Page 1: Before Use
Interchangeable Lens Digital Camera ILCE-7/ILCE-7R How to Use Before Use Names of parts Identifying parts (Front side) [1] Identifying parts (Rear side) [2] Identifying parts (Top side/Side view) [3] Identifying parts (Bottom view) [4] Identifying parts Lens FE 28-70 mm F3.5-5.6 OSS (Supplied with ILCE-7K) [5]...
Page 2: Table Of Contents
About the [In-Camera Guide] [10] Confirming the operation method Confirming the operation method Using the control wheel [11] Using MENU items [12] Using the Fn (Function) button [13] Using the “Quick Navi” Shooting Shooting still images/movies Shooting still images [14] Shooting movies [15] Selecting a shooting mode List of mode dial functions [16]...
Page 3: Using Shooting Functions
Using shooting functions Using the zoom Zoom [30] The zoom features available with this product [31] Zoom Setting [32] About zoom scale [33] Using the flash Using flash (sold separately) [34] Flash Mode [35] Flash Comp. [36] Selecting a screen display mode Switching the screen display (Shooting) [37] DISP Button (Finder) [38] DISP Button (Monitor) [39]...
Page 4 AF Micro Adj. [61] Focus Settings [62] AF w/ shutter (still image) [63] AF On [64] Eye AF [65] Phase Detect. Area (ILCE-7) [66] Measuring the exact distance to the subject [67] Adjusting the exposure Exposure Comp. [68] Exposure compensation dial [69]...
Page 5 Selecting a drive mode (Continuous shooting/Self-timer) Drive Mode [79] Cont. Shooting [80] Spd Priority Cont. [81] Self-timer [82] Self-timer(Cont) [83] Cont. Bracket [84] Single Bracket [85] WB bracket [86] DRO Bracket [87] Bracket order [88] Selecting the ISO sensitivity ISO [89] Multi Frame NR [90] Correcting the brightness or contrast D-Range Opt.
Page 6 Audio Recording [99] Audio Level Display [100] Audio Rec Level [101] Audio Out Timing [102] Wind Noise Reduct. [103] Auto Slow Shut. (movie) [104] MOVIE Button [105] Customizing the shooting functions for convenient use Memory [106] Function Menu Set. [107] Custom Key Settings [108] Function of the control wheel [109] Function of the AEL button [110]...
Page 7 Grid Line [129] Auto Review [130] Live View Display [131] FINDER/MONITOR [132] Release w/o Lens [133] e-Front Curtain Shut. (ILCE-7) [134] S. Auto Img. Extract. [135] APS-C Size Capture [136] Shading Comp. [137] Chro. Aber. Comp. [138] Distortion Comp. [139]...
Page 8 Viewing panoramic images Playing back panoramic images [151] Printing Specify Printing [152] Using viewing functions View Mode [153] Display Rotation [154] Slide Show [155] Rotate [156] Protect [157] 4K Still Image PB [158] Viewing images on a TV Viewing images on an HD TV [159] Viewing images on a “BRAVIA”...
Page 9 Display Quality [170] Pwr Save Start Time [171] PAL/NTSC Selector [172] Cleaning Mode [173] Demo Mode [174] Remote Ctrl [175] HDMI Resolution [176] CTRL FOR HDMI [177] HDMI Info. Display [178] USB Connection [179] USB LUN Setting [180] Language [181] Date/Time Setup [182] Area Setting [183] Format [184]...
Page 10 Controlling this product using a Smartphone Smart Remote Embedded [197] One-touch connection with an NFC-enabled Android smartphone (NFC One-touch remote) [198] Transferring images to a Smartphone Send to Smartphone [199] Sending images to an Android smartphone (NFC One-touch Sharing) [200] Transferring images to a computer Send to Computer [201] Transferring images to a TV...
Page 11: Playmemories Camera
Opening a service account [212] Downloading applications [213] Downloading applications directly to the product using the Wi-Fi function [214] Starting the applications Launching the downloaded application [215] Managing the applications Uninstalling applications [216] Changing the order of applications [217] Confirming the account information of “PlayMemories Camera Apps” Viewing on computers Recommended computer environment Recommended computer environment [218]...
Page 12: Movie
Disconnecting the product from the computer [222] Creating a movie disc Disc type [223] Selecting the disc creation method [224] Creating a disc with a device other than a computer [225] Creating Blu-ray Discs [226] Precautions/This product Precautions Precautions [227] On the internal rechargeable battery [228] Notes on the battery pack [229] Charging the battery pack [230]...
Page 13: Shooting
LA-EA2 Mount Adaptor [239] LA-EA3 Mount Adaptor [240] LA-EA4 Mount Adaptor [241] Vertical grip [242] AVCHD format [243] License [244] Trademarks Trademarks [245] Troubleshooting If you have problems If you have problems Troubleshooting [246] Troubleshooting Battery pack and power You cannot insert the battery pack into the product. [247] You cannot turn on the product.
Page 14: Send To
You cannot record images. [254] Recording takes a long time. [255] The image is out of focus. [256] The recording date and time are not displayed on the screen. [257] The date and time are recorded incorrectly. [258] The aperture value and/or shutter speed and/or metering indicator flashes. [259] The image colors are not correct.
Page 15: Memory Cards
You cannot use One-Touch connection (NFC). [281] Computers The computer does not recognize this product. [282] You cannot import images. [283] The image and sound are interrupted by noise when viewing a movie on a computer. [284] Images exported from a computer cannot be viewed on this product. [285] Memory cards Formatted the memory card by mistake.
Page 16: Dial
Situations this product has difficulty handling Situations this product has difficulty handling Situations this product has difficulty handling [298] [1] Before Use > Names of parts Identifying parts (Front side) When the lens is removed 1. AF illuminator/Self-timer lamp 2. Front dial 3.
Page 17 7. Image sensor** 8. Mount 9. Contacts** Do not cover this part during movie recording. Doing so may cause noise or lower the volume. Do not directly touch these parts. [2] Before Use > Names of parts Identifying parts (Rear side) 1.
Page 18: Manual
7. For shooting: C2 (Custom2) button For viewing: (Enlarge) button 8. AF/MF/AEL switch lever 9. Rear dial 10. For shooting: AF/MF (Auto focus/manual focus) button/AEL button For viewing: (Image index) button 11. MOVIE button 12. For shooting: Fn (Function) button For viewing: (Send to Smartphone) button 13.
Page 19: Hdmi
1. Speaker Image sensor position mark (Microphone) jack When an external microphone is connected, the microphone is turned on automatically. If the external microphone is a plugin-power type, the power of the microphone is supplied by this product. (Headphones) jack 5.
Page 20 15. Memory card cover 16. Memory card slot For details on compatible accessories of the Multi interface shoe, visit the Sony web site in your area, or consult your Sony dealer or local authorized Sony service facility. Accessories for the Accessory Shoe can also be used. Operations with other manufactures' accessories are not guaranteed.
Page 21 Make sure that the cord is not pinched when you close the cover. [5] Before Use > Names of parts Identifying parts Lens FE 28-70 mm F3.5-5.6 OSS (Supplied with ILCE-7K) 1. Focusing ring 2. Zoom ring 3. Focal-length scale 4.
Page 22: Sweep
List of icons on the screen For the LCD screen mode For playback (Basic information display) For the viewfinder mode In Auto Mode or Scene Selection mode In P/A/S/M/Sweep Panorama mode...
Page 23 Scene Recognition icons Memory card/Uploading status Remaining number of recordable images Aspect ratio of still images ILCE-7: 24M / 10M / 6.0M / 20M / 8.7M / 5.1M / 2.6M / 2.2M Image size of still images ILCE-7R: 36M / 15M / 9.0M / 30M / 13M / 7.6M / 3.8M / 3.2M...
Page 24: Aps-C Size
Remaining battery Remaining battery warning Flash charge in progress APS-C Size Capture Setting Effect OFF AF Illuminator NFC is activated Airplane Mode No audio recording of movies Wind Noise Reduction SteadyShot/Camera-shake warning Overheating warning Database file full/Database file error Smart Zoom/Clear Image Zoom/Digital Zoom Spot metering area Digital level gauge Audio level...
Page 25: Lock-On
100-0003 Folder - file number Protect Recording format of movies DPOF DPOF set Auto Object Framing Remote control Drive mode Flash mode/Red-eye reduction ±0.0 Flash compensation Focus mode Focus area Face Detection/Smile Shutter Metering mode 7500K A5 G5 White balance (Auto, Preset, Custom, Color temperature, Color filter) D-Range Optimizer/Auto HDR +3 +3 +3 Creative Style/Contrast, Saturation, Sharpness...
Page 26 Picture Effect Smile detection sensitivity indicator Lock on AF Lock on AF guide EV scale Exposure compensation/Metered Manual REC 0:12 Recording time of the movie (m:s) Focus 1/250 Shutter speed F3.5 Aperture value ISO400 ISO AUTO ISO sensitivity AE lock Shutter speed indicator Aperture indicator Histogram...
Page 27: View
Auto HDR image warning Picture Effect error 2013-1-1 10:37AM Date of recording File number/Number of images in the view mode [7] Before Use > Using the strap Using the shoulder strap Attach the shoulder strap to prevent damage caused by dropping the product. 1.
Page 28 [9] Before Use > Adjusting the viewfinder Adjusting the viewfinder (diopter-adjustment) Adjust the diopter-adjustment dial to your eyesight until the display appears clearly in the viewfinder. 1. Turn the diopter-adjustment dial. [10] Before Use > In-Camera guide About the [In-Camera Guide] The [In-Camera Guide] displays descriptions of MENU items, Fn (Function) button, and settings, and if a function cannot be set, the reason why.
