hit counter script
Philips S42SD-YD09 Service Manual
  1. Manuals
  2. Brands
  3. Philips Manuals
  4. TV
  5. S42SD-YD09
  6. Service manual
Philips S42SD-YD09 Service Manual

Philips S42SD-YD09 Service Manual

Colour television
Hide thumbs Also See for S42SD-YD09:
Table of Contents

Advertisement

Quick Links

Colour Television
©
Copyright 2006 Philips Consumer Electronics B.V. Eindhoven, The Netherlands.
All rights reserved. No part of this publication may be reproduced, stored in a
retrieval system or transmitted, in any form or by any means, electronic,
mechanical, photocopying, or otherwise without the prior permission of Philips.
Published by MW 0670 BG CD Customer Service
Contents
1. Technical Specifications, Connections, and Chassis
Overview
2. Safety Instructions, Warnings, and Notes
3. Directions For Use
4. Mechanical Instructions
5. Service Modes, Error Codes, and Fault Finding 21
6. Block Diagrams, Test Point Overview, and
Waveforms
7. Circuit Diagrams and PWB Layouts
8. Alignments
9. Circuit Descriptions, Abbreviation List, and IC Data
Sheets
10. Spare Parts List
11. Revision List
Printed in the Netherlands
SDI PDP 2K6
S42SD-YD09 (42-inch SD, v5)
S42AX-YD02 (42-inch HD, w1)
S50HW-YD01 (50-inch HD, w1)
S63HW-XD05 (63-inch HD, v4)
Page
2
9
10
11
56
62
62
79
80
81
Subject to modification
Module
EN 3122 785 16381

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S42SD-YD09 and is the answer not in the manual?

Questions and answers

Related Manuals for Philips S42SD-YD09

Summary of Contents for Philips S42SD-YD09

  • Page 1 All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise without the prior permission of Philips. Published by MW 0670 BG CD Customer Service...

  • Page 2: Overview

    63PF9631D/37 BJ3.0U PA 3122 785 16460 In above table the link is given between the SDI Plasma Display Panel and the Philips TV chassis (incl. chassis manual no.). G_16380_002.eps 190606 Figure 1-2 Location of mounting screws (42” SD v5) NOTE: screw torque 9.5 ± 0.5 kgf.cm Item Specification 42”...
  • Page 3 Technical Specifications, Connections, and Chassis Overview SDI PDP 2K6 EN 3 1.1.2 42" HD w1 1.1.3 50" HD w1 G_16380_005.eps G_16380_003.eps 190606 190606 Figure 1-5 Rear view of plasma panel (50” HD w1) Figure 1-3 Rear view of plasma panel (42” HD w1) G_16380_004.eps G_16380_006.eps 190606...
  • Page 4 EN 4 SDI PDP 2K6 Technical Specifications, Connections, and Chassis Overview 1.1.4 63" HD v4 Serial Numbers G_16380_007.eps G_16380_035.eps 121006 190606 Figure 1-7 Rear view of plasma panel (63” HD v4) Figure 1-9 Location of the serial number C 001 A 5 1 03 A Serial No : 0001~9999 Shift : A = Day, B = Afternoon,...
  • Page 5 Technical Specifications, Connections, and Chassis Overview SDI PDP 2K6 EN 5 Chassis Overviews 1.3.1 42” SD v5 G_16380_009.eps 190606 Figure 1-11 PWB location (42” SD v5) Table 1-3 PWB overview (42” SD v5) No. Location Name SMPS SMPS LOGIC-MAIN Board Assy PWB Logic Main X-MAIN Driving Board Assy PWB X Main...
  • Page 6 EN 6 SDI PDP 2K6 Technical Specifications, Connections, and Chassis Overview 1.3.2 42” HD w1 G_16380_010.eps 190606 Figure 1-12 PWB location (42” HD w1) Table 1-4 PWB overview (42” HD w1) No. Location Name SMPS SMPS LOGIC-MAIN Board Assy PWB LOGIC Main X-MAIN Driving Board Assy PWB X Main Y-MAIN Driving Board...
  • Page 7 Technical Specifications, Connections, and Chassis Overview SDI PDP 2K6 EN 7 1.3.3 50” HD w1 G_16380_011.eps 190606 Figure 1-13 PWB location (50” HD w5) Table 1-5 PWB overview (50” HD w1) No. Location Name SMPS SMPS LOGIC-MAIN Board Assy PWB LOGIC Main X-MAIN Driving Board Assy PWB X Main Y-MAIN Driving Board...
  • Page 8 EN 8 SDI PDP 2K6 Technical Specifications, Connections, and Chassis Overview 1.3.4 63” HD v4 G_16380_037.eps 121006 Figure 1-14 PWB location (63” HD v4) Table 1-6 PWB overview (50” HD w1) No. Location Name SMPS SMPS LOGIC-MAIN Board Assy PWB LOGIC Main X-MAIN Driving Board Assy PWB X Main Y-MAIN Driving Board...

