TECHNICAL INFORMATION HD7884/30 / HD7884/31 General coffee specifi cations: In-cup volume (mL) Regular coffee Strong coffee General WEU version France specifi c version Temperature indication (°C) Regular coffee Strong coffee General WEU version >74 >72 France specifi c version Measurement specifi cation Water spec (without pod, in mL) Regular coffee 1-cup (with 1-cup pod holder)
Page 3
HD7884/30 / HD7884/31 DISASSEMBLY- AND RE-ASSEMBLY ADVISE Make sure the appliances cordset is disconnected from the mains! To open the appliance, removal all detachable parts: Water container, driptray and cover, pod holder and collector. 1. To reach the brew chamber. 1.1.
Page 4
DISASSEMBLY- AND RE-ASSEMBLY ADVISE HD7884/30 / HD7884/31 2.2. Remove the housing. To remove the housing, start at the back side and undo the clicks on either side of the back plate, next continue on either the left of right side and undo the click on the long lower side of the housing, next undo the snap on the front round edge of the housing.
HD7884/30 / HD7884/31 REPAIR INSTRUCTION Descaling ® Scale builds up inside the machine during use. It is essential to descale the SENSEO coffee machine when the CALC Light goes on. If the descaling procedure is not performed correctly, scale residue remains behind in the machine. This causes scale to build up more quickly and may cause permanent and irreparable damage to the machine.
HD7884/30 / HD7884/31 SERVICE MODES Manual pump calibration 1. Keep the regular- and strong cup button pressed while connecting the mains voltage to the appliance. 2. The buttons can be released when the regular- and strong cup LEDs are switched on. Press and release the strong cup button to decrease the calibration value.
Need help?
Do you have a question about the Senseo Up HD7884/30 and is the answer not in the manual?
Questions and answers