Page 29: Using The Control
If you press the on the center of the control wheel after selecting an item shown in gray, the reason the item cannot be set is displayed. Note Assign the [In-Camera Guide] function to a button in advance using the [Custom Key Settings].
Page 30: Tile
operation method Using MENU items In this section, you learn how to change settings related to all camera operations and execute camera functions including shooting, playback, and operation methods. 1. Press MENU button to display the Menu screen. 2. Select the desired MENU item using the up/down/left/right side of the control wheel or by turning the control wheel, and then press in the center of the control wheel.
Page 31: Using The Fn (Function)
4. Select the desired setting value, and press to confirm. [13] Confirming the operation method > Confirming the operation method Using the Fn (Function) button You can recall functions when shooting images. Up to 12 frequently used functions can be registered to the Fn (Function) button.
Page 32 Performing settings on the dedicated screen Select the desired function in step 2, then press on the center of the control wheel. The dedicated setting screen for the function appears. Follow the operating guides (A) to perform the settings. Using the “Quick Navi” You can change the settings directly using the Quick Navi screen when using the viewfinder.
Page 33: Shooting Still Images
4. Turn the front dial to select the desired setting. Some setting values can be finely adjusted by turning the rear dial. Performing settings on the dedicated screen Select the desired function in step 3, then press on the center of the control wheel. The dedicated setting screen for the function appears.
Page 34: Monitor
2. Adjust the monitor angle, and hold the camera. Or look through the viewfinder and hold the camera. 3. Press the shutter button halfway down to focus. When the image is in focus, a beep sounds and the indicator ( ) lights.
Page 35: Shooting Movies
The subject is seen through glass. The subject is moving quickly. There is reflective light or shiny surfaces. There is a flashing light. The subject is backlit. [15] Shooting > Shooting still images/movies Shooting movies You can record movies by pressing the MOVIE button. 1.
Page 36: Intelligent
List of mode dial functions You can select the desired shooting mode by turning the mode dial. Available functions (Auto Mode): Allows you to shoot still images of any subject under any condition with good results by setting the values determined appropriate by the product. P (Program Auto): Allows you to shoot with the exposure adjusted automatically (both the shutter speed and the aperture value (F value)).
Page 37: Superior
The product analyzes the subject, and allows you to shoot with appropriate settings. 1. Set the mode dial to (Auto Mode). 2. MENU → (Camera Settings) → [Auto Mode] →[Intelligent Auto]. When [Mode Dial Guide] is set to [On], you can select the desired settings after you have changed the position of the mode dial.
Page 38: About Scene
When [Mode Dial Guide] is set to [On], you can select the desired settings after you have changed the position of the mode dial. 3. Point the camera to the subject. When the camera recognizes a scene, scene recognition icon appears on the screen. If necessary, appropriate shooting function for the recognized scene and the number of times the shutter is released also appear.
Page 39: Cont
Light), (Night Scene using a tripod) or (Hand-held Twilight) are displayed. Image processing: Cont. Shooting, Slow Sync., Auto HDR, Daylight Sync., Slow Shutter, Hand-held Twilight Note When [Smile/Face Detect.] is set to [Off], the [Portrait], [Backlight Portrait], [Night Portrait] and [Infant] scenes are not recognized. [20] Shooting >...
Page 40: Program
Allows you to shoot with the exposure adjusted automatically (both the shutter speed and the aperture value). You can set shooting functions such as [ISO], [Creative Style] and [D-Range Opt.]. 1. Set the mode dial to P (Program Auto). 2. Set the shooting functions to your desired settings. 3.
Page 41 3. While pressing the shutter button halfway down, aim the camera at one end of the desired panoramic composition. (A) This part will not be shot. 4. Press the shutter button fully down. 5. Pan the camera to the end of the guide in the direction of the arrow on the monitor. (B) Guidance bar Note If the entire angle of the panoramic shot is not achieved within the set time, a gray area...
Page 42: Scene Selection
image may not be consistent. When the whole angle of panoramic shooting and the AE/AF locked angle are very different in brightness and focus, the shooting may not be successful. If this happens, change AE/AF locked angle and shoot again. The following situations are not suited for shooting Sweep Panorama: Moving subjects.
Page 43: Night Scene
The product shoots images continuously while the shutter button is pressed. Macro: Shoots close-ups of the subjects, such as flowers, insects, food, or small items. Landscape: Shoots the entire range of a scenery in sharp focus with vivid colors. Sunset: Shoots the red of the sunset beautifully.
Page 44: Night Portrait
Night Portrait: Shoots night scene portraits using the flash. Anti Motion Blur: Allows you to shoot indoor shots without using the flash and reduces subject blur. The product shoots burst images and combines them to create the image, reducing subject blur and noise. Note In the [Hand-held Twilight] or [Anti Motion Blur] mode, the shutter clicks 4 times and an image is recorded.
Page 45: Shutter Priority
[24] Shooting > Selecting a shooting mode Shutter Priority You can express the movement of a moving subject in various ways by adjusting the shutter speed, for example, at the instant of the movement with high speed shutter, or as a trailing image with low speed shutter.
Page 46: Manual Exposure
1. Set the mode dial to A (Aperture Priority). 2. Select the desired value by turning the front dial. Smaller F-value: The subject is in focus, but objects in front of and beyond the subject are blurred. Larger F-value: The subject and its foreground and background are all in focus. 3.
Page 47 Note When [ISO] is set to [ISO AUTO], the ISO value automatically changes to achieve the appropriate exposure using the aperture value and shutter speed you have set. If the aperture value and shutter speed you have set are not suitable for appropriate exposure, the ISO value indicator will blink.
Page 48: Multi Frame
reduction is in progress. You cannot set the shutter speed to [BULB] in the following situations: When the [Smile Shutter] function is activated. When the [Auto HDR] function is activated. When [Picture Effect] is set to [HDR Painting] or [Rich-tone Mono.]. When the [Multi Frame NR] function is activated.
Page 49: Program Auto
movies. You can also check the image angle before shooting. 1. Set the mode dial to (Movie). 2. MENU → (Camera Settings) → [Movie] → desired setting. When [Mode Dial Guide] is set to [On], you can select the desired settings after you have changed the position of the mode dial.
Page 50: The Zoom Features Available With This Product
[31] Using shooting functions > Using the zoom The zoom features available with this product The zoom feature of the product provides a higher magnification zoom by combining various zoom features. The icon displayed on the screen changes, according to the selected zoom feature.
Page 51: Zoom Setting
[Zoom]. When you use a zoom function other than the optical zoom, the [Focus Area] setting is disabled. The AF operates with priority on and around the center area. Also, [Metering Mode] is fixed to [Multi]. [32] Using shooting functions > Using the zoom Zoom Setting You can select the zoom setting of the product.
Page 52: Using Flash (Sold Separately)
[Zoom Setting]: [On：Digital Zoom] Image Size]: L Approx. 4× (Approx. 4×), M Approx. 6.1× (Approx. 5.2×), S Approx. 8× (Approx. 8×) ILCE-7 ILCE-7R Using flash (sold separately) In dark environments, use the flash to light up the subject while shooting and to prevent camera-shake.
Page 53: Flash Mode
You cannot use the flash when recording movies. While charging the flash, flashes. After charging is completed, the flashing icon will light Do not use a commercially available flash with high-voltage synchro terminals or with reverse polarity. The corners of a recorded image may be shaded, depending on the lens. [35] Using shooting functions >...
Page 54: Flash Comp
Available flash mode depends on the shooting mode. [36] Using shooting functions > Using the flash Flash Comp. Adjusts the amount of flash light in a range of –3.0 EV to +3.0 EV. Flash compensation changes the amount of flash light only. Exposure compensation changes the amount of flash light along with the change of the shutter speed and aperture.
Page 55 Display All Info. No Disp. Info. Histogram Level For viewfinder*...
Page 56: Graphic Display
* [For viewfinder] is not displayed in viewfinder mode. Some display methods are not displayed in the default settings. The displayed screen varies depending on the setting of [DISP Button]. Note Histogram is not displayed during panorama shooting. In movie mode, [For viewfinder] cannot be displayed. Hint You can select different settings for both the viewfinder and the monitor.
Page 57: For Viewfinder