  • Page 9: Safety Instructions, Warnings, And Notes

    Safety Instructions, Warnings, and Notes SDI PDP 2K6 EN 9 2. Safety Instructions, Warnings, and Notes Index of this chapter: parts and circuit board. Check the cord of AC power 2.1 Handling Precautions preparing damage. 2.2 Safety Precautions • Product Safety Mark: Some of electric or implement 2.3 Notes material have special characteristics invisible that was related on safety.

  • Page 10: Directions For Use

    EN 10 SDI PDP 2K6 Directions For Use • While the main power is “on”, do not touch any parts or precaution may result in the occurrence of an abnormality circuits other than the ones specified. The high voltage in the soldered areas. Power Supply block within the PDP module has a floating •...

  • Page 11: Mechanical Instructions

    Mechanical Instructions SDI PDP 2K6 EN 11 4. Mechanical Instructions Index of this chapter: Dis-assembling / Re-assembling 4.1 Dis-assembling / Re-assembling 4.1.1 Flexible Printed Circuit of Y-Buffer (Upper and Lower) 4.1.1 Flexible Printed Circuit of Y-Buffer (Upper and Lower) 4.1.2 Flat Cable Connector of X-main Board 4.1.3 FFC and TCP from Connector •...
  • Page 12 EN 12 SDI PDP 2K6 Mechanical Instructions 4.1.2 Flat Cable Connector of X-main Board • Dis-assembly: 1. Pull out the clamp of connector. 2. Pull Flat cable out press down lightly. 3. Turn the Flat Cable reversely. • Re-assembly: Put the Flat Cable into the connector press down lightly until you hear a “Click“.
  • Page 13 Mechanical Instructions SDI PDP 2K6 EN 13 4.1.3 FFC and TCP from Connector Notes: • Checking whether the foreign material is on the connector • Dis-assembling of TCP: inside before assembling of TCP. 1. Open the clamp carefully. • Be careful, do not damage the board by ESD during 2.
  • Page 14 EN 14 SDI PDP 2K6 Mechanical Instructions 4.1.4 Exchange of LBE and LBF board - 42” SD v5 6. Clean the connectors. 7. Re-connect the TCP, FFC, and the power cable to the connectors. 1. Remove the screws in order of 1-3-2 from the heatsink and 8.
  • Page 15 Mechanical Instructions SDI PDP 2K6 EN 15 4.1.5 Exchange of LBE and LBF board - 42” HD w1 6. Clean the connectors. 7. Re-connect the TCP, FFC, and power cable to the connectors. 1. Remove the screws in order of 1-3-2 from the heatsink and 8.
  • Page 16 EN 16 SDI PDP 2K6 Mechanical Instructions 4.1.6 Exchange of LBE, LBF and LBG board - 50” HD w1 6. Clean the connectors. 7. Re-connect the TCP, FFC, and power cable to the connectors. 1. Remove the screws in order of 2-3-1-4 from the heatsink 8.
  • Page 17 Mechanical Instructions SDI PDP 2K6 EN 17 4.1.7 Exchange of LB-E, LB-F and LB-G board - 63” HD v4 3. Remove the fixation screws [5] from the TPC heatsinks of the defective board. 4. Unplug the TPC, FFC, and power cable(s) from the 1.
  • Page 18 EN 18 SDI PDP 2K6 Mechanical Instructions 4.1.8 Exchange YB and YM board - 42” SD v5 6. Remove Y-Buffer from Y-main. 7. Replace the defective board. 8. Re-assemble Y-Buffer and Y-Main. 1. Unplug all of the FPC connectors of Y-Buffer. See “Photo 9.
  • Page 19 Mechanical Instructions SDI PDP 2K6 EN 19 4.1.10 Exchange YBU, YBL and YM board - 50” HD w1 7. Re-assemble the YBU and YBL to the Y-Main. 8. Plug in connector CN5412 between YBU and YBL. 9. Arrange the board on the chassis and then screw to fix. 1.
  • Page 20 EN 20 SDI PDP 2K6 Mechanical Instructions 4.1.11 Exchange YBU, YBL and YM board - 63” HD v4 6. Open the connectors CN5410/CN5510 between YBU and YBL. 7. Separate the YBL and YBU from Y-main. 1. Unplug power connector CN5010 and signal connector 8.

