hit counter script
Sony DCR-VX2100 Adjustment Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Film Camera
  5. DCR VX2100 - Handycam Camcorder - 380 KP
  6. Adjustment manual

Sony DCR-VX2100 Adjustment Manual

Hide thumbs Also See for DCR-VX2100:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
DCR-VX2100/VX2100E
Ver 1.0 2003. 10
Revision History
Revision History
How to use
How to use
Acrobat Reader
Acrobat Reader
Link
Link
Before starting adjustment
Before starting adjustment
Adjusting items when replacing main parts and boards
Adjusting items when replacing main parts and boards
CAMERA SECTION ADJUSTMENT
CAMERA SECTION ADJUSTMENT
PREPARATIONS BEFORE ADJUSTMENT
PREPARATIONS BEFORE ADJUSTMENT
INITIALIZATION OF B,C,D,E,F,8 PAGE DATA
INITIALIZATION OF B,C,D,E,F,8 PAGE DATA
CAMERA SYSTEM ADJUSTMENTS
CAMERA SYSTEM ADJUSTMENTS
COLOR ELECTRONIC VIEWFINDER SYSTEM ADJUSTMENT
COLOR ELECTRONIC VIEWFINDER SYSTEM ADJUSTMENT
LCD SYSTEM ADJUSTMENT
LCD SYSTEM ADJUSTMENT
MECHANISM SECTION ADJUSTMENT
MECHANISM SECTION ADJUSTMENT
HOW TO ENTER RECORD MODE WITHOUT CASSETTE
HOW TO ENTER RECORD MODE WITHOUT CASSETTE
HOW TO ENTER PLAYBACK MODE WITHOUT CASSETTE
HOW TO ENTER PLAYBACK MODE WITHOUT CASSETTE
TAPE PATH ADJUSTMENT
TAPE PATH ADJUSTMENT
Contents of LEVEL 2 and LEVEL 3 Service Manual
CONTENTS
1. SERVICE NOTE
2. DISASSEMBLY
3. BLOCK DIAGRAMS
4. PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
5. REPAIR PARTS LIST
9-876-288-51
SECTION 6
ADJUSTMENTS
VIDEO SECTION ADJUSTMENT
VIDEO SECTION ADJUSTMENT
SERVICE MODE
SERVICE MODE
LEVEL 2
OVERALL
POWER
CD-512, JK-267, CK-140, PD-217, LA-028, SE-147, KP-013,
MK-016, MS-209, FK-088, FT-092, MI-050, LB-100, HL-013,
MA-430, DD-216, ZM-030, RM-091 BOARD, FP-194, FP-196,
FP-188, FP-189 FLEXIBLE
EXPLODED VIEWS
ELECTRICAL PARTS
Sony EMCS Co.
PREPARATIONS BEFORE ADJUSTMENTS
PREPARATIONS BEFORE ADJUSTMENTS
SYSTEM CONTROL SYSTEM ADJUSTMENT
SYSTEM CONTROL SYSTEM ADJUSTMENT
SERVO AND RF SYSTEM ADJUSTMENT
SERVO AND RF SYSTEM ADJUSTMENT
VIDEO SYSTEM ADJUSTMENTS
VIDEO SYSTEM ADJUSTMENTS
AUDIO SYSTEM ADJUSTMENTS
AUDIO SYSTEM ADJUSTMENTS
ADJUSTMENT REMOTE COMMANDER
ADJUSTMENT REMOTE COMMANDER
DATA PROCESS
DATA PROCESS
SERVICE MODE
SERVICE MODE
a
a
Published by DI CS Strategy Div.
RMT-811
ADJ
LEVEL 3
VC-358 BOARD,
FP-594 FLEXIBLE
a (VC-358 BOARD)
2003J1600-1
©2003.10

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DCR-VX2100 and is the answer not in the manual?

Questions and answers

Related Manuals for Sony DCR-VX2100

Summary of Contents for Sony DCR-VX2100

  • Page 1 MK-016, MS-209, FK-088, FT-092, MI-050, LB-100, HL-013, FP-594 FLEXIBLE MA-430, DD-216, ZM-030, RM-091 BOARD, FP-194, FP-196, FP-188, FP-189 FLEXIBLE 5. REPAIR PARTS LIST EXPLODED VIEWS ELECTRICAL PARTS a (VC-358 BOARD) 2003J1600-1 ©2003.10 Sony EMCS Co. 9-876-288-51 Published by DI CS Strategy Div.