Histogram: Displays the luminance distribution graphically. Level: Indicates whether the product is level in both the horizontal and front-back directions. When the product is level in both directions, the indicator turns to green. [39] Using shooting functions > Selecting a screen display mode DISP Button (Monitor) Allows you to set the screen display modes that can be selected for the monitor using...
Page 58: Image Size (Still Image)
1. MENU → (Camera Settings) → [ Image Size] → desired setting. Menu item details Image size when [ Aspect Ratio] is 3:2 ILCE-7 L: 24M 6000×4000 pixels M: 10M 3936×2624 pixels S: 6.0M 3008×2000 pixels ILCE-7R L: 36M 7360×4912 pixels M: 15M 4800×3200 pixels...
Page 59: Aspect Ratio (Still Image)
S: 2.2M 1968×1112 pixels ILCE-7R L: 13M 4800×2704 pixels M: 7.6M 3680×2072 pixels S: 3.2M 2400×1352 pixels Note When [ Quality] is set to [RAW] or [RAW & JPEG], the image size for RAW images corresponds to [L]. [41] Using shooting functions > Selecting still image size/image quality Aspect Ratio (still image) Sets the aspect ratio of still images.
Page 60 RAW: File format: RAW (Records using the RAW compression format.) Digital processing is not performed on this file format. Select this format to process images on a computer for professional purposes. The image size is fixed to the maximum size. The image size is not displayed on the screen. RAW &...
Page 61: Panorama: Direction
Standard: 3872×2160 Wide: 5536×2160 When [Panorama: Direction] is [Left] or [Right] Standard: 8192×1856 Wide: 12416×1856 [44] Using shooting functions > Selecting still image size/image quality Panorama: Direction Sets the direction to pan the camera when shooting panoramic images. 1. MENU → (Camera Settings) →...
Page 62: Manual Focus
The product locks the focus when the focus adjustment is achieved. Use [Single-shot AF] when the subject is motionless. (Continuous AF): The product continues to focus while the shutter button is pressed and held halfway down. Use this when the subject is in motion. (DMF): Allows you to use manual focus and auto focus in combination.
Page 63 Allows you to move the AF range frame to the desired point on the screen and focus on an extremely small subject in a narrow area. On the Flexible Spot shooting screen, you can change the size of the AF range finder frame by rotating the control wheel.
Page 64: Direct Manual Focus (Dmf)
When you rotate the focus ring, the focus distance is displayed on the screen. [49] Using shooting functions > Adjusting the focus Direct manual focus (DMF) You can make fine adjustments manually after the focus is locked. You can quickly focus on a subject rather than using the manual focus from the beginning. This is convenient in cases such as macro shooting.
Page 65: Focus Magnif
the control wheel. Note You cannot use [ MF Assist] when shooting movies. [51] Using shooting functions > Adjusting the focus Focus Magnifier You can check the focus by enlarging the image before shooting. 1. MENU → (Camera Settings) → [Focus Magnifier]. 2.
Page 66: Peaking
Menu item details 2 Sec (default setting): Magnifies the images for 2 seconds. 5 Sec: Magnifies the images for 5 seconds. No Limit: Magnifies the images until you press the shutter button. [53] Using shooting functions > Adjusting the focus Peaking Level Enhances the outline of in-focus ranges using a specific color in Manual Focus or Direct Manual Focus shooting.
Page 67: Peaking Color
[54] Using shooting functions > Adjusting the focus Peaking Color Sets the color used for the peaking function in Manual Focus or Direct Manual Focus shooting. 1. MENU → (Custom Settings) → [Peaking Color] → desired setting. Menu item details Red: Enhances outlines in red.
Page 68 [56] Using shooting functions > Adjusting the focus Lock-on AF (On) Maintains the focus on a moving subject automatically. 1. MENU → (Camera Settings) → [Lock-on AF] → [On]. 2. Align the target frame and the subject to be tracked, and press in the center.
Page 69 On (default setting): Adjusts focus before you press the shutter button halfway down. Off: Does not adjust focus before you press the shutter button halfway down. Note Pre-AF] is available only when an E-mount lens is mounted. [58] Using shooting functions > Adjusting the focus Eye-Start AF (still image) Sets whether or not to use autofocus when you look through an Electronic Viewfinder.
Page 70: Custom Key
During auto focus: Temporarily switches the focusing mode to manual. Adjust the focus while the AF/MF button is being held down. During manual focus: Temporarily switches the focusing mode to auto while the AF/MF button is held down, and locks the focus.
Page 71 [±0], or reset the values of all the lenses using [Clear]. Use [AF Micro Adj.] with Sony, Minolta, and Konica-Minolta lenses only. If you use [AF Micro Adj.] with other brands of lenses, the registered value may be affected. Do not perform [AF Micro Adj.] with an unsupported lens.
Page 72: Focus Settings
[62] Using shooting functions > Adjusting the focus Focus Settings Sets up the focus functions. 1. MENU → (Camera Settings) → [Focus Settings]. 2. Perform settings using the front/rear dial or control wheel. When the focus mode is set to [Autofocus]/[DMF] Front dial: Moves the focus area frame up/down.
Page 73 Off: The auto focus does not operate even if you press the shutter button halfway down. Hint When [ AF w/ shutter] is set to [Off], you can still use the [AF On] function. [64] Using shooting functions > Adjusting the focus AF On You can focus using any key instead of pressing the shutter button halfway down.
Page 74 For details on compatible lenses, visit the Sony web site in your area, or consult your Sony dealer or local authorized Sony service facility.
Page 75: Measuring The Exact Distance To The
[67] Using shooting functions > Adjusting the focus Measuring the exact distance to the subject mark shows the location of the image sensor*. When you measure the exact distance between the product and the subject, refer to the position of the horizontal line. The distance from the lens contact surface to the image sensor is about 18 mm (23/32 in.).
Page 76: Exposure Compensation Dial
If you shoot a subject in extremely bright or dark conditions, or when you use the flash, you may not be able to get a satisfactory effect. Only a value between –3.0 EV and +3.0 EV with the equivalent image brightness appears on the screen when shooting.
Page 77: Metering Mode
[70] Using shooting functions > Adjusting the exposure Metering Mode Selects the metering mode that sets which part of the screen to measure for determining the exposure. 1. MENU → (Camera Settings) → [Metering Mode] → desired setting. Menu item details Multi (default setting): Measures light on each area after dividing the total area into multiple areas and determines the proper exposure of the entire screen (Multi-pattern metering).
Page 78 than the subject and lock the exposure of the entire screen. 1. Adjust the focus on the spot at which the exposure is adjusted. 2. Switch the AF/MF/AEL switch lever to the AEL position, then press the AEL button. The exposure is locked, and (AE lock) lights up.
Page 79: Exp.comp
Does not fix the exposure when you press the shutter button halfway down. Use this mode when you want to adjust focus and exposure separately. The product keeps adjusting the exposure while shooting in [Cont. Shooting] or [Spd Priority Cont.] mode. Note When [Focus Mode] is set to [Continuous AF] and [ AEL w/ shutter] is [Off] or [Auto], the...
Page 80: Exposure Set
Menu item details Off (default setting): Does not display the zebra pattern. 70/75/80/85/90/95/100/100+: Adjusts the brightness level. Note The zebra pattern is not displayed during HDMI connection. [75] Using shooting functions > Adjusting the exposure Exposure Set. Guide You can set whether to display a guide when you change the aperture, exposure, shutter speed, or ISO.
Page 81: Exposure Step
[76] Using shooting functions > Adjusting the exposure Exposure step You can set the setting range for the shutter speed, aperture, and exposure compensation values. 1. MENU → (Camera Settings) → [Exposure step] → desired setting. Menu item details 0.3EV (default setting)/0.5EV Note Even if you set [Exposure step] to [0.5EV], the exposure value adjusted using the exposure compensation dial changes in steps of 0.3EV.
Page 82: Drive Mode
When [ISO AUTO] is selected in [Manual Exposure] shooting mode, [Dial Ev Comp] is invalid. [78] Using shooting functions > Adjusting the exposure Reset EV Comp. Sets whether to maintain the exposure value set using[Custom Settings] when you turn off the power when the exposure compensation dial position is set to “0.”...
Page 83: Bracket
Self-timer(Cont): Shoots images continuously after 10 seconds. Cont. Bracket: Shoots images while holding the shutter button down, each with different degrees of brightness. Single Bracket: Shoots a specified number of images, one by one, each with a different degree of brightness. WB bracket: Shoots a total of three images, each with a different degree of brightness according to the selected settings for white balance, color temperature and color filter.
Page 84 The exposure setting for the first shot is used for subsequent shots. Set [ AEL w/ shutter] to [Auto] or [Off]. ILCE-7: When [Focus Mode] is set to [Continuous AF], both the exposure and the focus are maintained using the Phase Detection AF function.