  • Page 21: Service Modes, Error Codes, And Fault Finding

    Service Modes, Error Codes, and Fault Finding SDI PDP 2K6 EN 21 5. Service Modes, Error Codes, and Fault Finding Index of this chapter: 5.1 Repair Tools 5.1.1 ComPair 5.1.2 Other Service Tools 5.2 Fault Finding 5.2.1 Possible Scenarios 5.2.2 Faulty Power Supply 5.2.3 No Display 5.2.4 Abnormal display 5.2.5 Horizontal line or block open...
  • Page 22 Use LVDS Tool when possible. “Power Supply Check” Go to & repair scenario Output of SSB is OK? with Philips application or PDP as stand alone check. SDI repair Scenario. Fault finding: Display fault. Repair Philips application. See chassis related Service Manuals Chassis ? BJ2.4U PA...
  • Page 23 Service Modes, Error Codes, and Fault Finding SDI PDP 2K6 EN 23 First check complete TV set. Fault Symptom? Some horizontal or Vertical No Voltage output Operating Voltages exist, Abnormal Display, not Lines don´t exist on the Operating Voltages don´t exist but No Display open or short Lines Display.
  • Page 24 EN 24 SDI PDP 2K6 Service Modes, Error Codes, and Fault Finding 5.2.2 Faulty Power Supply N N O Reconnect it AC Input Check CN8001/2pin Connect [220V ac] SMPS Voltage check Check SMPS D5V: 5V Check LED 8001,8002 Vs: 207V Check Green Check...
  • Page 25 Service Modes, Error Codes, and Fault Finding SDI PDP 2K6 EN 25 Reconnect it AC Input Check CN8001/2pin Connect [ 220Vac] SMPS Voltage check Check D5V: 5V Check SMPS LED 8001,8002 Vs: 195V Check Green Check Vset: 190V Check Vscan: -190V Check Ve: 110V Check...
  • Page 26 EN 26 SDI PDP 2K6 Service Modes, Error Codes, and Fault Finding AC Input Reconnect it 220Vac or 110Vac Check CN1308 Connect [ 220Vac] SMPS Voltage check D5V: 5V Check Vs: 202V Check Check Check SMPS LED 8001,8002 Vset: 190V Check Green Vscan: -190V...
  • Page 27 Service Modes, Error Codes, and Fault Finding SDI PDP 2K6 EN 27 Ac Input Reconnect it 230Vac or 120Vac Check CN801 Connect [ 220Vac] SMPS Voltage check D5.3V;5Vsw Check Vs ; 184V Check Va ; 72V Check SMPS Vset; 178V Check Vscan;...
  • Page 28 EN 28 SDI PDP 2K6 Service Modes, Error Codes, and Fault Finding 5.2.3 No Display (operating voltage present, but an image doesn’t exist on Screen) No Display is related with Y-MAIN, X-MAIN, Logic Main and so on. This page shows you how to check the boards, and the following pages show you how to find the defective board.
  • Page 29 Service Modes, Error Codes, and Fault Finding SDI PDP 2K6 EN 29 Check LVDS Cable Logic-main Replace Logic Board LED 2000;Green Fuse F2000, F2001 Y Y ES CN803 Cable Y-main Check F5001 Open F5003 Fuse Replace Y-Board open? Shor t Check Q5008 Shor t...
  • Page 30 EN 30 SDI PDP 2K6 Service Modes, Error Codes, and Fault Finding Check LVDS Cable Logic-main Replace Logic Board LED 2010;Green Fuse F2000, F2001 CN2026 Cable Replace Logic Board Y-main Check F5001 for Vdd (5V) OPEN Fuse Replace Y-Board F5004 for Vcc (15V) F5003 for Vs(200V) Short SHORT...
  • Page 31 Service Modes, Error Codes, and Fault Finding SDI PDP 2K6 EN 31 Vs fuse (F5003) – (0.x ~ x.x ohm) Vs fuse (F5003) – OPEN (x.x Mohm) 15V fuse (F5004) – (0.x ~ x.x ohm) 15V fuse (F5004) – OPEN (x.x Mohm) 5V fuse (F5001) –...
  • Page 32 EN 32 SDI PDP 2K6 Service Modes, Error Codes, and Fault Finding Vscan fuse (F5006) – (0.x ~ x.x ohm) Vscan fuse (F5006) – OPEN (x.x Mohm) Short FET,IGBT (contain the inner diode) (0.3 ~ 0.9 V) Short (0.000 ~ 0.00x V) [Ys, Yg, Ypn, Yscan, Yfr, Yrr, Xs, Xg, Short IGBT (do not contain the inner diode)
