hit counter script
Philips Hudson2 200P3 Service Manual
  1. Manuals
  2. Brands
  3. Philips Manuals
  4. Monitor
  5. Hudson2 200P3
  6. Service manual
Philips Hudson2 200P3 Service Manual

Philips Hudson2 200P3 Service Manual

20" tft lcd colour monitor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
20" TFT LCD Colour Monitor- Hudson2 200P3
Service
Service
Service
DDC/Power saving/Auto Picture Adjustment
Description
Important Safety Notice ---------------------------------- 2
Technical Data ------------------------------------------ 3~4
Connection to PC, Front Control------------------------ 5
Front Control,Base,Accessory Pack------------------- 6
Settings using the OSD menu---- -- -------------------- 7
OSD Attention signals-------------------------------------9
OSD menu tree - Analog---------------------------------10
OSD menu tree - Digital----------------------------------11
OSD Lock/Unlock, Aging mode------------------------ 12
Clock & Phase Adjustments-----------------------------13
DDC Instructions------------------------------------- 14~20
DDC Hex Data---------------------------------------- 21~22
Serinal number application------------------------------23
Wiring Diagram--------------------------------------------24
Instructions------------------------------ 25~26
Warning and Notes----------------------------------------27
Electrical Instruction------------------ ---------------28~30
Block Diagram----------------------------------------------31
Scaler Panel(Components &Copper track)------32~33
ANY PERSON ATTEMPTING TO SERVICE THIS CHASSIS MUST FAMILIARIZE HIMSELF WITH THE CHASSIS
AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN SERVICING ELECTRONIC
EQUIPMENT CONTAINING HIGH VOLTAGES.
CAUTION: USE A SEPARATE ISOLATION TRANSFORMER FOR THIS UNIT WHEN SERVICING.
REFER TO BACK COVER FOR IMPORTANT SAFETY GUIDELINES
Published by BCU Monitor
Printed in Taiwan

TABLE OF CONTENTS

Page
SAFETY NOTICE
Copyright reserved
Subject to modification
Description
Scaler Diagram---------------------------------------34~42
Power Panel(C.B.A.)------------------------------------ 43
Power Diagram------------------------------------------- 44
Audio &Keypad Panel----------------------------------- 45
Audio & Mic Preamp Diagram---------------------46~47
Phone Jack Board(C.B.A.),&Diagram----------- 48~49
Inverter Panel(C.B.A.)-----------------------------------50
Inverter Diagram(AMBIT)-------------------------- 51~52
Exploded View ------------------------------------------- 54
parts list--------------------------------55
Spare parts list-------------------------------------- 56~59
Difference Parts List-------------------------------------60
Repair Flow Chart-----------------------------------61~63
Repair Tips------------------------------------------------64
CA110 Application----------------------------------65~73
Firmware upgrade for CPU------------------------74~76
General Product Specification--------------------77~99
Safety Test Requirements-----------------------------100
General troubleshooting Guide---------------------------
Oct , 03 2002
200P3G/00C
Horizontal frequencies
30 - 82 kHz
Page
GB
3138 106 10237

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Hudson2 200P3 and is the answer not in the manual?

Questions and answers

Related Manuals for Philips Hudson2 200P3

Summary of Contents for Philips Hudson2 200P3

  • Page 1: Table Of Contents

    20" TFT LCD Colour Monitor- Hudson2 200P3 Service Service Service DDC/Power saving/Auto Picture Adjustment 200P3G/00C Horizontal frequencies 30 - 82 kHz TABLE OF CONTENTS Description Page Description Page Important Safety Notice ---------------------------------- 2 Scaler Diagram---------------------------------------34~42 Technical Data ------------------------------------------ 3~4 Power Panel(C.B.A.)------------------------------------ 43...

  • Page 2: Important Safety Notice

    Under no circumstances should the original design be modified or altered without written permission from Philips. Philips assumes no liability, express or implied, arising out of any unauthorized modification of design. Servicer assumes all liability. * Broken Line...

  • Page 3: Technical Data

    Technical Data Hudson2 200P3 Go to cover page Technical Specifications Physical Specifications LCD PANEL Dimension (WxHxD) :488 x 459 x220 mm (incl. Pedestal) Type :TFT LCD Weight :10.0 Kg Screen size :20.1" /51cm Tilt / Swivel :-5 ~ 25 / + - 175 Pixel Pitch :0.255 x0.255mm...

  • Page 4: Automatic Power Saving

    Technical Data(Continued) Hudson2 200P3 Go to cover page Resolution & Preset Modes 2. The 15-pin D-sub connector (male) of the signal cable: 1600 x 1200 at 75Hz(analog input) Maximum 1600 x 1200 at 60Hz(digtal input) Recommended 1600 x 1200 at 60Hz...

  • Page 5: Connection To Pc,Front Control

    Connection to PC,Front Control Hudson2 200P3 Go to cover page Connect to DVD/VCR/VCD Connect to PC Philiips has pre-connected VGA cable for the first installation. Connect power cord, VGA, DVI, microphone and audio cables onto rear of monitor firmly Connect to Microphone and Earphone...

  • Page 6: Removing The Monitor Base

    Front Control , Base Hudson2 200P3 Go to cover page Removing the monitor base Front View Product Description The monitor surface is susceptible to scratching! To switch monitor's power On and Off Power LED To access OSD menu To adjust the OSD Lay the monitor on its face on a soft surface.

