All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise without the prior permission of Philips. Published by EL 0566 TV Service...
EN 2 BP2.2U, BP2.3U Technical Specifications, Connections, and Chassis Overview 1. Technical Specifications, Connections, and Chassis Overview Index of this chapter: 1.1.4 Miscellaneous 1.1 Technical Specifications 1.2 Connection Overview Power supply: 1.3 Chassis Overview - Mains voltage (V : 100 - 240...
Page 3
Technical Specifications, Connections, and Chassis Overview BP2.2U, BP2.3U EN 3 Cinch: Video CVBS - In, Audio - In 20 - Ground Ye - Video CVBS / 75 ohm Wh - Audio L 0.5 V / 10 kohm Aerial - In Rd - Audio R 0.5 V...
Page 4
EN 4 BP2.2U, BP2.3U Technical Specifications, Connections, and Chassis Overview DIGITAL AUDIO Cinch: S/PDIF - Out GEMSTAR Mini Jack: Remote Control - In/Out Bk - Coaxial 0.4 - 0.6V / 75 ohm - Ground - RXD - TXD MONITOR OUT Cinch: Video CVBS - Out, Audio - Out...
Safety Instructions, Warnings, and Notes BP2.2U, BP2.3U EN 5 2. Safety Instructions, Warnings, and Notes Index of this chapter: Service Default Mode (see chapter 5) with a color bar 2.1 Safety Instructions signal and stereo sound (L: 3 kHz, R: 1 kHz unless stated 2.2 Warnings...
Page 6
Lead Free Solder soldering tin and components, all needed spare parts will be available till the end of the service period. For the repair Philips CE is producing lead-free sets (PBF) from 1.1.2005 of such sets nothing changes. onwards. In case of doubt whether the board is lead-free or not (or with...
Directions for Use BP2.2U, BP2.3U EN 7 3. Directions for Use You can download this information from the following websites: http://www.philips.com/support http://www.p4c.philips.com As the software upgrade is a new feature, it is explained below.
Follow the disassemble instructions in described order. 4.4 Set Re-assembly Cable Dressing F_15400_111.eps 250505 Figure 4-1 Cable dressing (BP2.2U) Service Positions By placing a mirror under the TV, you can monitor the screen. 4.2.2 Aluminium Stands For easy servicing of this set, there are a few possibilities created: •...
Page 9
Mechanical Instructions BP2.2U, BP2.3U EN 9 Assy/Panel Removal 4.3.1 Metal Rear Cover Caution: Disconnect the Mains/AC Power cord before you remove the rear cover! 1. Place the TV set upside down on a table top, using the foam bars (see part "Foam Bars").
Page 10
EN 10 BP2.2U, BP2.3U Mechanical Instructions 4.3.6 Side I/O Panel 4.3.9 LED Panel After removal of the Speaker Compartment Covers, this panel 1. Disconnect the cable(s) from the panel. is accessible. 2. Remove the T10 mounting screws that hold the panel.
Page 11
Mechanical Instructions BP2.2U, BP2.3U EN 11 4.3.11 Plasma Display Panel / Glass Plate – Cable at LED panel. – Keyboard cable at SSB side. – Audio Amplifier supply cable at the Main Supply board. 1. Remove the T20 display panel mounting screws [1].
Page 12
EN 12 BP2.2U, BP2.3U Mechanical Instructions 4.3.12 PDP Glass Plate In order to remove/exchange the PDP glass plate: 1. Remove the PDP as described earlier. 2. Remove the T10 screws [1] from the mounting frame. 3. After removal of the frame, you can lift the glass plate from the set.
Service Modes, Error Codes, and Fault Finding BP2.2U, BP2.3U EN 13 5. Service Modes, Error Codes, and Fault Finding Index of this chapter: frequency to which the set will tune, would be as specified 5.1 Test Points in the channel map and could be different from the one 5.2 Service Modes...