  • Page 33 Service Modes, Error Codes, and Fault Finding SDI PDP 2K6 EN 33 X-main Check F4004 for Vdd (5V) OPEN Fuse Replace X-B’d F4001 for Vcc (15V) F4002 for Vs (200V) SHORT Check SHORT Replace X-B’d Q4002,3 FET,IGBT Q4011 ~ Q4016 OPEN Measure SHORT...
  • Page 34 EN 34 SDI PDP 2K6 Service Modes, Error Codes, and Fault Finding Ve fuse (F4005) – (0.x ~ x.x ohm) Vs fuse (F4005) – OPEN (x.x Mohm) 15V fuse (F4001) – (0.x ~ x.x ohm) Vs fuse (F4001) – OPEN (x.x Mohm) 5V fuse (F4004) –...
  • Page 35 Service Modes, Error Codes, and Fault Finding SDI PDP 2K6 EN 35 OUTL<–>OUTH – (x.x Mohm) OUTL<–>OUTH –Short (x.x ohm) G_16380_129g.eps 190606 Figure 5-21 Fault symptom: “No Display”, 42” HD w1 7/7 Check LVDS Cable LED 2000;Green Logic-main Replace Logic Board Fuse F2000, F2002 CN8003 Cable LED2002 Blinks...
  • Page 36 EN 36 SDI PDP 2K6 Service Modes, Error Codes, and Fault Finding Y- main Check Point O O R Vs fuse (F5003) – (0.x ~ x.x ohm) Vs fuse (F5003) – OPEN (x.x Mohm) 15V fuse (F5000) – (0.x ~ x.x ohm) 15V fuse (F5000) –...
  • Page 37 Service Modes, Error Codes, and Fault Finding SDI PDP 2K6 EN 37 X-main Check F4001 OPEN F4000 Fuse Replace X-Board F4003 SHORT Check SHORT U4001(IPM) Replace X-Board FET,IPM U4002(IPM) Q4000 ~ Q4001 OPEN SHORT Replace Y-Buffer Y-BUFFER Measure OPEN Resistance OUTH&OUTL Short? Panel...
  • Page 38 EN 38 SDI PDP 2K6 Service Modes, Error Codes, and Fault Finding X- main Check Point Vs fuse (F4003) – (0.x ~ x.x ohm) Vs fuse (F4003) – OPEN (x.x Mohm) 15V fuse (F4000) – (0.x ~ x.x ohm) Vs fuse (F4000) – OPEN (x.x Mohm) 5V fuse (F4001) –...
  • Page 39 Service Modes, Error Codes, and Fault Finding SDI PDP 2K6 EN 39 Check LVDS Cable LED 2000;Green Logic-main Replace Logic B’d Fuse F2000, F2002 CN8003 Cable LED2002 Blinks Check Replace Y-B’d Y-main F5000 F5001 F5002 F5004 OPEN Fuse Replace Y-B’d Check Short U5000(IPM)
  • Page 40 EN 40 SDI PDP 2K6 Service Modes, Error Codes, and Fault Finding Vs fuse (F5002) – (0.x ~ x.x ohm) Vs fuse (F5002) – OPEN (x.x Mohm) Vs fuse (F5004) – (0.x ~ x.x ohm) Vs fuse (F5004) – OPEN (x.x Mohm) 15V fuse (F5001) –...
  • Page 41 Service Modes, Error Codes, and Fault Finding SDI PDP 2K6 EN 41 Short (0.3 ~ 0.9 V) Short (0.000 ~ 0.00x V) [Ys, Yg, Ypn, Yscan, Yfr, Yrr, Xs, Xg, Short (X.X Mohm) Short (0.000 ~ 0.00x ohm) G_16380_045.eps 161006 Figure 5-30 Fault symptom: “No Display”, 63”...
  • Page 42 EN 42 SDI PDP 2K6 Service Modes, Error Codes, and Fault Finding X-main Check F4000 F4001 F4003 OPEN Fuse Replace X-B’d SHORT Check U4003(IPM) SHORT FET,IPM Replace X-B’d U4005(IPM) U4006(IPM) Q4002, Q4003 OPEN SHORT Y-BUFFER Replace Y-buffer Measure OPEN Resistance OUTH&OUTL Short? Panel...
  • Page 43 Service Modes, Error Codes, and Fault Finding SDI PDP 2K6 EN 43 Vs fuse (F4003) – (0.x ~ x.x ohm) Vs fuse (F4003) – OPEN (x.x Mohm) 15V fuse (F4001) – (0.x ~ x.x ohm) 15V fuse (F4001) – OPEN (x.x Mohm) 5V fuse (F4000) –...
  • Page 44 EN 44 SDI PDP 2K6 Service Modes, Error Codes, and Fault Finding OUTL<–>OUTH – (x.x Mohm) OUTL<–>OUTH –Short (x.x ohm) G_16380_048.eps 161006 Figure 5-33 Fault symptom: “No Display”, 63” HD v4 6/6 5.2.4 Abnormal display (Abnormal Image is on Screen (except abnormality in Sustain or Address) ->...
