All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise without the prior permission of Philips. Published by WS 0670 BG CD Customer Service...
EN 2 LC4.9E AB Technical Specifications, Connections, and Chassis Overview 1. Technical Specifications, Connections, and Chassis Overview Index of this chapter: Power consumption : ≈ 450 1.1 Technical Specifications - Normal operation (W) 1.2 Connection Overview - Stand-by (W) : < 2 1.3 Chassis Overview...
Page 3
Technical Specifications, Connections, and Chassis Overview LC4.9E AB EN 3 PCMCIA SPDIF 1. Ground - RCA (Electrical) Coax, 75 ohm 2. Data 3 3. Data 4 Service Connector (ComPair) 4. Data 5 - SDA-S C Data (0 - 5 V) 5.
Page 4
EN 4 LC4.9E AB Technical Specifications, Connections, and Chassis Overview - Ground Green - Audio R 0.5 V / 1 kohm 10 - n.c. - Audio R 0.5 V / 10 kohm 11 - Video Green 0.7 V / 75 ohm - Audio L 0.5 V...
Safety Instructions, Warnings, and Notes LC4.9E AB EN 5 2. Safety Instructions, Warnings, and Notes Index of this chapter: Service Default Mode (see chapter 5) with a colour bar 2.1 Safety Instructions signal and stereo sound (L: 3 kHz, R: 1 kHz unless stated 2.2 Warnings...
Page 6
Alternative BOM identification Regardless of the special lead-free logo (which is not always In September 2003, Philips CE introduced a change in the way indicated), one must treat all sets from this date onwards the serial number (or production number, see Figure 2-1) is according to the rules as described below.
Directions for Use LC4.9E AB EN 7 3. Directions for Use You can download this information from the following websites: http://www.philips.com/support http://www.p4c.philips.com...
EN 8 LC4.9E AB Mechanical Instructions 4. Mechanical Instructions Index of this chapter: Notes: 4.1 Cable Dressing • Figures below can deviate slightly from the actual situation, 4.2 Service Positions due to the different set executions. 4.3 Assy/Panel Removal •...
Page 9
Mechanical Instructions LC4.9E AB EN 9 The aluminium stands (order code 3122 785 90480) can be mounted with the back cover removed or still left on. So, the stand can be used to store products or to do measurements. It...
Page 10
EN 10 LC4.9E AB Mechanical Instructions Set Re-assembly To re-assemble the whole set, execute all processes in reverse order. Notes: • While re-assembling, make sure that all cables are placed and connected in their original positions. See Figure "Cable dressing". Be careful with the fragile LVDS cable.
Service Modes, Error Codes, and Fault Finding LC4.9E AB EN 11 5. Service Modes, Error Codes, and Fault Finding Index of this chapter: How to Enter 5.1 Test Points To enter SDM, use one of the following methods: 5.2 Service Modes •...
Page 12
EN 12 LC4.9E AB Service Modes, Error Codes, and Fault Finding How to Navigate Menu Explanation Use one of the following methods: 1. LLLLL. This represents the run timer. The run timer counts • When you press the MENU button on the remote control, normal operation hours, but does not count standby hours.
Page 13
Service Modes, Error Codes, and Fault Finding LC4.9E AB EN 13 How to Exit How to Exit Switch the set to STANDBY by pressing the mains button on To exit CSM, use one of the following methods: the remote control transmitter or the television set.
Page 14
EN 14 LC4.9E AB Service Modes, Error Codes, and Fault Finding 2. Press the MENU button on the remote control transmitter. This brings up the normal user menu. 3. In the normal user menu, use the MENU UP/DOWN keys to highlight the PICTURE sub menu.
Page 15
UART SERVICE CONNECTOR CONNECTOR Service Tools 5.4.1 ComPair Introduction ComPair (Computer Aided Repair) is a service tool for Philips Consumer Electronics products. ComPair is a further I 2 C Power 9V DC development on the European DST (service remote control), E_06532_021.eps which allows faster and more accurate diagnostics.
EN 16 LC4.9E AB Service Modes, Error Codes, and Fault Finding Since 2004, the LVDS output connectors in our Flat TV models are standardised (with some exceptions). With the two Note: If you exit SAM by disconnecting the mains from the delivered LVDS interface cables (31p and 20p) you can cover television set, the error buffer is not reset.
Page 17
Service Modes, Error Codes, and Fault Finding LC4.9E AB EN 17 The Blinking LED Procedure Using this procedure, you can make the contents of the error buffer visible via the front LED. This is especially useful when there is no picture.
Page 18
EN 18 LC4.9E AB Service Modes, Error Codes, and Fault Finding Table 5-3 NVM Default values (option bit settings through NVM Editor in SAM Mode) Byte Nr. Bit Feature/Mode Description Byte 0 0 QSS (LSB) Mode of quasi split sound amplifier...