Page 14
EN 14 BP2.2U, BP2.3U Service Modes, Error Codes, and Fault Finding • To display (or clear) the error code buffer. Table 5-2 Display option code overview How to Activate SAM Display Display Type Size Vertical Option Resolution Via a standard RC transmitter: key in the code “062596”...
Page 15
Service Modes, Error Codes, and Fault Finding BP2.2U, BP2.3U EN 15 5.2.3 Customer Service Mode (CSM) Change via “MENU”, “TV”, “PICTURE”, “DIGITAL PROCESSING”. • TV System. Gives information about the video system of Purpose the selected transmitter. When a customer is having problems with his TV-set, he can –...
Page 16
EN 16 BP2.2U, BP2.3U Service Modes, Error Codes, and Fault Finding How to Exit CSM Press any key on the RC-transmitter (with exception of the “CHANNEL +/-”, “VOLUME”, “MUTE” and digit (0-9) keys). Stepwise Start-up The stepwise start-up method, as known from FTL/FTP sets is not valid any more.
Page 17
Service Modes, Error Codes, and Fault Finding BP2.2U, BP2.3U EN 17 Stand-by or action holder: MIPS Protection action holder: St-by Mains is applied autonomous action Standby Supply starts running. +5V2, 1V2Stb, 3V3Stb and +2V5D become present. In case of PDP 3V3 Vpr to CPU PDP becomes present.
Page 18
EN 18 BP2.2U, BP2.3U Service Modes, Error Codes, and Fault Finding From part A From part B action holder: MIPS action holder: St-by autonomous action detect-1V2 received within +1.2V error 250ms? Enable the supply for +2.5V and +3.3V (ENABLE-3V3) No separate enable and detect is present for the +2V5 supply in the Baby Jaguar.
Page 19
Service Modes, Error Codes, and Fault Finding BP2.2U, BP2.3U EN 19 From part B From part B From part B action holder: MIPS Wait 10ms action holder: St-by Enable Alive check mechanism autonomous action Switch the NVM reset line HIGH.
Page 20
EN 20 BP2.2U, BP2.3U Service Modes, Error Codes, and Fault Finding 42" / 50" SDI V4 action holder: MIPS Semi Stand-by action holder: St-by autonomous action RGB video blanking and audio mute. Initialize audio and video processing ICs and functions.
Page 21
Service Modes, Error Codes, and Fault Finding BP2.2U, BP2.3U EN 21 42" / 50" SDI V4 action holder: MIPS Active action holder: St-by autonomous action Mute all sound outputs. Switch RESET_AUDIO and SOUND_ENABLE lines “high” Blank PDP display. Mute all video outputs.
Page 22
EN 22 BP2.2U, BP2.3U Service Modes, Error Codes, and Fault Finding action holder: MIPS Semi Stand-by action holder: St-by autonomous action Transfer Wake up reasons to the Stand- by µP. Images are re-transferred to DDR-RAM from Flash RAM (verification through checksum).
Page 23
Service Modes, Error Codes, and Fault Finding BP2.2U, BP2.3U EN 23 Semi Stand-by action holder: MIPS action holder: St-by This state transition is entered when stand-by is autonomous action requested and an authenticated POD is present. Reboot Power-down HDMI and 1394 hardware by keeping POWERDOWN-1394-GPIO- 0 line “high”.
Page 24
EN 24 BP2.2U, BP2.3U Service Modes, Error Codes, and Fault Finding POD stand by action holder: MIPS Switch “on” all supplies by switching “low” the ON-MODE I/O line. action holder: St-by autonomous action Full SSB power and the display related supplies...
Page 25
Service Modes, Error Codes, and Fault Finding BP2.2U, BP2.3U EN 25 action holder: MIPS action holder: St-by autonomous action Log the appropriate error and set stand-by flag in NVM Redefine wake up reasons for protection state and transfer to stand-by µP.
