Page 2
5. Do not operate this appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner. Return the Coffee Machine to the Philips Norelco Service Location for examination, repair or adjustment. 6. Use this appliance only for its intended purpose as described in this manual.
Page 3
SPECIAL POLARIZED PLUG INSTRUCTIONS This Philips Coffee Machine has a polarized plug (one blade is wider than the other) as an added safety feature. To reduce the risk of electric shock: - Plug will fit into polarized outlet only one way.
Page 4
WARNING: - To avoid risk of personal injury or damage to property as a result of overflow, be sure that the cup or mug is centered under the coffee outflow unit during the brew cycle. - Brewed coffee and coffee pods are very hot. Handle with care to avoid scalding.
TABLE OF CONTENTS General description Introduction Preparing the machine for use Brewing coffee Cleaning Descaling Storage Assistance Troubleshooting Warranty...
General description (Fig. 1) Water reservoir Grip area Outflow valve Sealing ring Water distribution disc 1-cup pod holder q 2-cup pod holder qq Cover of coffee spout Coffee spout Coffee collector Cup tray Drip tray 1-cup button q Water level light rings (HD7826, HD7824 only) On/off button with indicator light 2-cup button qq/...
Using more than 250 years of coffee expertise Douwe Egberts has roasted and ground specially selected coffee beans that, when prepared using a special brewing method co-developed with Philips, ensure a full, smooth taste and delicious foam layer. This joint creation, known as the SENSEO...
Page 8
Fill the water reservoir with cold water up to the MAX indication and put it back onto the machine. Release the lid by moving the lever upwards. Open the lid. Put the 1-cup pod holder q or the 2-cup pod holder qq in the machine without pod(s).
Clean the water reservoir thoroughly in hot water, if necessary with some dish soap. Now your Philips SENSEO coffee machine is ready for use. Brewing coffee Fill the water reservoir with cold water up to the MAX indication and put it back onto the machine.
Page 10
Press the on/off button 3. The indicator light blinks slowly while the water is heating up. Heating up takes approx. 75 seconds. The coffee machine is ready for use when the indicator light burns continuously. If the indicator light blinks rapidly, the water reservoir does not contain enough water for brewing one cup of coffee.
Page 11
When this happens, the next cup will only be partly filled. Type HD7820 only: if the cups are only half full when the machine stops brewing, there was not enough water left in the water reservoir to brew for one 8 oz.
two cups. To obtain two full cups, fill the water reservoir and press the 1-cup button q. The two cups will then be filled completely. Note: If you only get a small quantity of coffee or no coffee at all out of the machine, you have not flushed the machine properly before first use.
Page 13
You can disassemble the coffee spout for more thorough cleaning! Clean the coffee spout, the coffee collector and the drip tray in hot water, if necessary with some dish soap, or in the dishwasher. Hold the cup tray in your hand while cleaning it with hot water, if necessary with some dish soap.
Do not use an object with sharp edges to clean the water inlet on the machine. Rinse the parts with fresh water after cleaning and put them back into the machine. Clean the water distribution disc with a moist cloth. Be careful when you do this;...
Press the on/off button 3 (1) and subsequently press buttons the 1-cup button q and the 2-cup button qq/ time (2). The machine fills itself with water from the water reservoir. While this happens, water comes out of the spout. When the flushing cycle is finished, the machine switches itself off. During the flushing cycle, the machine produces more noise than during a regular brewing cycle Never interrupt the flushing cycle halfway.
This coffee machine has no other user-serviceable parts. Any other service should be performed by the Philips Norelco Service location. Storage If the coffee machine has already been used and therefore has been flushed with water, it may only be used and stored in a frost-free place to prevent it from becoming damaged.
Page 17
This may cause water that normally ends up in the water reservoir to leak out of the machine. In all other cases, contact the Philips Norelco Service Location. The coffee spout can only be taken out after the coffee collector has been removed.
Page 18
2-cup pod holder qq. Use 1 pod in combination with the 1-cup pod holder q. Contact the Philips Norelco Service Location.. Make sure that: you have used the correct number of pods and have pressed the right button.
NO RESPONSIBILITY IS ASSUMED FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. In order to obtain warranty service, simply ship the product postage prepaid to the Philips Norelco Service Location (information available online at www.philips.com/norelco or at 1-866-47-676). It is suggested that for your protection, you return shipments of product by insured mail, insurance prepaid.
Need help?
Do you have a question about the HD7820 and is the answer not in the manual?
Questions and answers