  • Page 2: Table Of Contents

    DCR-VX2100/VX2100E TABLE OF CONTENTS ADJUSTMENTS 1-5. LCD SYSTEM ADJUSTMENT ··································· 6-31 VCO Adjustment (PD-217 board) ································· 6-32 Before starting adjustment ··············································· 6-1 Bright Adjustment (PD-217 board) ······························· 6-32 1-1. Adjusting items when replacing main parts and boards. ··· 6-2 Black Limit Adjustment (PD-217 board) ······················ 6-33 PSIG GRAY Adjustment (PD-217 Board) ····················...
  • Page 3 DCR-VX2100/VX2100E 2-2. IC301 TRX (RF) REC BIST Check ····························· 6-53 2-3. Processing after Completing Recording System Check ··· 6-53 3-5. AUDIO SYSTEM ADJUSTMENTS ···························· 6-54 Playback Level Check ··················································· 6-55 Overall Level Characteristics Check ····························· 6-55 Overall Distortion Check ··············································· 6-55 Overall Noise Level Check ············································...

  • Page 4: Adjustments

    DCR-VX2100/VX2100E SECTION 6 ADJUSTMENTS Before starting adjustment EVR Data Re-writing Procedure When Replacing Board The data that is stored in the repair board, is not necessarily correct. Perform either procedure 1 or procedure 2 or procedure 3 when replacing board.

  • Page 5: Adjusting Items When Replacing Main Parts And Boards

    DCR-VX2100/VX2100E 1-1. Adjusting items when replacing main parts and boards. • Adjusting items when replacing main parts When replacing main parts, adjust the items indicated by z in the following table. Note1: When replacing the drum assy., reset the data of page: 2, address: A2 to A4 to “00”. (Refer to “Record of Use check” of “5-4. SERVICE MODE”)
  • Page 6 DCR-VX2100/VX2100E • Adjusting items when replacing a board or EEPROM When replacing a board or EEPROM, adjust the items indicated by z in the following table. Board replacement Adjustment Adjustment Section Initialization Initialization of C, D, 8 page data of B, C, D, E,...

  • Page 7: Camera Section Adjustment

    DCR-VX2100/VX2100E 6-1. CAMERA SECTION ADJUSTMENT 1-1. PREPARATIONS BEFORE ADJUSTMENT (CAMERA SECTION) 1-1-1. List of Service Tools • Oscilloscope • Color monitor • Vectorscope • Regulated power supply • Digital voltmeter Ref. No. Name Parts Code Usage Auto white balance adjustment/check...

  • Page 8: Preparations

    DCR-VX2100/VX2100E 1-1-2. Preparations Note 1: For details of how remove the cabinet and boards, refer to “2. DISASSEMBLY”. Note 2: When performing only the adjustments, the lens block and boards Pattern box need not be disassembled. Connect the equipment for adjustments according to Fig. 6-1-3.
  • Page 9 DCR-VX2100/VX2100E [CONNECTION OF EQUIPMENT] Screw (M2 × 5), lock ace, p2 CPC-13 jig CPC cover (J-6082-443-A) Adjustment remote commander (RM-95) AC POWER AC IN ADAPTOR LANC jack Fig. 6-1-3.

  • Page 10: Precaution

    DCR-VX2100/VX2100E 1-1-3. Precaution 1. Setting the Switch Unless otherwise specified, set the switches as follows and perform adjustments without loading cassette. POWER switch (CF-4980 block) ......CAMERA 10. BACK LIGHT (FP-189 flexible) ........OFF DEMO MODE (Menu display) ........OFF 11.