I 2 C SERVICE UART SERVICE CONNECTOR CONNECTOR 5.4.1 Introduction ComPair (Computer Aided Repair) is a service tool for Philips Consumer Electronics products. ComPair is a further development on the European DST (service remote control), I 2 C Power 9V DC which allows faster and more accurate diagnostics.
Page 27
Service Modes, Error Codes, and Fault Finding BP2.2U, BP2.3U EN 27 5.5.3 How to Clear the Error Buffer content, as this history can give you significant information). This to ensure that old error codes are no longer present. If possible, check the entire contents of the error buffer. In...
EN 28 BP2.2U, BP2.3U Service Modes, Error Codes, and Fault Finding Extra Info for error 3 checks on an I C acknowledge of the NVM. If • Error 1 (I C bus 1 blocked). When this error occurs, the NVM gives no acknowledge, the stand-by software TV will go to protection and the front LED will blink at 3 Hz.
Page 29
Service Modes, Error Codes, and Fault Finding BP2.2U, BP2.3U EN 29 Protections Fault Finding and Repair Tips 5.7.1 Software Protections Read also paragraph "Error Codes" - "Extra Info". Most of the protections and errors use either the stand-by 5.8.1 MPIF microprocessor or the VIPER controller as detection device.
(e.g. USB memory stick). You can download the new software 5.9.1 Introduction from the Philips website to your PC. The set software and security keys are stored in a NAND-Flash Partition 0 (item 7P80), which is connected to the VIPER via the PCI bus.
Page 31
TV into the software upgrade application. To do so: • Disconnect the TV from the Mains/AC Power. • Press the “OK” button on a Philips DVD RC-6 remote control (it is also possible to use the TV remote in "DVD" mode). •...
Page 32
EN 32 BP2.2U, BP2.3U Service Modes, Error Codes, and Fault Finding Personal Notes: E_06532_012.eps 131004...
Page 79
Circuit Diagrams and PWB Layouts BP2.3U AA EN 79 SRP Overview SSB 1.1. Introduction PCI-AD29 PLL-3V3 POD-SOP B10a SDA-UP-VIP TUN-VIPER-RX-DATA9 VSYNC-HIRATE PCI-AD29 PLL-OUT POD-SOP B10c SDA-UP-VIP TUN-VIPER-RX-DATA9 WAITA B10a SRP (Service Reference Protocol) is a software tool that creates a list with all references to signal lines. The list contains PCI-AD29 PNX-MA-0 POD-VALID...
Page 80
Circuit Diagrams and PWB Layouts BP2.3U AA EN 80 Layout Small Signal Board (Overview Top Side) 1B01 C4 1H00 D2 1Z05 E4 2AA4 A1 2B39 C4 2B89 B4 2G10 F2 2J24 B3 2L07 C3 2L91 C2 2LN7 B3 2N01 C4 2O14 D4 2Q03 E2 2Q23 D2...
Page 81
Circuit Diagrams and PWB Layouts BP2.3U AA EN 81 Layout Small Signal Board (Part 1 Top Side) Part 1 F_15400_054a.eps 310405...
Page 82
Circuit Diagrams and PWB Layouts BP2.3U AA EN 82 Layout Small Signal Board (Part 2 Top Side) Part 2 F_15400_054b.eps 260405...
Page 83
Circuit Diagrams and PWB Layouts BP2.3U AA EN 83 Layout Small Signal Board (Part 3 Top Side) Part 3 F_15400_054c.eps 260405...
Page 84
Circuit Diagrams and PWB Layouts BP2.3U AA EN 84 Layout Small Signal Board (Part 4 Top Side) Part 4 F_15400_054d.eps 260405...
Page 85
Circuit Diagrams and PWB Layouts BP2.3U AA EN 85 Layout Small Signal Board (Overview Bottom Side) 1C51 A2 2A38 A4 2A59 A4 2A81 A2 2AB5 A3 2C13 A3 2C50 A3 2G18 F4 2G39 F3 2J46 C4 2L52 B3 2P02 F1 2P40 F1 2T05 A1 2T28 A1...
