13. TECHNICAL DATA ............22 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind.
ENGLISH 1. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes in- juries and damages. Always keep the instructions with the appliance for future reference. 1.1 Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability.
SAFETY INSTRUCTIONS • Do not pull the mains cable to discon- nect the appliance. Always pull the 2.1 Installation mains plug. • Remove all the packaging and the • Do not touch the mains cable or the transit bolts.
ENGLISH • Before maintenance, deactivate the ap- • Disconnect the appliance from the pliance and disconnect the mains plug mains supply. from the mains socket. • Cut off the mains cable and discard it. • Do not use water spray and steam to •...
ENGLISH The spin area: : the child safety lock indicator. – Washing indicators: : the Spin speed indicator – – : the washing phase : the No Spin indicator – – : the rinses phase : the Rinse Hold indicator –...
Page 8
Programme Type of load and soil Temperature range Maximum load, Maximum spin Special programme for curtains. The prewash Шторы phase activates automatically. 40 °C - Cold 1 kg, 800 rpm Special programme for one synthetic blanket, du- Одеяла vet, bedspread and so on.
ENGLISH Programme ■ ■ ■ 1) If you set No Spin option the only drain phase is available. 6. CONSUMPTION VALUES The data of this table are approximate. Different causes can change the ener- gy and water consumption data and the programme duration. These causes are the quantity and the type of laundry, the water and the ambient tempera- ture.
10 www.electrolux.com 7. OPTIONS 7.1 Temperature 7.3 Prewash Set this option to change the default tem- With this option you can add a prewash perature. phase to a washing programme. Use this option for heavy soil. Indicator = cold water.
ENGLISH • To activate/deactivate the option, press at the same time until the indicator comes on/goes off. You can activate this option: • After you press , the options and ■ ■ ■ the programme knob are locked. ■ ■ ■...
12 www.electrolux.com 9.1 Loading the laundry Open the appliance door. Put the laundry in the drum, one item at a time. Shake the items before you put them in the appliance. Make sure not to put too much laundry in the drum.
ENGLISH • Position A for powder detergent (factory setting). • Position B for liquid detergent. When you use the liquid detergent: – Do not use gelatinous or thick liquid detergents. – Do not put more liquid then the maximum level. –...
14 www.electrolux.com Press again to start the pro- 9.9 At the end of the gramme immediately. programme • The appliance stops automatically. 9.6 Interrupting a programme • The acoustic signal operates (if it is acti- and changing the options vated).
ENGLISH • After 5 minutes from the end of the The display shows the end of the last washing programme set programme. Turn the programme knob to set a new Press the button to activate the ap- cycle. pliance again. 10.
16 www.electrolux.com Use the correct quantity of the water soft- ener. Obey the instructions that you find on the packaging of the product. 11. CARE AND CLEANING WARNING! 11.2 Maintenance wash With the low temperature programmes it Before maintenance, disconnect the ap- is possible that some detergent stays in pliance from the mains supply.
ENGLISH 11.7 Emergency drain 11.8 Frost precautions Because of a malfunction, the appliance If the appliance is installed in an area cannot drain the water. where the temperature can be less than If this occurs, do steps (1) through (10) of 0°...
20 www.electrolux.com Empty the drain pump. Refer to the WARNING! emergency drain procedure. Make sure that the temperature is more than 0 °C before you use When the drain pump is empty, install the appliance again. the inlet hose again.
Page 21
ENGLISH Problem Possible solution Make sure that the drain hose has no kinks or bends. Make sure that the drain filter is not clogged. Clean the filter, if necessary. Refer to 'Care and cleaning'. Make sure that the connection of the drain hose is cor- rect.
22 www.electrolux.com After the check, activate the appliance. If the display shows other alarm codes. The programme continues from the point Deactivate and activate the appliance. If of interruption. the problem continues, contact the Serv- If the problem occurs again, contact the ice.
Need help?
Do you have a question about the EWF 1476 EDU and is the answer not in the manual?
Questions and answers