Page 85 shutter button. [83] Using shooting functions > Selecting a drive mode (Continuous shooting/Self-timer) Self-timer(Cont) Continuously shoots the number of images you have set after 10 seconds. You can choose the best shot from several shots taken. 1. MENU → (Camera Settings) → [Drive Mode] → [Self-timer(Cont)]. 2.
Page 86 Menu item details Cont. Bracket: 0.3EV 3 Image (default setting): This setting shoots three images continuously with an exposure value shifted by plus or minus 0.3 EV. Cont. Bracket: 0.3EV 5 Image: This setting shoots five images continuously with an exposure value shifted by plus or minus 0.3 EV.
Page 87: Single Bracket
[85] Using shooting functions > Selecting a drive mode (Continuous shooting/Self-timer) Single Bracket Shoots multiple images while automatically shifting the exposure from base to darker and then to lighter. Press the shutter button for each image. You can select an image that suits your purpose after recording.
Page 88 Single Bracket: 2.0EV 3 Image: This setting shoots a total of three images in a row with an exposure value shifted by plus or minus 2.0 EV. Single Bracket: 3.0EV 3 Image: This setting shoots a total of three images in a row with an exposure value shifted by plus or minus 3.0 EV.
Page 89 (Continuous shooting/Self-timer) DRO Bracket You can record a total of three images, each at a different degree of D-Range Optimizer value. 1. MENU → (Camera Settings) → [Drive Mode] → [DRO Bracket]. 2. Select the desired mode using the right/left side of the control wheel. Menu item details DRO Bracket: Lo (default setting): Records a series of three images with small changes in the D-Range Optimizer value.
Page 90: Multi Frame Nr
sensitivity Sensitivity to light is expressed by the ISO number (recommended exposure index). The larger the number, the higher the sensitivity. 1. MENU → (Camera Settings) → [ISO] → desired setting. Menu item details Multi Frame NR: Combines continuous shots to create an image with less noise. ISO AUTO (default setting): Sets the ISO sensitivity automatically.
Page 91 sensitivity Multi Frame NR The product automatically shoots multiple images continuously, combines them, reduces the noise, and records them as one image. With multi frame noise reduction, you can select larger ISO numbers than the maximum ISO sensitivity. The image recorded is one combined image. 1.
Page 92: Auto Hdr
Corrects the brightness automatically. D-Range Optimizer: Lv1 ― D-Range Optimizer: Lv5: Optimizes the gradation of a recorded image for each divided area. Select the optimization level from Lv1 (weak) to Lv5 (strong). Note [DRO/Auto HDR] is fixed to [Off] when the shooting mode is set to [Sweep Panorama], or when [Multi Frame NR] or [Picture Effect] is used.
Page 93: White Balance
[Auto HDR] is not available for RAW images. When the exposure mode is set to [Intelligent Auto], [Superior Auto], [Sweep Panorama] or [Scene Selection], you cannot select [Auto HDR]. When [Multi Frame NR] is selected, you cannot select [Auto HDR]. You cannot start the next shot until the capture process is completed after you shoot.
Page 94: Capturing A Basic White Color In [Custom Setup]
Fluor.: Cool White: The color temperature is adjusted for white fluorescent lighting. Fluor.: Day White: The color temperature is adjusted for neutral white fluorescent lighting. Fluor.: Daylight: The color temperature is adjusted for daylight fluorescent lighting. Flash: The color temperature is adjusted for flash light. Underwater Auto: The color temperature is adjusted for underwater shooting.
Page 95: Picture Effect
1. MENU → (Camera Settings) → [White Balance] → [Custom Setup]. 2. Hold the camera/camcorder so that the white area fully covers the AF area located in the center, and then press on the center of the control wheel. The calibrated values (Color Temperature and Color Filter) are displayed. 3.
Page 96: Soft Focus
Soft High-key: Creates an image with the indicated atmosphere: bright, transparent, ethereal, tender, soft. Partial Color: Creates an image which retains a specific color, but converts others to black and white. High Contrast Mono.: Creates a high-contrast image in black and white. Soft Focus: Creates an image filled with a soft lighting effect.
Page 97: Creative Style
[Rich-tone Mono.] [Miniature] [Watercolor] [Illustration] In the case of [HDR Painting] and [Rich-tone Mono.], the shutter is released three times for one shot. Be careful about the following: Use this function when the subject is motionless or does not flash light. Do not change the composition before shooting.
Page 98 the subject. Light: For shooting images with bright and simple colors, suitable for capturing a refreshingly light ambience. Portrait: For shooting the skin color in a soft tone, ideally suited for shooting portraits. Landscape: The saturation, contrast, and sharpness are heightened for shooting vivid and crisp scenery. Distant landscapes also stand out more.
Page 99 Note [Standard] is selected when using the following functions: [Intelligent Auto] [Superior Auto] [Scene Selection] [Picture Effect] When [Creative Style] is set to [Black & White] or [Sepia], [Saturation] cannot be adjusted. [97] Using shooting functions > Recording movies File Format (movie) Selects the movie file format.
Page 100 60i/50i: Movies are recorded at approximately 60 fields/sec (for 1080 60i-compatible devices) or 50 fields/sec (for 1080 50i-compatible devices), in interlaced mode, with Dolby Digital audio, in AVCHD format. 24p/25p: Movies are recorded at approximately 24 frames/sec (for 1080 60i-compatible devices) or 25 frames/sec (for 1080 50i-compatible devices), in progressive mode, with Dolby Digital audio, in AVCHD format.
Page 101: Audio Recording
File Format]:[MP4] 1440×1080 12M (default setting): Records movies of 1440 × 1080. Bit-rate: Average 12 Mbps VGA 3M: Records movies of VGA size. Bit-rate: Average 3 Mbps * 1080 60i (NTSC) compatible device ** 1080 50i (PAL) compatible device Note 60p/50p movies can be played back only on compatible devices.
Page 102: Audio Rec
[100] Using shooting functions > Recording movies Audio Level Display Sets whether to display the audio level on the screen. (Custom Settings) → [Audio Level Display] → desired setting. 1. MENU→ Menu item details On (default setting): Displays the audio level. Off: Does not display the audio level.
Page 103: Audio Out
Reset: Resets the audio recording level to the default setting. Note Regardless of the [Audio Rec Level] settings, the limiter always operates. [Audio Rec Level] is available only when the shooting mode is set to Movie. The [Audio Rec Level] settings are applied for both the internal microphone and the (Microphone) terminal input.
Page 104 1. MENU → (Camera Settings) → [Wind Noise Reduct.] → desired setting. Menu item details Reduces wind noise. Off (default setting): Does not reduce wind noise. Note Setting this item to [On] where wind is not blowing sufficiently hard may cause normal sound to be recorded with too low volume.
Page 105: Mode Dial
[105] Using shooting functions > Recording movies MOVIE Button Sets whether or not to activate the MOVIE button. 1. MENU → (Custom Settings) → [MOVIE Button] → desired setting. Menu item details Always (default setting): Starts movie recording when you press the MOVIE button in any mode. Movie Mode Only: Starts movie recording when you press the MOVIE button only if the shooting mode is set to [Movie] mode.
Page 106: Function Menu Set
Note Program Shift cannot be registered. For some functions, the position of the dial and the setting actually used for shooting may not match. If this happens, shoot images by referring to the information displayed on the monitor. [107] Using shooting functions > Customizing the shooting functions for convenient use Function Menu Set.
Page 107: Function Of The Ael
functions for convenient use Function of the control wheel Once you assign a function to the control wheel, you can perform that function by simply turning the wheel when the shooting information screen is displayed. 1. MENU → (Custom Settings) → [Custom Key Settings] → [Control Wheel] → desired setting.
Page 108: Function Of The Custom
The functions that can be assigned are displayed on the setup item selection screen. [112] Using shooting functions > Customizing the shooting functions for convenient use Function of the Custom button Once you assign a function to the Custom button, you can perform that function by simply pressing the Custom button when the shooting information screen is displayed.
Page 109: Function Of The Right
Once you assign a function to the left button, you can perform that function by simply pressing the left button when the shooting information screen is displayed. 1. MENU → (Custom Settings) → [Custom Key Settings] → [Left Button] → desired setting.
Page 110: Dial Setup
[117] Using shooting functions > Customizing the shooting functions for convenient use Dial Setup You can switch the functions of the front/rear dial. 1. MENU → (Custom Settings) → [Dial Setup] → desired setting. Menu item details F/no.: The front dial is used to change the shutter speed and the rear dial to change the aperture value.
Page 111 Automatically detects and shoots a smile. Face Detection frame When the product detects a face, the gray face detection frame appears. When the product determines that autofocus is enabled, the face detection frame turns white. When you press the shutter button halfway down, the frame turns green. When the product detects two or more faces, it selects the face to be adjusted with higher priority and the face detection frame over that face turns white.