Page 86
Circuit Diagrams and PWB Layouts BP2.3U AA EN 86 Layout Small Signal Board (Part 1 Bottom Side) Part 1 F_15400_055a.eps 260405...
Page 87
Circuit Diagrams and PWB Layouts BP2.3U AA EN 87 Layout Small Signal Board (Part 2 Bottom Side) Part 2 F_15400_055b.eps 260405...
Page 88
Circuit Diagrams and PWB Layouts BP2.3U AA EN 88 Layout Small Signal Board (Part 3 Bottom Side) Part 3 F_15400_055c.eps 260405...
Page 89
Circuit Diagrams and PWB Layouts BP2.3U AA EN 89 Layout Small Signal Board (Part 4 Bottom Side) Part 4 F_15400_055d.eps 260405...
Alignments BP2.2U, BP2.3U EN 101 8. Alignments Index of this chapter: IF AFC 8.1 General Alignment Conditions Alignment procedure: 8.2 Hardware Alignments 1. During the IF AFC-parameter adjustment, one can see 8.3 Software Alignments OSD feedback on the screen. 8.4 Option Settings 2.
Page 102
EN 102 BP2.2U, BP2.3U Alignments Table 8-2 White D alignment values Color Temp. Cool Normal Warm 0.276 0.285 0.313 0.282 0.293 0.329 When such equipment is not available, use “method 2”. Method 2 (without color analyzer): If you do not have a color analyzer, you can use the default values.
Page 103
Alignments BP2.2U, BP2.3U EN 103 8.4.2 Dealer Options Table 8-4 Dealer options Menu item Subjects Options Description Personal Options Picture Mute Picture mute active in case no picture detected Noise in case of no picture detected Virgin Mode TV starts up (once) with a language selection menu after the Mains switch is turned "on" for...
Page 104
3 (8) Interconnect China IF 0= Off, 8= On 4 (16) Alternative Tuner 0= Philips, 16= Alps Tuner make. 5 (32) Tuner Type 0= TD1336s (B-Chassis US), 32= TD1331(J-Chassis US), Tuner type 64= UV1318 (Analogue EU), 96= TD1316 (Hybrid EU) (B-chassis US is e.g "BP2.3U").
Page 105
Alignments BP2.2U, BP2.3U EN 105 Byte Bit (dec. value) Subject Options Settings (in decimal values) Remarks 0 (1) Display Screen 000 (0000)= 42-inch PDP (SDI) HD V3, 001 (0256)= 50-inch PDP (SDI) HD V3, Screen size, type, and resolution. 002 (0512)= 42-inch PDP (FHP) ALiS, 003 (0768)= 30-inch LCD (LPL),...
EN 106 BP2.2U, BP2.3U Circuit Descriptions, Abbreviation List, and IC Data Sheets 9. Circuit Descriptions, Abbreviation List, and IC Data Sheets Index of this chapter: When the input channel is an analog channel, the signal is 9.1 Introduction processed via the NTSC decoder and the VBI data decoder.
Page 107
Circuit Descriptions, Abbreviation List, and IC Data Sheets BP2.2U, BP2.3U EN 107 SSB Cell Layout LVDS DC/DC CONV. DISPLAY INTERFACE SIGNAL PROCESSING SOURCE SELECTION RS232 MPIF TUNER IEEE IEEE 1394-1 1394-2 UART HDMI-1 HDMI-2 (OPT) (OPT) (OPT) F_15400_009.eps 210405 Figure 9-1 SSB top view...
EN 108 BP2.2U, BP2.3U Circuit Descriptions, Abbreviation List, and IC Data Sheets Power Supply 9.2.5 +12V Switch • The +12V switch is activated when the POD-MODE signal 9.2.1 Introduction is "low". • The rise time of the output voltage is set by components The Main Power Supply is a buy-in module (it belongs to the 2U42, 3U43, and 3U95 at about 30 ms.