  • Page 7: Settings Using The Osd Menu

    Go to cover page Description of the On Screen Display Adjusting the Brightness and Control This is a feature in all Philips LCD monitors which Press the key allows an end-user to adjust screen performance of mark another function or press...

  • Page 8: Advanced Control Of Osd

    Advanced control of OSD, Factory mode Hudson2 200P3 Go to cover page Access Factory Mode To Lock/Unlock OSD function The OSD function can be locked by pressing button for more than 10 seconds, the screen shows following windows for 3 seconds.

  • Page 9: Osd Attention Signals

    OSD Attention signals Hudson2 200P3 Go to cover page The monitor will detect various display situation automatically. When the monitor detects the problems, the screen will show the different warning signals to remind you what is happen to your monitor.

  • Page 10: Osd Menu Tree -Analog

    OSD menu tree -Analog Hudson2 200P3 Go to cover page The OSD Tree Below is an overall view of the structure of the On-Screen Display. You can use this as reference when you want to later on work your way around the different adjustments.

  • Page 11: Osd Menu Tree - Digital

    OSD menu tree - Digital Hudson2 200P3 Go to cover page The OSD Tree Below is an overall view of the structure of the On-Screen Display. You can use this as reference when you want to later on work your way around the different adjustments.

  • Page 12: Osd Lock/Unlock, Aging Mode

    OSD Lock/Unlock, Aging Mode Hudson2 200P3 Go to cover page Front control panel Access Aging.. Mode (OK button for OSD lock/unlock) Step 1: Access Factory Mode Fig. 1 Fig. 1 (OK) AUTO 1 = Buttons for the OSD menu (On-Screen-Display)

  • Page 13: Clock & Phase Adjustments

    CLOCK & PHASE Adjustments Hudson2 200P3 Go to cover page Step 3 : Retain Shut Down Window on the screen , follow The monitor has build-in a auto adjustment hotkey on the front panel, the CLOCK and PHASE adjustment instructions for the...

  • Page 14: Ddc Instructions

    DDC Instructions Hudson2 200P3 Go to cover page General Note: The alignment box has already build-in a batteries socket for using batteries (9V) as power source. Pull out the socket by DDC Data Re-programming remove four screws at the rear of box. Please do not forget that In case the DDC data memory IC or main EEPROM which storage all remove batteries after programming.
  • Page 15 DDC Instructions (Continued) Hudson2 200P3 Go to cover page Configuration and procedure 3. At the submenu, type the letter of your computer's floppy disk drive followed by :EDID301 (for example, A:\EDID301, as shown in Fig. 5). There are 2 chips contained OSD string, serial number..etc on the circuit board, main EEPROM which storage all factory settings,OSD string.
  • Page 16 DDC Instructions (Continued) Hudson2 200P3 Go to cover page Step 3: Modify DDC data (verify EDID version, week, year) Re-programming Analog DDC IC Step 1: After initialize alignment box, connecting all cables and Click (new function) icon from the tool bar, bring up box as shown in Fig.
  • Page 17 DDC Instructions (Continued) Hudson2 200P3 Go to cover page Click Next , bring up Fig. 17. Click Next , bring up Fig. 20. (Serial number can be filled up or be changed at this moment. Fig. 17 Fig. 20 two space...
  • Page 18 DDC Instructions (Continued) Hudson2 200P3 Go to cover page Step 6: Write DDC data Re-programming Digital DDC IC Step 1: Connecting all cables and alignment box as shown in Click (Write EDID) icon from the tool bar to write DDC data.
  • Page 19 DDC Instructions (Continued) Hudson2 200P3 Go to cover page 4. Click icon (Read EDID function) to read DDC EDID data from monitor. The EDID codes will display on screen as shown in Fig. 30. Fig. 35 Fig. 34 Fig. 30 Step 4: Modify DDC data (verify EDID version, week, year) Fig.
  • Page 20 DDC Instructions (Continued) Hudson2 200P3 Go to cover page The display of SERIAL NO. by OSD can be change/update by Analog Mode only. It means "Analog Mode and Digital Mode are using same EEPROM for display of SERIAL NO. by OSD" as shown in Fig. 42.
  • Page 21 DDC Data of Digital Hudson2 200P3 Go to cover page ********************************************************************** Standard Timing Identification #5 EDID log file Horizontal active pixels : 1152 ********************************************************************** Aspect Ratio : 4:3 Vendor/Product Identification Refresh Rate : 70 ID Manufacturer Name : PHL ID Product Code : 080F (HEX.)
  • Page 22 DDC Data of Analog Hudson2 200P3 Go to cover page ********************************************************************** Standard Timing Identification #4 EDID log file Horizontal active pixels : 1152 ********************************************************************** Aspect Ratio : 4:3 Vendor/Product Identification Refresh Rate : 70 ID Manufacturer Name : PHL ID Product Code : 080C (HEX.)
  • Page 23 Serial number application Hudson2 200P3 Go to cover page Fill out serial number of monitor. The display of SERIAL NO. by OSD can be change/update by For example "TY 876543" as shown in Fig. 5. another application software only. Analog Mode and Digital Mode are using same EEPROM(pos. 7463) for display of SERIAL NO.

  • Page 24: Wiring Diagram

    Wiring Diagram Hudson2 200P3 Go to cover page Model : 200P3G/00C...

