Page 1
Always there to help you Register your product and get support at www.philips.com/welcome AC4025 Question? Contact Philips คู ่ ม ื อ ผู ้ ใ ช ้ User Manual...
Contents Important Safety 2 Your air purifier What’s in the box Get started Install filters 4 Use the air purifier Understand the healthy air protect alert Switch on or off Change the fan speed Sleep mode Set the Timer 5 Clean your air purifier Clean the air purifier Clean the activated carbon filter 6 Replace the filters Replace the activated carbon filter and the...
If the power cord is damaged, you must • Do not insert your fingers or objects into • have it replaced by Philips, a service center the air outlet. authorized by Philips, or similarly qualified Do not use this appliance when you have •...
What’s in the box Check and identify the contents of your package: Filter 4: HEPA filter (AC4104) Filter 3: Activated carbon filter (AC4103) Filter 1 and 2 are for other Philips air purifier. User manual Warranty Quick start guide...
3 Get started Remove all the filters from the purifier. Install filters The air purifier comes with all filters fitted inside, but you have to remove the packaging of the filters before you can use the appliance. Remove all filters, unpack them, and place them back into the air purifier as described below.
Page 7
To reattach the front panel, insert the bottom hooks into the bottom of the purifier first (1). Then, push the panel against the body of the purifier(2).
4 Use the air Press the button to switch on the purifier. purifier » The power-on light [ ] on the control panel goes on. Understand the healthy air protect alert This purifier is equipped with the Healthy air protect alert to make sure that the filters are in optimal condition when the purifier is operating.
Sleep mode Change the fan speed In sleep mode, the air purifier operates very You can select the desired fan speed. quietly for your undisturbed sleep. Press the button to switch on the air Note purifier. • When you select a fan speed, you can also use the timer function (see ‘Set the timer’).
Set the Timer With the timer function, you can let the purifier operate for a set number of hours. When the set time has elapsed, the purifier automatically switches off. You can use the timer function in the following situation: Situation You will see Choose a fan...
5 Clean your air Switch off the purifier and unplug it. purifier Note • Always unplug the purifier before you clean it. • Never immerse the purifier in water or any other liquid. • Never use abrasive, aggressive, or flammable cleaning agents such as bleach or alcohol to clean any part of the purifier.
Page 12
Clean the activated carbon filter with soft brush to remove dust. Put the activated carbon filter back into the purifier. To reattach the front panel, insert the bottom hooks into the bottom of the purifier first (1). Then, push the panel against the body of the purifier(2).
6 Replace the Note filters • Insert the filters in the correct position. • Make sure you place the filters in the order of HEPA filter and activated carbon filter. • Make sure that the side with the tag is pointing towards you, and the tag is at the bottom end of The filter replacement light ( ) indicate the...
Page 14
Remove the filters using the tag on the Place the new activated carbon filter in filter. Take the filters by both sides and the purifier. gently deposit them into the household trash bin. To reattach the front panel, insert the bottom hooks into the bottom of the purifier first (1).
Press and hold the button for 2 Reset the filter lifetime seconds. counter When you replace the filters, it is important that you also reset the filter lifetime counter afterwards. This allows the purifier to be in sync with the filter lifetime. After you have replaced the filter, reset the filter time: Switch off the purifier and unplug it.
7 Troubleshooting This chapter summarizes the most common problems you could encounter with the purifier. If you are unable to solve the problem with the information below, contact the Consumer Care Center in your country. Problem Possible solution light has been flashing. The filter is full.
Philips dealer. Order parts or accessories If you have to replace a part or want to purchase an additional part, go to your Philips dealer or visit www.philips.com/support. If you have problems obtaining the parts, please contact the Philips Consumer Care Center in your country (you find its phone number in the worldwide guarantee leaflet).
One of Philips’ leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products.
Need help?
Do you have a question about the AC4025/10 and is the answer not in the manual?
Questions and answers