Page 19
Service Modes, Error Codes, and Fault Finding LC4.9E AB EN 19 Byte Nr. Bit Feature/Mode Description Byte 5 0 FFI Fast Filter 179(dec) 1 NNR No red reduction during blue stretch 2 MUS NTSC matrix 3 GAM Gamma control 4 CBS...
Page 20
EN 20 LC4.9E AB Service Modes, Error Codes, and Fault Finding 5.7.4 Video Processing No Power 1. Check +12 V and 3V3 at position 1J02. 2. If no supply, check the connector 1J02. 3. If it is correct, check the power supply board.
Block Diagrams, Test Point Overviews, and Waveforms LC4.9E AB 6. Block Diagrams, Test Point Overviews, and Waveforms Wiring Diagram 8736 AUDIO AMPLIFIER 8735 8102 PDP POWER SUPPLY INVERTER INVERTER 8323 CN308 0311 1M03 1M46 RIGHT LEFT SPEAKER SPEAKER 8900 8146...
Block Diagrams, Test Point Overviews, and Waveforms LC4.9E AB Block Diagram IBO Zapper IBO - ZAPPER PANEL (DVB) COMMON INTERFACE ANALOG BACK END FRONT END 7600 MOJO 7502 7500 +5VClean TDA10046HT 7700 7100 UDA1334ATS 7501 1500 STV0700 PNX8316HS RESET_FE-N 3135...
Block Diagrams, Test Point Overviews, and Waveforms LC4.9E AB Supply Voltage Overview SUPPLY LINE OVERVIEW TOP CONNECTORS TUNER & IF SCALER SIDE CONNECTORS LED PANEL 0345 1K00 5102 0345 SUPPLY 5K00 5103 PANEL (PSU) MOJO 5K01 1M16 HERCULES 5J03 1540...
Page 74
Circuit Diagrams and PWB Layouts LC4.9E AB SSB: EPLD 1P01 E 1P02 E EPLD 1P03 F 1P04 F 1P05 G 1P06 A EAGLE INTERFACE 7N02-6 1P07 D EP1C12F256C8 7N02-3 FOR MFD ONLY 2P01 B Φ EP1C12F256C8 1P06 Φ 2P02 B...
Page 75
Circuit Diagrams and PWB Layouts LC4.9E AB SSB: Diversity Tables B9-B21 MUX-SYNC INTERFACE MUX-SYNC INTERFACE ANALOG I/O SCART SIDE CONNECTORS & PIXEL PLUS Item Description 2A00 CER2 0603 X7R 16V 100N COL Item Description 2A01 CER1 0402 NP0 50V 100P COL...
Page 76
Circuit Diagrams and PWB Layouts LC4.9E AB Layout Small Signal Board (Top Side Overview) 1101 D2 2109 D1 2282 B3 2701 A6 2803 B6 2823 C5 2922 C6 2945 B6 2B07 B7 2D10 C7 2E25 C5 2G09 D4 2G52 D2...
Page 77
Circuit Diagrams and PWB Layouts LC4.9E AB Layout Small Signal Board (Top Side Part 1) Part 1 F_15430_025a.eps 180405...
Page 78
Circuit Diagrams and PWB Layouts LC4.9E AB Layout Small Signal Board (Top Side Part 2) Part 2 F_15430_025b.eps 180405...
Page 79
Circuit Diagrams and PWB Layouts LC4.9E AB Layout Small Signal Board (Top Side Part 3) Part 3 F_15430_025c.eps 180405...
Page 80
Circuit Diagrams and PWB Layouts LC4.9E AB Layout Small Signal Board (Top Side Part 4) Part 4 F_15430_025d.eps 180405...
Page 81
Circuit Diagrams and PWB Layouts LC4.9E AB Layout Small Signal Board (Bottom Side Overview) 1102 C6 1J00 A5 1K04 B7 2209 A6 2231 A6 2245 B5 2262 B6 2276 A6 2502 A6 2709 A3 2757 A3 2A02 B2 2D12 C1...
Page 82
Circuit Diagrams and PWB Layouts LC4.9E AB Layout Small Signal Board (Bottom Side Part 1) Part 1 F_15430_024a.eps 180405...
Page 83
Circuit Diagrams and PWB Layouts LC4.9E AB Layout Small Signal Board (Bottom Side Part 2) Part 2 F_15430_024b.eps 180405...
Page 84
Circuit Diagrams and PWB Layouts LC4.9E AB Layout Small Signal Board (Bottom Side Part 3) Part 3 F_15430_024c.eps 180405...
Page 85
Circuit Diagrams and PWB Layouts LC4.9E AB Layout Small Signal Board (Bottom Side Part 4) Part 4 F_15430_024d.eps 180405...
Page 86
Circuit Diagrams and PWB Layouts LC4.9E AB SSB: Tuner and VIF 1101 B1 7101 D5 TUNER & IF 1102 A1 7102 D7 1103 D1 7103 E6 1104 B8 F101 B1 1102 STANDARD SD2 IDTV SD2 FM RADIO SD2 5102 1105 C8...