  • Page 25: Mechanical Instructions

    Mechanical Instructions Hudson2 200P3 Go to cover page Front view as shown Step 4 : in Fig. 1. Turn the set over and release all the plastic clips (12 claws) by plastic scew Rear cover==> and hands as shown in Fig.
  • Page 26 Mechanical Instructions (Continued) Hudson2 200P3 Go to cover page Step 11 : Step 6 : Inverter,power & scaler Remove 10 screws scaler board ===> board are as shown in Fig. 16. as shown in Fig. 11. ===> metal shield Step 12 : ===>...

  • Page 27: Warning And Notes

    Warning and Notes Hudson2 200P3 Go to cover page Warnings Notes . Safety regulations require that the unit should be returned The direct voltages and waveforms are average voltages. in its original condition and that components identical to They have been measured using the Service test software the original components are used.

  • Page 28: Electrical Instruction

    Electrical Instructions Hudson2 200P3 Go to cover page 0. General 2.2 Input signal mode When carry-out the electrical settings in many cases a video signal must be applied to the monitor. A computer with : Factory Preset Modes (19 modes) - ATI VGA 1024 V6-1.04/PH BETA4 interface card...
  • Page 29 Electrical Instructions (Continued) Hudson2 200P3 Go to cover page 3. AC, DC Adaptor PIN ASSIGNMENT OF VARIOUS WAFERS 3.1 Setup the AC I/P at 90VAC, and Output DC loading at 3.33Amp, 5.1.1 PIN ASSIGNMENT OF INVERTER & WAFER 8051 The DC output voltage is 18.0 0.9 V DC, Adjusting is no need.
  • Page 30 Electrical Instructions (Continued) Hudson2 200P3 Go to cover page 5.1.3 PIN ASSIGNMENT OF WAFER TO CONTROL BOARD 6. Microphone test (B) PIN No. SIGNAL (WAFER 1701) The aim of the set-up below is to test whether the microphone is operating correctly.

