Advertisement
Quick Installation Guide
Hitachi Travelstar 7K320
Models:
HTS723232L9A360
HTE723232L9A300
HTS723225L9A360
HTE723225L9A300
HTS723216L9A360
HTE723216L9A300
HTS723212L9A360
HTE723212L9A300
HTS723280L9A360
HTE723280L9A300
HTS723232L9SA61
HTS723225L9SA61
HTS723216L9SA61
HTS723212L9SA61
HTS723280L9SA61
Handling precautions
Set the drive down gently to prevent damage from impact or vibration.
Handle the drive carefully by the edges. Do not touch the exposed printed circuit board or any electronic components.
Do not press on the top or bottom of the drive.
Before handling the drive, discharge any static electricity from yourself and your clothing. With one hand touch an
unpainted metal surface, then touch the ESD bag with the other hand. Remain in contact with the chassis and the bag
for a minimum of two seconds.
Vibration, shock and static electricity to the drive will damage the precision parts. In particular, prevent vibration or
shock generated by dropping, knocking over or hitting the drive. Also, avoid touching the electrical components
directly, which can discharge electrostatic energy and damage the drive.
Page 1
version 1.0
Advertisement
Table of Contents
Related Manuals for Hitachi Travelstar 7K320
Summary of Contents for Hitachi Travelstar 7K320
-
Page 1: Quick Installation Guide
Quick Installation Guide Hitachi Travelstar 7K320 Models: HTS723232L9A360 HTE723232L9A300 HTS723225L9A360 HTE723225L9A300 HTS723216L9A360 HTE723216L9A300 HTS723212L9A360 HTE723212L9A300 HTS723280L9A360 HTE723280L9A300 HTS723232L9SA61 HTS723225L9SA61 HTS723216L9SA61 HTS723212L9SA61 HTS723280L9SA61 Handling precautions Set the drive down gently to prevent damage from impact or vibration. Handle the drive carefully by the edges. Do not touch the exposed printed circuit board or any electronic components. - Page 2 Hitachi Global Storage Technologies Mounting Recommendations The mounting hole locations and size of the drive are shown below: Page 2 version 1.0...
- Page 3 Hitachi Global Storage Technologies The drive will operate in all axes (six directions) and will stay within the specified error rates when tilted ±5 degrees from these positions. Performance and error rate will stay within specification limits if the drive is operated in the other permissible orientations from which it was formatted.
- Page 4 Hitachi Global Storage Technologies Interface connector The figure below shows the physical pin location. This connector is identical for 2.5” and 3.5” SATA hard disk drives, therefore the host side cabling is suitable for both form factors. All pins are in a single row, with a 127 mm (0.050”) pitch.
- Page 5 Hitachi Global Storage Technologies’ trademarks are authorized for use in countries and jurisdictions in which Hitachi has the right to use, market and advertise the brands. The Travelstar trademark is authorized for use in the Americas, EMEA and the following Asia-Pacific countries and jurisdictions: Australia, Hong Kong, Japan, New Zealand, South Korea and Taiwan.
Need help?
Do you have a question about the Travelstar 7K320 and is the answer not in the manual?
Questions and answers