Page 112 [119] Using shooting functions > Setting the other functions of this product Soft Skin Effect (still image) Sets the effect used for shooting the skin smoothly in the [Face Detection] function. 1. MENU → (Camera Settings) → [ Soft Skin Effect] → desired setting. Menu item details Off (default setting): Does not use the [...
Page 113: Red Eye Reduction
[121] Using shooting functions > Setting the other functions of this product Face Registration (Order Exchanging) When multiple faces are registered to be given priority, the face registered first will be given priority. You can change the priority order. 1. MENU → (Custom Settings) →...
Page 114: Live View
When using the flash, it is fired two or more times before shooting to reduce the red-eye phenomenon. 1. MENU → (Camera Settings) → [Red Eye Reduction] → desired setting. Menu item details The flash is always fired to reduce the red-eye phenomenon. Off (default setting): Does not use Red Eye Reduction.
Page 115 Menu item details Off (default setting): Does not trim images. Auto: Automatically trims images into an appropriate composition. Note The trimmed image may not be the best possible composition, depending on the shooting conditions. [125] Using shooting functions > Setting the other functions of this product SteadyShot Sets whether or not to use the SteadyShot function.
Page 116 When you set the shutter speed to one second or longer (long exposure shooting), noise reduction is turned on for the duration that the shutter is open. With the function turned on, the grainy noise typical of long exposures is reduced. 1.
Page 117: Grid
functions of this product Color Space (still image) The way colors are represented using combinations of numbers or the range of color reproduction is called “color space.” You can change the color space depending on the purpose of the image. 1.
Page 118: Auto Review
Place main subjects close to one of the grid lines that divide the image into thirds for a well- balanced composition. Square Grid: Square grids make it easier to confirm the horizontal level of your composition. This is suitable to determine the quality of the composition when shooting landscape, close-up, or duplicated images.
Page 119 functions of this product Live View Display Sets whether or not to show images altered with effects of the exposure compensation, white balance, [Creative Style], or [Picture Effect] on the screen. 1. MENU → (Custom Settings) → [Live View Display] → desired setting. Menu item details Setting Effect ON (default setting): Displays Live View in conditions close to what your picture will look like as a result of applying...
Page 120: Release W/O
1. MENU → (Custom Settings) → [FINDER/MONITOR] → desired setting. Menu item details Auto (default setting): When you look into the Electronic Viewfinder, the display is switched to the Electronic Viewfinder automatically. Viewfinder: The screen is turned off and the image is always displayed in the Electronic Viewfinder. Monitor: The Electronic Viewfinder is turned off and the image is always displayed on the screen.
Page 121 Curtain Shut. (ILCE-7) The electronic front curtain shutter function shortens the time lag between shutter releases. 1. MENU → (Custom Settings) → [e-Front Curtain Shut.] → desired setting. Menu item details On (default setting): Uses the electronic front curtain shutter function.
Page 122 Even if you set [S. Auto Img. Extract.] to [Off] with [Hand-held Twilight] selected as the scene recognition mode, one combined image is saved. When the [ Auto Obj. Framing] function is activated, two images are saved even if you set [S.
Page 123: Distortion Comp
Menu item details Auto (default setting): Compensates for darker corners of the screen automatically. Off: Does not compensate for darker corners of the screen. Note The [Shading Comp.] function is only available when an E-mount lens is mounted. The amount of light around the edges may not be corrected, depending on the lens type. [138] Using shooting functions >...
Page 124: Dial / Wheel
1. MENU → (Custom Settings) → [Lens Comp.] → [Distortion Comp.] → desired setting. Menu item details Auto: Compensates for distortion of the screen automatically. Off (default setting): Does not compensate for distortion of the screen. Note The [Distortion Comp.] function is only available when an E-mount lens is mounted. Depending on the attached lens, [Distortion Comp.] is fixed to [Auto], and you cannot select [Off].
Page 125: Deactivate
functions of this product Deactivate Monitor When you press the key to which the [Deactivate Monitor] function is assigned, the monitor display is turned off. 1. MENU → (Custom Settings) → [Custom Key Settings] → set the [Deactivate Monitor] function to the desired key. 2.
Page 126: Recover Image
Shot. Result Preview With the monitor or viewfinder, you may see an image with an aperture that differs from the shooting result. Since the blurring of a subject changes if the aperture is changed, the blurriness of the actual picture will differ from the image you were viewing prior to shooting. While pressing down the key to which [Shot.
Page 127: Playback Zoom
[145] Viewing > Viewing still images Playback zoom Enlarges the image being played back. 1. Display the image you want to enlarge, and then select If the image is too large, press the button to adjust the zoom scale. 2. Select the portion you want to enlarge by pressing the top/bottom/right/left side of the control wheel.
Page 128: Deleting A Displayed
switch View Mode by selecting an icon. [147] Viewing > Viewing still images Switching the screen display (during playback) Switches the screen display. 1. Press the DISP (Display Setting) button. The screen display switches in the order “Display Info. → Histogram → No Disp. Info. →...
Page 129: Playing Back Movies
[149] Viewing > Deleting images Deleting multiple selected images You can delete multiple selected images. 1. MENU → (Playback) → [Delete] → desired setting. Menu item details Multiple Img.: Deletes the selected images. (1) Select the images to be deleted, then press on the center of the control wheel.
Page 130: Playing Back Panoramic Images
: Fast-forward : Fast-rewind : Forward slow playback : Reverse slow playback : Next movie file : Previous movie file : Displays the next frame : Displays the previous frame : Sound volume adjustment : Closes the operation panel Hint “Forward slow playback,”...
Page 131: Specify
[152] Viewing > Printing Specify Printing You can specify in advance on the memory card which still images you want to print out later. 1. MENU → (Playback) → [Specify Printing] → desired setting. Menu item details Multiple Img.: Selects images to order printing. (1) Select an image and press on the center of the control wheel.
Page 132: Playing Back
Date View: Displays the images by date. Folder View(Still): Displays only still images. Folder View(MP4): Displays only MP4-format movies. AVCHD View: Displays only AVCHD-format movies. [154] Viewing > Using viewing functions Display Rotation Selects the orientation when playing back recorded still images. 1.
Page 133 2. Select [Enter]. Menu item details Repeat: Select [On], in which images are played back in a continuous loop, or [Off] (default setting), in which the product exits the slideshow when all the images are played back once. Interval: Select the display interval for images from among [1 Sec], [3 Sec] (default setting), [5 Sec], [10 Sec] or [30 Sec].
Page 134: K Still Image Pb
[157] Viewing > Using viewing functions Protect Protects recorded images against accidental erasure. The mark is displayed on protected images. 1. MENU → (Playback) → [Protect] → desired setting. Menu item details Multiple Img.: Applies or cancels the protection of the selected multiple images. (1) Select the image to be protected, then press on the center of the control wheel.
Page 135: Viewing Images On An Hd
3. Turn on the TV and switch the input. 4. Turn on this product and press the (Playback) button to switch to playback mode. 5. MENU → (Playback) → [4K Still Image PB] → [OK]. Note This menu is only available with 4K-compatible TVs. For details, refer to the operating instructions of the TV.
Page 136: Viewing Images On A "Bravia" Sync-Compatible
Images shot with the product appear on the TV screen. Hint This product is compatible with the “PhotoTV HD” standard. If you connect Sony PhotoTV HD-compatible devices using an HDMI cable (sold separately), the TV is set to the image quality suitable for viewing still images, and a whole new world of photos can be enjoyed in breathtaking high quality.
Page 137: Ctrl For
1. Turn off both this product and the TV. 2. Connect the HDMI jack of the product to the HDMI jack of the TV using an HDMI cable (sold separately). 3. Turn on the TV and switch the input. 4. Turn on this product, and then press the (Playback) button to select playback mode.
Page 138: Viewfinder Bright
[162] Changing settings > Setup menu Viewfinder Bright. When using an electronic viewfinder, this product adjusts the brightness of the electronic viewfinder. 1. MENU → (Setup) → [Viewfinder Bright.] → desired setting. Menu item details Auto (default setting): Adjusts the brightness of the electronic viewfinder automatically. Manual: Selects the brightness of the electronic viewfinder from the range –2 to +2.
Page 139: Volume