  • Page 11: Initialization Of B, C, D, E, F, 8 Page Data

    DCR-VX2100/VX2100E 1-2. INITIALIZATION OF B, C, D, E, F, 8 PAGE DATA 1-2-1. INITIALIZATION OF C, D, 8 PAGE DATA 1. Initializing the C, D, 8 Page Data 2. Modification of C, D, 8 Page Data If the C, D, 8 page data has been initialized, change the data of the Note1: If “Initializing the C, D, 8 Page Data”...
  • Page 12 DCR-VX2100/VX2100E C Page Address Remark Address Remark Initial value Initial value 23 to 24 Fixed data-1 Fixed data-2 S VIDEO out Y level adj. Fixed data-1 S VIDEO out Cr level adj. Fixed data-2 S VIDEO out Cb level adj.

  • Page 13: Page Table

    DCR-VX2100/VX2100E 4. D Page Table 5. 8 Page Table Note: Fixed data-1: Initialized data. (Refer to “1. Initializing the C, D, 8 Note: Fixed data-1: Initialized data. (Refer to “1. Initializing the C, D, 8 Page Data”.) Page Data”.) Fixed data-2: Modified data. (Refer to “2. Modification of C, D, 8 Fixed data-2: Modified data.

  • Page 14: Initializing The B Page Data

    DCR-VX2100/VX2100E 1-2-2. INITIALIZATION OF B PAGE DATA Note: When reading the B page data, insert a “Memory Stick” into the “Memory Stick” slot. Switch setting: POWER ..............MEMORY 2. Modification of B Page Data 1. Initializing the B Page Data Note: If the B page data has been initialized, the following adjustments If the B page data has been initialized, change the data of the “Fixed...

  • Page 15: Modification Of E, F Page Data

    Note1: If “Initializing the E, F Page Data” is performed, all data of the E Page Data”.) page and F page will be initialized. (It is impossible to initialize a Note2: NTSC model : DCR-VX2100 single page.) PAL model : DCR-VX2100E Note2: If the E, F page data has been initialized, following adjustments need to be performed again.
  • Page 16 DCR-VX2100/VX2100E F Page Initial value Initial value Address Remark Address Remark NTSC PAL NTSC PAL 56 to 5C Fixed data-1 Fixed data-1 Zoom key center adj. Fixed data-2 5E to 5F Fixed data-1 FA to FC Fixed data-1 Fixed data-2...
  • Page 17 Page Data”.) Note2: Refer to “2. Modification of E, F Page Data” for the camera WB ND filter 2 compensation microprocessor version. Note3: NTSC model : DCR-VX2100 PAL model : DCR-VX2100E Color reproduction adj. (ND filter 2) Initial value Address...

  • Page 18: Camera System Adjustments

    DCR-VX2100/VX2100E 1-3. CAMERA SYSTEM ADJUSTMENTS Before perform the camera system adjustments, check that the specified values of “VIDEO SYSTEM ADJUSTMENT” are satisfied. 1. 27MHz Origin Oscillation Adjustment 2. Zoom Key Center Adjustment (VC-358 board) Set the A/D value center of the microprocessor to the center voltage Set the frequency of the clock for synchronization.

  • Page 19: Hall Adjustment

    DCR-VX2100/VX2100E 3. HALL Adjustment 4. Offset Adjustment For detecting the position of the lens iris, adjust AMP gain and Adjust so that the AGC OUT potential lies within the specified value offset. of the digital clamp. Subject Not required Subject...

  • Page 20: Flange Back Adjustment (Using Minipattern Box)

    DCR-VX2100/VX2100E 5. Flange Back Adjustment (Using Minipattern Box) The inner focus lens flange back adjustment is carried out automatically. In whichever case, the focus will be deviated during auto focusing/manual focusing. Subject Siemens star chart with ND filter for the minipattern box (Note2)

  • Page 21: Flange Back Adjustment (Using Flange Back Adjustment Chart And Subject More Than 500M Away)

    DCR-VX2100/VX2100E 6. Flange Back Adjustment (Using Flange Back Adjustment Chart and Subject More Than 500m Away) The inner focus lens flange back adjustment is carried out automatically. In whichever case, the focus will be deviated during auto focusing/manual focusing. 6-1. Flange Back Adjustment (1) 6-2.

  • Page 22: Flange Back Check

    DCR-VX2100/VX2100E 7. Flange Back Check Subject Siemens star (2.0m from the front of the protection glass) (Luminance : approx. 300 ± 50 lux) Measurement Point Check operation on TV monitor Measuring Instrument Specified Value Focused at the TELE end and WIDE end.