Circuit Diagrams and PWB Layouts LC4.9E AB IBO Zapper: Analog Back End 1500 C13 5512 G3 2500 A7 5513 H3 2501 A6 5514 I3 ANALOG BACK END 2502 B3 5528 A5 2503 C7 6503 E5 3528 2504 B3 6504 G8...
Page 130
Circuit Diagrams and PWB Layouts LC4.9E AB IBO Zapper: Front End 1600 A2 I607 E6 FRONT END 1601 F6 I614 G8 1603-1 H13 I615 G12 1603-2 H12 I616 G4 2607 D10 I618 G12 2608 D9 I619 G12 2609 D9 I620 G12...
Alignments LC4.9E AB EN 135 8. Alignments Index of this chapter: 8.1 General Alignment Conditions 8.2 Hardware Alignments 8.3 Software Alignments Note: Figures below can deviate slightly from the actual situation, due to the different set executions. General: The Service Default Mode (SDM) and Service Alignment Mode (SAM) are described in chapter 5.
Page 136
EN 136 LC4.9E AB Alignments 8.3.1 SAM Menu 00035 LC4XEP1 1.14/S4XGNV 1.17 ERR 0 0 0 0 0 OP 000 057 140 032 120 128 000 . OP1 . Delta Cool Red . OP2 . Delta Cool Green -1 . OP3 .
Page 137
Alignments LC4.9E AB EN 137 8.3.4 ADC Gain and Grey Scale Alignment 8.3.5 Sound The table below shows a number of NVM settings used for • For NICAM sets: see paragraph 8.3.3. each model of TV set. Be sure to use the correct editor in the •...
Page 138
EN 138 LC4.9E AB Alignments Table 8-3 Option codes in detail, at bit level Option byte & bit table for restoring the TV set to its original Factory Default settings via the NVM Editor in the SAM menu Description of feature/option to be switched ON or OFF...
IBO zapper module. For a description of the original “IBO Zapper” is intended for use in combination with an TV sets (without an IBO zapper module), see the LC4.9E AA analogue TV chassis. manual, order code 3122 785 15432. The table below shows...
Page 140
EN 140 LC4.9E AB Circuit Descriptions, Abbreviation List, and IC Data Sheets PNx83xx MOJO were first sent to the Hercules input for e.g. teletext reinsertion purposes before they are passed on to the Scaler. The secundary MOJO output, which delivers CVBS signals, is...
Circuit Descriptions, Abbreviation List, and IC Data Sheets LC4.9E AB EN 141 9.10.2 Passive Standby State 9.11 Abbreviation List The set is in standby mode. The module is in off state. 0/6/12 SCART switch control signal on A/V board. 0 = loop through (AUX to TV), 6 9.10.3 Active Standby State...
Page 142
(Y/C) are reproduced LATAM LATin AMerica RGBHV Red, Green, Blue, Horizontal sync, LC04 Philips chassis name for LCD TV 2004 and Vertical sync project Read Only Memory Liquid Crystal Display Service Alignment Mode SandCastle: two-level pulse derived...
Page 143
Sound right SCART1 out SNDR-SC2-IN Sound right SCART2 out SNDR-SC2-OUT Sound right SCART2 out SOPS Self Oscillating Power Supply S/PDIF Sony Philips Digital InterFace; This is a consumer interface used to transfer digital audio SRAM Static RAM STBY STandBY SVHS...
EN 144 LC4.9E AB Circuit Descriptions, Abbreviation List, and IC Data Sheets 9.12 IC Data Sheets This section shows the internal block diagrams and pin layouts of ICs that are drawn as "black boxes" in the electrical diagrams (with the exception of "memory" and "logic" ICs).
Page 145
Circuit Descriptions, Abbreviation List, and IC Data Sheets LC4.9E AB EN 145 9.12.2 Diagram K6, TDA10046 (IC7600) Block Diagram AGC_TUN AGC_IF ANALOG DIGITAL FRONT-END ΔΣ CHANNEL ESTIMATION AND OFDM Dual AGC ΔΣ AND CORRECTION DEMODULATION OFDM Spectrum Fsamp Carrier Time...
Spare Parts List 10. Spare Parts List Set Levels per CTN 2053 2022 031 00308 22μF 20% 35V e Software (see Philips Service Website) 2054 2020 552 00216 220pF 5% 50V 0402 2055 2020 552 96621 1.5nF 10% 50V 0402...
EN 162 LC4.9E AB Revision List 11. Revision List Manual xxxx xxx xxxx.0 • First release. Manual xxxx xxx xxxx.1 • Chapter 7: PSU schematics and PWB’s [A] added. • Chapter 10: PSU parts list [A] added and software items updated.
Need help?
Do you have a question about the LC4.9E and is the answer not in the manual?
Questions and answers