1. MENU → (Setup) → [Volume Settings] → desired setting. Adjusting the volume during playback Press the bottom of the control wheel while playing back movies to display the operation panel, then adjust the volume. You can adjust the volume while listening to the actual sound. [165] Changing settings >...
Page 140 Enables the upload function. Off: Disables the upload function Communication status screen display : Standby. No images are to be sent. : Upload standby. : Connecting. : Uploading. : Error Note Eye-Fi cards are only sold in certain countries/regions. For more information on Eye-Fi cards, please contact the manufacturer or vendor directly. Eye-Fi cards can be used only in the countries/regions where they were purchased.
Page 141: Mode Dial Guide
Off (default setting): Deactivates the Tile Menu display. [168] Changing settings > Setup menu Mode Dial Guide You can display the description of a shooting mode when you turn the mode dial and change the settings available for that shooting mode. 1.
Page 142: Pwr Save Start
[170] Changing settings > Setup menu Display Quality You can change the display quality. 1. MENU → (Setup) → [Display Quality] → desired setting. Menu item details High: Displays in high quality. Standard: Displays in standard quality. Note When [High] is set, battery consumption will be higher than when [Standard] is set. [171] Changing settings >...
Page 143: Cleaning
[172] Changing settings > Setup menu PAL/NTSC Selector Plays back movies recorded with the product on a PAL/NTSC system TV. 1. MENU → (Setup) → [PAL/NTSC Selector] → [Enter] Note This function is provided with 1080 50i-compatible devices only. It is not provided with 1080 60i-compatible devices.
Page 144: Demo
Do not put the tip of a blower into the cavity beyond the lens mount area, so that the tip of the blower does not touch the image sensor. Hold the camera slightly face downward so that the dust falls out. Do not subject the product to any shock during cleaning.
Page 145: Hdmi Resolution
You can operate this product and shoot images using the SHUTTER button, 2SEC button (2 second delay shutter), and START/STOP button (or Movie button (RMT-DSLR2 only)) on the RMT-DSLR1 Wireless Remote Commander (sold separately) and RMT-DSLR2 (sold separately). Refer also to the operating instructions for the Wireless Remote Commander. 1.
Page 146: Hdmi Info
If the images are not displayed properly using the [Auto] setting, select either [1080i] or [1080p], based on which TV is to be connected. [177] Changing settings > Setup menu CTRL FOR HDMI When connecting this product to a “BRAVIA” Sync-compatible TV using an HDMI cable (sold separately), you can operate this product by aiming the TV remote control at the TV.
Page 147: Usb Connection
[179] Changing settings > Setup menu USB Connection Selects the appropriate USB connection method for each computer or USB device connected to this product. 1. MENU → (Setup) → [USB Connection] → desired setting. Menu item details Auto (default setting): Establishes a Mass Storage or MTP connection automatically, depending on the computer or other USB devices to be connected.
Page 148: Date/Time
1. MENU → (Setup) → [USB LUN Setting] → desired setting. Menu item details Multi (default setting): Normally, use [Multi]. Single: Set [USB LUN Setting] to [Single] only if you cannot make a connection. [181] Changing settings > Setup menu Language Selects the language to be used in the menu items, warnings and messages.
Page 149: Area
[183] Changing settings > Setup menu Area Setting Sets the area where you are using the product. 1. MENU → (Setup) → [Area Setting] → desired area. [184] Changing settings > Setup menu Format Formats (initializes) the memory card. When you use a memory card with this product for the first time, it is recommended that you format the card using the product for stable performance of the memory card.
Page 150: Select Rec
(If there is a larger file number on the new memory card than the latest image file, a number one higher than the largest number is assigned.) Reset: The product resets numbers when a file is recorded in a new folder and assigns numbers to files starting with “0001.”...
Page 151: Folder Name
[188] Changing settings > Setup menu Folder Name Still images you shoot are recorded in a folder that is automatically created under the DCIM folder on the memory card. You can change the way folder names are assigned. 1. MENU → (Setup) →...
Page 152: Display Media Info
[190] Changing settings > Setup menu Display Media Info. Displays the recordable time of movies and the number of recordable still images for the inserted memory card. 1. MENU → (Setup) → [Display Media Info.]. [191] Changing settings > Setup menu Version Displays the version of this product, lens and Mount Adaptor.
Page 153: Connecting An Android Smartphone To This
If “PlayMemories Mobile” is already installed on your smartphone, be sure to update it to the latest version. For details on “PlayMemories Mobile,” refer to the support page (http://www.sony.net/pmm/). [194] Using Wi-Fi functions > Connecting this product and a Smartphone Connecting an Android smartphone to this product 1.
Page 154: Connecting The Product To An Iphone Or
3. Input the password that is displayed on this product. The smartphone is connected to the product. [195] Using Wi-Fi functions > Connecting this product and a Smartphone Connecting the product to an iPhone or iPad 1. Select the model name of this product (DIRECT-xxxx: xxxx) on the Wi-Fi setting screen of your iPhone or iPad.
Page 155 2. Input the password displayed on this product. The iPhone or iPad is connected to the product. 3. Confirm that your iPhone or iPad was connected to the “SSID” shown on this product. 4. Return to the “Home” screen and launch “PlayMemories Mobile.”...
Page 156: Smart Remote Embedded
[196] Using Wi-Fi functions > Connecting this product and a Smartphone One-touch(NFC) You can call up a desired application from the application menu of this product by touching an NFC-enabled Android smartphone to the product. If the application you call up has a feature that works with the smartphone, the product and the smartphone will be connected via Wi-Fi.
Page 157: Ssid/Pw
2. When the product is ready for the connection, an information screen appears on the product. Connect the smartphone and the product using that information. Connection setting methods differ among smartphones. 3. Check the composition of the image on the smartphone screen, and then press the shutter button (A) on the smartphone to shoot an image.
Page 158: Airplane
1. Activate the NFC function of the smartphone. 2. Switch this product to shooting mode. The NFC function is available only when the (N mark) is displayed on the screen. 3. Touch the product to the smartphone. The smartphone and the product are connected, and “PlayMemories Mobile” launches on the smartphone.
Page 159: Send To Smartphone
[199] Using Wi-Fi functions > Transferring images to a Smartphone Send to Smartphone You can transfer still images to a smartphone and view them. Download the application “PlayMemories Mobile” to your smartphone from the application store. 1. MENU → (Wireless) → [Send to Smartphone] → desired setting. If you press the (Send to Smartphone) button in playback mode, the setting screen for [Send to Smartphone] will appear.
Page 160: Touch Sharing
Some images may not be displayed on the smartphone depending on the recording format. RAW images are converted to JPEG format when they are sent. You cannot send AVCHD format movies. This product shares the connection information for [Send to Smartphone] with a device that has permission to connect.
Page 161: Send To Computer
Touch the smartphone to the product for 1-2 seconds until “PlayMemories Mobile” launches. To transfer two or more images, select MENU → (Wireless) → [Send to Smartphone] to select images. After the connection enabled screen appears, use NFC to connect the product and the smartphone. About “NFC”...
Page 162: Slideshow Settings
point on the product. 1. Start your computer. 2. MENU → (Wireless) → [Send to Computer]. Note Depending on the application settings of your computer, the product will turn off after saving the images to your computer. You can transfer images from the product to only one computer at a time. If you want to transfer images to another computer, connect the product and the computer via a USB connection and follow the instructions in “PlayMemories Home.”...
Page 163: Airplane Mode
You can change the slideshow settings by pressing the bottom side of the control wheel. Playback Selection: Selects the group of images to be shown. Folder View(Still): Selects from [All] and [All in Folder]. Date View: Selects from [All] and [All in Date Rng.]. Interval: Selects from [Short] and [Long].
Page 164: Access Point Set
Fi functions WPS Push If your access point has the WPS button, you can register the access point to this product easily by pushing the WPS button. 1. MENU → (Wireless) → [WPS Push]. 2. Press the WPS button on the access point you want to register. Note [WPS Push] works only if the security setting of your access point is set to WPA or WPA2 and your access point supports the WPS button method.
Page 165 When the desired access point is displayed on the screen: Select the desired access point. When the desired access point is not displayed on the screen: Select [Manual Setting] and set the access point. For the input method, refer to “How to use the keyboard.”...
