Makita DJV142 Instruction Manual
Cordless jig saw
Hide thumbs
Also See for DJV142:
- Instruction manual (81 pages) ,
- Instruction manual (65 pages) ,
- Instruction manual (77 pages)
Related Manuals for Makita DJV142
Summary of Contents for Makita DJV142
- Page 1 INSTRUCTION MANUAL Cordless Jig Saw DJV142 DJV182 014104 IMPORTANT: Read Before Using.
-
Page 2: Specifications
European determined according to EN60745: Directives, Waste Electric Electronic Equipment and Batteries and Model DJV142 Accumulators and Waste Batteries and Work mode : cutting boards Accumulators and their implementation Vibration emission (a ) : 7.0 m/s in accordance with national laws, electric Uncertainty (K) : 1.5 m/s... -
Page 3: General Power Tool Safety Warnings
(grounded) power tools. Unmodified plugs and matching outlets will EC Declaration of Conformity reduce risk of electric shock. Makita declares that the following Machine(s): Avoid body contact with earthed or grounded Designation of Machine: surfaces such as pipes, radiators, ranges and Cordless Jig Saw refrigerators. - Page 4 13. Remove any adjusting key or wrench before 25. Use power tools only with specifically turning the power tool on. A wrench or a key designated battery packs. Use of any other left attached to a rotating part of the power tool battery packs may create a risk of injury and fire.
- Page 5 Always switch off and wait for the blade to Do not store the tool and battery cartridge in come to a complete stop before removing the locations where the temperature may reach or exceed 50 ﾟ C (122 ﾟ F). blade from the workpiece.
-
Page 6: Functional Description
Battery protection system FUNCTIONAL DESCRIPTION (Lithium-ion battery with star marking) CAUTION: 1. Star marking Always be sure that the tool is switched off and the • battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge 1. - Page 7 Lighting up the lamps Position Cutting action Applications CAUTION: For cutting mild steel, Do not look in the lamp or see the source of lamp directly. Straight line stainless steel and plastics. • cutting action For clean cuts in wood To turn on the lamp, press the lock switch.
- Page 8 ASSEMBLY 1. Jig saw blade CAUTION: Always be sure that the tool is switched off and the • battery cartridge is removed before carrying out any work on the tool. Installing or removing saw blade CAUTION: 014119 To remove the blade, push the tool opener forward as Always clean out all chips or foreign matter •...
-
Page 9: Dust Extraction
1. Anti-splintering cleaner device 2. Base 014117 Then connect a Makita vacuum cleaner to the dust nozzle. 014121 For splinter-free cuts, the anti-splintering device can be OPERATION used. To install the anti-splintering device, move the tool base all the way forward and fit it from the back of tool CAUTION: base. - Page 10 With the base tilted, you can make bevel cuts at any Cutouts angle between 0° and 45° (left or right). Cutouts can be made with either of two methods A or B. A) Boring a starting hole: 1. Base 2. Hex wrench 1.
-
Page 11: Metal Cutting
Metal cutting 1. Fence guide Always use a suitable coolant (cutting oil) when cutting 2. Threaded knob metal. Failure to do so will cause significant blade wear. 3. Circular guide pin The underside of the workpiece can be greased instead of using a coolant. -
Page 12: Maintenance
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Jig saw blades • Hex wrench 4 • Rip fence (guide rule) set •... - Page 16 Makita Jan-Baptist Vinkstraat 2, 3070, Belgium Makita Corporation Anjo, Aichi, Japan www.makita.com 885228A225...
Need help?
Do you have a question about the DJV142 and is the answer not in the manual?
Questions and answers