Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Philips MCL1801 Series
Summary of Contents for Philips MCL1801 Series
- Page 1 MCL1801 FAMILY LCD 18” COLOR MONITOR User’s Manual Copyright © 2002 FIMI S.r.l. Saronno - Italy All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner Printed in Italy (Rev. 1.1)
-
Page 2: Fcc Notice
Copyright © This manual is copyrighted with all rights reserved. Under the copy rights law, this manual may not be copied, in whole or part, without written consent of Philips. Under the law, copying includes translating into another language or format. - Page 3 INTRODUCTION The FIMI Medical Grade MCL1801 Medical is a color active matrix, liquid crystal display exclusively designed for medical applications. The monitor can be used for general medical viewing requiring high level color image quality, as well as in the Control Stations of Patient Monitoring, with a resolution of 1280 x 1024, and can accept an analogue signal input as well as a digital input.
-
Page 4: Table Of Contents
INPUT INSTRUCTION...13 CONTROL PANEL DESCRIPTION...14 (OSD) ON SCREEN DISPLAY...15 menu structure...15 OSD key functions...16 OSD controls...16 MCL1801 ...8 main menu...16 information...17 image adjust...17 horizontal position...18 vertical position...18 scale / center...18 image Enhancement...18 ABC selection...18... -
Page 5: Technical Information
80% ( Maximum Wet-Bulb should be 39 °C and No condensation ) Shock Half sine wave: 50G 11msec. ;X+/-, Y+/-, Z+/- (total 6 Directions), Each two time shock. DSUB-15 connection for Separate Sync Video Signal or SOG Video Signal. DVI-D connection for TMDS signal link standard version. MCL1801... -
Page 6: Dimensions
DIMENSIONS 197.78 306.02 MCL1801... - Page 7 DIMENSIONS MCL1801...
-
Page 8: Installation
If you ordered the monitor with the resistive touchscreen option, the following items should also be included: ● User’s manual of touchscreen ● Touchscreen cable PEDESTAL (standard) With the built-in pedestal you can tilt the monitor for a most comfortable viewing angle shown in fi gure 8a. MCL1801 5° 15° fi g. 8a... -
Page 9: Mounting Instruction
The pedestal must be fi xed at monitor with N° 6 screws M3x10 (included into the BOX) as shown in fi gure 9a. ARM VESA PLATE fi g. 9b An arm with VESA (100x100) interface must be fi xed at monitor with N° 4 screws M4x10 as shown in fi gure 9b. MCL1801... -
Page 10: Connecting Instruction
fi g 10b Insert the plug end of the power cord into a grounded wall outlet. For added protection, use a surge protector between the AC adapter and the electrical wall outlet to prevent sudden current variations from reaching the monitor MCL1801... -
Page 11: Connecting Analog Video
Turn the monitor on fi rst, and then turn on the computer. CONNECTING DIGITAL VIDEO (DVI) With the power the computer and the monitor turned off, connect the supplied video cable from the monitor to the computer’s video port (see fi g. 11b) fi g. 11a fi g. 11b MCL1801... -
Page 12: Connecting The Optional Touchscreen
RS-232 serial port using the proper cable (see fi g. 12a) fi g. 12a NOTE: Follow the instructions included on the enclosed CD for installing the Touchscreen drivers on your system. Following driver software installation, calibrate your Touchscreen to the system following the procedure described on the enclosed CD. MCL1801... -
Page 13: Input Instruction
Pin 18 : D0_RX + (T.M.D.S.) Pin 19 : GND (Data 0 shield) Pin 20 : N.C. Pin 21 : N.C. Pin 22 : GND (Clock shield) Pin 23 : CK_RX + (T.M.D.S.) Pin 24 : CK_RX - (T.M.D.S.) fi g.13a MCL1801... -
Page 14: Control Panel Description
- MENU SELECT - / BRIGHTNESS Recall to 200 Cd/m² - MENU SELECT + - ENTER (Store/Source-Select) Light sensor GREEN= 200 cd/m² / Power-on < 200 cd/m² ORANGE= Stand-by Brightness Adjust - Brightness Adjust + Menu select - MCL1801 menu Enter Menu select + fi g. 14a Power Switch... -
