Sumário 13.3 App Gallery 1 Get Support 13.4 Video on Demand 1.1 Identify and Register your TV 14 Netflix 1.2 TV Help and User Manual 1.3 Consumer Care / Repair 15 Amazon Prime Video 2 Software 16 YouTube 2.1 Update Software 2.2 Software Version 17 Environmental 3 Quick Guide...
TV. documentation that came with the TV. Register your TV Or consult our website www.philips.com/TVsupport and select Register your TV and enjoy a range of benefits your country if needed. including full support (including downloads), privileged access to information about new products,...
back on again. Please wait. Software Do not . . . • use the remote control • remove the USB memory device from the TV • press twice Update Software • press the power switch on the TV The TV switches itself off (for 10 seconds) and then back on again.
Quick Guide Remote Control Batteries and Cleaning Replace batteries Standby / On If the TV does not react on a key press on the remote To switch the TV on or back to Standby. control, the batteries might be empty. 2 - ...
7 - OPTIONS The menu will disappear automatically. To open or close the Options menu. IR sensor The TV can receive commands from a remote control that uses IR (infrared) to send commands. If you use such a remote control, always make sure you point the remote control at the infrared sensor on the front of the TV.
You can also press the small joystick key on In case you lost this guide, you can download it the back of the TV. from www.philips.com/TVsupport. In standby mode, the TV is still connected to the Use the model number of the TV to look for mains power but consumes very little energy.
Connections Connectivity guide Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. When you connect a device, the TV recognizes its type and gives each device a correct type name. You can change the type name if you wish.
HDMI ARC Headphones Only HDMI 1 on the TV have HDMI ARC (Audio You can connect a set of headphones to Return Channel). the connection on the side of the TV. The connection is a mini-jack 3.5mm. You can adjust the If the device, typically a Home Theatre System (HTS), volume of the headphones separately.
Download the Philips TV Remote App from your and select a connected device. favourite app store today. The Philips TV Remote App is available for iOS and Block a Device Android and is free of charge. * When use your phone as a remote control, TV The first time you receive a request to connect from a cannot be switched on or off via your phone.
Page 11
their premium programmes. These programmes have Set Passwords and PIN Codes a high level of copy protection. For some CAMs, you must enter a PIN code to watch Contact a digital TV operator for more information on its channels. When you set the PIN code for the CAM, terms &...
Page 12
To pause a broadcast, you need a USB compatible connection first before you install the USB Hard Drive. Hard Drive with a minimum of 4GB disk space. Warning To Record The USB Hard Drive is formatted exclusively for this To pause and record a broadcast, you need a TV, you cannot use the stored recordings on another minimum of 250GB disk space.
Switch Source Source List • To open the sources menu, press SOURCES . • To switch to a connected device, select the device with the arrows (Right) or (Left) and press OK. • To view the technical information of the connected device you are watching, press ...
for channels Channels 1 - Select Start now and press OK. 2 - Select Update channels to only add new digital channels. 3 - Select Start and press OK to update channels. About Channels and Switch This can take a few minutes. Channels Quick reinstall ...
Page 15
frequency value to search for channels, the All channels list but also in the New channels list. select Advanced. Empty channels are removed. If new channels are found or if channels are updated Frequency step size or removed, a message is shown at TV start up. The The TV searches for channels in steps of 8MHz.
Page 16
• Fine tune automatically. To fine tune a channel, select Fine tune and • Up to 4 Satellites - You can install up to 4 satellites press OK. You can fine tune the channel (4 LNBs) on this TV. Select the exact number of with ...
Page 17
(Home) > Settings > Install Manual Installation Channels > Satellite installlation > Search for satellite > Remove satellite (Home) > Settings > Install Channels > Satellite installlation > Manual You can remove one or more satellites from your installtion current satellite installation.
Page 18
With Channel list copy, you can copy the channels setting, see chapter Re-install channels. Start this installed on one TV onto another Philips TV of the procedure until you reach the country setting. same range. With Channel list copy, you avoid the Press ...
language (the language set on TV), the TV can show Channel info subtitles automatically in one of your preferred subtitle languages. One of these subtitle languages Select Channel info to view the technical information must also be part of the broadcast. of the channel.