  • Page 31: Block Diagram

    Block Diagram Hudson2 200P3 Go to cover page Block diagram of Hudson2 - 200P3 Program DVI-D Memory Even TMDS-Rx SiI161B 24C02 Even TMDS-Tx SiI160 TFT LCD Module DVI-A Scaler D-Sub AD9888 PW171B EEPROM 24C32 24C02 Clock:14.318 MHz Back light Sync sw Keypad &LED...
  • Page 32 Schematic PWB(Components side view) Hudson2 200P3 Go to cover page GRID BOARD # REF LABEL SIDE # ____ _____ _________ 1201 C1 1311 A1 2710 B3 3406 A2 5251 C3 1412 A3 1401 A2 2711 B3 3407 B2 5252 C3...
  • Page 33 Schematic PWB(Components side view) Hudson2 200P3 Go to cover page...
  • Page 34 Schematic PWB(Compohnents side view) Hudson2 200P3 Go to cover page...
  • Page 35 Hudson2 200P3 Schematic PWB(Copper track side view) Go to cover page GRID BOARD # REF LABEL SIDE # ____ _____ _________ 1201 C2 2201 C2 2441 A2 3613 C2 1412 A1 2202 C2 2442 A2 3615 C2 1413 A1 2205 C2...
  • Page 36 Schematic PWB(Copper track side view) Hudson2 200P3 Go to cover page...
  • Page 37 Hudson2 200P3 Schematic diagram(DVI/DSUB) Go to cover page 1601-3 1 V/div AC 2 mS/div 1601-2 1 V/div AC 2 mS/div 1601-1 (DVI-I) (Digital DDC IC) 1 V/div AC 2 mS/div 7602-6 4.8V 0.5 V/div AC 5 mS/div 4.8V (Analog DDC IC) 7602-9 2.9V...
  • Page 38 Hudson2 200P3 Schematic diagram(ADC) Go to cover page 1.6V 1.8V 2.1V 2.1V 2.1V 1.6V 1.7V 0.7V 0.6V 0.8V 1.4V 1.7V 1.2V 1.4V 1.3V A/D Convertor 1.2V (Analog) 1.3V 1.3V 1.8V 3.7V 4.2V 1.8V 1.4V 1.4V 1.3V 1.6V 2.9V 3.2V 3.3V...
  • Page 39 Hudson2 200P3 Schematic diagram(TMSD RX) Go to cover page TMDS Transmitter...
  • Page 40 Schematic diagram(VIDEO) Hudson2 200P3 Go to cover page Video Decoder...
  • Page 41 Hudson2 200P3 Schematic diagram(SCALER) Go to cover page Scaler Chip + CPU (Hardware structure only)
  • Page 42 Hudson2 200P3 Schematic diagram(TMDS TX) Go to cover page 7341-76 0.5 V/div AC 10 uS/div 7341-78 1.1V 0.5 V/div AC 10 uS/div TMDS Receiver (DVI-I, Digital) 3.2V 3.2V...
  • Page 43 Schematic diagram(MEMORY/CLKGEN) Hudson2 200P3 Go to cover page Flash ROM (Save code, Firmware for CPU) EEPROM (OSD data, Factory data)
  • Page 44 Schematic diagram(I / O CONTROL) Hudson2 200P3 Go to cover page (to Inverter) (from CPU) (to Audio) D/A converter 3.2V Multiplexer 3.3V 3.3V 3.3V 3.3V 3.3V 3.3V 3.1V 3.1V (switch key control signal, 1.9V data bus) 1.9V...
  • Page 45 Schematic diagram(POWER SUPPLY) Hudson2 200P3 Go to cover page...
  • Page 46 Hudson2 200P3 Power Board C.B.A.(copper track & smc side view) Go to cover page # GRID BOARD # GRID BOARD # REF LABEL # REF LABEL SIDE SIDE # ____ _____ # ____ _____ _________ _________ 1006 A3 7061 A2...
  • Page 47 Hudson2 200P3 Power Board C.B.A.(copper track & smc side view) Go to cover page...
  • Page 48 Hudson2 200P3 Schematic diagram(Power) Go to cover page 2.3V 2.5V 3.3V 6.9V 3.2V 1.6V 15.3V 2.4V 5.1V 13.9V 2.3V 3.3V 15.6V 3.3V 1.4V 12.7V 12.5V...
  • Page 49 Schematic AUDIO & KEYPAD(Copper track side view) Hudson2 200P3 Go to cover page GRID BOARD GRID BOARD GRID BOARD GRID BOARD # REF LABEL SIDE # REF LABEL SIDE # REF LABEL SIDE # REF LABEL SIDE # ____ _____ _________...
  • Page 50 Hudson2 200P3 Schematic diagram(AUDIO AMP/ MIC PREAMP) Go to cover page...
  • Page 51 Schematic diagram(AUDIO PWR / KEYPAD) Hudson2 200P3 Go to cover page...
  • Page 52 Hudson2 200P3 Phone Board C.B.A.(copper track & smc side view) Go to cover page GRID BOARD GRID BOARD # REF LABEL SIDE # REF LABEL SIDE # ____ _____ _________ # ____ _____ _________ 1931 A2 1931 A2 1932 B2...
  • Page 53 Hudson2 200P3 Go to cover page 3269-1 3273-1 7253-126 0.5 V/div AC 0.5 V/div AC 0.5 V/div AC 10 uS/div 10 uS/div 10 uS/div 3269-3 3273-2 7253-127 0.5 V/div AC 0.5 V/div AC 0.5 V/div AC 5 mS/div 5 mS/div...
  • Page 54 Inverter Diagram PWB(AMBIT) Hudson2 200P3 Go to cover page...
  • Page 55 NDR-B R/100K 2.3V C/SM02B-BHSS-1-TB Q29 Q30 Q31 06.0039.01 TR PNP MMBT3906LT1 SOT23(MOTO) 40V 200mA R/4.7M C/22pF/1808 PDR_A PDR-A 06.0016.01 TR PNP PMBS3906 SOT23(PHILIPS) 40V 200mA 1.5V C/221J C/225K/1206 Q/3904 Q16A Q17A 06.6003.06 NFET Si4416DY SO8 (SILICONIX) 30V/9A/0. 4.7V Q/3904 N131 Q14A Q15A 06.2015.01 PFET Si4435DYA SO8 (SILICONIX) 30V/8A/0.
  • Page 56 Inverter Diagram(AMBIT) Hudson2 200P3 Go to cover page C/225K/1206 C/33pF/1808 T/XL-19125-1531 N113 8.9V C/CP N117 C/225K/1206 C/NC C/SM04(9-E2)B-BHS-1 C/225K/1206 R/4.7M Q/3904 N132 D/4148 D/BAV99 N100 C/105Z N126 N127 Q/2N7002 R/1M D/BZM55B75 C/33pF/1808 D/4148 R/5.1M C/105K/0805 C/CP D/RLZ6.2B N116 D/BZM55B75 C/221K/0805 R/4.7M...

  • Page 57: Failure Mode Of Lcd Panel

    Failure Mode of LCD panel Hudson2 200P3 Go to cover page Quick reference for failure mode of LCD panel This page presents problems that could be made by LCD panel. It is not necessary to repair circuit board. Simply follow the Mechanical...

  • Page 58: Exploded View

    Exploded View Hudson2 200P3 Go to cover page...

  • Page 59: Recommended Parts List

    Recommended Parts List Hudson2 200P3 Go to cover page 1102 242208610239 FUSE 5X20 HT 3A15 250V IEC B Model: 200P3G/00C 7061 932217683682 IC L4973V5.1 (ST ) L Item Code number Description 7071 932216562682 IC L4978 (ST ) L 313815752671 FRONT CABINET ASSY...

  • Page 60: Spare Parts List

    Spare Parts List Hudson2 200P3 Go to cover page 2209 223878615649 CER2 0603 X7R 16V 1 N PM10 R 2322 202001293747 ELCAP SM RV2 25V 47U PM20 R Parts indicated on 2210 223878615649 CER2 0603 X7R 16V 1 N PM10 R...
  • Page 61 Spare Parts List(Continued) Hudson2 200P3 Go to cover page 2710 223878615649 CER2 0603 X7R 16V 1 N PM10 R 3265 319802134790 RST SM 0603 47R PM5 COL 2451 223878615649 CER2 0603 X7R 16V 1 N PM10 R 2711 223878615649 CER2 0603 X7R 16V 1 N PM10 R...
  • Page 62 Spare Parts List(Continued) Hudson2 200P3 Go to cover page 3469 319802131010 RST SM 0603 1 R PM5 COL 7342 932218487685 IC SM LM3480IM3-3.3 (NSC0) R 3491 319802131030 RST SM 0603 10K PM5 COL 5201 823827707461 FERRITE BEAD(BLM11B1 SA) 7343 932218493668 IC SM LM2937IMP-3.3 (NSC0) R...
  • Page 63 Spare Parts List(Continued) Hudson2 200P3 Go to cover page 2108 223886115102 CER1 0805 NP0 50V 1N PM5 R 2933 202203100068 ELCAP GL 25V S 470U PM20 B 2109 223858015641 CER2 0805 X7R 50V 22N PM10 R 2934 222258015649 CER2 0805 X7R 50V 1 N PM10 R...