Page 15: (Osd) On Screen Display
EXIT ├───── NORMAL └───── DOUBLE ├───── 10 Sec. ├───── 20 Sec. ├───── 30 Sec. ├───── 45 Sec. ├───── 60 Sec. ├───── 90 Sec. ├───── 120 Sec. └───── DISABLED ├────────────── ENABLED ├────────────── DISABLED └────────────── ONLY ONCE ├────────────── ENABLED └────────────── DISABLED MCL1801... -
Page 16: Osd Key Functions
Languages OSD Settings Video Source Keyboard Option Exit MCL1801 OSD KEY FUNCTIONS Description It activates the OSD MAIN MENU if this is not active, otherwise selects and executes a desired OSD Special Function. When main menu or sub-menu is active, it allows to move or scroll to the previous (upper) item or decrement the magnitude of the parameter. -
Page 17: Information
6.2.0 Information 1) Press Enter button when the Information is highlighted on Main menu. The Information window appears. MCL1801 Model Ver CO.62-DO.62 Firmware Release h00002 Operating Hours Video timing number 3) To press Enter buttton to return to Main Menu. -
Page 18: Horizontal Position
1) Press Enter button when the Image Enhancement is highlighted on Image Adjust. The Image Enhancement window appears. 2) Press the Menu + or Menu - button until the desired item is highlighted. MCL1801 Image Adjust Horizontal Position Vertical position... -
Page 19: Transfer Function
3) Press the Enter button to confi rm your selection and return to Image Enhancement window 6.3.7 Advanced 1) Press Enter button when the Adavanced is highlighted on Main Menu The Advanced window appears. ABC Selection ABC Off ABC Reduced ABC Full Transfer Function 6500° K 7600° K 9300° K DICOM MCL1801... -
Page 20: Phase Adjust
Note: It is necessary to use video pattern dedicated to abtain the best result 3) When the position is adjusted, press the Enter buton to return to Advanced window 4) To select Exit and press again Enter button to return to Image Adjust or select Service. MCL1801 Advanced Phase Adjust... -
Page 21: Service
3) Press the Enter button to confi rm your selection and return to Auto-Setup Options window Service Offset Red Adjust Offset Green Adjust Offset Blue Adjust Gain Red Adjust Gain Green Adjus Gain Blue Adjust Store Video Exit Auto-Setup Options Auto-Setup On Modeset Auto-Clock Feature Exit MCL1801... -
Page 22: Auto-Clock Feature
1) Press Enter button when the Auto-Level is highlighted on Advanced. To perform an automatic calibration of the video signal. Valid only DSUB-SOG and DSUB video source. 2) Select Exit and press again Enter button to return to Image Adjust. MCL1801 Auto-Setup On Modest Enabled Disabled... -
Page 23: Restore Factory Preset
2) Press the Menu + or Menu - button until the desired item is highlighted. Languages English Français Deustch Español Italiano OSD Settings OSD Position OSD Size OSD Transparency OSD Timeout Exit OSD Position Horizontal Position Vertical position Exit MCL1801... -
Page 24: Osd Position
2) Press the Adjust + or Adjust - button until the desired item is highlighted. Normal Standard dimensions Double Double dimension 3) Press the Enter button to confi rm your selection and return to OSD Settings window MCL1801 OSD Position Horizontal Position Vertical position... -
Page 25: Osd Size
OSD Settings OSD Position OSD Size OSD Transparency OSD Timeout Exit OSD Timeout 10 Sec. 20 Sec. 30 Sec. 45 Sec. 60 Sec. 90 Sec. 120 Sec. Disabled Video Source DSUB-SOG (Green Input) DSUB (Ht. and Vt. Sync.) Exit MCL1801... -
Page 26: Keyboard Option
○ Brightness + ○ Menu - The dialog (Fig. 26a) will disappear any time a wrong key will be pressed. For every right key pressed a “plus” characters appears in dialog of Fig. 26a. MCL1801 Check Input Signal (XXX) Keyboard Option... - Page 27 INTENTIONALLY LEFT BLANK...
- Page 28 3119 206 1407.1...
Need help?
Do you have a question about the MCL1801 Series and is the answer not in the manual?
Questions and answers