Philips 230B8QJEB/00 Service Manual

22.5″ lcd color monitor

Hide thumbs Also See for 230B8QJEB/00:

User manual (29 pages)

Disassembly instructions manual (10 pages)

Table Of Contents

Table of Contents

Quick Links

Download this manual

22.5" LCD Color Monitor

230B8QJEB/00

Service

Description

Table of Contents......................................................1

Revision List.............................................................2

Important Safety Notice............................................3

1. Monitor Specifications............................................5

2. LCD Monitor Description......................................8

3. Operation Instructions.........................................9

3.1 General Instructions....................................9

3.2 Control Buttons......................................9

3.3 OSD Menu......................................................10

4. Input/output Specification.....................................11

4.1 Input Signal Connector.......................................11

5. Schematic Diagram.............................................. 16

5.1 Scaler Board..............................................16

5.2 Power Board.......................................................22

ANY PERSON ATTEMPTING TO SERVICE THIS CHASSIS MUST FAMILIARIZE HIMSELF WITH THE

CHASSIS AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN

SERVICING ELECTRONIC EQUIPMENT CONTAINING HIGH VOLTAGES.

CAUTION: USE A SEPARATE ISOLATION TRANSFOMER FOR THIS UNIT WHEN SERVICING

REFER TO BACK COVER FOR IMPORTANT SAFETY GUIDELINES

R FOR TH

UNIT WHEN S

R FOR TH

UNIT WHEN S

Page

Description

6. PCB Layout................................................27

6.1 Scaler Board............................................27

6.2 Key Board..................................................27

6.3 Power Board.........................................28

7. Wiring Diagram.............................................29

8. Scaler Board Overview...................................30

9. Mechanical Instructions...............................31

10 Repair Flow Chart........................................32

11. ISP Instructions..................................................34

12. DDC Instructions................................................43

13. White Balance, Luminance Adjustment..............56

14. Monitor Exploded View.......................................57

15.Recommended&SparePartsList......................... 58

16.Different Parts List........................................59

17.General Product Specification.........................60

SAFETY NOTICE

Subject to modification ○

Jun.27, 2012

Chassis: Meridian 8

Page

Table of Contents

Need help?

Do you have a question about the 230B8QJEB/00 and is the answer not in the manual?