  • Page 64: Difference Parts List

    Difference Parts List Hudson2 200P3 Go to cover page Difference list of 200P3G/00C &200P3M/00C 200P3G/00C 200P3M/00C Model Part(Item) 12NC 8639 000 12395 8639 000 12393 1-FRONT CABINET ASSY 3138 157 52671 31-FRONT CABINET 3138 154 05932 1- BEZEL ASSY 3138 157 53631...

  • Page 65: Repair Flow Chart

    Repair Flow Chart Hudson2 200P3 Go to cover page No Display Check Mains cord & LED of monitor Check Power board 18V/3.3V/5V DC Check video signals input Video source interface Check Check fluorescent Inverter panel lamp 740~920Vrms with load Check inverter...
  • Page 66 Repair Flow Chart Hudson2 200P3 Go to cover page AC IN Power supply board 3.3V/5V DC 18V DC Inverter panel Main panel 740~920Vrms 18V DC Fluorescent LCD panel Lamp No power (power indicator off) Check 18V/3.3V/5V DC Check Check control...
  • Page 67 Repair Flow Chart Hudson2 200P3 Go to cover page Bad brightness Check Bad Inverter Inverter panel output panel 740~920Vrms Check fluorescent lamp Check LCD panel Bad image Check Video,fh/fv signals Check components Check main panel cold soldering Check all connectors &...

  • Page 68: Repair Tips

    Repair Tips Hudson2 200P3 Go to cover page preferably be equipped with a thermal control (soldering 0. Warning temperature: 225 to 250 C). - The chip, once removed, must never be reused. All ICs and many other semi-conductors are susceptible to electrostatic discharges (ESD).

  • Page 69: Ca110 Application

    CA110 Application Hudson2 200P3 Go to cover page LCD COLOUR ANALYZER - CA110 1. SUMMARY The LCD Colour Analyzer CA-110 was designed to upgrade the white-balanceprocess on production lines for colour LCD televisions and computer colour LCD panels in the colour LCD industry. The CA-110 consists of a main unit and a measuring probe.
  • Page 70 CA110 Application (Continued) Hudson2 200P3 Go to cover page...
  • Page 71 CA110 Application (Continued) Hudson2 200P3 Go to cover page ZERO CALIBRATION Zero calibration is performed to determine the output of the measuring probe when no light reaches the sensor and to set this as the zero point to which all other measurements are referenced. Zero calibration must be performed after the POWER switch has been set ON brfore taking any measurements.
  • Page 72 CA110 Application (Continued) Hudson2 200P3 Go to cover page SETTING MEASUREMENT AREA Measurement areas of 25mm and 50mm can be selected by extending or retracting the lens barrel. The 25mm measurement area can be used for measuring LCDs with 2 - inch or greater diagonals: the 50mm measurement area can be used for measuring LCDs with 4 - inch or greater diagonals.
  • Page 73 CA110 Application (Continued) Hudson2 200P3 Go to cover page SETTING MEASUREMENT DISTANCE The measurement distance (the distance from the front of the measuring probe's lens barrel to the display surface of the LCD ) should be set using a ruler according to the procedure below.
  • Page 74 CA110 Application (Continued) Hudson2 200P3 Go to cover page After installation of Chroma 2250, CA110 and LCD monitor. Fig. 3 LCD monitor & Chroma 2250 : Chroma MODEL 2250 Chroma MODEL 2250 - Turn on LCD monitor. - Turn on Chroma 2250 as shown in Fig. 3.
  • Page 75 CA110 Application (Continued) Hudson2 200P3 Go to cover page Step B: Brightness & Contrast setting (pre-setting) Brightness : at 100% Contrast : at 50% -----> Fig. 8 cover (black) cover (black) Probe CA-A30 : Fig. 9 - Remove the cover (black) of CA-A30 as shown in Fig.9.
  • Page 76 CA110 Application (Continued) Hudson2 200P3 Go to cover page 9300K : As shown in Fig. 15 & 16. - select 9300K For CAD/CAM Press OK button, bring up Fig. 15. - select RED or GREEN or BLUE - decrease or increase the value of 9300K R G B.
  • Page 77 CA110 Application (Continued) Hudson2 200P3 Go to cover page After above mentioned adjustment, check the 32 Gray Scale pattern, all the black and white scale should be visible on the screen as shown in Fig. 22. Fig. 22 Full white, Geometry, 32 Gray scale & Pixel on/off pattern check...