Page 166: Edit Device
displayed. For example: If you want to enter “abd” once to display “a” → select “ Select the key for “abc” and press ”((5) Move → select the key for “abc” and press twice to display “b” → cursor) and press select the key for “def”...
Page 167: Disp Mac
For input method, refer to “How to use the keyboard.” [207] Using Wi-Fi functions > Changing the settings of Wi- Fi functions Disp MAC Address Displays the MAC address of this product. 1. MENU → (Wireless) → [Disp MAC Address]. [208] Using Wi-Fi functions >...
Page 168: Opening A Service Account
Recommended computer environment For details on the recommended computer environments for downloading an application and adding functions to the product, use to the following URL: “PlayMemories Camera Apps” website (www.sony.net/pmca) [212] Adding applications to the product > Installing the applications Opening a service account You can open a service account, which is required to download applications.
Page 169: Downloading Applications
1. Access the application download website. http://www.sony.net/pmca 2. Follow the instructions on the screen and acquire a service account. Follow the instructions on the screen to download the desired application to the product. [213] Adding applications to the product > Installing the...
Page 170: Launching The Downloaded Application
You can download applications using the Wi-Fi function without connecting to a computer. 1. MENU → (Application) → Application List → (PlayMemories Camera Apps), then follow the instructions on the screen to download applications. Acquire a service account in advance. Note When the IP address setting of this product is [Manual], you cannot download an application.
Page 171 3. Select the destination. Confirming the account information of “PlayMemories Camera Apps” The account information for the “Sony Entertainment Network” that is registered on the product is displayed. 1. MENU → (Application) → Application List → [Application Management] → [Display...
Page 172: Recommended Computer Environment
[218] Viewing on computers > Recommended computer environment Recommended computer environment The following computer environment is recommended when using the software “PlayMemories Home,” “Image Data Converter” and “Remote Camera Control.” Windows OS (pre-installed): Windows Vista SP2*/Windows 7 SP1/Windows 8 “PlayMemories Home” CPU: Intel Pentium III 800 MHz or faster (For playing/editing the High Definition movies: Intel Core Duo 1.66 GHz or faster/Intel Core 2...
Page 173: Playmemories Home
Hard Disk (Disk space required for installation): 100 MB Display: At least 1024 × 768 dots “Image Data Converter”/“Remote Camera Control” Memory: At least 1 GB of memory is recommended. Display: At least 1024 × 768 dots Note Operation is not assured in an environment based on an upgrade of the operating systems described above or in a multi-boot environment.
Page 174: Software For Mac Computers
1. Using the Internet browser on your computer, go to the following URL, then click [Install] → [Run]. www.sony.net/pm/ If “PMB” (Picture Motion Browser) supplied with a product that was purchased before 2011 has already been installed on the computer, “PMB” will be overwritten by “PlayMemories Home.”...
Page 175: Image Data Converter
You can rank images in five grades. You can apply color labels. Installing “Image Data Converter” 1. Download and install the software by accessing the following URL (English only). http://www.sony.co.jp/ids-se/ Note Log on as Administrator. Accessing “Image Data Converter Guide”...
Page 176: Remote Camera Control
[Help] from the menu bar → [Image Data Converter Guide]. For details on operation, you can also refer to the “Image Data Converter” support page (English only). http://www.sony.co.jp/ids-se/ “Remote Camera Control” When using “Remote Camera Control,” the following operations are available on your computer.
Page 177: Connecting The Product To A Computer
For Windows 8, start [Remote Camera Control Ver.3], and select [Help] from the menu bar → [Remote Camera Control Help Guide]. Mac: Finder → [Applications] → [Remote Camera Control] → [Remote Camera Control Ver.3], and select [Help] from the menu bar → [Remote Camera Control Help Guide]. [220] Viewing on computers >...
Page 178: Disconnecting The Product From The Computer
Do not edit or otherwise process AVCHD movie files/folders from the connected computer. Movie files may be damaged or become unplayable. Do not delete or copy AVCHD movies on the memory card from the computer. Sony is not held liable for consequences resulting from such operations via the computer.
Page 179: Disc Type
(HD) disc is created. You can play a high definition image quality (HD) disc on AVCHD format playback devices, such as a Sony Blu-ray Disc player and a PlayStation®3. You cannot play the disc on ordinary DVD players.
Page 180: Selecting The Disc Creation Method
Home.” (Only for Windows) Creates a disc with high-definition image quality (HD) Writable movie format: PS, FX, FH Player: Blu-ray Disc playback devices (Sony Blu-ray Disc player, PlayStation®3, etc.) Creates a disc with high-definition image quality (HD) (AVCHD recording disc) Writable movie format: PS*, FX*, FH Player: AVCHD format playback devices (Sony Blu-ray Disc player, PlayStation®3, etc.)
Page 181: Creating Blu-Ray Discs
Multi-session recordings cannot be made. To create Blu-ray Discs using “PlayMemories Home,” be sure to install the dedicated add-on software. For details, see the following URL: http://support.d-imaging.sony.co.jp/BDUW/ To install, your computer must be connected to the Internet. For detailed operations, see the Help of “PlayMemories Home.”...
Page 182 [227] Precautions/This product > Precautions Precautions Backing up memory cards Data may be corrupted in the following cases. Be sure to back up the data for protection. When the memory card is removed or the product is turned off during a read or write operation.
Page 183 product. If moisture condensation occurs, turn off the product and wait about an hour for the moisture to evaporate. Note that if you attempt to shoot with moisture remaining inside the lens, you will be unable to record clear images. On the functions available with the product This manual describes the functions of 1080 60i-compatible devices and 1080 50i-compatible devices.
Page 184: On The Internal Rechargeable Battery
These points are normal in the manufacturing process and do not affect the images in any way. Exposing the monitor or lens to direct sunlight for long periods may cause a malfunction. Exercise caution when placing the product near a window or outdoors. Do not press against the monitor.
Page 185: Notes On The Battery Pack
Notes on the battery pack Charging the battery pack Charge the battery pack (supplied) before using the product for the first time. The charged battery pack will discharge little by little even if you do not use it. Charge the battery pack each time before you use the product so that you do not miss any opportunities to shoot images.
Page 186 If the battery terminal is dirty, you may not be able to turn on the product or the battery pack may not be properly charged. In that case, clean the battery by lightly wiping off any dust using a soft cloth or a cotton swab. Remaining battery indicator The remaining battery indicator appears on the screen.
Page 187: Memory Card
The supplied AC Adaptor is dedicated to this product. Do not connect with other electronic devices. Doing so may cause a malfunction. Make sure to use a genuine Sony AC Adaptor. If the product's Charge lamp flashes while charging, remove the battery pack being charged, and then insert the same battery pack firmly back into the product.
Page 188 (“Memory Stick PRO-HG Duo” media) Class 4 SD card or faster Note When you use a memory card with this product for the first time, it is recommended that you format the card using the product for stable performance of the memory card before shooting.
Page 189: Cleaning The Lens
“Memory Stick PRO Duo” media: *1*2*3 “Memory Stick PRO-HG Duo” media: *1*2 “Memory Stick XC-HG Duo” media: *1*2 This “Memory Stick” is equipped with MagicGate function. MagicGate is copyright protection technology that uses encryption technology. Data recording/playback that requires MagicGate functions cannot be performed with this product.
Page 190: Number Of Still Images
Number of still images The number of still images may vary depending on the shooting conditions and the memory card. ILCE-7 Image Size]: [L: 24M] When [ Aspect Ratio] is set to [3:2]* Standard...
Page 191 Extra fine 2GB: 105 images 4GB: 215 images 8GB: 435 images 16GB: 870 images 32GB: 1700 images 64GB: 3450 images RAW & JPEG 2GB: 54 images 4GB: 105 images 8GB: 215 images 16GB: 435 images 32GB: 870 images 64GB: 1750 images 2GB: 74 images 4GB: 145 images 8GB: 295 images...
Page 192: Recordable Time Of Movies
32GB: 1250 images 64GB: 2500 images RAW & JPEG 2GB: 37 images 4GB: 75 images 8GB: 150 images 16GB: 300 images 32GB: 610 images 64GB: 1200 images 2GB: 50 images 4GB: 99 images 8GB: 200 images 16GB: 405 images 32GB: 810 images 64GB: 1600 images When the [ Aspect Ratio] is set to other than [3:2], you can record more pictures than shown...
Page 193 4GB: 20 m 8GB: 40 m 16GB: 1 h 30 m 32GB: 3 h 64GB: 6 h 60i 17M(FH) 50i 17M(FH) 2GB: 10 m 4GB: 30 m 8GB: 1 h 16GB: 2 h 32GB: 4 h 5 m 64GB: 8 h 15 m 60p 28M(PS) 50p 28M(PS) 2GB: 9 m...
Page 194: Plug Adaptor