  • Page 23: Pre White Balance Data Input

    Note1: After the power is turned on, this adjustment can be done only Note1: After the power is turned on, this adjustment can be done only once. once. Note2: NTSC: DCR-VX2100 Note2: Check that the data of page: 6, address: 02 is “00”. If not, to page: PAL: DCR-VX2100E 6, address: 01, set data: 00, and press the PAUSE button.

  • Page 24: Max Gain Adjustment

    DCR-VX2100/VX2100E 11. MAX GAIN Adjustment 12. LV Standard Data Input Setting the minimum illumination. Adjust the normal coefficient of the light value. If it is not consistent, the image level required for taking subjects in Subject Clear chart low illuminance will not be produced (dark).

  • Page 25: White Balance Nd Filter 1 Compensation

    DCR-VX2100/VX2100E 13. White Balance ND Filter 1 Compensation 14. White Balance ND Filter 2 Compensation Compensate the white balance deviation when ND FILTER switch Compensate the white balance deviation when ND FILTER switch is “1”. is “2”. Subject Clear chart...

  • Page 26: Auto White Balance Adjustment

    DCR-VX2100/VX2100E 15. Auto White Balance Adjustment 16. Color Reproduction Adjustment (ND Filter OFF) Adjust to the proper auto white balance output data. When the ND FILTER switch is “OFF”, adjust the color difference If it is not correct, auto white balance and color reproducibility will matrix coefficient so that proper color reproduction is produced.

  • Page 27: Color Reproduction Adjustment (Nd Filter 1)

    DCR-VX2100/VX2100E 17. Color Reproduction Adjustment (ND Filter 1) 18. Color Reproduction Adjustment (ND Filter 2) When the ND FILTER switch is “1”, adjust the color difference When the ND FILTER switch is “2”, adjust the color difference matrix coefficient so that proper color reproduction is produced.

  • Page 28: White Balance Check

    DCR-VX2100/VX2100E 19. White Balance Check Processing after Completing Adjustments Subject Clear chart Order Page Address Data Procedure (Color bar standard picture frame) Filter Filter C14 for color temperature Set the data, and press PAUSE correction button. ND filter 1.0 and 0.3 (2 sheets) Set the data.

  • Page 29: Steady Shot Adjustment

    DCR-VX2100/VX2100E 20. Steady Shot Adjustment • This adjustment is performed only when replacing the angular velocity sensor. Although this adjustment need not be performed when the circuit is damaged, etc., check the operations. • Note down the sensitivity displayed on the angular velocity sensor of the repair parts.

  • Page 30: Steady Shot Adjustment (1)

    DCR-VX2100/VX2100E 20-1. Steady Shot Adjustment (1) Subject Pattern A (1.5m from the front of the lens) Measurement Point Video output terminal Measuring Instrument Oscilloscope (V period) Adjustment Page Adjustment Address Pattern A White Black White A4 size (297mm × 210mm)

  • Page 31: Steady Shot Adjustment (2)

    DCR-VX2100/VX2100E 20-2. Steady Shot Adjustment (2) Subject Pattern B (1.5m from the front of the lens) Measurement Point Video output terminal Measuring Instrument Oscilloscope (H period) Adjustment Page Adjustment Address Black Pattern B White White Falling edge of Falling edge of A4 size (297mm ×...

  • Page 32: Color Electronic Viewfinder System

    Specified Value 1) Select page: 2, address: 0E, and set data: 00. f = 15625 ± 30Hz (PAL) 2) Select page: 2, address: 0F, and set data: 00. Switch setting: Note1: NTSC: DCR-VX2100 LCD panel ..............Closed PAL: DCR-VX2100E [Adjusting connector]...

  • Page 33: Bright Adjustment (Vc-358 Board)

    DCR-VX2100/VX2100E 2. Bright Adjustment (VC-358 board) 3. Contrast Adjustment (VC-358 board) Set the D range of the RGB decoder used to drive the LCD to the Set the level of the VIDEO signal for driving the LCD to the specified specified value.

