Contents 13.1 Setup Smart TV 1 Get Support 13.2 Smart TV Start Page 1.1 Identify and Register Your TV 13.3 App Gallery 1.2 TV Help and User Manual 14 Netflix 1.3 On-line Help and User Manual 1.4 Consumer Care / Repair 15 Amazon Prime Video 2 Software 16 YouTube...
Identify and Register Your TV Manual Identify your TV - TV model number and serial To solve any Philips TV related problem, you can number consult our online support. You can select your language and enter your product model number.
Page 4
cause severe injury, irreparable damage to your TV or void your warranty.
The TV switches itself off for 10 seconds and then back on again. Please wait. Software Do not . . . • use the remote control • remove the USB memory device from the TV Update Software • press twice •...
Middle Quick Guide Remote Control Batteries and Cleaning Replace batteries If the TV does not react on a key press on the remote control, the batteries might be empty. To replace the batteries, open the battery compartment on the back of the remote control. 1 - Slide the battery door in the direction shown by 1 - OK key the arrow.
To open the Netflix App directly. With the TV switched on or from standby. Joystick - Local Control • If you have a Netflix subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Keys on TV Internet.
You can find the instructions for mounting the TV stand in the Quick Start Guide that comes with the TV. You can also download it from www.philips.com/TVsupport. Caution Use the model number of the TV to look for Wall mounting the TV requires special skills and the Quick Start Guide to download.
In standby mode, the TV is still connected to the mains power but consumes very little energy. Turn on TV To switch off the TV completely, disconnect the power plug. Connect Power Cable When disconnecting the power plug, always pull the power plug, never the cord.
Video Device Connections HDMI Connectivity guide An HDMI connection has the best picture and sound quality. Always connect a device to the TV with the highest For best signal quality transfer, use a high-speed quality connection available. Also, use good quality HDMI cable.
For 43PFx68x5 For 43PFx68x5 Digital Audio Out - Optical Audio Out - Optical is a high quality sound connection. This optical connection can carry 5.1 audio channels. If your device, typically a Home Theater System (HTS), has no HDMI ARC connection, you can use this connection with the Audio In - Optical connection on the HTS.
3 - Select the TV name on your mobile device, and, Headphones after connection, you can enjoy using Screen mirroring. You can connect a set of headphones to the connection on the side of the TV. The connection is a mini-jack 3.5mm. You can adjust the volume of the headphones separately.
Download the Philips TV Remote App from your favorite app store today. USB Hard Drive The Philips TV Remote App is available for iOS and Android and is free of charge. Installation If you connect a USB Hard Drive, you can pause or record a TV broadcast.
Page 14
formatting. TV, you cannot use the stored recordings on another TV or PC. Do not copy or change recording files on Follow the instructions on screen. the USB Hard Drive with any PC application. This will When the USB Hard Drive is formatted, leave it corrupt your recordings.
Switch Source Source List • To open the sources menu, press SOURCES . • To switch to a connected device, select the device with the arrows (Right) or (Left) and press OK. • To view the technical information of the connected device you are watching, press ...
2 - Select Update channels to only add new digital channels. Channels 3 - Select Start and press OK to update channels. This can take a few minutes. Quick reinstall About Channels and Switch (Home) > Settings > Install Channels >...
1 - Select Antenna or Cable, and press OK. Caption Service 2 - Select Start and press OK. This can take a few minutes. Select the correct type of closed caption services. For more information, in Help, press Keywords and look up Closed Caption. Channel Logos ...
Rename Channel Search Channels 1 - Press , to switch to TV. > OK > OPTIONS > Search channel 2 - Press OK to open the current channel list. You can search for a channel to find it in a long list of 3 - Select one channel you want to rename.
in the TV listings. Create a favorites List Switch on closed caption 1 - While you watch TV, press OPTIONS. 1 - While watching a TV channel, press OK to open 2 - Select Closed Caption > On and press OK. the channel list.
Change Day TV guide If the TV guide information comes from the broadcaster, you can press to view the schedule for any of the next few days. Press to go back to the previous day. What You Need Alternatively, you can press ...