  • Page 78: Firmware Upgrade For Cpu

    Firmware upgrade for CPU Hudson2 200P3 Go to cover page Configuration and procedure Access Factory Mode There is an application software to upgrade the firmware of CPU. Bootcode of CPU should be embeded into CPU in production line Fig. 5 before you use those application (.exe) file.
  • Page 79 Firmware upgrade for CPU (Continued) Hudson2 200P3 Go to cover page Connection 1 : for application software Rear view of the monitor Monitor (A) (for view of execution file) Fig. 13 Connect to Mains cord Video cable Fig. 8 Connection 2 : for Firmware upgrade Step 1 : Double click "...
  • Page 80 Firmware upgrade for CPU (Continued) Hudson2 200P3 Go to cover page Step 3: Initiate Firmware of CPU for normal display. Discnnect the Mains cord on monitor, then reconnect the Mains cord to monitor again. 2. PLUG IN-----------> 1. UNPLUG-----------> Fig. 17 Step 4: Check the updated Firmware version.

  • Page 81: General Product Specification

    Hudson2 200P3 GENERAL PRODUCT SPECIFICATION(Continued) Go to cover page HUDSON2-200P 20 GENERAL PRODUCT SPECIFICATION . ANALOG AND DIGITAL DUAL INPUT . AUTO PICTURE ADJUSTMENT . 18 FACTORY PRESET MODES AND 37 PRESET MODES WHICH CAN BE RECOVERED TO PRESET MODES .
  • Page 82 Hudson2 200P3 GENERAL PRODUCT SPECIFICATION(Continued) Go to cover page CONTENTS Foreword Product profile Scanning frequencies Video dot rate Power input Power consumption Dimensions Weight Functions Ambient temperature 2.10 Regulatory compliance Electrical characteristics Interface signals 3.1.1 Video Interface 3.2.1 D-sub cable 3.2.2...
  • Page 83 Hudson2 200P3 GENERAL PRODUCT SPECIFICATION(Continued) Go to cover page Mechanical characteristics Controls Unit dimension / weight Tilt and swivel base Transportation packages 5.4.1 Shipping dimension / weight 5.4.2 Block unit / palletization Environmental characteristics Susceptibility of display to external environment...
  • Page 84 LCD monitor with max. resolution up to 1600*1200 /75 Hz non-interlaced. PRODUCT PROFILE This display monitor unit is a color display monitor enclosed in PHILIPS global styling cabinet which has an integrated tilt and swivel base. Type NR. : LM201U2 (LG.PHILIPS) Outside dimensions : 467.8(w)*361(h)*32(d) (Typ) mm...
  • Page 85 Hudson2 200P3 GENERAL PRODUCT SPECIFICATION(Continued) Go to cover page 2.10 Regulatory compliance : (1) Safety : UL,CSA, B-mark, SISIR, SEMKO, EN60950/IEC950, CB, RFS(NZ) (2) EMI : FCC, VCCI, CE, C-Tick, MPRIII, BCIQ (3) Environmental Issue: TCO99 (4) Ergonomic Requirements: TUV/GS, TUV/ISO9241-3/-8...
  • Page 86 GENERAL PRODUCT SPECIFICATION(Continued) Hudson2 200P3 Go to cover page 3.1.1 Audio Input signal level : 500mVrms Headphone output signal level : 32ohm 0.7+0.7 Vrms Input signal connector : 3.5 mm mini jack Loud speaker : 2+2 W stereo firing 3.1.2...
  • Page 87 Hudson2 200P3 GENERAL PRODUCT SPECIFICATION(Continued) Go to cover page 3.2.2 DVI Cable The input signals are applied to the display through DVI-I cable. Length : 1.8 M +/- 50 mm (fixed) Connector type : DVI-I male with DDC2B pin assignments...
  • Page 88 GENERAL PRODUCT SPECIFICATION(Continued) Hudson2 200P3 Go to cover page 3.2.3 CVBS The input signals are applied to display through CVBS cable pin assignment PIN NO. SIGNAL CVBS CVBS CVBS 3.2.4 S-Video The input signals are applied to display through S-Video cable pin assignment PIN NO.
  • Page 89 Hudson2 200P3 GENERAL PRODUCT SPECIFICATION(Continued) Go to cover page 3.2.5 Software control functions via OSD/control Adjustable functions: LANGUAGE ADJUST POSITION ADJUST SIZE BRIGHTNESS & CONTRAST VIDEO NOISE ADJUST COLOR OSD SETTINGS PRODUCT INFORMATION INPUT SELECTION RESET TO FACTORY SETTINGS EXIT MAIN CONTROLS...
  • Page 90 GENERAL PRODUCT SPECIFICATION(Continued) Hudson2 200P3 Go to cover page INPUT SELECTION : Select Analog D-sub, DVI-D, DVI-A,CVBS,S-VIDEO Size : Small,Medium,Large Position : Horizontal,Vertical Audio source : Audio 1(PC) Audio2 (Video) RESET TO FACTORY SETTING: recall to Factory preset settings. (2) Digital interface OSD :...

