Related Manuals for JVC KD-R416
Summary of Contents for JVC KD-R416
- Page 1 ENGLISH KD-R416 / KD-R415 / KD-R316 / KD-R315 CD RECEIVER / For canceling the display demonstration, see page 4. / For installation and connections, refer to the separate manual. INSTRUCTIONS GET0623-001A [U/UH]...
-
Page 2: How To Read This Manual
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. -
Page 3: Table Of Contents
How to forcibly eject a disc Listening to a disc [Hold] Listening to a USB device (For KD-R416/KD-R415) • You can forcibly eject the loaded disc even Listening to the other external if the disc is locked. To lock/unlock the disc, components •... -
Page 4: Canceling The Display Demonstration
Canceling the display demonstration Turn on the power. Select <DEMO OFF>. [Hold] (Initial setting) Finish the procedure. Setting the clock Turn on the power. [Hold] (Initial setting) Select <CLOCK>. Select <CLOCK SET>. Adjust the hour. Adjust the minute. Finish the procedure. ENGLISH... -
Page 5: Preparing The Remote Controller (Rm-Rk50)
Preparing the remote controller (RM-RK50) Warning (to prevent accidents and When you use the remote controller for the first time, pull out the insulation sheet. damage): • Do not install any battery other than CR2025 or its equivalent. • Do not leave the remote controller in a place (such as dashboards) exposed to direct Insulation sunlight for a long time. -
Page 6: Basic Operations
Ejects the disc Control dial Loading slot Display window Detaches the panel Auxiliary input jack Remote sensor For KD-R416/ • DO NOT expose to bright sunlight. KD-R415 USB (Universal Serial Bus) input jack When you press or hold the following button(s)... Remote... -
Page 7: Listening To The Radio
General operation Main unit Returns to the previous menu. Power off : Checks the current clock time. Power on : Changes the display information. Listening to the radio ] “FM” or “AM” Ÿ “ST” lights up when receiving an FM stereo broadcast with sufficient signal strength. Manual search Automatic presetting (FM)—... -
Page 8: Listening To A Disc
Manual presetting (FM/AM) Selecting a preset station You can preset up to 18 stations for FM and 6 stations for AM. Ex.: Storing FM station of 92.50 MHz into preset number “04.” ] “92.50MHz” Using the remote controller 5 U / D ∞ : Changes the preset [Hold] stations 2 R / F 3 : Searches for stations... -
Page 9: Selecting The Playback Modes
Selecting the playback modes You can use only one of the following playback Selects folder of the MP3/WMA modes at a time. Selects track Fast-forwards or ] “REPEAT” reverses the track “RANDOM” [Hold] Selecting a track/folder REPEAT TRACK RPT : Repeats current track FOLDER RPT : Repeats current folder RANDOM FOLDER RND : Randomly plays all tracks... -
Page 10: Listening To A Usb Device
Listening to a USB device (For KD-R416/KD-R415) This unit can play MP3/WMA tracks stored in a USB device. Ÿ USB input jack USB memory ] Turn on the power. All tracks will be played repeatedly until you change the source or detach the USB device. -
Page 11: Listening To The Other External Components
Listening to the other external components You can connect an external component to the AUX (auxiliary) input jack on the control panel. Preparation: Make sure <AUX ON> is selected ] “AUX IN” for the <SRC SELECT> = <AUX IN> setting. Ÿ... -
Page 12: Selecting A Preset Sound Mode
Selecting a preset sound mode You can select a preset sound mode suitable Storing your own sound mode for the music genre. You can store your own adjustments in memory. FLAT = NATURAL = DYNAMIC = [Hold] VOCAL BOOST = BASS BOOST = USER = (back to the beginning) While listening, you can adjust the tone level of ] <PRO EQ>... -
Page 13: Menu Operations
Menu operations Repeat step 2 if necessary. [Hold] • To return to the previous menu, press BACK. • To exit from the menu, press DISP or MENU. Category Menu item Selectable setting, [ Initial: Underlined DEMO • DEMO ON : Display demonstration will be activated Display automatically if no operation is done for about demonstration... - Page 14 : Preset the volume adjustment level of Volume adjust VOL ADJ +05 each source (except FM), compared to the (For KD-R416/ [ VOL ADJ 00 ] FM volume level. The volume level will KD-R415) automatically increase or decrease when you change the source.