  • Page 45 Service Modes, Error Codes, and Fault Finding SDI PDP 2K6 EN 45 Y-main Check O O pen F5001 Fuse F5003 Replace Y-Board open? Shor t Check Shor t Q5008 Replace Y-Board Q5009 Q5010 Open Q5013 Short? X-main Check F4000 Open F4003 Fuse Replace X-Board...
  • Page 46 EN 46 SDI PDP 2K6 Service Modes, Error Codes, and Fault Finding Y-main Check F5001 for Vdd (5V) OPEN Fuse Replace Y-Board F5004 for Vcc (15V) F5003 for Vs(200V) SHORT Check SHORT FET,IGBT Replace Y-Board Q5009 ~ Q5021 OPEN X-main Check F4004 for Vdd (5V) OPEN...
  • Page 47 Service Modes, Error Codes, and Fault Finding SDI PDP 2K6 EN 47 Y-main Check F5001 F5000 OPEN Fuse Replace Y-B’d F5003 SHORT Check SHORT FET,IPM U5009(IPM) Replace Y-B’d U5010(IPM) Q5002~7 OPEN Q5009 Q5012,13, Q5027~30 X-main Check F4001 OPEN Fuse Replace X-B’d F4000 F4003 SHORT...
  • Page 48 EN 48 SDI PDP 2K6 Service Modes, Error Codes, and Fault Finding Check Y-main F5000 F5001 F5002 F5004 OPEN Fuse Replace Y-B’d SHORT Check U5000(IPM) SHORT U5001(IPM) FET,IPM Replace Y-B’d U5002(IPM) Q5002 OPEN Q5022~25 Q5030~33, Q5036,38 Q5042~45 X-main Check F4000 F4001 OPEN Fuse...
  • Page 49 Service Modes, Error Codes, and Fault Finding SDI PDP 2K6 EN 49 [Logic Main] LED 2002 Blinks (Motion of Vsync) Regular Logic main Abnormal Normal State Replace board G_16380_050.eps 171006 Figure 5-42 Fault symptom: “Abnormal Display” 63” HD v4 2/2 5.2.5 Horizontal line or block open (some horizontal lines don’t exist on screen)
  • Page 50 EN 50 SDI PDP 2K6 Service Modes, Error Codes, and Fault Finding 5.2.6 Address open (some vertical lines don’t exist on screen) -> Address Open is related with Logic Main, Logic Buffer, FFC, TCP and so on. This page shows you how to check the boards, and the following pages show you how to find the defective board.
  • Page 51 Service Modes, Error Codes, and Fault Finding SDI PDP 2K6 EN 51 5.2.7 Address short (some vertical lines appear to be linked on screen) -> Address Short is related with Logic Main, Logic Buffer, FFC, TCP and so on. This page shows you how to check the boards, and the following pages show you how to find the defective board.
  • Page 52 EN 52 SDI PDP 2K6 Service Modes, Error Codes, and Fault Finding 5.2.8 Criteria for Panel Replacement, due to Defective Panel Cells B - Zone 3H/4 A A - Zone G_16380_508.eps 190606 Figure 5-48 Panel zones 42” SD v5 Specification Item Number of cell defects Distance between cell defects...
  • Page 53 Service Modes, Error Codes, and Fault Finding SDI PDP 2K6 EN 53 Specification Item Number of cell defects Distance between cell defects Non-lighting Zone A: 4 and less cell defect Zone B: 8 and less Non- Zone A: 0 extinguishing Zone B: 1 and less cell defect Flickering cell...
  • Page 54 EN 54 SDI PDP 2K6 Service Modes, Error Codes, and Fault Finding A - Zone B - Z G_16380_051.eps 171006 Figure 5-54 Panel zones 63” HD v4 Specification Item Number of cell defects Distance between cell defects Non-lighting Zone A: 2 and less cell defect Zone B:...
  • Page 55 The defective LCD-panel / PDP needs to be returned in the same packaging as the new part was send. If not the warranty claim will be rejected. Note 2: Please fill out this form completely and correctly, otherwise Euroservice is unable to fulfil the repair request! Owner: PHILIPS CE EUROSERVICE DE10WEG F_15590_115.eps 110705...