  • Page 34: White Balance Adjustment (Vc-358 Board)

    DCR-VX2100/VX2100E 4. White Balance Adjustment (VC-358 board) 1-5. LCD SYSTEM ADJUSTMENT Correct the white balance. If deviated, the reproduction of the EVF screen may degenerate. Note 1: The back light (fluorescent tube) is driven by a high voltage AC power supply. Therefore, do not touch the back light holder to...

  • Page 35: Vco Adjustment (Pd-217 Board)

    A2, A3 f = 15734 ± 30Hz (NTSC) Adjustment Address Specified Value f = 15625 ± 30Hz (PAL) A = 6.80 ± 0.05V Specified Value Note1: NTSC: DCR-VX2100 Adjusting method: PAL: DCR-VX2100E Order Page Address Data Procedure Set the data.

  • Page 36: Black Limit Adjustment (Pd-217 Board)

    (A) to the specified Set the data. value. Set the following data. Press PAUSE button. 5B: DCR-VX2100 (NTSC) Set the data. 53: DCR-VX2100E (PAL) Change the data and set the PSIG signal amplitude (A) to the specified value.

  • Page 37: Contrast Adjustment (Pd-217 Board)

    DCR-VX2100/VX2100E 5. Contrast Adjustment (PD-217 board) 6. Center Level Adjustment (PD-217 board) Set the level of the VIDEO signal for driving the LCD to the specified Set the video signal center level of LCD panel to an appropriate value. If deviated, the screen image will be blackish or saturated level.

  • Page 38: V-Com Adjustment (Pd-217 Board)

    DCR-VX2100/VX2100E 7. V-COM Adjustment (PD-217 board) 8. White Balance Adjustment (PD-217 board) Set the DC bias of the common electrode drive signal of LCD to the Correct the white balance. specified value. If deviated, the reproduction of the LCD screen may degenerate.

  • Page 39: Mechanism Section Adjustment

    DCR-VX2100/VX2100E 6-2. MECHANISM SECTION ADJUSTMENT On the mechanism section adjustment 2-3. TAPE PATH ADJUSTMENT For details of mechanism section adjustments, checks, and replacement of mechanism parts, refer to the separate 1. Preparation for Adjustment volume “DV MECHANICAL ADJUSTMENT MANUAL 1) Clean the tape running side (tape guide, drum, capstan shaft, C Mechanism ”.

  • Page 40: Video Section Adjustments

    DCR-VX2100/VX2100E 6-3. VIDEO SECTION ADJUSTMENTS NTSC model : DCR-VX2100 PAL model : DCR-VX2100E 3-1. PREPARATIONS BEFORE ADJUSTMENTS Use the following measuring instruments for video section adjustments. 3-1-1. Equipment Required TV monitor Oscilloscope (dual-phenomenon, band above 30 MHz with delay mode) (Unless specified otherwise, use a 10 : 1 probe.) Frequency counter Pattern generator with video output terminal.

  • Page 41: Precautions On Adjusting

    DCR-VX2100/VX2100E 3-1-2. Precautions on Adjusting Note 1: Setting the “Forced VTR Power ON” mode (VTR mode) 1) Select page: 0, address: 01, and set data: 01. 1) The adjustments of this unit are performed in the VTR mode 2) Select page: D, address: 10, set data: 02, and press the PAUSE or camera mode.

  • Page 42: Adjusting Connectors

    DCR-VX2100/VX2100E 3-1-3. Adjusting Connectors Some of the adjusting points of the video section are concentrated at VC-358 board CN007. Connect the measuring instruments via CN007 the CPC-13 jig (J-6082-443-A). The following table lists the pin numbers and signal names of CN007.

  • Page 43: Alignment Tapes

    DCR-VX2100/VX2100E 3-1-5. Alignment Tapes Use the alignment tapes shown in the following table. Use tapes specified in the signal column of each adjustment. Name Tracking standard (XH2-1) Tape path adjustment SW/OL standard (XH2-3) Switching position adjustment Audio operation check Audio system adjustment...

