Installation Instructions Gas Cooktop KM 320 ® ® To prevent accidents and machine damage, read these instructions before installation or use. M.-Nr. 05 403 561...
Page 2
WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. – Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
However, under certain circumstances it may be possible for an installation in not allowed these applications. Please contact the nearest Miele Dealer or the Miele Technical Service Department with specific requirements.
IMPORTANT SAFETY INSTRUCTIONS Safety distances above the Cooktops should not be installed above a dishwasher, washer, dryer, appliance freezer or refrigerator. The heat generated by cooktops could damage these appliances. Deep fat fryers must not be installed next to gas cooktops. Gas flames can ignite splattering oil.
Installation Setting the cooktop into place Securing the support brackets ^ Place the brackets, a, as shown. ^ After removing the protective backing, d, stick the supplied seal, c, under the edge of the cooktop. ^ Screw the gas regulator/adapter combination onto the nipple underneath the cooktop.
Page 8
Installation Important The cooktop must not be permanently sealed into the countertop when installed. The sealing strip under the edge of the cooktop provides a sufficient seal for the countertop. If the cooktop is sealed into position, the countertop or the appliance may be damaged if the cooktop needs to be removed for maintenance or service.
Electrical connection This appliance must be grounded This appliance is equipped with a according to local or national codes. three-prong grounding plug to prevent shock hazards. It should be All electrical work should be plugged directly into a properly performed by a qualified electrician grounded outlet.
Gas connection Installation and service must be The gas connection must be made performed by a qualified installer, in accordance with local codes or, in service agency or the gas supplier. the absence of local codes, with: In Massachusetts a licensed the National Fuel Gas Code, plumber / gas fitter is required.
If the appliance is to be connected to a type of gas other than it was originally configured for, both the regulator and burners must be converted. A conversion kit is available as an optional accessory from the Miele Technical Service Department.
Page 16
Alteration rights reserved / 2705 M.-Nr. 05 403 561 / 06 en - US...
Need help?
Do you have a question about the KM 320 and is the answer not in the manual?
Questions and answers