  • Page 56: Table Of Contents

    EN 56 SDI PDP 2K6 Block Diagrams, Test Point Overview, and Waveforms 6. Block Diagrams, Test Point Overview, and Waveforms Index of this chapter: 6.3.2 PSU Layout, Display Type 63" HD v4 6.1 Block Diagram for Drive Circuits 6.3.3 Voltage Level Overview 42" SD v5 6.2 Block Diagram for Logic Circuit 6.3.4 Voltage Level Overview 42"...

  • Page 57: Block Diagrams, Test Point Overview, And Waveforms

    Block Diagrams, Test Point Overview, and Waveforms SDI PDP 2K6 EN 57 Block Diagram for Logic Circuit Lo g ic M ain Blo ck D iag ram Lo g ic M ain Blo ck D iag ram LVDS LVDS INPUT INPUT ASIC ASIC...

  • Page 58: Psu

    EN 58 SDI PDP 2K6 Block Diagrams, Test Point Overview, and Waveforms 6.3.1 PSU Layout, Display Types 42" SD v5, 42" HD w1, and 50" HD w1 G_16380_225.eps 120606 Figure 6-6 PSU layout (42" SD v5, 42" HD w1, and 50" HD w1)

  • Page 59: Psu Layout, Display Type 63" Hd V4

    Block Diagrams, Test Point Overview, and Waveforms SDI PDP 2K6 EN 59 6.3.2 PSU Layout, Display Type 63" HD v4 Package 1, Main Supply G_16380_053.eps 201006 Figure 6-7 PSU layout (63" HD v4, Main PSU)
  • Page 60 EN 60 SDI PDP 2K6 Block Diagrams, Test Point Overview, and Waveforms Package 2, Sub Supply Figure 6-8 PSU layout (63" HD v4, Sub PSU))

  • Page 61: Voltage Level Overview 42" Sd V5

    Block Diagrams, Test Point Overview, and Waveforms SDI PDP 2K6 EN 61 6.3.3 Voltage Level Overview 42" SD v5 Table 6-1 Voltage level overview (also refer to the sticker on the rear side of the panel) Output voltage (V) Voltage Setting (Normal Load) Output Voltage Range 207 V ±...