Questions and answers

Summary of Contents for Philips 230B8QJEB/00

Page 1 CAUTION: USE A SEPARATE ISOLATION TRANSFOMER FOR THIS UNIT WHEN SERVICING REFER TO BACK COVER FOR IMPORTANT SAFETY GUIDELINES R FOR TH Subject to modification ○ Copyright 2012 Philips Consumer Lifestyle Jun.27, 2012 R FOR TH UNIT WHEN S R FOR TH...
Page 2 Meridian 8 Revision List CC170CW Version Release Date Revision History 8 LCD Initial release, Draft Version，increase model 230B8QJEB/00 MAR-10-2020...
Page 3 Important Safety Notice CC170CW This electronic user guide is intended for anyone who uses the Philips monitor. Take time to read this user manual 8 LCD before you use your monitor. It contains important information and notes regarding operating your monitor. The...
Page 4 Meridian 8 IMPORTANT: Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content. CC170CW Uninterrupted display of still or static images over an extended period may cause “burn in”, also known as 8 LCD “after-imaging”...
Page 5 Meridian 8 1. Monitor Specifications CC170CW 8 LCD...
Page 6 Meridian 8 CC170CW 8 LCD...
Page 7 Meridian 8 CC170CW 8 LCD Note: 1. EPEAT Gold or Silver is valid only where Philips registers the product. Please visit www.epeat.net registration status in your country. 2. This data is subject to change without notice. Go to www.philips.com/support to download the latest...
Page 8 Meridian 8 2. LCD Monitor Description The LCD monitor will contain a scaler board, a key board and a power board. The scaler board houses the flat CC170CW panel control logic, brightness control logic and DDC. 8 LCD The power board will provide AC to DC inverter voltage to drive the backlight of panel and the scaler board chips each voltage.
Page 9 Meridian 8 3. Operating Instructions CC170CW 8 LCD...
Page 10 Meridian 8 CC170CW 8 LCD...
Page 11 Meridian 8 CC170CW 8 LCD...
Page 12 Meridian 8 CC170CW 4. Input/Output Specification 8 LCD 4.1 Input Signal Connector Analog Connectors Pin No. Signal Name Pin No. Signal Name DDC +3.3V or +5V Green/ SOG Logic GND Blue Sense (GND) Sense (GND) Bi-directional data Cable Detect (GND) H/H+V sync Red GND V-sync...
Page 13 Meridian 8 Pin No. Signal Name Pin No. Signal Name CC170CW TMDS Data2+ TMDS Clock Shield 8 LCD TMDS Data2 Shield TMDS Clock– TMDS Data2– Reserved (HDMI 1.0-1.3c), HEC TMDS Data1+ Data- (Optional, HDMI 1.4+ with Ethernet) TMDS Data1 Shield SCL (I²...
Page 14 Meridian 8 CC170CW 8 LCD...
Page 15 Meridian 8 4.2 Philips’ Flat Panel Monitors Pixel CC170CW 8 LCD...
Page 16 Meridian 8 CC170CW 8 LCD...
Page 17 Meridian 8 5. Schematic CC170CW 5.1 Scaler Board ( 715G9553M0AB010H4M 8 LCD VGA INPUT...
Page 18 Meridian 8 HDMI INPUT CC170CW 8 LCD...
Page 19 Meridian 8 DPI INPUT CC170CW 8 LCD...
Page 20 Meridian 8 CC170CW DVI INPUT 8 LCD...
Page 21 Meridian 8 SCALER (TSUMOP38CDT9-1) CC170CW 8 LCD...
Page 22 Meridian 8 Panel CC170CW 8 LCD...
Page 23 Meridian 8 AUDIO CC170CW 8 LCD...
Page 24 Meridian 8 POWER CC170CW 8 LCD...
Page 25 Meridian 8 5.2 Power board ( 715GA977P010000H1S CC170CW 8 LCD...
Page 26 Meridian 8 CC170CW 8 LCD...
Page 27 Meridian 8 6. PCB LAYOUT CC170CW 6.1 Scaler Board(715G9553M0AB010H4M) 8 LCD 6.2 Key board ( 715G9511K0A002004F...
Page 28 Meridian 8 6.3 Power board ( 715G7300P02001001R CC170CW 8 LCD...
Page 29 Meridian 8 7.Wiring Diagram CC170CW 8 LCD PANEL Key Board...
Page 30 Meridian 8 8. Scaler Board Overview CC170CW 8 LCD...
Page 31 Meridian 8 9. Mechanical Instructions CC170CW 8 LCD Step Figure Description Press the release Remove the hinge button to slide out hinge assy. assy. Release the screws. Remove the back Use the tool to open all cover the latches to remove back cover.
Page 32 Meridian 8 CC170CW 8 LCD Tear out all tapes. Release the screws and disconnect the Remove the main connectors to separate frame from panel the main frame from panel. Remove mylar. Separate boards Release screws from from panel boards.
Page 33 Meridian 8 CC170CW 8 LCD The panel The panel...