Page 20
Channel List Options Select Channel Range > OK > OPTIONS > Select channel range Open Option Menu Select a range of channels in a favourites channel To open the channel list option menu... list, once completed, press OK. •...
With the TV Guide you can view a list of the current and scheduled TV programmes of your favourite Favourite Channels channels. Along with your favourite channels, the first 3 most used channels from the broadcasters’ default About Favourite Channels list will be appended after your favourite channels for your preview.
Page 22
Some broadcasters offer T.O.P. Text. To open T.O.P. Text pages within Text, press OPTIONS and select T.O.P. overview. * The teletext can only be reached when the channels are installed directly on the TV’s internal tuner and the set is on TV mode. If a set-top box is being used, the teletext will be unavailable via TV.
Change Day TV Guide If the TV guide information comes from the broadcaster, you can press + to view the schedule of one of the next days. Press - to go back to the previous day. What You Need Alternatively, you can press ...
Page 24
Set a Recording You can set a recording in the TV Guide. To record a programme… 1 - Press TV GUIDE and select a future or ongoing programme. 2 - Press the colour key Record . To cancel a recording… 1 - Press ...
To record a programme… Recording and 1 - Press TV GUIDE. 2 - On the TV guide, select the channel and programme you wish to record. Press (Right) Pause TV or (Left) to scroll through the programmes of a channel.
8 - Select Schedule and press OK to schedule the Replay manual recording. The recording will appear in the list of scheduled Since the TV stores the broadcast you are watching, recordings and reminders. you can mostly replay the broadcast for a few seconds.
Photo Options Videos, Photos and With a photo on screen, press OPTIONS to… Music List/Thumbnails View photos with list view or thumbnails view. Shuffle off, Shuffle on 10.1 View the pictures in sequential order, or at random. From a USB Connection Repeat, Play once View the pictures repeatedly or once only.
360 Photo Options Video Options With a 360 photo on screen, press OPTIONS to… During the video playback, press OPTIONS to… List/Thumbnails List/Thumbnails View 360 photos with list view or thumbnails view. View video files with list view or thumbnails view. Shuffle off, Shuffle on Subtitles View the pictures in sequential order, or at random.
• Natural - Natural picture settings • Standard - Most energy conscious setting Open TV Setting • Movie - Ideal for watching movies • Game - Ideal for gaming* Menus • Monitor - Ideal for computer monitor * Picture style - Game is not available for some video sources.
Page 30
reference value (50) may result lower contrast. energy saving to set the TV automatically reduces the contrast, for best power consumption or for best picture experience, or select Off to switch off the adjustment. Expert mode picture settings Colour Settings Dynamic Contrast ...
Page 31
• To do these steps, make sure the TV can tune to a MPEG Artefact Reduction TV channel or can show a programme from a (Home) > Settings > All connected device. settings > Picture > Expert mode settings > MPEG Artefact Reduction Select Maximum, Medium, Minimum to have Sound Settings different degress of smoothing the artefects in digital...
Page 32
will be played through TV speakers and adjust the audio sync delay to synchronise the audio headphones. to the video. Select Off if a sound delay is set on your Home Theatre System. To adjust the volume of TV speakers or headphones, press Volume and press the arrows ...
Page 33
(Home) > Settings > All settings > General CAM Operator Profile settings > EasyLink > EasyLink > On (Home) > Settings > All Settings > Channels > CAM Operator Profile Operate HDMI CEC-compatible devices with TV To switch on operator profile for CI+/CAM for easy remote control channel installation and updates.
Page 34
receiver to watch TV (a Set-Top Box - STB) and you Copy demo file do not use the remote control of the TV, you should (Home) > Apps > Demo me > Manage demos > deactivate this automatic switch off, to set the value Copy to USB to 0.
Page 35
PIN code when you try to start an 18+ rated app. This lock is only valid for 18+ rated apps Universal access for blind or partially sighted from the Philips apps. people (Home) > Settings > All settings > Universal Set code access >...
Page 36
Digital channels can offer several subtitle languages Set the TV to switch to Standby automatically after a for a programme. You can set a preferred primary and preset time secondary subtitle language. If subtitles in one of (Home) > Settings > All settings > Region and these languages are available, the TV will show the language >...
12.1 to the Internet. Home Network To enjoy the full capabilities of your Philips Smart TV, your TV must be connected to the Internet. Connect the TV to a home network with a high-speed Internet connection. You can connect your TV wirelessly or wired to your network router.
