Related Manuals for Philips 271S7QJMB/73
Summary of Contents for Philips 271S7QJMB/73
- Page 1 S line 271S7 www.philips.com/welcome EN User manual Customer care and warranty 16 Troubleshooting & FAQs...
-
Page 2: Table Of Contents
4. Technical Specifications ..12 4.1 Resolution & Preset Modes ..14 5. Power Management ....15 6. Customer care and warranty .. 16 6.1 Philips’ Flat Panel Monitors Pixel Defect Policy .....16 6.2 Customer Care & Warranty ..19 7. Troubleshooting & FAQs ..20 7.1 Troubleshooting ......20... -
Page 3: Important
• Please use approved power cord and production number of the product. provided by Philips all the time. If your power cord is missing, please contact with your local service 1.1 Safety precautions and center. - Page 4 1. Important be better than a 15-minute break not expose the monitor to dust, every two hours. Try to keep your rain, water, or excessive moisture eyes from eye strain while using the environment. screen for a constant period of time • If your monitor gets wet, wipe it with by : dry cloth as soon as possible.
-
Page 5: Notational Descriptions
1. Important Warning 1.2 Notational Descriptions Failure to activate a screen saver, or The following subsections describe a periodic screen refresh application notational conventions used in this may result in severe “burn-in” or “after- document. image” or “ghost image” symptoms that will not disappear and cannot be Notes, Cautions and Warnings repaired. -
Page 6: Disposal Of Product And Packing Material
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end- of-life management primarily entails This marking on the product or on participation in national take-back... -
Page 7: Setting Up The Monitor
Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. -
Page 8: Operating The Monitor
2. Setting up the monitor 2.2 Operating the monitor Connecting to your PC Description of the control buttons 271S7 Kensington anti-theft lock Audio input Earphone jack Display port input HDMI input VGA input Switch monitor’s power ON and OFF. AC power input Access the OSD menu. - Page 9 LowBlue Mode 1, 2, 3 What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature Input HDMI in all Philips LCD monitors. It allows an DisplayPort end user to adjust screen performance Picture Picture Format Wide Screen, 4:3 or select functions of the monitors...
- Page 10 2. Setting up the monitor Resolution notification Height adjustment This monitor is designed for optimal performance at its native resolution, 1920 × 1080 @ 60 Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1920 ×...
-
Page 11: Remove The Base Assembly For Vesa Mounting
2. Setting up the monitor 2.3 Remove the Base Assembly Note This monitor accepts a 100mm x for VESA Mounting 100mm Before you start disassembling the VESA-Compliant mounting interface. monitor base, please follow the VESA Mounting Screw M4. Always instructions below to avoid any possible contact manufacturer for wall-mount damage or injury. -
Page 12: Image Optimization
ff How does it work? SmartImage is an exclusive, leading • Office: Enhances text and dampens edge Philips technology that analyzes brightness to increase readability the content displayed on your screen. and reduce eye strain. This mode Based on a scenario you select,... -
Page 13: Smartcontrast
Developed for wellbeing, How does it work? Philips LowBlue Mode setting uses When you activate SmartContrast, it will a smart software technology to analyse the content you are displaying... -
Page 14: Technical Specifications
4.Technical Specifications 4. Technical Specifications Picture/Display Monitor Panel Type IPS Technology Backlight Panel Size 27" W (68.6 cm) Aspect Ratio 16:9 Pixel Pitch 0.311(H) mm x 0.311(V) mm Contrast Ratio (typ.) 1,000:1 Optimum Resolution 1920 x 1080 @ 60 Hz Viewing Angle 178°... - Page 15 4.Technical Specifications AC Input AC Input AC Input Heat Dissipation* Voltage at Voltage at Voltage at 100VAC , 60Hz 115VAC , 60Hz 230VAC , 50Hz 88.5 BTU/hr 87.8 BTU/hr 86.8 BTU/hr Normal Operation (typ.) (typ.) (typ.) Sleep (Standby) <1.02 BTU/hr <1.02 BTU/hr <1.02 BTU/hr <1.02 BTU/hr...
-
Page 16: Resolution & Preset Modes
4.1 Resolution & Preset Modes This data is subject to change without Maximum Resolution notice. Go to www.philips.com/support 1920 x 1080 @ 60 Hz (analog input) to download the latest version of 1920 x 1080 @ 60 Hz (digital input) leaflet. -
Page 17: Power Management
5.Power Management 5. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. -
Page 18: Customer Care And Warranty
Pixel Defect Policy single black pixel. Other combinations of lit and dark sub pixels appear as Philips strives to deliver the highest single pixels of other colors. quality products. We use some of the industry's most advanced... - Page 19 Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Three adjacent lit sub pixels (one white pixel).
- Page 20 In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT Monitor panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables.
-
Page 21: Customer Care & Warranty
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below. -
Page 22: Troubleshooting & Faqs
• Disconnect the monitor from mains • First, ensure that the power button power source immediately for safety on the front of the monitor is in the • Contact with Philips customer OFF position, then press it to the service representative immediately. ON position. - Page 23 Service contact information listed in may cause "burn in", also known as Important information manual and "after-imaging " or "ghost imaging", contact Philips customer service on your screen. "Burn-in", "after- representative. imaging", or "ghost imaging" is a * Functionality different according to well-known phenomenon in LCD display.
-
Page 24: General Faqs
• Shut down your computer, that the panel surface is not disconnect your old monitor and subjected to excessive shocks reconnect your Philips LCD monitor. and is protected from sharp or blunt objects. When handling the • Turn on your monitor and then turn monitor, make sure that there is on your PC. - Page 25 Can I connect my LCD monitor to image” or “ghost image” symptoms any PC, workstation or Mac? that will not disappear and cannot be Ans.: Yes. All Philips LCD monitors are repaired. The damage mentioned above fully compatible with standard is not covered under your warranty.
- Page 26 “Attention” to show the unlock/lock status as shown below illustrators. Attention Monitor control unlocked Attention Monitor control locked Q14: Where can I find Important Information manual mentioned in EDFU? Ans.: Important Information manual can be download on the Philips website support page.
- Page 27 This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are regis- tered trademarks of Koninklijke Philips N.V. and are used under license.
Need help?
Do you have a question about the 271S7QJMB/73 and is the answer not in the manual?
Questions and answers