Page 34 Meridian 8 10. Repair Flow Chart CC170CW 1. No Power 8 LCD No power Check power cable is Re-plug the power cable tightened? Check Power “On/Off” is Turn on the Power “On/Off” switch “On”? Check the LED indicator Check the AC power is OK? Replace the power board and check connections Replace main board and check connections...
Page 35 Meridian 8 No Video (Power LED White) CC170CW 8 LCD No Video (Power LED White) Press the power button Replace the main board is OK? Replace the power The end board and connection Replace the main board The end and connection Check the FFC cable or Replace the FFC cable or panel...
Page 36 Meridian 8 3. DIM CC170CW 8 LCD DIM (image overlap, focus or flicker) Reset in factory mode The end Set to the optimal frequency, The end select the recommended frequency Readjust the phase and pixel The end clock in the user mode Pull out signal cable and Check the signal cable check “Self Test Feature...
Page 37 Meridian 8 4. Color is not optimal CC170CW Color is not optimal 8 LCD Color shift Miss color Reset the factory mode Replace the signal cable In the user mode, set the “color settings” until customer satisfy The end Pull out the signal cable and check the screen color display is normal? Replace the signal cable or PC...
Page 38 Meridian 8 11. ISP Instruction CC170CW 1.Materials list 8 LCD ISP JIG: 715GT089-B/C VGA cable TPV P/N: 089G728 GAA DB Monitor USB cable TPV P/N: 089G1758 X USB port driver Mstar tool ISP tool New F/W...
Page 39 Meridian 8 2.Connection CC170CW 8 LCD...
Page 40 Meridian 8 3.Install the MStar tool. CC170CW If you use this ISP board first time, you need to install mstar driver. 8 LCD S1. Open folder “DB07-6 driver” S2. Double-click “Setup.exe” to install the MStar tool and complete as the following steps.
Page 41 Meridian 8 CC170CW 8 LCD S3. When insert the USB cable to PC USB port, will pop up a Hardware Wizard to install the USB driver if you use this ISP board first time. It can auto install successfully by itself.
Page 42 Meridian 8 S4. After install the USB port driver, open device management menu under computer and check if ISP Driver is CC170CW installed successfully, see below picture as red marked. 8 LCD Install the ISP tool Double-click to run the ISP tool and complete as the following steps Make sure that all connect cables are OK at frist,click button “Connect”, Picture will appear as follows,then click “OK”...
Page 43 Meridian 8 Click read button and open the right software. In order to prevent HDCP key data loss, please must load the file CC170CW name contain “reduce” of the firmware. 8 LCD Click “Auto”, Select “File area” under “Erase Device ” (protect the User Data), select default for the rest. Click button “Run”.Waiting for write completed...
Page 44 Meridian 8 CC170CW 8 LCD...
Page 45 Meridian 8 12. DDC Instruction CC170CW 1. Test Environment Preparation: 8 LCD 1. Materials list HDMI cable (male to male) USB cable USB port driver TPV P/N: 089G1758 X ISP JIG: 715GT089-B Monitor ISP tool EDID...
Page 46 Meridian 8 2. Connection(DC on the monitor) CC170CW 8 LCD 3. Install USB driver. 4. Prepare the EDID: S1. Copy one folder as MMD 230B8 which must contains “config.ini” file. S2. Copy MMD 230B8 to DDC folder and put DDC and ISP tool together.
Page 47 Meridian 8 CC170CW 8 LCD S3.Double-click the icon to open the tool. S4.Select the EDID folder as the below picture.(here take 236E7 for example)
Page 48 Meridian 8 S5.Type in the 14 digit S/N,then click “Write EDID” CC170CW 8 LCD S6.When the green “PASS” appear, the process is finished.
Page 49 Meridian 8 12.6 Troubleshooting CC170CW 1. Can’t write error. 8 LCD 2. Try below few ways to cure can’t write errors! (1) AC on the monitor and turn on it.(Restart the monitor) (2) Take apart the monitor and connect the 7pin of EEPROM to GND to diable write protection then write EDID one by one.
Page 50 Meridian 8 CC170CW <-Established Timings:-> 8 LCD Established Timings 1:BF 720 x 400 @ 70Hz VGA,IBM 640 x 480 @ 60Hz VGA,IBM 640 x 480 @ 67Hz Apple,Mac II 640 x 480 @ 72Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA Established Timings 2:EF...