Page 21
Set a Recording You can set a recording in the TV Guide. To see the recording list, press Recordings , a program set to be recorded is marked with a (red dot) before the program's name. To record a program… 1 - Press ...
To record a program… Recording and 1 - Press TV GUIDE. 2 - On the TV guide, select the channel and program you wish to record. Press (Right) or (Left) to Pause TV scroll through the programs of a channel. 3 - With the program highlighted, press the color ...
The recording will appear in the list of scheduled Replay recordings and reminders. Since the TV stores the broadcast you are watching, you can replay the broadcast for a few seconds. Watch a Recording To replay a current broadcast… To watch a recording… 1 - Press ...
10.3 Photos Videos, Photos and Music View Photos 1 - Press SOURCES, select USB and 10.1 press OK. 2 - Select USB Flash Drive and press (right) From a USB Connection to select the USB device you need. 3 - Select Photo, you can press ...
date, month, year or alphabetically by name. • To go back to the folder, press . 4 - Select one of 360 photos, and press OK to view Open video folder 1 - Press SOURCES, select USB and •...
Page 26
Music Options During music playback, press OPTIONS to… Shuffle off, Shuffle on Play songs in sequential order or at random. Repeat, Play once Play songs on a loop or just once.
on the connected audio system. Open TV Setting • Sleep timer - Set the TV to switch to standby automatically after a preset time. Menus • Screen off - If you only listen to music on TV, you can switch off the TV screen. 11.1 •...
Page 28
press Restore style. Adjust the color enhancement (Home) > Settings > All settings > Picture > Expert mode settings > Color Color, Contrast, Sharpness, Brightness enhancement Select Maximum, Medium, or Minimum to set the Adjust the picture color level of the color intensity and the details in bright ...
Page 29
HDR Plus Picture Clean (Home) > Settings > All Noise reduction settings > Picture > Expert mode settings > HDR (Home) > Settings > All Plus settings > Picture > Expert mode settings > Noise reduction Set HDR Plus to Off, Minimum, Medium, Select Maximum, Medium, Minimum to set the Maximum or Automatic to set the level at which the level for removing the noise in video content.
Page 30
Select On to improve the sound for speech. Ideal for Quick Picture Settings news programs. (Home) > Settings > All settings > Picture > Quick picture settings Equalizer • During the first installation, you did some picture (Home) > Settings > All settings in a few easy steps.
Page 31
You can select where you want to hear the TV sound • Select Less to have softer volume. and how you want to control it. • If you select TV Speakers off, you permanently switch off the TV speakers. Digital out delay •...
Page 32
remote control. HDMI-CEC Connection - EasyLink Connect HDMI CEC-compatible devices to your TV, Set TV switch off timer you can operate them with the TV remote control. EasyLink HDMI CEC must be switched on on (Home) > Settings > All settings > General the TV and the connected device.
Page 33
Demo Me autostart Redo full TV installation , and set TV status back to (Home) > Settings > All settings > General settings > Shop setup > Demo Me autostart the first time you switch on Turn On/Off the Demo Me autostart. ...
Page 34
This lock is only valid for 18+ rated apps from the • Select Mixed volume, you can mix the volume of Philips apps. the normal audio with the audio commentary. Press the arrows (up) or (down) to adjust the value.
Home Network network router with a connection to the Internet. Use a high-speed (broadband) connection To enjoy the full capabilities of your Philips Smart TV, to the Internet. your TV must be connected to the Internet. For 32PHx68x5 / 40PFx68x5 Connect the TV to a home network with a high-speed Internet connection.
2 - You can set the number for the IP Memory Address, Netmask, Gateway, DNS 1, or DNS 2. With Clear Internet Memory you clear your Philips server registration and parental rating settings, your video store app logins, all Philips App Gallery Switch On with Wi-Fi (WoWLAN) favorites, Internet bookmarks and history.
- Internet pages are shown one page at a time and full screen. Recommended Apps In this window, Philips presents a range of recommended Apps for your country, Apps for Online TV or a selection of rental movies from Video stores.
Netflix If you have a Netflix membership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby.