-
Page 15: Title Assignment
Category Menu item Selectable setting, [ Initial: Underlined BEEP • BEEP ON : Activates the keypress tone. • BEEP OFF : Deactivates the keypress tone. AMP GAIN * • LOW POWER : VOLUME 00 – VOLUME 30 (Select if the Amplifier gain maximum power of each speaker is less than control... -
Page 16: Maintenance
Maintenance How to clean the connectors To keep discs clean Frequent detachment will deteriorate the A dirty disc may not play correctly. If a disc does become connectors. dirty, wipe it with a soft cloth To minimize this possibility, periodically wipe in a straight line from center to the connectors with a cotton swab or cloth moistened with alcohol, being careful not to... -
Page 17: More About This Unit
More about this unit Basic operations • When a disc is inserted upside down, “PLEASE” and “EJECT” appear alternately on the display. General Press 0 to eject the disc. • If you turn off the power while listening to • If the ejected disc is not removed within a track, playback will start from where it had 15 seconds, it is automatically inserted into been stopped previously next time you turn... - Page 18 MP3: 32 kbps — 320 kbps Playing MP3/WMA tracks from a USB WMA: 32 kbps — 192 kbps device (for KD-R416/KD-R415) – Sampling frequency of MP3: 32 kHz, 44.1 kHz, 48kHz (for MPEG-1) • While playing from a USB device, the playback 16 kHz, 22.05 kHz, 24 kHz (for MPEG-2)
-
Page 19: Troubleshooting
( If “PROTECT” does not disappear, consult your JVC car audio dealer or a company supplying kits. The unit does not work at all. - Page 20 This sometimes occurs during playback. This is correct. caused by how the tracks are recorded on the disc. For KD-R416/KD-R415: “NO FILE” Selected folder is an empty folder *. Select another appears on the display. folder that contains MP3/WMA tracks.
- Page 21 (e.g. album name). and a limited number of symbols. JVC bears no responsibility for any loss of the data in the USB mass storage class device while using this System. Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
-
Page 22: Specifications
2.5 V/20 kΩ load (full scale) KD-R315 Output Impedance: 1 kΩ Other Terminal: AUX (auxiliary) input jack, USB input jack (for KD-R416/KD-R415), Antenna input Frequency Range: 87.5 MHz to 108.0 MHz 531 kHz to 1 602 kHz FM Tuner: Usable Sensitivity: 9.3 dBf (0.8 μV/75 Ω) - Page 23 Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: 5 Hz to 20 000 Hz Dynamic Range: 93 dB Signal-to-Noise Ratio: 98 dB Wow and Flutter: Less than measurable limit MP3 Decoding Format: (MPEG1/2 Audio Layer 3) Max.
- Page 24 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit EN, TH © 2009 Victor Company of Japan, Limited 1009DTSMDTJEIN...
-
Page 25: Installation
โปรดปรึ ก ษาตั ว แทนจำหน่ า ยเครื ่ อ งเสี ย งติ ด รถยนต์ ของท่ า นหรื อ บริ ษ ั ท ที ่ จ ั ด หาชุ ด อุ ป กรณ์ ใ ห้ regarding installation kits, consult your JVC car audio dealer or a company supplying kits. รายการอุ ป กรณ์... -
Page 26: Electrical Connections
• Consult your JVC car audio dealer or a company supplying kits for details. ของคุ ณ หรื อ บริ ษ ั ท ที ่ จ ั ด ส่ ง ชุ ด อุ ป กรณ์ เ พื ่ อ ขอรายละเอี ย ด...
Need help?
Do you have a question about the KD-R416 and is the answer not in the manual?
Questions and answers