Page 2
Introduction Honeywell’s Multi-Bay Battery Charger can fully charge up to four lithium-ion batteries in less than eight hours. An RP2 bat- tery typically takes 4 hours to fully charge, and an RP4 battery takes 7 hours. Multi-Bay Battery Charger Operation and Indicators Connect the right angle power adapter to the Multi-Bay Battery Charger.
Page 3
Place a battery into a cradle to charge with the battery contacts facing the contacts on the charger. When a battery is inserted, the solid red LED appears. If the red LED does not appear or is flashing, check to make sure the battery pack is seated completely in the charger with the battery contacts facing the contacts on the charger.
Page 4
Replace it after the battery is unable to hold an adequate charge. • If you are not sure if the battery or charger is working properly, send it to Honeywell International Inc. or an authorized service center for inspection. Refer to Technical Assistance...
Page 5
Proper Disposal of the Battery When the battery has reached the end of its useful life, the battery should be disposed of by a qualified recy- cler or hazardous materials handler. Do not incinerate the battery or dispose of the battery with general waste materials.
Page 6
Honeywell International Inc. provides service for all of its prod- ucts through service centers throughout the world. To obtain warranty or non-warranty service, you must first obtain a Return Material Authorization number (RMA #) and then return your product to Honeywell (postage paid) with a copy of the dated...
Page 7
purchase record. To learn more, go to www.honeywellaidc.com and select Service & Repair at the bottom of the page. Limited Warranty For warranty information, go to www.honeywellaidc.com click Get Resources > Product Warranty.
Need help?
Do you have a question about the RP2B and is the answer not in the manual?
Questions and answers