12. ENVIRONMENT CONCERNS ..........15 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler –...
ENGLISH SAFETY INFORMATION Before the installation and use of the ap- • The first time you use the appliance, pliance, carefully read the supplied in- make sure that there is no leakage. structions. The manufacturer is not re- • The water inlet hose has a safety valve sponsible if an incorrect installation and and a sheath with an inner mains ca- use causes injuries and damages.
Page 4
13 amp ASTA (BS • Do not drink and play with the water in 1362) fuse. the appliance. • Do not remove the dishes from the 1.3 Use appliance until the programme is completed. There can be detergent •...
ENGLISH 2. PRODUCT DESCRIPTION Upper spray arm 2.1 Light beam Lower spray arm • When a programme operates, a red Filters light beam shows on the floor below the appliance door. When the pro- Rating plate gramme is completed, the red light Salt container changes to a green light.
Delay button Indicators Programme buttons Function buttons Indicators Description Salt indicator. This indicator is off while the programme oper- ates. Rinse aid indicator. This indicator is off while the programme operates. Multitab indicator. 4. PROGRAMMES Pro- Degree of Programme...
ENGLISH 6) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and bad odours to come out from the appliance. Do not use detergent with this programme. 5. OPTIONS Activate or deactivate the multi- 6.
6. BEFORE FIRST USE 1. Make sure that the set level of the 5. Processing residues can stay in the water softener agrees with the water appliance. Start a programme to re- hardness in your area. If not, adjust move them.
ENGLISH Electronic adjustment • The indicator of function button (A) continues to flash. 1. Press the on/off button to activate • The acoustic signals operate, e.g. the appliance. Make sure that the ap- five intermittent acoustic signals = pliance is in setting mode. Refer to level 5.
10 www.aeg.com 7. DAILY USE 1. Open the water tap. • If the rinse aid indicator is on, fill the rinse aid dispenser. 2. Press the on/off button to activate the appliance. Make sure that the ap- 3. Load the baskets.
ENGLISH • When the countdown is completed, At the end of the programme the programme starts. When the programme is completed, an intermittent acoustic signal operates and Opening the door while the the display shows 0. appliance operates 1. Press the on/off button to deactivate the appliance.
12 www.aeg.com • To remove easily remaining burned your area. Refer to the instructions on food, soak pots and pans in water be- the packaging of the products. fore you put them in the appliance. • Detergent tablets do not fully dissolve •...
ENGLISH 9.1 Cleaning the filters Turn the filter (A) counterclockwise and remove it. To disassemble the filter (A), pull apart (A1) and (A2). Remove the filter (B). Wash the filters with water. Put the filter (B) to its initial position. Make sure that it assembles correct- ly under the two guides (C).
Page 14
14 www.aeg.com • WARNING! - The appliance does not drain Deactivate the appliance before the water. you do the checks. • - The anti-flood device is on. Problem Possible solution You cannot activate the appli- Make sure that the mains plug is connected ance.
ENGLISH Refer to ‘HINTS AND TIPS’ for • The indicators of function buttons other possible causes. (A) and (C) go off. • The indicator of function button (B) Activating the rinse aid continues to flash. • The display shows the setting of dispenser with the multitab the rinse aid dispenser.
Need help?
Do you have a question about the F55402VI0P and is the answer not in the manual?
Questions and answers