64GB: 11 h VGA 3M 2GB: 1 h 10 m 4GB: 2 h 25 m 8GB: 4 h 55 m 16GB: 10 h 32GB: 20 h 64GB: 40 h Continuous shooting is possible for approximately 29 minutes for each shooting (limited by product specifications).
Page 195: Mount Adaptor
For details, refer to the operating instructions supplied with the Mount Adaptor. Note You may not be able to use the Mount Adaptor with certain lenses. Consult your Sony dealer or local authorized Sony service facility on compatible lenses. You cannot use the AF illuminator when using an A-mount lens.
Page 196: La-Ea1 Mount Adaptor
When an A-mount lens is attached, the autofocus speed will be slower than when an E-mount lens is attached. (Approximately two to seven seconds slower (for shooting based on the Sony measurement conditions). This may vary depending on conditions such as subject and brightness during shooting.) When using a Mount Adaptor, the Auto Focus does not work in movie mode.
Page 197: La-Ea3 Mount Adaptor
When an A-mount lens is attached, the autofocus speed will be slower than when an E-mount lens is attached. (Approximately two to seven seconds slower (for shooting based on the Sony measurement conditions). This may vary depending on conditions such as subject and brightness during shooting.).
Page 198: La-Ea4 Mount Adaptor
The iris (aperture) is not automatically adjusted in movie mode. Adjust the iris (aperture) manually. Available focus area When the LA-EA3 Mount Adaptor is mounted, the available focus areas are the same as for the available settings of this camera. [241] Precautions/This product >...
Page 199: Avchd Format
Vertical grip You can attach a VG-C1EM vertical grip (sold separately) to this product and record vertically oriented images. When attaching the vertical grip, remove the battery cover in advance. For details, refer to the operating instructions for the vertical grip. How to remove the battery cover Press the attaching/removing lever of this product while pulling the battery cover aside.
Page 200 GPL/LGPL. Source code is provided on the web. Use the following URL to download it. http://www.sony.net/Products/Linux/ We would prefer you do not contact us about the contents of source code.
Page 201 Storage connection between the product and a computer to read licenses in the “PMHOME” - “LICENSE” folder. [245] Precautions/This product > Trademarks Trademarks The following marks are trademarks of Sony Corporation. , “Memory Stick”, , “Memory Stick PRO”, , “Memory Stick Duo”, “Memory Stick PRO Duo”,...
Page 202: You Cannot Insert The Battery Pack Into The Product
DLNA and DLNA CERTIFIED are trademarks of Digital Living Network Alliance. “PlayStation” is a registered trademark of Sony Computer Entertainment Inc. Eye-Fi is a trademark of Eye-Fi Inc. In addition, system and product names used in this manual are, in general, trademarks or registered trademarks of their respective developers or manufacturers.
Page 203: You Cannot Turn On The Product
You cannot turn on the product. After inserting the battery pack into the product, it may take a few moments for the product to power up. Make sure that the battery pack is inserted correctly. The battery pack will discharge by itself even if you do not use it. Charge the battery pack before use.
Page 204: The Battery Pack Is Not Charged
Make sure that the battery is NP-FW50. When you charge a battery pack that has not been used for a long time, the charge lamp on the product may flash in rare cases. If this happens, remove the battery pack and re-insert it. [252] Troubleshooting >...
Page 205: Recording Takes A Long Time
[255] Troubleshooting > Shooting still images/movies Recording takes a long time. The noise reduction function is processing an image. This is not a malfunction. You are shooting in RAW mode. Since RAW data files are large, RAW mode shooting may take time.
Page 206: The Image Colors Are Not Correct
Set the correct date and time. The area selected using [Area Setting] differs from the actual area. Select the actual area. [259] Troubleshooting > Shooting still images/movies The aperture value and/or shutter speed and/or metering indicator flashes. The subject is too bright or too dark to shoot using the current aperture value and/or shutter speed settings.
Page 207: Dots Appear And Remain On The Screen
Set [Red Eye Reduction] to [On]. Shoot the subject at a distance closer than the flash range using the flash. Light the room and shoot the subject. [263] Troubleshooting > Shooting still images/movies Dots appear and remain on the screen. This is not a malfunction.
Page 208: The Image Is Blurred
Attach a lens hood. [267] Troubleshooting > Shooting still images/movies The corners of the picture are too dark. If any filter or hood is used, take it off and try shooting again. Depending on the thickness of the filter and improper attachment of the hood, the filter or the hood may partially appear in the image.
Page 209: Images Cannot Be Played Back
[270] Troubleshooting > Viewing images Images cannot be played back. Make sure that the memory card is fully inserted into the product. The folder/file name has been changed on your computer. When an image file has been processed by a computer or when the image file was recorded using a model other than this product, playback on this product is not guaranteed.
Page 210: You Cannot Find The Wireless Access Point To Be Connected
[274] Troubleshooting > Viewing images A DPOF mark cannot be put. You cannot place DPOF marks on RAW images. [275] Troubleshooting > Wi-Fi You cannot find the wireless access point to be connected. Wireless access points may not be displayed on the product due to signal conditions. Place the product closer to the wireless access point.
Page 211: You Cannot Send Movies To A Smartphone
[278] Troubleshooting > Wi-Fi You cannot send movies to a smartphone. You cannot send AVCHD movies to a smartphone. Set [ File Format] to [MP4] to record movies. [Smart Remote Embedded] or [Send to Smartphone] is canceled halfway. When the remaining battery level is low, [Smart Remote Embedded] or [Send to Smartphone] may be canceled halfway.
Page 212: You Cannot Import Images
instruction manual of the smartphone. Do not place any metal objects other than a smartphone near the (N mark). Do not contact two or more smartphones to this product at the same time. If another NFC-based application is running on your smartphone, terminate that application. [282] Troubleshooting >...
Page 213: Formatted The Memory Card By Mistake
[285] Troubleshooting > Computers Images exported from a computer cannot be viewed on this product. Use “PlayMemories Home” to copy images that are stored on a computer onto a memory card inserted into this product and view them on this product. [286] Troubleshooting >...
Page 214: Images Are Printed With Both Edges Cut Off
[289] Troubleshooting > Printing Images are printed with both edges cut off. Depending on your printer, the left, right, top, and bottom edges of the image may be cut off. Especially when you print an image shot with [ Aspect Ratio] set to [16:9], the lateral end of the image may be cut off.
Page 215: The Product Does Not Work Properly
If an AC-PW20 AC Adaptor (sold separately) is used, disconnect the power cord. Connect the power cord and turn on the product again. If the product repeats the same error often or still does not work after trying these solutions, consult your Sony dealer or local authorized...
Page 216: Warning Messages
Sony service facility. [296] Troubleshooting > Others “--E-” appears on the screen. Remove the memory card, and insert it again. If the problem persists even after performing this procedure, format the memory card. [297] Messages > Messages Warning messages Set Area/Date/Time.
Page 217 Turn the product off and on again. If this icon does not disappear, consult your Sony dealer or local authorized Sony service facility. The retractable lens with power zoom is retracted. Turn off the product and eject the battery pack, then reinsert the battery pack.
Page 218: Situations This Product Has Difficulty Handling
System Error Camera Error. Turn power off then on. Remove the battery pack, and then re-insert it. If the message appears frequently, consult your Sony dealer or local authorized Sony service facility. Unable to magnify. Unable to rotate image. Images recorded with other products may not be enlarged or rotated.
Page 219 Auto HDR Subjects too small or too large Lock-on AF Sweep Panorama Scenes with little contrast, such as the sky or a sandy beach Sweep Panorama Superior Auto Scenes changing constantly, such as a waterfall Sweep Panorama Superior Auto...

This manual is also suitable for:

Ilce-7r

Sony ILCE-7 How To Use Manual

Shooting Still Images/Movies

Adding Applications to the Product

Customizing the Shooting Functions for Convenient Use

Shooting

Transferring Images to a TV

Confirming the Operation Method

Setup Menu

Selecting a Shooting Mode

Selecting a Drive Mode (Continuous Shooting/Self-Timer)

Adjusting Color Tones

Selecting an Effect Mode

Viewing Still Images

Deleting Images

Viewing Panoramic Images

Printing

Viewing Images on a TV

Transferring Images to a Smartphone

Transferring Images to a Computer

Changing the Settings of Wi-Fi Functions

Quick Links

Before Use

Names of parts

Icons and indicators

Using the strap

Adjusting the viewfinder

Need help?

Questions and answers

Related Manuals for Sony ILCE-7

Summary of Contents for Sony ILCE-7