  • Page 62: Alignments

    EN 62 SDI PDP 2K6 Circuit Diagrams and PWB Layouts 7. Circuit Diagrams and PWB Layouts Not applicable. 8. Alignments Index of this chapter: Important: Remove all non-default jumpers and reset all DIP 8.1 Power Supply Voltages switches, after the repair! 8.2 Waveform Alignments 42”...
  • Page 63 Alignments SDI PDP 2K6 EN 63 8.1.2 Location of potentiometers and test points on the PSU of 63” HD v4 Vset Vscan 3.4V G_16380_058.eps 171006 Figure 8-2 Location of potentiometers on the PSU of 63” HD v4 Vscan Vset G_16380_059.eps 171006 Figure 8-3 Location of test points on the PSU of 63”...
  • Page 64 EN 64 SDI PDP 2K6 Alignments 8.1.3 Adjustment Power Supply Voltages 42" SD v5 Table 8-1 Adjustment voltage level overview (also refer to the sticker on the rear side of the panel) Output voltage (V) Voltage Setting (Normal Load) Output Voltage Range 207 V ±...
  • Page 65 Alignments SDI PDP 2K6 EN 65 Y-main X-main Vs [F500 Vset [R 5035] Vs [F4002] Ve [L4017] Vscan [R5015] Vcc [F5001] Vcc [F4000] G_16380_502.eps 190606 Figure 8-5 Location of the test points for the supply voltages - 42” SD v5 8.1.4 Adjustment Power Supply Voltages 42"...
  • Page 66 EN 66 SDI PDP 2K6 Alignments Vset Vscan D3V3 G_16380_503.eps 160606 Figure 8-6 Location of the supply lines from the PSU to the boards - 42” HD w1...
  • Page 67 Alignments SDI PDP 2K6 EN 67 Drive board’s voltage check point Y- main Voltage Check Point YM Vs YM Vscan (200V) – F5003 (-190V) – R5081 YM Vsch YM Vset (-70V) – Vsch TP (195V) – R5048 YM 5.5V YM Vccf (Vscan + 15V) – Vccf TP (5.5V) –...
  • Page 68 EN 68 SDI PDP 2K6 Alignments (200V) – F4003 (110V) – F4005 G_16380_505.eps 5.5V (15V) – F4001 (5.5V) – F4004 160606 Figure 8-8 Location of the test points for the supply voltages - X-main - 42” HD w1 8.1.5 Adjustment Power Supply Voltages 50" HD w1 Table 8-3 Adjustment voltage level overview (also refer to the sticker on the rear side of the panel) Output voltage (V) Voltage Setting (Normal Load)
  • Page 69 Alignments SDI PDP 2K6 EN 69 V s e t V s c a n V c c V c c D 5 V D 5 V D 3 V 3 G_16380_506.eps 160606 Figure 8-9 Location of the supply lines from the PSU to the boards - 50” HD w1 Y-main X-main Vset [TP]...
  • Page 70 EN 70 SDI PDP 2K6 Alignments 8.1.6 Adjustment Power Supply Voltages 63" HD v4 Table 8-4 Adjustment voltage level overview (also refer to the sticker on the rear side of the panel) Output voltage (V) Voltage Setting (Normal Load) Output Voltage Range 184 V ±...
  • Page 71 Alignments SDI PDP 2K6 EN 71 Y-main X-main Vs [F5002] Vs [F4003] Vset [TP] Vcc [F5000] Ve [TP] Vdd [F5001] Vcc [F4000] Vsch [TP] Vdd [F4001] G_16380_057.eps 171006 Figure 8-12 Location of the test points for the supply voltages - 63" HD v4 Waveform Alignments 42”...