Page 51 Meridian 8 CC170CW 8 LCD Extension Flag : 00 Block0 Checksum : HDMI EDID： 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F --------------------Block 0-------------------- 00| 00 FF FF FF FF FF FF 00 41 0C 36 09 B5 69 0F 00 10| 0C 1D 01 03 80 31 1E 78 2A 3A 65 A7 55 52 9C 27 20| 0F 50 54 BF EF 00 D1 C0 B3 00 95 00 81 80 81 40 30| 81 C0 01 01 01 01 28 3C 80 A0 70 B0 23 40 30 20...
Page 52 Meridian 8 CC170CW 8 LCD <-Color Characteristics:-> Rx: 0.652 Gx: 0.322 Bx: 0.153 Wx: 0.312 Ry: 0.335 Gy: 0.611 By: 0.061 Wy: 0.329 <-Established Timings:-> Established Timings 1:BF 720 x 400 @ 70Hz VGA,IBM 640 x 480 @ 60Hz VGA,IBM 640 x 480 @ 67Hz Apple,Mac II 640 x 480 @ 72Hz VESA 640 x 480 @ 75Hz VESA...
Page 53 Meridian 8 Min. V. rate: 48 Hz CC170CW Max. V. rate: 76 Hz 8 LCD Min. H. rate: 30 KHz Max. H. rate: 95 KHz Max. P Clock: 210 MHz Extension Flag : 01 Block0 Checksum : ------------------------------------------------------- Block 1: Extended Block Type: CEA 861B Detailed Timing Blocks start at Byte: 29 DTV Underscan YES...
Page 54 Meridian 8 <-Speaker Allocation:-> CC170CW Speaker Allocation: FL/FR 8 LCD <-Detailed Timing Descriptions: -> Detailed Timing Descriptions: 720x480 @ 60Hz H Image Size: 488 mm V Image Size: 297 mm Pixel Clock: 27 Hz Refreshed Mode: Non-Interlaced Detailed Timing Descriptions: 1280x720 @ 60Hz H Image Size: 488 mm V Image Size: 297 mm Pixel Clock: 74 Hz...
Page 55 Install Port95NT drive program, set PC printer connector mode as ECP mode and reset PC after finish installing. c. Connect tool as follow: Note: It’s not necessary to connect Port2. To PC LPT To BSG-265A or Philips model To PC Port 2 equivalent instrument 3. Adjustment Preparation before adjustment: a.
Page 56 Meridian 8 CC170CW 8 LCD 5. Color Temp confirmation Connect the signal to the monitor, the monitor displays white-picture, use CA-210 to measure the Color Temp of the screen center and select the OSD to make sure whether the Color Temps accord with the SPEC. CIE coordinates (x,y) 11500K...
Page 57 Meridian 8 14. Monitor Exploded View CC170CW 8 LCD...
Page 58 Meridian 8 15. Recommended & Spare Parts List CC170CW Recommended Parts List 8 LCD Vendor PN part description 750SMT225U1A21N400 Panel Neo-1-M LM225WU1-S1A2-A11 EPA8.0 FQ L&T A33G1146ADT-1L0100 Relase Button MMD B2B Series ABS 94HB Injection Black A33G2292AMT-1S0100 Keypad MMD 230S8QHSB ABS 94HB Injection Black Lens MMD 230S8QHSB 3‰...
Page 59 Meridian 8 16. Different Parts List CC170CW 8 LCD Diversity of compared with Location PCM Codes Description Location PCM Codes Description Diversity of compared with Location PCM Codes Description Location PCM Codes Description...
Page 60 Meridian 8 17. General Product Specification CC170CW 230B8QJEB 8 LCD GENERAL PRODUCT SPECIFICATION Revision History Ver. Date (yy.mm.dd) Author Brief Description 2019.11.10 FRANK.QIU Initial Version (230B8QJEB) Blue: Changes than last version Red: TBD...
Page 61 . SMART CONTROL PREMIUM . SMARTContrast 1000M:1(LED) Waiting for supplier input . SMART Image . PrefectTune II (formerly FGA, FACTORY GAMMA Alignment) . PHILIPS LOGO displayed while power on . WEEE REQUIREMENT . RoHS REQUIREMENT . EPA 8.0 REQUIREMENT . CEL G2 REQUIREMENT...
Page 62: Table Of Contents
Meridian 8 CONTENTS CC170CW 8 LCD 4.1 I ....................12 NPUT IGNAL ONNECTOR FOREWORD ........................... 64 PRODUCT PROFILE ......................64 EDID ........................64 HEADER CANNING FREQUENCIES ..................... 65 : ....................... 65 MBIENT TEMPERATURE ELECTRICAL CHARACTERISTICS ..................66 NTERFACE SIGNALS ......................66 NTERFACE .........................
Page 63 .............. 85 RELIABILITY ........................... 85 IME BETWEEN AILURES ..................... 85 QUALITY ASSURANCE REQUIREMENTS ............... 85 CCEPTANCE TEST ......................85 PHILIPS’ FLAT PANEL MONITORS PIXEL DEFECT POLICY ........86 10 REGULATORY COMPLIANCE..................... 89 10.1 ORLDWIDE EGULATORY ....................89 10.2 EMC R EQUIREMENTS ......................