  • Page 91: Factory Preset Timings

    Hudson2 200P3 GENERAL PRODUCT SPECIFICATION(Continued) Go to cover page Timing requirement 3.3.1 Mode storing capacity (1) Factory preset modes : 19 (2) Preset modes : 47 3.3.2 Factory preset timings The factory settings of size and centering are according to the reference timing charts ( see fig-4, fig-5 ) MODE NO.
  • Page 92 GENERAL PRODUCT SPECIFICATION(Continued) Hudson2 200P3 Go to cover page MODE NO. RESOLUTION 832 x 624 1024 x 768 1024 x 768 1152 x 870 Dot clock(MHz) 57.28 78.75 49.7kHz 48.363kHz 60.023kHz 68.7kHz A ( us ) 20.11(1152 dots) 20.677(1344 dots) 16.66 (1312dots)
  • Page 93 Hudson2 200P3 GENERAL PRODUCT SPECIFICATION(Continued) Go to cover page MODE NO. RESOLUTION 1600 x 1200 1600 x 1200 688 x 556 Dot clock(MHz) 202.5 75kHz 93.750kHz 31.25kHz A ( us ) 13.333(2160 dots) 10.667(2160 dots) 32 (864 dots) B ( us ) 1.185(192 dots)
  • Page 94 GENERAL PRODUCT SPECIFICATION(Continued) Hudson2 200P3 Go to cover page 3.3.3 Horizontal scanning Sync polarity : Positive or Negative Scanning frequency : 30 - 94 K Hz 3.3.4 Vertical scanning Sync polarity : Positive or Negative Scanning frequency : 56 - 85 Hz...
  • Page 95 Hudson2 200P3 GENERAL PRODUCT SPECIFICATION(Continued) Go to cover page Visual characteristics Test conditions Unless otherwise specified, this specification is defined under the following conditions. (1) Input signal : As defined in 3.3, 1600x 1200 non-interlaced mode (94K/75Hz), signal sources must have 75 ohm output impedance.
  • Page 96 GENERAL PRODUCT SPECIFICATION(Continued) Hudson2 200P3 Go to cover page Brightness : 200 nits (at panel color temperature, 9 points averaged, Fig. 1 ) Image size 4.4.1 Actual display size 408x306mm Brightness uniformity Set contrast at 100% and turn the brightness to get average above 200 nits at center of the screen.
  • Page 97 Hudson2 200P3 GENERAL PRODUCT SPECIFICATION(Continued) Go to cover page White color adjustment There are two factory preset white color 9300K, 6500K. Apply full gray64 pattern, with brightness in 100 % position and the contrast control at 50 % position. The 1931 CIE Chromaticity (color triangle) diagram (x,y)
  • Page 98 GENERAL PRODUCT SPECIFICATION(Continued) Hudson2 200P3 Go to cover page Unit dimension / Weight Set dimension (incl. pedestal) : 488(W) * 460(H) * 220(D) mm Net weight : : 10.5 KG Tilt and swivel base tilt angle : -5 to +25 Transportation packages 5.4.1...
  • Page 99 Hudson2 200P3 GENERAL PRODUCT SPECIFICATION(Continued) Go to cover page Transportation tests Standard Philips UAN-D1400 NSTA Height 70 cm 61 cm 1 corner 1 corner Drop Sequence 3 faces 3 edge Test 6 face electrical function ok Test mechanical function ok...
  • Page 100 GENERAL PRODUCT SPECIFICATION(Continued) Hudson2 200P3 Go to cover page Quality assurance requirements Acceptance test according to MIL-STD-105D Control II level AQL : 0.65 (major) 2.50 (minor) (please also refer to annual quality agreement) Customer acceptance criteria : UAW0377/00 Serviceability The serviceability of this monitor should fulfill the requirements which are prescribed in UAW-0346 and must be checked with the check list UAT-0361.
  • Page 101 Hudson2 200P3 GENERAL PRODUCT SPECIFICATION(Continued) Go to cover page Fig 2: Cross talk pattern Gray level 46 (64 Gray level) Fig 3: Cross talk Pattern Center at Gray level 0 (Black) 20" TFT UXGA LCD CMTR(HUDSON2-200P) TYPE : 2002P3G/00C 8639 000 12395...
  • Page 102 GENERAL PRODUCT SPECIFICATION(Continued) Hudson2 200P3 Go to cover page SEPARATE SYNC. VIDEO HORIZONTAL VIDEO VERTICAL COMPOSITE SYNC. VIDEO HORIZONTAL FIG-4 TIMING CHART -1 20" TFT UXGA LCD CMTR(HUDSON2-200P) TYPE : 2002P3G/00C 8639 000 12395 BRAND : PHILIPS 02-05-20 DAVID CHIANG...
  • Page 103 Hudson2 200P3 GENERAL PRODUCT SPECIFICATION(Continued) Go to cover page VIDEO VERTICAL COMPOSITE SYNC. & VIDEO ( SYNC. ON GREEN ) HORIZONTAL VERTICAL FIG-5 TIMING CHART -2 20" TFT UXGA LCD CMTR(HUDSON2-200P) TYPE : 2002P3G/00C 8639 000 12395 BRAND : PHILIPS...

  • Page 104: Safety Test Requirements

    Safety Test Requirements Hudson2 200P3 Go to cover page 3. Equipments and Connection All units that are returned for service or repair must pass the original manufactures safety tests. Safety testing requires both Hipot Ground Continuity testing. 3.1. Equipments For example :...

  • Page 105: General Troubleshooting Guide

    Go to cover page General Troubleshooting Guide No display, but LED is ON Unstable picture/ or LED is amber ( yellow) Picture flickers Monitor drivers Out of H/ V Sync. ( inf file ) Picture too bright Screen size not correct Picture too dim Picture too large or small No power/...