Page 38
> Static IP configuration and networks > Clear Internet Memory 1 - Select Static IP configuration and configure the With Clear Internet Memory you clear your Philips connection. server registration and parental rating settings, your 2 - You can set the number for IP video store app logins, all Philips App Gallery Address, Netmask, Gateway, DNS 1, or DNS 2.
App gallery does not hold what you are looking for, try the World Wide Web and surf the Internet on TV. Smart TV Search With Search, you can search the App Gallery for 13.1 relevant Apps. Setup Smart TV Enter a keyword in the text field, select and press OK to start searching.
Netflix If you have a Netflix menbership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby.
Amazon Prime Video With an Amazon prime membership, you gain access to thousands of popular movies and TV show, including exclusive Prime Originals. Press the app icon to open the Amazon Prime Video app. Your TV must be connected to the Internet to use the app.
YouTube YouTube provides a platform to connect to the world. Watch and discover popular videos that uploaded by YouTube users around the world. Use the YouTube app to explore the latest topics on music, news, and more. Press the app icon to open the YouTube app. Your TV must be connected to the Internet to use the app.
Please find out for yourself about the local rules on can also find the power consumption values for this separate collection of batteries because correct product on the Philips website for your country disposal will help to prevent negative consequences www.philips.com/TVsupport for the environment and human health.
18.3 • You can use any DLNA V1.5 certified media server software. Supported Input Resolution - • You can use the Philips TV Remote app (iOS and Video Android) on mobile devices. Performance may vary, depending on the capabilities of the mobile device and the software used.
The TV goes back to standby after showing the Philips startup screen 19.1 When the TV is in standby, a Philips startup screen is Tips displayed, then the TV returns to standby mode. This is normal behaviour. When the TV is disconnected...
Press (Home) > Settings > Help > Check the TV. TV to search for One, Two or 3/4 satellites. If the video clip stays black, call Philips. Wait until the A dual head LNB cannot find a second satellite clip ends and select Contact info in the Help menu.
press OK. • If the picture size - its aspect ratio - does not fit the (Home) > Settings > All screen, with black bars on the top and bottom or left settings > Picture > Picture style and right side of the screen, press (Home) > •...
no picture is displayed, switch the source from one 19.11 device to another and back again. Wrong Menu Language • If there are intermittent sound disruptions, make sure that output settings from the HDMI device are Change the language back to your language. correct.
TV, power cord or antenna cable. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips TV Consumer Care to have the TV Risk of Hearing Damage checked before use. • Never expose the TV, remote control or batteries to Avoid using earphones or headphones at high excessive heat.
Page 50
Clean • Never touch, push, rub or strike the screen with any object. • Unplug the TV before cleaning. • Clean the TV and frame with a soft damp cloth and wipe gently. Never use substances such as alcohol, chemicals or household cleaners on the TV. •...
TP Vision is the warrantor in relation to the apparatus, in general have the ability to emit and TV with which this booklet was packaged. Philips and receive electromagnetic signals. One of TP Vision’s the Philips Shield Emblem are registered trademarks leading business principles is to take all necessary of Koninklijke Philips N.V.
22.4 Other Trademarks Copyrights All other registered and unregistered trademarks are 22.1 the property of their respective owners. HDMI The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
Open Source 23.1 Open Source Software This television contains open source software. TP Vision Europe B.V. hereby offers to deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source software packages used in this product for which such offer is requested by the respective licences.
Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. TP Vision does not bear any responsibility in these sorts of situations.
Digital Audio Out 9 Parental Rating 35 Digital Media Renderer - DMR 37 Pause TV 26 Digital Out Delay 32 Philips TV Remote App 10 Digital Out Format 32 Photos, Videos and Music 27 Digital Out Levelling 32 Picture Clean, Noise Reduction 30...
Page 56
Remote Control 5 Remote Control - IR Sensor 6 Remote Control and Batteries 5 Remote Control Key 5 Rename or replace device icon 13 Repair 3 Reset Settings 34 Safety and Care 49 Screen Off 33 Sharpness 29 Shop Setup 34 Sleep Timer 36 Smart TV 39 Software Version 4...
Need help?
Do you have a question about the 32PHS6825 and is the answer not in the manual?
Questions and answers