Page 1
Quick Start Guide What’s in the Box? You should find these items upon opening the box. Stand Power adaptor FM wire antenna MW antenna Quick start guide User manual MCM239 Step A Install Step Prepare Step Enjoy CR2025 Remote control with 1 x CR2025 battery...
Install Mounting the stand onto the set Locate the bottom of the main unit and find the slot, then slide the stand in the slot until it stops, as indicated in the figure. Rear connections Connect the cable of the left speaker to LEFT (red and black) and the cable of the right speaker to RIGHT (red and black).
Setup Setup Setting the clock Press and hold STANDBY-ON/ ECO POWER y to switch the set to Standby mode. ➜ The display shows the set time. ➜ -- --:-- -- flashes by default if you have not set the clock. In the standby mode, press and hold DISPLAY/CLOCK on the remote control.
Detailed playback features and additional functions are described in the accompanied owner's manual. memory cards (requires an additional card reader to on the front panel of the main set. 2007 C Koninklijie Philips Electronics N.V. All rights reserved. http://www.philips.com PDCC-JH-0734...
Need help?
Do you have a question about the MCM239/12 and is the answer not in the manual?
Questions and answers