Amazon Prime Video With Amazon Prime membership, you gain access to thousands of popular movies and TV show, including exclusive Prime Originals. Press the app icon to open the Amazon Prime Video app. Your TV must be connected to the Internet to use the app.
YouTube YouTube provides a platform to connect to the world. Watch and discover popular videos uploaded by YouTube users around the world. Use the YouTube app to explore the latest topics on music, news, and more. Press the app icon to open the YouTube app. Your TV must be connected to the Internet to use the app.
1 year. You can also find the power consumption values for this product on the Philips website for your country at www.philips.com/TVsupport. 17.2 End of Use...
• 720p • 1080i Product specifications are subject to change without • 1080p notice. For more specification details of this product, www.philips.com/TVsupport Power Composite • Mains power: AC 110-240V +/-10% • Ambient temperature: 5°C to 35°C • PAL, NTSC, SECAM 18.2...
Philips startup screen > User manual to find the information you are looking When the TV is in standby, a Philips startup screen is for. Select a keyword to go the most relevant page in displayed, then the TV returns to standby mode. This the User manual.
Press (Home) > Settings > Help > Check the TV. picture size / Picture position is incorrect If the video clip stays black, call Philips. Wait until the • If the picture size—its aspect ratio—does not fit the clip ends and select Contact info in the Help menu.
19.6 19.8 Sound Photos, videos and music from a USB device do not No sound or poor sound quality • Check if the sound settings of the TV are OK, press show the volume or mute key. • Check if the USB storage device is set to Mass •...
Contact Philips TV Consumer Care to have the TV • NEVER place a television in an unstable location. checked before use. • NEVER place the television on tall furniture (for •...
result in an explosion. 20.2 • Leaving a battery in an extremely high temperature Screen Care surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. • A battery subjected to extremely low air pressure Clean that may result in an explosion or the leakage of flammable liquid or gas.
TP Vision, which is the manufacturer of the for early integration in its products. product. TP Vision is the warranter in relation to the TV with which this booklet was packaged. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
22.4 Wi-Fi Alliance Copyrights Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are 22.1 registered trademarks of the Wi-Fi Alliance. HDMI The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
It offers functional improvements over sh for both programming and interactive use. Open Source In addition, most sh scripts can be run by Bash without modification. Source: http://www.gnu.org/software/bash/ 23.1 Open Source Software c-ares (1.10.0) c-ares is a C library that performs DNS requests and This television contains open source software.
Page 52
searching utilities of the GNU operating system. iptables (1.4.15) These programs are typically used in conjunction with For Cross connection. other programs to provide modular and powerful Source: http://www.netfilter.org/projects/iptables/ directory search and file locating capabilities to other commands. iputils (s20101006) Source: http://www.gnu.org/software/findutils/ The iputils package is set of small useful utilities for Linux networking.
Page 53
terms and conditions of the libusb license, which can mtd-utils be found below. The aim of the system is to make it simple to provide Source: a driver for new hardware, by providing a generic http://libusb.wiki.sourceforge.net interface between the hardware drivers and the upper http://www.libusb.org/ layers of the system.
Page 54
procps is the package that has a bunch of small This piece of software is made available under the useful utilities that give information about processes terms and conditions of the u-Boot loader license, using the /proc filesystem. which can be found below. The package includes the programs ps, top, vmstat, w, Source: http://www.denx.de kill, free, slabtop, and skill.
Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. TP Vision does not bear any responsibility in these sorts of situations.
Digital Audio Out - Optical 11 Pause TV 23 Digital Media Renderer - DMR 36 Philips Support 3 Digital Out Delay 31 Philips TV Remote App 13 Digital Out Format 31 Photos, Videos and Music 24 Digital Out Leveling 31 Picture Clean, Noise Reduction 29...
Page 57
Remote Control and Batteries 6 Remote Control Key 6 Rename or replace the device icon 15 Repair 3 Reset Settings 33 Safety and Care 47 Screen Mirroring 12 Screen Mirroring Connection 12 Screen Off 32 Sharpness 28 Shop Setup 32 Sleep Timer 33 Smart TV 37 Software Version 5...
Need help?
Do you have a question about the 6825 Series and is the answer not in the manual?
Questions and answers