Always there to help you Register your product and get support at www.philips.com/support CEM2220BT Question? Contact Philips คู ่ ม ื อ ผู ้ ใ ช้ User manual 使用手冊...
Contents 8 Connect external sound source 1 Safety 9 Adjust sound 2 Your car audio system Introduction 10 Adjust system settings What's in the box Overview of the main unit 11 Others 3 Install the car audio system Reset Connect wires Replace fuse Mount into the dashboard Attach the front panel...
1 Safety Read and understand all instructions before you use your apparatus. If damage is caused by failure to follow instructions, the warranty does not apply. • This apparatus is designed for negative ground (earth) 12 V DC operation only. •...
Check and identify the contents of your package: a Main unit (with a sleeve) Congratulations on your purchase, and welcome to Philips! To fully benefit from the b Front panel support that Philips offers, register your product c Trim plate at www.philips.com/welcome.
Overview of the main unit • Tune for radio station. • Turn the unit on or off. • Skip/search for track. • Confirm selection. • Fast backward/forward playback. • Mute or unmute sound. • Rotate to adjust volume. • Press to answer or redial a call. e ZONE •...
Page 7
n SOURCE/DISPLAY • Eject disc. • Press repeatedly to select source. • Display current status. • Press and hold to select the dimmer • USB socket. high or low. h AUDIO IN • Connect external audio device. • Press repeatedly to select a preset equalizer (EQ).
Black Ground Yellow To the +12V car battery which is Connect wires energized at all times Note Connect the antenna and amplifier as illustrated, if applicable. • Consult a professional to connect CEM2220BT as instructed below.
Ensure that car dashboard opening is within these measurements: Remove the mounting sleeve with the supplied disassembly tools. Connector Connect to ANTENNA Antenna As indicated in Socket for ISO male Step 1 above connectors REAR LINE OUT R Rear right speaker (Socket) Rear left speaker REAR LINE OUT L...
Reconnect the negative terminal of the car battery. Attach the front panel Insert the notch on the front panel to the chassis on the main unit. Place the supplied rubber cushion over the end of the mounting bolt. Press the left end of the front panel inwards until it is securely locked with a "click".
[RUSSIA] (Russia) • Switch music listening zone [MID-EAST] (Middle East) • [ASIA] (Pacific) • Philips’ innovative Zone technology enables • [JAPAN] (Japan) driver or passengers to enjoy music with the • [AUSTRLIA] (Australia) best speakers balance and experience more Press to confirm.
Mute the button beep Each time you press a button, the unit beeps. You can turn this beep sound on or off. Press and hold MENU. repeatedly until [BEEP Press TONE] is displayed. Rotate to select a setting: • [BEEP ON]: turn the beep sound on. •...
5 Listen to radio Press and hold MENU. repeatedly until [LOCAL] is Press displayed. Rotate to select a setting: [LOCAL ON] (local on): only stations • with strong signal can be broadcast. Tune to a radio station [LOCAL OFF] (local off): stations •...
LIGHT M Light classical music Turn on RDS CLASSICS Classical music OTHER M Special music programs Note WEATHER Weather • The default setting for RDS is on. FINANCE Finance CHILDREN Children’s programs Press and hold MENU. SOCIAL Social Affairs repeatedly until [RDS] is Press RELIGION Religion...
Page 15
Receive traffic announcement • If you do not want to miss traffic The accuracy of the transmitted time depends on the RDS station that transmits the time signal. announcement when enjoying music, turn on the TA (Traffic Announcement) function. Press and hold MENU. Press repeatedly until [TA] is displayed.
6 Play from hard Play from USB media Note • Ensure that the USB device contains playable music. You can use this system to listen to audios that are stored on a compatible disc or USB storage device. Insert the USB device Slide the USB socket cover marked Play a disc the left.
Button Function Press repeatedly to select a repeat mode: • [REP TRK] (repeat one track): play current track repeatedly. • [REP FLD] (repeat a folder): play all tracks in the current folder repeatedly. • [REP ALL] (repeat all tracks): play all tracks repeatedly.
On your device, follow the steps below. Press Search for Bluetooth devices. » [WAIT] is displayed with -, --, In the device list, select CEM2220BT. and --- blinking alternately until [CONNECTED] scrolls or [FAILED] Enter the default password "0000", and appears.
Pick up an incoming call Play audio from a Bluetooth device When the system receives an incoming call, the phone number or [PHONE IN] is displayed. Press to answer the call. If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can listen to tracks that are stored on the Reject an incoming call device through the system.
8 Connect external sound source Connect the external sound source to AUDIO IN socket with a 3.5 mm cable. Press SOURCE repeatedly until [AUDIO IN] is displayed. Operate the external component (refer to the instructions supplied with the external component).
9 Adjust sound The following operations are applicable to all supported media. Button Function Rotate to increase or decrease the volume level. Press to mute or restore sound. Press to enable or disable the MAX Sound feature. DBB/AS Press to enable or disable the Dynamic Bass Boost (DBB) effect.
10 Adjust system settings Press MENU to access system settings. Press repeatedly until one of the following settings scrolls. • [BEEP TONE], [DIMMER], [DEMO], [BLACK OUT], or [DANCE] Rotate to change the setting. [BEEP [BEEP Enable the beep TONE] sound of buttons. [BEEP OFF] Disable the beep sound of buttons.
11 Others Reset You can reset the unit to its default setting. Detach the front panel. Press the reset button by using a ball-point pen or a similar tool. » Preset adjustments such as preset Note channels and sound adjustments are erased.
12 Product USB playability information information Compatible USB devices: • USB flash memory: USB 1.1 host with interface reading all speed support Note (1.1, 2.0) • • USB flash players: USB 1.1 host with Product information is subject to change without prior notice.
Connect the battery cable to the terminal requesting service. If the problem remains that is always live. unsolved, go to the Philips Web page (www. Display show ERR-12 philips.com/support). When you contact the •...
Page 26
• Some mobile phones may connect and disconnect constantly when you make or end calls. This does not indicate any malfunction of the system. • For some mobile phones, the Bluetooth connection may be deactivated automatically as a power-saving feature. This does not indicate any malfunction of the system.
15 Glossary A file format with a sound data compression system. MP3 is the abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio Layer 3. With the MP3 format, one CD-R or CD-RW can contain about 10 times more data than a regular CD.
2 您的汽車音響 內容物 系統 請清點包裝內容物: a 主裝置 (含護套) 感謝您購買本產品,歡迎使用 Philips 產 b 前面板 品! 請至 www.philips.com/welcome 註冊您 c 裝飾板 的產品,以獲得 Philips 的完整支援。 d 前面板攜帶盒 e ISO 公接頭 簡介 f 橡膠墊 有了汽車音響系統,您可以在駕車的同時 g 螺絲 x 1 個 聆聽: h 拆卸工具 2 件...
6 播放硬體內的 插入 USB 裝置 媒體 的 USB 插槽外蓋向左滑 將標示 動。 將 USB 裝置插入 USB 插槽。 » 裝置將自動從 USB 裝置播放。 您可以使用此系統聆聽儲存在相容光碟或 USB 儲存裝置上的音訊。 播放光碟 備註 • 您無法播放受版權保護技術編碼的 CD。 移除 USB 裝置 您可以播放市售的音樂 CD 和下列光碟: • 可燒錄 CD (CD-R) 按 關閉裝置。 •...
Need help?
Do you have a question about the CEM2220BT and is the answer not in the manual?
Questions and answers