may be selected. Press the button on the control panel—or the button on the remote control—to select the proper source. Video Allow a few seconds for the projector to sync up after pressing the button. option in the projector’s Video , and...
Solving Problems Make sure the remote control is turned on. Make sure you are within 30 feet of the projector, and within range of the projector’s front or back sensor (approximately 30° to left or right and 15° above or below).
Electronic support and automated telephone services Service Access World Wide Web From the Internet, you can reach EPSON’s product support page at Technical Support http://support.epson.com. After selecting your product, you can view frequently asked questions and answers, download product documentation, and receive technical advice through e-mail.
Page 82
Before you call, please have the following information ready: You can purchase screens, carrying cases, and other accessories from EPSON by calling (800) 873-7766; in Canada, please call (800) 873-7766 for dealer referral. To purchase accessories online or view EPSON’s complete product catalog, visit the EPSON Store at www.epsonstore.com (U.S.
Page 83
Connecting to Additional Equipment his appendix explains how to connect the projector to a desktop PC or Macintosh, high-end workstation, more than one computer, or a DVI video source. It also provides guidance on setting up the projector in a permanent installation.
See “Positioning the Projector” on page 10 for If you place the projector’s lens so it’s level with the top of the screen, more information. the image will be square and you won’t have to adjust it. If you place the lens lower than the top of the screen, you’ll have to tilt the...
The projector’s internal speakers are loud enough for most rooms. However, if your installation requires maximum volume and sound quality, you can connect the projector to external speakers or a public address (PA) system. This disables the projector’s internal speakers.
Follow the steps in each section for the cables you need to connect. Before beginning, make sure the projector and computer are turned off. If you need help with positioning the projector, see page 10. Connecting the Computer Cable 1. Disconnect the monitor cable from the video port on the back of 2.
To use the remote control as a mouse, follow the steps below. You’ll use a different mouse cable, depending on whether your computer has a round PS/2 mouse port or a flat USB port. 1. Connect the round end of the mouse cable to the projector’s port, as shown. Mouse...
Connecting the Audio Cable If your presentation includes sound and you want to use the projector’s built-in speakers, you’ll need to connect the audio cable. 1. Connect one end of the audio cable to the 2. Connect the other end of the audio cable to the speaker or Connecting to Additional Equipment projector.
3. Connect the other end of the computer cable to the video port on the Macintosh. If it doesn’t fit, you may have to use a Macintosh desktop adapter, which you can buy from EPSON (see page 8). Computer 1 port...
To use the remote control as a mouse follow the steps below. If the Macintosh has a USB port, you can use the USB mouse cable included with the projector. If it has a round mouse port, you’ll need a Macintosh mouse cable; see your projector dealer for help in obtaining the correct cable.
2. Disconnect your Macintosh’s mouse cable. Connect the other end of the projector’s mouse cable to the mouse or USB port on your Macintosh. Connecting the Audio Cable If your presentation includes sound and you want to use the projector’s built-in speakers, you’ll need to connect the audio cable.
Connecting to a Second Computer To connect a second computer to the projector, you need to use the projector’s additional VGA (D-sub 15-pin) cable, like the one that came with your projector. You can purchase this from your computer or electronics dealer.
Connecting to a High-End Workstation There is no across-the-board standard for workstation video output. However, your PowerLite projector is capable of remapping input × resolutions up to 1600 1200 pixels. Workstations that follow the SXGA standard and use the HD15 (standard VGA) connector won’t need an adapter cable or any special connection device.
Computer 1 need to use the projector’s VGA port again, be sure to slide the switch back to the left.) port; if you want to connect a mouse cable (to use the remote DVI port .
Do not use the projector near water or sources of heat. Use attachments only as recommended. Use the type of power source indicated on the projector. If you are not sure of the power available, consult your dealer or power company.
Page 96
Notices Do not place the projector where the cord can be walked on. This may result in fraying or damage to the plug. Unplug the projector from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not use liquid or aerosol cleaners.
Remote Control Information You can operate the projector by remote control via a line-of-sight infrared (IR) receiver at the front and rear of the projector. The projector may not respond to remote control commands under the following conditions: There is an object between the remote control IR emitter and the IR receiver on the projector.
(2) this device must accept any interference received, including interference that may cause undesired operation. Trade Name: Type of Product: LCD Projector Model: Notices EPSON AMERICA, INC. 3840 Kilroy Airport Way MS: 6-43 Long Beach, CA 90806-2469 (562) 290-5254 EPSON...
FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Lamp life Part number Remote Control Range Batteries Mouse Compatibility Supports PS/2, USB, serial, and ADB Remote IR Receiver Supports EPSON Remote IR Receiver, 10-foot (3-meter) cable (typically used for rear screen projection) Dimensions Height Width Depth Weight Electrical Rated frequency...
(XGA for the PowerLite 7600p, SVGA for the PowerLite 5600p). The frequencies of some computers may not allow images to display correctly; see your computer’s documentation for details. Mode...
Interface Connectors Computer 2/ Component Video VGA (video in) DVI connector connector connector VGA / DVI switch Computer 1 Analog Digital Computer 2 / Component Video S-Video connector Audio 1 connector S-Video composite (RCA) Audio out connector video connector Video L-Audio2-R Audio 1 Audio Out...
Computer Video Port Pin Assignments The Computer 1 analog port (VGA) and the Monitor Out port are female video RGB, 15-pin micro-D-style connectors. Here are their pin assignments: Pin no. Computer 1 port Red video Green video Blue video Monitor (ID bit 2) Red video GND Green video GND Blue video GND...
Since the size of the image can be changed by rotating the zoom ring, a range of distance is given for each screen size. Note that if you tilt the projector upward by extending the feet or use electronic keystone correction, your image size may vary.
Page 109
Wide Angle Lens (ELPAW01) Diagonal screen size Distance 30 inches 2.49 to 3.35 feet (0.76 to 1.02 meters) 60 inches 5.25 to 6.96 feet (1.60 to 2.12 meters) 100 inches 8.96 to 11.8 feet (2.73 to 3.59 meters) 200 inches 18.1 to 23.8 feet (5.53 to 7.26 meters) 300 inches 27.3 to 35.8 feet (8.31 to 10.90 meters)
Page 111
Desktop adapter, Macintosh, 83 to 84 Desktop computer, connecting, 80 to 82, 83 to 85 Digital visual interface, see DVI Dimensions, 96 Display formats, 97 to 99 Distance from projector to screen, 10, 102 to 103 Drawing on the screen, 37 to 39 Index...
Page 112
Highlighting tools, 37 to 39, 49 to 50 iBook, connecting to, 12 iMac, connecting to, 7 Image adjusting, 26 to 28, 45 to 47 capturing and saving in projector, 51 to 52 correcting shape, 27, 53, 71 focusing, 26 height, adjusting, 27 positioning, 27, 46...
Page 113
Picture, see Image Picture-in-picture video source, selecting, 53 Pin assignments, connector, 101 Pointer tool, 37 Positioning image, 27 projector, 10 to 11, 102 to 103 Power button, 23 consumption, 96 status light, 67 supply specification, 96 Presenters Online, 4, 75...
Page 114
67 to 68 using on-screen help, 66 Turning off picture (using A/V Mute), 29, 35 Turning off projector, 30 Turning on projector, 22 Unpacking projector, 6 to 7 USB mouse cable, 6 User’s Logo menu, 42, 51 to 52 Video button, 34...
Need help?
Do you have a question about the PowerLite 5600p and is the answer not in the manual?
Questions and answers