  • Page 72 EN 72 SDI PDP 2K6 Alignments G_16380_401.eps 160606 Figure 8-13 Waveform adjustment (Y-Board) - 42 SD v5 <Rising r amp> The second point is located 100 V below and 200 sec before the first point. G_16380_402.eps 160606 Figure 8-14 Rising ramp waveform (Y-Board) - 42 SD v5 <Falling r amp>...
  • Page 73 Alignments SDI PDP 2K6 EN 73 V R 5 0 0 0 a d j u s t m e n t R i s i n g r a m p V R 5 0 0 1 a d j u s t m e n t F a lli n g r a m p G_16380_404.eps 160606...
  • Page 74 EN 74 SDI PDP 2K6 Alignments Waveform Alignments 42” HD w1 • Connect the “OUT240” test point, located at the centre of the Y-buffer PWB, to the other channel, and then check the first Subfield waveform of one TV-Field. 1. Set the pattern to Full White: •...
  • Page 75 Alignments SDI PDP 2K6 EN 75 Waveform Alignments 50” HD w1 • Check the waveform by adjusting the Horizontal Division of the oscilloscope. • Check the waveform by adjusting the Horizontal 1. Set the pattern to Full White: Division of the oscilloscope. •...
  • Page 76 EN 76 SDI PDP 2K6 Alignments VR5000 Adjustment : Adjust VR5000 to set the time of Yrr (Main Reset Rising Ramp) like the picture of front page. Oscilloscope Setting : 50V / 20us VR5001 Adjustment : Adjust VR5001 to set the time of Yfr (Main Reset Falling Ramp) like the picture of front page.
  • Page 77 Alignments SDI PDP 2K6 EN 77 Waveform Alignments 63” HD v4 check the first Subfield operating waveform of one TV- Field. • Check the waveform by adjusting the Horizontal 1. Set the pattern to Full White: Division of the oscilloscope. •...
  • Page 78 EN 78 SDI PDP 2K6 Alignments VR5000 Adjustment : Adjust VR5000 to set the time of Yrr (Main Reset Rising Ramp) like the picture of the previous page. Oscilloscope Setting : 20V / 40us VR5001 Adjustment : Adjust VR5001 to set the time of Yfr (Preset) like the picture of the previous page.

  • Page 79: Sheets

    Circuit Descriptions, Abbreviation List, and IC Data Sheets SDI PDP 2K6 EN 79 9. Circuit Descriptions, Abbreviation List, and IC Data Sheets Index of this chapter: Abbreviation List 9.1 Main function of Each Assembly 9.2 Abbreviation List Alternating Current 9.3 IC Data Sheets Circuit On Foil Direct Current Energy Recovery Circuit...

  • Page 80: Spare Parts List

    • Find the SDI part number in this overview that matches the part number that is actually on the original board. • Cross the SDI board part number to the Philips part number. • Order the Philips part number. E_06532_026.eps...

  • Page 81: Revision List

    Revision List SDI PDP 2K6 EN 81 11. Revision List Manual xxxx xxx xxxx.0 • First release. Manual xxxx xxx xxxx.1 • Name changed from “SDI PDP Repair Manual” to “SDI PDP 2K6”. • Model 63” HD v4 added.

This manual is also suitable for:

S42ax-yd02S50hw-yd01S63hw-xd05

Table of Contents