  • Page 106: Or Led Is Amber(Yellow)

    General Troubleshooting Guide (Continued) Go to cover page NO DISPLAY, but LED is ON or LED is amber(yellow) Checkpoint: 1. Click your mouse or type some word with your keyboard to wake up computer from saving status. 2. Check that your video cable is plugged in and does not have bent pins. Amber? or Green? Continued...
  • Page 107 General Troubleshooting Guide (Continued) Go to cover page Continued Green Amber Amber? or Green? Make sure the correct signal is input. Make sure of the state of the computer (Turn on). Press the Is the ATTENTION For example: keyboard or operate the mouse. picture displayed? CHECK SIGNAL CABLE Is picture displayed...

  • Page 108: Monitor Drivers (Inf File)

    Philips' monitors build in VESA DDC2B feature to support Plug & Play requirement for Windows 95/98/2000/Me . You can install the information file ( .inf) in order to select your Philips monitor from "Monitor" dialog box in Windows 95/98/2000/Me to activate Plug & Play application. The installation procedure based on...

  • Page 109: Screen Size Not Correct

    General Troubleshooting Guide (Continued) Go to cover page Screen Size Not Correct Adjust Horizontal/ Vertical/ Shape Via the monitor " On Screen Display " or " Front Control Knob : Auto function key". Is the Screen Size displayed correct? * Reset the monitor via OSD manipulation. (Select "...

  • Page 110: Picture Too Large Or Small

    General Troubleshooting Guide (Continued) Go to cover page Picture too Large or Small Reset monitor via OSD menu manipulation. Change monitor timing to work at the recommended resolution. Please contact your dealer/reseller for more information. Forward Back...

  • Page 111: Usb

    PC OEMs. USB 2.0 : Drafted by Compaq, Hewlett Packard, Intel, Lucent, Microsoft, NEC and Philips, USB Specification version 2.0 will increase device data throughout up to 480Mbps, 40 times faster than USB 1.1 devices.

  • Page 112: Unstable Picture/Picture Flickers

    General Troubleshooting Guide (Continued) Go to cover page Unstable Picture/ Picture Flickers Vertical/ Horizontal flicker appears Push the AUTO button. Eliminate the vertical/ horizontal bars using the Phase Adjustment in the FIRST Window. Please contact your dealer/reseller for more information. Forward Back...

  • Page 113: Out Of H/V Sync

    General Troubleshooting Guide (Continued) Go to cover page Out of H/V Sync. 1. Turn off monitor. 2. Disconnect signal cable. 3. Turn on monitor. in the self test ? (warning signal..) Check video cable for bent pins, reseat to system video and It is need to check and power system.

  • Page 114: Picture Too Bright

    General Troubleshooting Guide (Continued) Go to cover page Picture too bright Adjust Brightness and/or contrast via the Monitor "On-Screen Display" or "Front Control Knob". Is picture displayed normally? * Reset the monitor via OSD manipulation. (Select " R eset to Factory settings".) *(or =>...

  • Page 115: Picture Too Dim

    General Troubleshooting Guide (Continued) Go to cover page Note : 1. Sun light passing through a window is much brighter than monitor luminance (Luminance is the measurable quantity which most Picture too dim closely corresponds to brightness), therefore the two worst places for a monitor is directly facing the window or directly behind the window.

  • Page 116: No Power/Led Is Off

    General Troubleshooting Guide (Continued) Go to cover page NO POWER / LED is off Is cabinet of monitor damaged being dropped? 1. Is the correct AC power cord connected? The monitor may have 2. Is AC power outlet active? become faulty due to 3.
  • Page 117 General Troubleshooting Guide (Continued) Go to cover page Missing Color There are 2 easy ways to determine the Missing color problem. 1. View an image that is supposed to be "White". If one of the colors (RGB) is not functioning. White can not be produced.
  • Page 118 General Troubleshooting Guide (Continued) Go to cover page OSD MAIN MENU LOCKED Press and hold the OSD menu key for about 10 seconds , until picture displays "OSD MAIN MENU UNLOCKED" Please contact your dealer/reseller for more information. Forward Back...
  • Page 119 General Troubleshooting Guide (Continued) Go to cover page Jitter/Video Noise Turn on monitor with a display or image for 30 minutes (due to drift). Jitter or Noise still present ? Try moving the monitor to another location to see if problem goes away. Jitter or Noise disappear.
  • Page 120 General Troubleshooting Guide (Continued) Go to cover page Power management function is not active Verify the PC is compliant with VESA. In case all of the video signals of PC are not off, power management function is not active normally. [Repeat to power on and off (power management).] There are accelerator boards not complied with VESA.
  • Page 121 256 colors version of video chip driver 4. Right driver of video card/chip 5.1. Driver in CDROM manual / Philips web 5. Right driver of 5.1. Install right monitor driver 5.2. Philips Web: www.philips.com monitor (inf file) 5.3.
  • Page 122 4.2. It also could be due to improper still not changeable version of the monitor drive(inf file) 5.1. Driver in CDROM manual/Philips 5.1 Install right monitor driver 5. Right driver of (inf file) monitor 5.2.
  • Page 123 General Troubleshooting Guide (Continued) Go to cover page Resolution can not be changed and LightFrame not work on Mac PC Resolution can not be changed and LightFrame not work on Power Mac 1.1. Consulted by system/video 1. Test monitor with chipmakers for the right different IBM pc version of video chip drive...

This manual is also suitable for:

200p3g/00c

Table of Contents