Contents 1 Safety 9 Adjust sound 2 Your car audio system 10 Adjust system settings Introduction What's in the box 11 Others Overview of the main unit Reset Replace fuse 3 Install the car audio system Connect wires 12 Product information Mount into the dashboard Attach the front panel USB playability information...
1 Safety Read and understand all instructions before you use your apparatus. If damage is caused by failure to follow instructions, the warranty does not apply. This apparatus is designed for negative ground (earth) 12 V DC operation only. To ensure safe driving, adjust the volume to a safe and comfortable level.
Screw x 1 pc h Disassembly tools x 2 pcs Congratulations on your purchase, and i User manual support that Philips offers, register your product at www.philips.com/welcome. Introduction With the in-car audio system, you can enjoy your drive while listening to:...
Overview of the main unit Tune for radio station. Turn the unit on or off. Skip/search for track. Fast backward/forward playback. Mute or unmute sound. Rotate to adjust volume. Press to answer or redial a call. e ZONE Press and hold to transfer call. Select tuner band.
Page 7
n SOURCE/DISPLAY Eject disc. Press repeatedly to select source. Display current status. Press and hold to select the dimmer USB socket. high or low. h AUDIO IN Connect external audio device. Press repeatedly to select a preset equalizer (EQ). Press and hold to access audio setting Press to enable or disable the MAX Sound feature.
3 Install the car Check the car's wiring carefully and connect them to the the supplied male audio system connector. These instructions are for a typical installation. However, if your car has different requirements, make the adjustment accordingly. If you have any question regarding installation kits, consult your local retailer.
Mount into the dashboard illustrated, if applicable. If the car does not have an on-board drive or navigation computer, disconnect the negative terminal of the car battery. If you disconnect the car battery in a car that has an on-board drive or navigation computer, the computer may lose its memory.
Install the sleeve into the dashboard and Slide the unit into the dashboard until you hear a click sound. Note screws, skip this step. Reconnect the negative terminal of the car battery. Place the supplied rubber cushion over the end of the mounting bolt. Attach the front panel Insert the notch on the front panel to the chassis on the main unit.
4 Get started Detach the front panel Note Always follow the instructions in this chapter in Before you detach the front panel, make sure that the sequence. system is turned off. If you contact the Consumer Care, you will be asked for the model and serial number of Press to release the front panel.
Switch music listening zone Philips’ innovative Zone technology enables driver or passengers to enjoy music with the best speakers balance and experience more vivid spacial effect as the artist is intended to create.
5 Listen to radio Select tuner sensitivity To receive more radio stations or only stations with strong signal, you can adjust the tuner sensitivity. Press and hold MENU. Tune to a radio station repeatedly until [LOCAL] is Press displayed. Press SOURCE repeatedly to select radio Rotate to select a setting: mode.
CULTURE Culture, religion and Play with RDS society SCIENCE Science The RDS (Radio Data System) function VARIED Entertainment operates only in areas with FM stations programs broadcasting RDS signals. If you tune to an RDS POP M Pop music station, the station name are displayed. ROCK M Rock music EASY M...
Page 15
Set region for AF tuning Set RDS clock You can use time signal that is broadcast [REG Only stations in current region can together with the RDS signal to set the clock of be tuned to automatically. the unit automatically. [REG All stations can be tuned to Press and hold MENU.
6 Play from hard Play from USB media Note Ensure that the USB device contains playable music. You can use this system to listen to audios that are stored on a compatible disc or USB storage device. Insert the USB device Slide the USB socket cover marked Play a disc the left.
7 Use Bluetooth Button Function Press repeatedly to select a devices repeat mode: [REP TRK] (repeat one track): play current track repeatedly. [REP FLD] (repeat a folder): With this car audio system, you can listen to play all tracks in the current audio from a player or make a call through folder repeatedly.
Disconnect a device Play audio from a Bluetooth device Press and hold MENU to access the system menu. If the connected Bluetooth device supports Press repeatedly until [DISCONN] is displayed. you can listen to tracks that are stored on the Press device through the system.
8 Connect Pick up an incoming call external sound When the system receives an incoming call, the phone number or [PHONE IN] is displayed. source Press to answer the call. Reject an incoming call until [END] is displayed. Press and hold Connect the external sound source to AUDIO IN socket with a 3.5 mm cable.
9 Adjust sound 10 Adjust system settings The following operations are applicable to all supported media. Press MENU to access system settings. Button Function Press repeatedly until one of the Rotate to increase or decrease the following settings scrolls. volume level. [BEEP TONE], [DIMMER], [DEMO], Press to mute or restore sound.
11 Others [BLACK OUT] [BKO 10 S] Turn off the screen automatically 10 seconds after last operation. Reset [BKO 20 S] Turn off the screen You can reset the unit to its default setting. automatically 20 seconds Detach the front panel. after last Press the reset button by using a ball-point operation.
12 Product information Note Product information is subject to change without prior notice. Note If the new fuse gets damaged again, there may be an General internal malfunction. Consult your local retailer. Power supply 12 V DC (11 V - 16 V), negative ground Fuse 15 A...
Bluetooth Output power Class 2 .m4p, .mp4, .aac) Frequency band 2.4000 GHz - 2.4835 GHz ISM Band Range 3 meters(free space) Standard USB playability information Compatible USB devices: interface reading all speed support (1.1, 2.0) interface reading all speed support (1.1, 2.0) Supported formats: FAT32 MP3 bit rate (data rate): 32-320 Kbps and...
Preset stations lost. requesting service. If the problem remains Battery cable is not correctly connected. unsolved, go to the Philips Web page (www. Connect the battery cable to the terminal philips.com/support). When you contact the that is always live.
14 Notice The paired mobile phone connects and disconnects constantly. The Bluetooth reception is poor. Move the mobile phone closer to the system or remove any obstacle between the mobile device that are not expressly approved by phone and the system. WOOX Innovations may void the user’s Some mobile phones may connect and authority to operate the equipment.
FM stations include on a sub-carrier signal reserved. within their normal broadcast signal. Some RDS Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. alerts or emergency broadcasts, during playback and are used by WOOX Innovations Limited of other media - CD MD, or cassette.
Need help?
Do you have a question about the CEM2220BT/55 and is the answer not in the manual?
Questions and answers