Page 1
INTEGRATED CIRCUITS DATA SHEET TDA1517; TDA1517P 2 × 6 W stereo power amplifier Product specification 2002 Jan 17 Supersedes data of 1998 Apr 28 File under Integrated Circuits, IC01...
Page 2
TDA1517; TDA1517P FEATURES GENERAL DESCRIPTION • Requires very few external components The TDA1517 is an integrated class-B dual output amplifier in a plastic single in-line medium power package • High output power with fin (SIL9MPF) and a plastic heat-dissipating dual •...
Page 3
Philips Semiconductors Product specification 2 × 6 W stereo power amplifier TDA1517; TDA1517P BLOCK DIAGRAM handbook, full pagewidth non-inverting mute switch input 1 kΩ output 1 kΩ power stage 18 kΩ mute/stand-by stand-by switch input switch stand-by reference voltage 15 kΩ...
Page 4
Fig.2 Pin configuration for SOT110-1. Fig.3 Pin configuration for SOT398-1. FUNCTIONAL DESCRIPTION The TDA1517 contains two identical amplifiers with differential input stages. The gain of each amplifier is fixed at 20 dB. A special feature of the device is the mute/standby switch which has the following features: •...
Page 5
UNIT TDA1517 thermal resistance from junction to case th j-c TDA1517P thermal resistance from junction to pins th j-p TDA1517; TDA1517P thermal resistance from junction to ambient th j-a MLC354 handbook, halfpage ( C) (1) R = 8 K/W. th j-c (2) R = 15 K/W.
Page 6
Philips Semiconductors Product specification 2 × 6 W stereo power amplifier TDA1517; TDA1517P DC CHARACTERISTICS = 25 °C; measured in Fig.6; unless otherwise specified. = 14.4 V; T SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT Supply supply voltage note 1 14.4...
Page 7
Philips Semiconductors Product specification 2 × 6 W stereo power amplifier TDA1517; TDA1517P AC CHARACTERISTICS = 4 Ω; f = 1 kHz; T = 25 °C; measured in Fig.6; unless otherwise specified. = 14.4 V; R SYMBOL PARAMETER CONDITIONS MIN.
Page 8
Philips Semiconductors Product specification 2 × 6 W stereo power amplifier TDA1517; TDA1517P MLC355 handbook, halfpage ON (I = 40 mA) mute (I = 40 mA) 100 µA) standby (I Fig.5 Standby, mute and on conditions. APPLICATION INFORMATION standby switch handbook, full pagewidth µF...
Page 9
Philips Semiconductors Product specification 2 × 6 W stereo power amplifier TDA1517; TDA1517P PACKAGE OUTLINES SIL9MPF: plastic single in-line medium power package with fin; 9 leads SOT110-1 pin 1 index 10 mm scale DIMENSIONS (mm are the original dimensions) UNIT max.
Page 10
Philips Semiconductors Product specification 2 × 6 W stereo power amplifier TDA1517; TDA1517P HDIP18: plastic heat-dissipating dual in-line package; 18 leads SOT398-1 (e ) pin 1 index 10 mm scale DIMENSIONS (inch dimensions are derived from the original mm dimensions) UNIT max.
Page 11
Philips Semiconductors Product specification 2 × 6 W stereo power amplifier TDA1517; TDA1517P SOLDERING The total contact time of successive solder waves must not exceed 5 seconds. Introduction to soldering through-hole mount packages The device may be mounted up to the seating plane, but...
Page 12
1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. DEFINITIONS DISCLAIMERS Short-form specification ...
Page 13
Philips Semiconductors Product specification 2 × 6 W stereo power amplifier TDA1517; TDA1517P NOTES 2002 Jan 17...
Page 14
Philips Semiconductors Product specification 2 × 6 W stereo power amplifier TDA1517; TDA1517P NOTES 2002 Jan 17...
Page 15
Philips Semiconductors Product specification 2 × 6 W stereo power amplifier TDA1517; TDA1517P NOTES 2002 Jan 17...
Need help?
Do you have a question about the TDA1517 and is the answer not in the manual?
Questions and answers