Page 109
Circuit Descriptions, Abbreviation List, and IC Data Sheets BP2.2U, BP2.3U EN 109 PWM Generator and MOSFET Drivers 9.2.10 Useful Data This circuit is a one-chip solution (item 7U00). It contains all the circuitry for two independent buck regulators (3V3 and 1V2).
Page 110
EN 110 BP2.2U, BP2.3U Circuit Descriptions, Abbreviation List, and IC Data Sheets Main Supply SUPPLY DISTRIBUTION IN STANDBY MODE 0.24 0.94 d.c. power: a.c. power: STDBY POD STDBY +12VS +8V6 +5V2 power 0.00 0.00 0.24 0.00 DC-DC DC-DC 12V/3.3V 12V/1.2V...
Page 111
Circuit Descriptions, Abbreviation List, and IC Data Sheets BP2.2U, BP2.3U EN 111 Main Supply SUPPLY DISTRIBUTION IN POD MODE d.c. power: 10.78 a.c. power: 15.40 STDBY POD STDBY +12VS +8V6 +5V2 power 8.48 0.00 0.35 1.91 DC-DC DC-DC 12V/3.3V 12V/1.2V...
Page 112
EN 112 BP2.2U, BP2.3U Circuit Descriptions, Abbreviation List, and IC Data Sheets Main Supply SUPPLY DISTRIBUTION IN ON MODE d.c. power: 23.66 a.c. power: 47.38 STDBY POD STDBY +12VS +8V6 +5V2 power 20.62 2.18 0.35 12.11 DC-DC DC-DC 12V/3.3V 12V/1.2V...
Page 113
Circuit Descriptions, Abbreviation List, and IC Data Sheets BP2.2U, BP2.3U EN 113 Inputs drawn from the USB ports, the protection becomes active (= "high"). During stand-by, when there is no +5V available (and VIPER is 9.3.1 not active), the USB port does not work. This is controlled by...
Page 114
EN 114 BP2.2U, BP2.3U Circuit Descriptions, Abbreviation List, and IC Data Sheets – HDMI connectors (Video, Audio, HDCP, Control). HDMI Source HDMI Sink – Analogue (YPbPr, RGB, and H/V). • Control signals: – C coming from TDA9975 (MM-BUS1). Video Video –...
Page 115
Circuit Descriptions, Abbreviation List, and IC Data Sheets BP2.2U, BP2.3U EN 115 – Contains manufacturer name, product name, type, etc. FRONT-END VIPER (replaced by CEC). • MPEG Source: TUNER DEMOD DEMUX – Contains flags that permit optimized display of de-...
Page 116
EN 116 BP2.2U, BP2.3U Circuit Descriptions, Abbreviation List, and IC Data Sheets – Active Front-End. – Application code download. – Active VIPER, Stby-uP. – Only from cable operator towards user. • Allows the POD to request services: – Service Information (SI) like: –...
Page 117
Circuit Descriptions, Abbreviation List, and IC Data Sheets BP2.2U, BP2.3U EN 117 • AGC at vision IF level to give fixed CVBS output level, and cntv cnta AGC at RF level (tuner AGC) to limit output level of the SCART2 out / Ext2 out Jaguar system tuner.
Page 118
EN 118 BP2.2U, BP2.3U Circuit Descriptions, Abbreviation List, and IC Data Sheets allow selection of the output out of five L+R inputs, two mono In the normal mode the data links can handle up to three video signals (AM internal or AM external) and two externally signals: CVBS or YC signal from the primary video selector, connected DSND streams.
Page 119
Circuit Descriptions, Abbreviation List, and IC Data Sheets BP2.2U, BP2.3U EN 119 PNX2015: AVIP The receiver block gets the serial data stream and converts it to a parallel stream. This parallel data is fed to the "de- multiplexer and formatter " block where the selected audio/ 9.8.1...