Page 64: Signal Connector Foreword
MSB(byte 12): 09 LSB (byte 11): 36 1920x1200 4 maximum resolution 5 Horizontal Frequency Range 30~83 KHz 6 Vertical Frequency Range 56~76Hz Monitor Name (13 characters max.) PHL 230B8 Suppliers to offer panel specifications. Panel incoming specification: Follow Philips’ specification.
Page 65: Scanning Frequencies
Meridian 7 CC170CW 8 LCD Scanning frequencies Hor. : 30 - 83 KHz Ver. : 56- 76 Hz for DisplayPort Video dot rate: < 210 MHz for VGA and < 600MHz for HDMI & DP, warning message must be displayed while over 165 MHz (supplier to provide accurate scaler bandwidth number) Power input: 90-264 V AC, 50/60 ...
Page 66: Electrical Characteristics
Scaler should be capable of below items. 1) Scaler must support color engine for Image enhancement feature (SmartImage) 8 LCD 2) Scaler must have enough memory to support PerfecTune feature and Philips OSD 3) Scaler must support SmartContras,1000M:1 DCR preferred 4) VGA signal Auto adjustment: Monitor automatically adjusts and optimizes resolution and frequency based on input signal defined by “Source”...
Page 67 Meridian 7 HDMI mode 1. RGB signal : OFF ( Be use and set ON/OFF) CC170CW 2. YUV signal : OFF (Be use and set ON/OFF) 8 LCD 3. YUV-1080p: OFF ( Be use and set ON/OFF) PS：RGB、YUV、YUV 1080P over scan flag PC timing: to follow PC timing table TMDS/+5V/DDC/HPD/CEC Signals (TMDS Signal)
Page 68: Interface
Meridian 8 Interface CC170CW 3.2.1 D-Sub Cable 8 LCD Length : 1.8 M +/- 50 mm Fix with monitor when packing, with transplant pin protective cover. Connector type : D-Sub male with DDC2B pin assignments. Blue connector thumb-operated jack screws Pin assignments: PIN No.
Page 69 Meridian 7 T.M.D.S. data0+ T.M.D.S. data0 shield CC170CW No Connect 8 LCD No Connect T.M.D.S clock shield T.M.D.S. clock+ T.M.D.S. clock- 3.2.2 HDMI (NO MHL) The input signals are applied to the display through HDMI cable. Length : Please refer to M3 cable bundle summary file Connector type : HDMI male with DDC-2B pin assignments White connector thumb-operated jackscrews With transplant pin protective cover.
Page 70: Timing Requirement
Meridian 8 CC170CW ML_Lane 1(n) 8 LCD Ground ML_Lane 1(p) ML_Lane 0(n) Ground ML_Lane 0(p) Ground Ground AUX_CH (P) Ground AUX_CH (N) Hot Plug Detect Return DP_PWR DP_PWR Timing requirement Factory Preset mode definition: Perfect FOS while presenting those timings. Will specify those timing in User's Manual Preset mode definition: Need to support those timings.
Page 71 Chinese,Portuguese… (21) Attachment files : OSD TREE Refer to OSD TREE POWER ON LOGO Power On Logo: Power On  Show up Philips logo 3 Placing_Scaling_S seconds hield_forMMD_20141016 (2).bmp  Change to input signal. This picture is reference only. The official drawing will send out by PM.
Page 72: Horizontal Scanning
Meridian 8 CC170CW Horizontal scanning 8 LCD Sync polarity : Positive or Negative Scanning frequency : 30 – 83 K Hz Vertical scanning Sync polarity : Positive or Negative Scanning frequency : 50- 76Hz for HDMI PS : Item 3.4 and 3.5 , as far as possible to be display (another Horizontal and Vertical) Power input connection Power cord length...
Page 73 Meridian 7 AC OFF ON , DISPLAY ON : 12/s (Max.) ADJ BAR DISPLAY : 5/s(Max.) AFTER OFF CC170CW 8 LCD C. HDMI mode :, Normal mode to Power saving mode: 19/s(typ.) Power Saving to Normal mode: 7/s (typ.) timming change : 5/s (typ.) change : Source...
Page 74: Vga Display Identification
3.12 DDC /CI Support and Smart Manage/Control In accordance with VESA DDC/CI and MCCS ver.2.0, the monitor should be workable with , Philips Smart Manage, Smart Control v1.4.0.5, and Portrait Display Tune at least. 3.13 Hot-key definition Refer to hot-key definition Smart contrast 3.14...
Page 75 Meridian 7 3.16.1 Smart Image OSD outlook CC170CW 8 LCD 3.15.1.1 Position The position of the button is at the bottom center of the screen. 3.15.1.2 Smart Image Logo & Banner As design to keep the Light Frame logo at header but change the name to “Smart Image” with bitmap format.
