Page 2
HD7880/86 / HD7880/87 TECHNICAL INFORMATION General coffee specifi cations: In-cup volume (mL) Regular coffee Strong coffee General WEU version France specifi c version Temperature indication (°C) Regular coffee Strong coffee General WEU version >74 >72 France specifi c version Measurement specifi cation Water spec (without pod, in mL) Regular coffee 1-cup (with 1-cup pod holder)
Page 3
HD7880/86 / HD7880/87 DISASSEMBLY- AND RE-ASSEMBLY ADVISE Make sure the appliances cordset is disconnected from the mains! To open the appliance, removal all detachable parts: Water container, driptray and cover, pod holder and collector. 1. To reach the brew chamber. 1.1.
Page 4
HD7880/86 / HD7880/87 DISASSEMBLY- AND RE-ASSEMBLY ADVISE 2.2. Remove the housing. To remove the housing, start at the back side and undo the clicks on either side of the back plate, next continue on either the left of right side and undo the click on the long lower side of the housing, next undo the snap on the front round edge of the housing.
HD7880/86 / HD7880/87 REPAIR INSTRUCTION Descaling ® Scale builds up inside the machine during use. It is essential to descale the SENSEO coffee machine when the CALC Light goes on. If the descaling procedure is not performed correctly, scale residue remains behind in the machine. This causes scale to build up more quickly and may cause permanent and irreparable damage to the machine.
HD7880/86 / HD7880/87 SERVICE MODES Manual pump calibration 1. Keep the regular- and strong cup button pressed while connecting the mains voltage to the appliance. 2. The buttons can be released when the regular- and strong cup LEDs are switched on. Press and release the strong cup button to decrease the calibration value.
HD7880/86 / HD7880/87 PARTS LIST Service code Description Remark 4222 259 60221 Padholder 1 Black 4222 259 60231 Padholder 2 Black 4222 259 60061 Collector assy Black 4222 247 72811 Driptray cover Deep black 4222 247 72801 Driptray Monza red 4222 247 72772 Water container lid Transparent...
Page 8
HD7880/86 / HD7880/87 PARTS LIST Service code Description Remark 4222 247 72573 Inner frame 4222 247 59473 Housing, water level sensor 4222 259 58064 PCBA HV 4222 247 08101 L-bend 4222 240 01471 Hose clamp 4222 259 61291 Tube (P - B) incl. restrictor Base plate 4222 247 69442 Suspension bracket...
Need help?
Do you have a question about the Senseo Up HD7880/86 and is the answer not in the manual?
Questions and answers