  • Page 44: System Control System Adjustment

    DCR-VX2100/VX2100E 3-2. SYSTEM CONTROL SYSTEM ADJUSTMENT Obtain D and H corresponding to D from Table 6-3-2. Example: If D is “77881”. –65536=12345 1. Initialization of B, C, D, E, F, 8 Page Data If the B, C, D, E, F, 8 page data is erased due to some reason, perform “1-2.
  • Page 45 DCR-VX2100/VX2100E Hexa- Hexa- Hexa- Hexa- Hexa- Hexa- Hexa- Hexa- Decimal Decimal Decimal Decimal Decimal Decimal Decimal Decimal decimal decimal decimal decimal decimal decimal decimal decimal 0000 8192 2000 16384 4000 24576 6000 32768 8000 40960 A000 49152 C000 57344 E000...

  • Page 46: Battery End Adjustment

    DCR-VX2100/VX2100E 3. Battery End Adjustment Set the battery end voltage. If the voltage is incorrect, the life of the battery will shorten. The image at the battery end will also be rough. Mode Camera recording Subject Arbitrary Measurement Point Display data of page: 2, address: 5D...

  • Page 47: Servo And Rf System Adjustment

    DCR-VX2100/VX2100E 3-3. SERVO AND RF SYSTEM ADJUSTMENT 2. T reel FG Duty Adjustment (VC-358 Board) Adjust the take-up reel FG signal duty cycle to an appropriate value Before perform the servo and RF system adjustments, check that so that the correct T-reel FG signal is obtained.

  • Page 48: Agc Center Level And Apc & Aeq Adjustment

    DCR-VX2100/VX2100E 4. Switching Position Adjustment (VC-358 Board) 5. AGC Center Level and APC & AEQ Adjustment 5-1. Preparations before adjustments Mode VTR playback Mode Camera recording Signal SW/OL reference tape (XH2-3) Subject Arbitrary Measurement Point Display data of page: 3, address: 03...

  • Page 49: Apc & Aeq Adjustment (Vc-358 Board)

    DCR-VX2100/VX2100E 5-3. APC & AEQ Adjustment (VC-358 Board) 6. PLL f & LPF f Final Adjustment (VC-358 Board) Mode Playback Mode VTR stop Signal Recorded signal at “Preparations Signal Arbitrary before adjustments” Measurement Point Display data of page: 3, address: 03...

  • Page 50: Video System Adjustments

    DCR-VX2100/VX2100E 3-4. VIDEO SYSTEM ADJUSTMENTS 2. S VIDEO OUT Y Level Adjustment (VC-358 Board) Before perform the video system adjustments, check that the specified value of “27MHz Origin Oscillation Adjustment” of Mode Camera “CAMERA SYSTEM ADJUSTMENT” is satisfied. Subject Arbitrary...

  • Page 51: S Video Out Chroma Level Adjustment

    DCR-VX2100/VX2100E 3. S VIDEO OUT Chroma Level Adjustment 4. VIDEO OUT Y, Chroma Level Check (VC-358 Board) (VC-358 Board) Mode Camera Mode Camera Subject Arbitrary Subject Arbitrary Measurement Point VIDEO jack (75Ω terminated) Measurement Point Chroma signal terminal of S VIDEO...

  • Page 52: Bist Check

    Note1: Perform the following checks in the playback mode. is normal. Note2: Use the AC power adaptor or the battery (Info LITHIUM L series). Note3: NTSC model : DCR-VX2100 1-4. IC301 VFD PB BIST Check PAL model : DCR-VX2100E • EX Y BIST Check 1-2.
  • Page 53 DCR-VX2100/VX2100E • EVF Y BIST Check • EVF Cb BIST Check Order Page Address Data Procedure Order Page Address Data Procedure Set the data, and press PAUSE Set the data, and press PAUSE button. button. Set the data, and press PAUSE Set the data, and press PAUSE button.

  • Page 54: Ic301 Encoder Bist Check

    Set the data. Set the data, and press PAUSE Set the data, and press PAUSE button. button. Set the data, and press PAUSE Note: NTSC model : DCR-VX2100 button. PAL model : DCR-VX2100E Set the data, and press PAUSE button.

  • Page 55: Processing After Completing Playback System Check

    DCR-VX2100/VX2100E • ENCODER Ca BIST Check 1-6. Processing after Completing Playback System Check Order Page Address Data Procedure Set the data, and press PAUSE Order Page Address Data Procedure button. Set the data. Set the data, and press PAUSE button.

