• Please use approved power cord provided by Philips at all times. If The Philips guarantee applies provided your power cord is missing, please the product is handled properly for contact your local service center.
Page 4
1. Important brightness, avoid the fluorescent • Temperature: 0-40°C 32-104°F lighting, and surfaces that don’t • Humidity: 20-80% RH reflect too much light. • IMPORTANT: Always activate a mov- • Seeing a doctor if your symp- ing screen saver program when you toms.
1. Important Note 1.2 Notational Descriptions Consult a service technician if the The following subsections describe monitor does not operate normally, or notational conventions used in this you are not sure what procedure to take document. when the operating instructions given in this manual have been followed.
Equipment-WEEE From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily entails participation in national take- This marking on the product or on back initiatives and recycling programs...
使用 前请阅读使用说明 User’s Manual Monitor drivers 保留备用 Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. * CD 3. Hold the monitor base stand with both hands and firmly insert the base stand into the base column.
Page 8
2. Setting up the monitor Connecting to your PC 253V7LJA 253V7LS AC power input VGA input AC power input DVI-D input VGA input Kensington anti-theft lock DP input HDMI input Earphone output 253V7LDS Audio input Kensington anti-theft lock Connect to PC 1.
2. Setting up the monitor 253V7LJA 2.2 Operating the monitor Front view product description 253V7LS,253V7LDS Switch monitor’s power ON and OFF. Access the OSD menu. Confirm the OSD Switch monitor’s power ON adjustment. and OFF. Adjust the OSD menu. Access the OSD menu. Confirm the OSD Adjust the speaker volume.
Page 10
On-Screen Display. You can use On-Screen Display (OSD) is a feature in this as a reference when you want to all Philips LCD monitors. It allows an end work your way around the different user to adjust screen performance or adjustments later on.
2. Setting up the monitor Resolution notification 2.3 Remove the Base Assembly This monitor is designed for optimal for VESA Mounting performance at its native resolution, Remove the Base Stand 1920 × 1080 @ 60 Hz. When the monitor is powered on at a different resolution, Before you start disassembling the an alert is displayed on screen: Use monitor base, please follow the...
Page 12
2. Setting up the monitor Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. VESA Mounting Screw M4. Always contact manufacturer for wall-mount installation. 100mm 100mm...
There are multiple selections: Standard, in real time. Whether you're working Internet, Game, EasyRead and LowBlue with text applications, displaying images Mode. or watching a video, Philips SmartImage delivers great optimized monitor performance. Why do I need it? ...
Developed for wellbeing, content. SmartContrast dynamically Philips LowBlue Mode setting uses a controls contrast and adjusts smart software technology to reduce backlighting for clear, crisp, bright harmful shortwave blue light.
5. Technical Specifications 5. Technical Specifications Picture/Display Monitor Panel Type Backlight W-LED system Panel Size 24.5" W (62.2 cm) Aspect Ratio 16:9 Pixel Pitch 0.280 x 0.280 mm SmartContrast 10,000,000:1 Response Time (typ.) 5ms (typ, on/off) Smart Response (typ.) 1ms (GtG) Optimum Resolution 1920 x 1080 @ 60Hz Viewing Angle (typ.)
Page 17
5. Technical Specifications Power AC Input Voltage AC Input Voltage AC Input Voltage Consumption at 100VAC, 50Hz at 115VAC, 50Hz at 230VAC, 50Hz Normal Operation 22.22 W (typ.) 22.32 W (typ.) 22.42 W (typ.) Sleep(Standby) <0.5 W <0.5 W <0.5 W <0.3 W <0.3 W <0.3 W...
Page 18
Finish Texture Note 1. EPEAT Gold or Silver is valid only where Philips registers the product. Please visit www.epeat.net for registration status in your country. 2. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
6. Power Management 6. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
Pixel Defect Policy single black pixel. Other combinations of lit and dark sub pixels appear as Philips strives to deliver the highest single pixels of other colors. quality products. We use some of the industry's most advanced manufacturing...
Page 22
'off'. That is, the warranty period, a TFT Monitor a dark dot is a sub-pixel that stands out panel in a Philips flat panel monitor on the screen when the monitor displays a must have pixel or sub pixel defects light pattern.
Page 23
7. Customer care and warranty Note 1. 1 or 2 adjacent sub pixel defects = 1 dot defect 2. This monitor is ISO9241- 307 compliant.(ISO9241-307: Ergonomic requirement , analysis and compliance test methods for electronic visual displays) 3. ISO9241-307 is the successor of formerly known ISO13406 standard, which is withdrawn by the International Organisation for...
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below.
• Disconnect the monitor from mains • First, ensure that the power button power source immediately for safety on the front of the monitor is in the • Contact with Philips customer OFF position, then press it to the service representative immediately. ON position.
For further assistance, refer to the An "after-image", "burn-in" or "ghost Consumer Information Centers list image" remains after the power has and contact Philips customer service been turned off. representative. • Uninterrupted display of still or static images over an extended period may cause "burn in", also known as...
Page 27
• Shut down your computer, subjected to excessive shocks disconnect your old monitor and and is protected from sharp or reconnect your Philips LCD monitor. blunt objects. When handling the • Turn on your monitor and then turn monitor, make sure that there is on your PC.
Page 28
PC, workstation or Mac? repaired. The damage mentioned above Ans.: Yes. All Philips LCD monitors are is not covered under your warranty. fully compatible with standard Q12: Why is my Display not showing PCs, Macs and workstations.
Need help?
Do you have a question about the 253V7 and is the answer not in the manual?
Questions and answers