Page 120
EN 120 BP2.2U, BP2.3U Circuit Descriptions, Abbreviation List, and IC Data Sheets DCU (Data Capturing Unit) DEMDEC (Demodulator and Decoder) Data Capture Unit DEMDEC DSP pilot demod. I2d Data_1 (cvbs) Packet DEC L/A VBI data SAP / EIAJ Decimator Data Slicer SERPAR demod.
Page 121
Circuit Descriptions, Abbreviation List, and IC Data Sheets BP2.2U, BP2.3U EN 121 PNX2015: Columbus (Comb Filter) the banks via I C, by programming bits [2:0] of the SYSTEM_SELECT register. The bits [6:4] of the SYSTEM_SELECT register select, which register bank is used 9.9.1...
Page 122
EN 122 BP2.2U, BP2.3U Circuit Descriptions, Abbreviation List, and IC Data Sheets 5. All I/O lines will be set in default state, as “told” by the software. - Lower Voltage Swing (only 350 mV vs. 3 V) - Allows faster Clocking –...
Page 123
Circuit Descriptions, Abbreviation List, and IC Data Sheets BP2.2U, BP2.3U EN 123 9.13.2 Block Diagram de-interlacing and scaling tasks. It reads images from memory, performs a transformation, and writes the result back in memory. 2x225 MHz, 32-bit wide DDR Optional external coprocessors...
Page 124
EN 124 BP2.2U, BP2.3U Circuit Descriptions, Abbreviation List, and IC Data Sheets The primary and secondary QVCP each contain a series of • MODE: In case the set is "On", to toggle the smart modes. layers and mixers. The QVCP creates a series of display data...
Page 125
Circuit Descriptions, Abbreviation List, and IC Data Sheets BP2.2U, BP2.3U EN 125 OTC SOFTWARE Picture Profiles content SetHue (H) EPLD Inverter board CCFL Profiles SetSaturation (S) personal RED left inverter RED right SetLightState GREEN left GREEN inverter GREEN right RampUp...
EN 126 BP2.2U, BP2.3U Circuit Descriptions, Abbreviation List, and IC Data Sheets 9.16 Abbreviation List CVBS Composite Video Blanking and Synchronization Digital to Analogue Converter 0/6/12 SCART switch control signal on A/V Dynamic Bass Enhancement: extra board. 0 = loop through (AUX to TV), 6...
Page 127
On Screen Display SMPS Switched Mode Power Supply On screen display Teletext and Sync On Green Control; also called Artistic (SAA5800) SOPS Self Oscillating Power Supply Project 50: communication protocol S/PDIF Sony Philips Digital InterFace between TV and peripherals SRAM Static RAM...
Page 128
EN 128 BP2.2U, BP2.3U Circuit Descriptions, Abbreviation List, and IC Data Sheets Small Signal Board STBY STandBY Sync On Green SVGA 800x600 (4:3) SVHS Super Video Home System Software SWAN Spatial temporal Weighted Averaging Noise reduction SXGA 1280x1024 Thin Film Transistor...
Circuit Descriptions, Abbreviation List, and IC Data Sheets BP2.2U, BP2.3U EN 129 9.17 IC Data Sheets electrical diagrams (with the exception of "memory" and "logic" ICs). This section shows the internal block diagrams and pin configurations of ICs that are drawn as "black boxes" in the 9.17.1 Diagram B1A, NCP5422AD (IC 7U00)
EN 130 BP2.2U, BP2.3U Circuit Descriptions, Abbreviation List, and IC Data Sheets 9.17.2 Diagram B2A, NXT2003 (IC 7TG0) Block Diagram FAT VSB/QAM MPEG IF In text text text Demodulator Transport Sense 32K x 8 text RF Gain SRAM BERT text...
Page 131
Circuit Descriptions, Abbreviation List, and IC Data Sheets BP2.2U, BP2.3U EN 131 9.17.3 Diagram B2B, UPC3220GR (IC 7T43) Block Diagram and Pin Configuration (Top View) AGC AMP. MIXER AGC IN1 MIX OUT2 AGC IN2 MIX OUT1 OSC OUT BUFFER AMP.