  • Page 56: Recording System Check

    DCR-VX2100/VX2100E 2. Recording System Check 2-1. Preparations for recording 2-3. Processing after Completing Recording System Note: NTSC model : DCR-VX2100 Check PAL model : DCR-VX2100E Order Page Address Data Procedure Order Page Address Data Procedure Set the data, and press PAUSE Playback the BIST check tape.

  • Page 57: Audio System Adjustments

    DCR-VX2100/VX2100E 3-5. AUDIO SYSTEM ADJUSTMENTS Switch setting: MIC/LINE ................MIC MIC LEVEL (Menu) ............AUTO [Connection of Audio System Measuring Devices] Connect the audio system measuring devices as shown in Fig. 6-3-11. Main unit Recording (Camera mode) 600 Ω Audio oscillator...

  • Page 58: Playback Level Check

    5. Overall Separation Check level during EMP OFF. Mode Camera recording and playback Signal 400Hz, –66dBs signal: MIC jack Note: NTSC model : DCR-VX2100 <right> [left] PAL model : DCR-VX2100E (Connect the MIC jack <left> [right] to GND) Checking Method: Measurement Point Audio <left>...

  • Page 59: Service Mode

    DCR-VX2100/VX2100E 6-4. SERVICE MODE 4-1. ADJUSTMENT REMOTE COMMANDER 2. Precautions upon using the adjustment remote commander The adjustment remote commander is used for changing the calculation coefficient in signal processing, EVR data, etc. The Mishandling of the adjustment remote commander may erase the adjustment remote commander performs bi-directional correct adjustment data at times.

  • Page 60: Data Process

    DCR-VX2100/VX2100E 4-2. DATA PROCESS The calculation of the DDS display and the adjustment remote commander display data (hexadecimal notation) are required for obtaining the adjustment data of some adjustment items. In this case, after converting the hexadecimal notation to decimal notation, calculate and convert the result to hexadecimal notation, and use it as the adjustment data.

  • Page 61: Service Mode

    DCR-VX2100/VX2100E 4-3. SERVICE MODE 2-1. EMG Code (Emergency Code) 1. Setting the Test Mode Codes corresponding to the errors which occur are written in Page D Address 10 addresses F4, F8 and FC. The type of error indicated by the code are shown in the following table.

  • Page 62: Msw Code

    DCR-VX2100/VX2100E 2-2. MSW Code MSW when errors occur: Information on MSW (mode SW) when errors occur MSW when movement starts: Information on MSW when movements starts when the mechanism position is moved (When the L motor is moved) MSW of target of movement:...

  • Page 63: Bit Value Discrimination

    DCR-VX2100/VX2100E 3. Bit value discrimination Bit values must be discriminated using the display data of the adjustment remote commander for following items. Use the table below to discriminate if the bit value is “1” or “0”. Display on the adjustment remote commander...

  • Page 64: Switch Check (2)

    DCR-VX2100/VX2100E 5. Switch check (2) Page 2 Address 5F to 67 Using method: Select page: 2, address: 5F to 67. By discriminating the display data, the pressed key can be discriminated. Data Address 00 (00 to 0A) 19 (0B to 24)

  • Page 65: Record Of Use Check

    DCR-VX2100/VX2100E 7. Record of Use check Note: When replacing the drum assembly, initialize the data of address: A2 to AA. Page 2 Address A2 to AA Address Function Remarks Minutes Drum rotation counted time (BCD code) Hour (L) 10th place digit and 1st place digit of counted time (decimal digit)
  • Page 66 DCR-VX2100/VX2100E 〈 〉 FOR CAMERA COLOR REPRODUCTION ADJUSTMENT Take a copy of CAMERA COLOR REPRODUCTION FRAME with a clear sheet for use. DCR-VX2100/VX2100E 6-63E...
  • Page 67 [Description of main button functions on toolbar of the Adobe Acrobat Reader Ver5.0 (for Windows)] Toolbar Printing a text Reversing the screens displayed once • To reverse the previous screens (operation) one by one, click 1. Click the Print button 2.
  • Page 68 Reverse 987628851.pdf Revision History S.M. Rev. Ver. Date History Contents issued 2003.10 Official Release — —...

This manual is also suitable for:

Dcr-vx2100eRmt-811

Table of Contents