Page 1
2. Tape this template in position and trace around it. 3. Remove the template and carefully cut the rectangular open- ing. 4. Position the humidifier housing (see Fig. 2) over the hole (be sure it is level) and mark the five mounting holes. INSTALLATION INSTRUCTIONS...
Page 2
7. Place the humidifier housing over the screws, level the hous- ing and tighten the three screws. 8. Use two 1/2 in. (13 mm) screws to secure the humidifier housing at the bottom. 9. On the inside of the humidifier housing where the by-pass tube connects, snap the bearing bracket in place with the U shape of the bracket pointing up.
Page 3
After winter startup or maintenance, use the following procedure to check the humidifier operation: 1. Turn on the humidifier power and water supply. 2. Check the water level in the humidifier water pan water level M12243 setting should be 1-3/8 in. (35 mm). Turn the valve adjust-...
Need help?
Do you have a question about the HE120A and is the answer not in the manual?
Questions and answers