Page 132
EN 132 BP2.2U, BP2.3U Circuit Descriptions, Abbreviation List, and IC Data Sheets 9.17.4 Diagram B3x, PNX3000HL (IC 7C00) Block Diagram CVBSOUTA 1× CVBSOUTB 2NDSIFEXT (FMRAD) CVBSOUTIF SIFAGC MIXER SIFIN 2nd SIF internal & AM SND DEMOD DTV 1st IF DTVOUT...
Page 133
Circuit Descriptions, Abbreviation List, and IC Data Sheets BP2.2U, BP2.3U EN 133 9.17.5 Diagram B4x, PNX2015E (IC 7J00) Block Diagram 16-BIT 225 MHz DDR PNX2015 MEMORY CONTROLLER video NORTH TUNNEL SOUTH TUNNEL PNX8550 coprocessor HD input (TDA9975) MEMORY VO-1 BASED SCALER...
Page 134
EN 134 BP2.2U, BP2.3U Circuit Descriptions, Abbreviation List, and IC Data Sheets 9.17.6 Diagram B4A, CY2305SC-1 (IC 7J08) Block Diagram Pin Configuration SOIC/TSSOP Top View CLKOUT CLKOUT CLKA1 CLKA1 CLKA4 CLKA3 CLKA2 CLKA2 CLKA3 CLKB4 CLKB1 CLKB3 CLKA4 CLKB2 CLKB1...
Page 135
Circuit Descriptions, Abbreviation List, and IC Data Sheets BP2.2U, BP2.3U EN 135 9.17.8 Diagram B5x, PNX8550EH (IC 7V00) Block Diagram Streaming Interface Optional External 32-Bit 225 MHz DDR from Tunnel Video Improvement Processing PNX8550 Memory 30 (dig) DVD-CSS 5-Layer Controller...
Page 136
EN 136 BP2.2U, BP2.3U Circuit Descriptions, Abbreviation List, and IC Data Sheets 9.17.9 Diagram B5A, LM3526MX (IC 7Q01) Block Diagram Pin Configuration LM3526-L F_15400_134.eps 240505 Figure 9-38 Internal block diagram and pin configuration...
Page 138
EN 138 BP2.2U, BP2.3U Circuit Descriptions, Abbreviation List, and IC Data Sheets 9.17.11 Diagram B8, ISP1561BM (IC 7N00) Block Diagram SMI# SEL48M PME# ISP1561BM GLOBAL CONTROL IRQ1 IRQ12 legacy keyboard and mouse support AD[31:0] PCI CORE KBIRQ1 C/BE#[3:0] REQ# MUIRQ12...
Page 139
Circuit Descriptions, Abbreviation List, and IC Data Sheets BP2.2U, BP2.3U EN 139 9.17.12 Diagram B10A, TPS2211AIDB (IC 7P00) Block Diagram TPS2211A Card B V CC1 3.3 V V CC2 3.3 V V pp1 12 V V pp2 See Note A...
Page 140
EN 140 BP2.2U, BP2.3U Circuit Descriptions, Abbreviation List, and IC Data Sheets 9.17.13 Diagram B10A, STV0701 (IC 7P03) Block Diagram Pin Configuration F_15400_138.eps 240505 Figure 9-42 Internal block diagram and pin configuration...
Page 141
Circuit Descriptions, Abbreviation List, and IC Data Sheets BP2.2U, BP2.3U EN 141 9.17.14 Diagram C, TDA8925ST (IC 7701) Block Diagram V DD2 V DD1 TDA8925ST/J TDA8926J BOOT1 DRIVER HIGH CONTROL OUT1 HANDSHAKE DRIVER REL1 STAB temp V SS1 TEMPERATURE SENSOR...
Need help?
Do you have a question about the BP2.2U and is the answer not in the manual?
Questions and answers