Page 76 Meridian 8 design stages) CC170CW 8 LCD Text T e x t F u n c t i o n d e f i n i t i o n . x l s x Office Purpose: Design for general office application, like word processing, Spreadsheet and email.
Page 77 Meridian 7 iii. Design: 1. Brightness level set to 20, a little higher brightness level than laptop PC, fine CC170CW tune brightness level before DVT exit. 8 LCD 2. Color temperature set to 6500K. 3. Gamma Table set to 2.2. F.
Page 78: Perfect Tune
Meridian 8 3.15 Perfect Tune CC170CW 1.PER PERFECT TUNE MUST BE DONE AFTER WARMING 30 MINUTES AT 8 LCD LEAST. 2.PERFECTTUNE MUST BE PERFORMED AFTER AUTO COLOR. 3.PERFECTTUNE MUST BE CONDUCTED THROUGH DVI OR SCALER EMBEDDED PATTERNS. 4.DELTA E < 5 3.18 Audio 3.18.1...
Page 79: Visual Characteristics
Meridian 7 3.18.8 Monitor Audio Amplifier Input Impedance CC170CW The monitor audio amplifier shall have minimum 10K Ohm AC input 8 LCD impedance P.S This charging spec for test reference. Mobile phone and pad device charging current method need in accordance with brand charge software setting. VISUAL CHARACTERISTICS Test conditions Unless otherwise specified, this specification is defined...
Page 80 Meridian 8 CC170CW The 1931 CIE Chromaticity (color triangle) diagram (x ,y) coordinate for the screen center should be: 8 LCD Product specification CIE coordinates (x,y) 11500K x = 0.270 ± 0.02 PerfecTune II y = 0.281 ± 0.02 9300K x = 0.283 ±...
Page 81 Meridian 7 CIE coordinates (x,y) CC170CW 9300K x = 0.283 ± 0.015 8 LCD y = 0.297 ± 0.015 6500K/sRGB x = 0.313 ± 0.015 y = 0.329 ± 0.015 sRGB x = 0.313 ± 0.015 y = 0.329 ± 0.015...
Page 82: Mechanical Characteristics
Base / Pedestal to be Flame Retardant UL 94-HB. All major plastic parts (bezel, back cover) need to be molded from same resin. Plastic resin type selection should be referred to “plastic-Philips Pool monitor”. 5.12 Texture/Glossing of housing The texture area and texture no should follow Philips make-up sheet.
Page 83: Tilt And Swivel Base
Regulatory label / Carton label should follow Philips requirement. China RoHS label Detail document refer to Philips Engineering Reference Book. 5.16 Product dimension / Weight ( Refer to Philips approved SHT 191/SHT560 ) Unit dimension : Packed unit dimension: Net weight Gross weight 5.17 Transportation...
Page 84: Pallet / Container Loading (Refer To Philips Approved Sht 560)
3. Cold Drop test (for design reference) Un-package test 1. Sine vibration (operating) 2. Half sine shock test (non operation) 5.18 Pallet / Container loading (Refer to Philips approved SHT 560) Transportation standards refer to TYE-M0002 ,UAN-D1534 and UAW-0309. Air shipment - Sea container 20'(pallet/slip sheet)
Page 85: Transportation Tests
Meridian 7 - Temperature : 0 to 40 degree C - Humidity : 80% max CC170CW - Altitude : 0-3658m 8 LCD - Air pressure : 600-1100 mBAR Storage - Temperature : -20 to 60 degree C - Humidity : 95% max - Altitude : 0-12192m - Air pressure...
Page 86: Philips' Flat Panel Monitors Pixel Defect Policy
Meridian 8 CC170CW PHILIPS’ FLAT PANEL MONITORS PIXEL DEFECT POLICY 8 LCD Philips’ Flat Panel Monitors Pixel Defect Policy BRIGHT DOT DEFECTS ACCEPTABLE LEVEL MODEL 271B8/S8 1 lit sub-pixel 2 adjacent lit sub-pixels 3 adjacent lit sub-pixels (one white pixel)
Page 87 Meridian 7 Fig 1: Measurement locations of Brightness Uniformity CC170CW 8 LCD...
Page 88 Meridian 8 Fig 2: Cross talk pattern CC170CW Gray level 46 (64 Gray level) 8 LCD Fig 3: Cross talk Pattern Center at Gray level 0 (Black)
Page 89: Regulatory Compliance
10.2 EMC Requirements Supplier DVT EMI test result must be submitted prior to DVT samples delivery, and PVT EMI test result must be submitted again prior to PVT samples delivery, which also has to meet Philips' immunity testing specification. 10.3 RoHS Restriction on the use of certain hazardous substances.

Philips 230B8QJEB/00 Service Manual

Quick Links

Need help?

Questions and answers

Related Manuals for Philips 230B8QJEB/00

Summary of Contents for Philips 230B8QJEB/00

Table of Contents