• Please use approved power cord and production number of the product. provided by Philips all the time. If your power cord is missing, please contact with your local service 1.1 Safety precautions and center.
Page 4
1. Important be better than a 15-minute break not expose the monitor to dust, every two hours. Try to keep your rain, water, or excessive moisture eyes from eye strain while using the environment. screen for a constant period of time • If your monitor gets wet, wipe it with by : dry cloth as soon as possible.
1. Important Warning 1.2 Notational Descriptions Failure to activate a screen saver, or The following subsections describe a periodic screen refresh application notational conventions used in this may result in severe “burn-in” or “after- document. image” or “ghost image” symptoms that will not disappear and cannot be Notes, Cautions and Warnings repaired.
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end- of-life management primarily entails This marking on the product or on participation in national take-back...
Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.
2. Setting up the monitor 2.2 Operating the monitor Connecting to your PC Description of the control buttons 6 7 8 Power Switch AC power input DisplayPort input DVI input Switch monitor’s power HDMI input ON and OFF. VGA input Access the OSD menu.
Page 9
On-Screen Display. You can use On-Screen Display (OSD) is a feature this as a reference when you want to in all Philips LCD monitors. It allows an work your way around the different end user to adjust screen performance adjustments later on.
Page 10
2. Setting up the monitor Resolution notification Height adjustment This monitor is designed for optimal performance at its native resolution, 1920 x 1200 @ 60 Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1920 x 1200 @ 60 Hz for best results.
2. Setting up the monitor Note 2.3 Remove the Base Assembly This monitor accepts a 100mm x 100mm for VESA Mounting VESA-Compliant mounting interface. Before you start disassembling the VESA Mounting Screw M4. Always monitor base, please follow the contact manufacturer for wall-mount instructions below to avoid any possible installation.
How does it work? • EasyRead: Helps improve reading SmartImage is an exclusive, leading of text based application like PDF edge Philips technology that analyzes ebooks. By using a special algorithm the content displayed on your screen. which increases the contrast and...
LED displays can cause great entertainment experience when eye damage and affect vision over viewing videos or playing games. time. Developed for wellbeing, Philips LowBlue Mode setting uses a smart software technology to reduce harmful shortwave blue light. • Off: No optimization by SmartImage.
5.Technical Specifications 5. Technical Specifications Picture/Display Monitor Panel Type IPS Technology Backlight W-LED Panel Size 22.5" W (57.2 cm) Aspect Ratio 16:10 Pixel Pitch 0.25425 (H) mm x 0.24765 (V) mm Contrast Ratio (typ.) 1,000:1 Optimum Resolution 1920 x 1200 @ 60 Hz Viewing Angle 178°...
Page 16
5.Technical Specifications Power AC Input AC Input AC Input Consumption Voltage at Voltage at Voltage at 100VAC , 60Hz 115VAC , 60Hz 230VAC, 50Hz Normal Operation 16.2 W (typ.) 16.3 W (typ.) 16.4 W (typ.) Sleep (Standby) <0.3 W <0.3 W <0.3 W <0.3 W <0.3 W...
Page 17
5.Technical Specifications Environmental and energy ROHS Packaging 100% recyclable Specific Substances 100% PVC BFR free housing Cabinet Color Black Finish Texture Note This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
6.Power Management 6. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
Pixel Defect Policy single black pixel. Other combinations of lit and dark sub pixels appear as Philips strives to deliver the highest single pixels of other colors. quality products. We use some of the industry's most advanced...
Page 21
Black Dot Defects the warranty period, a TFT Monitor Black dot defects appear as pixels or panel in a Philips flat panel monitor sub pixels that are always dark or 'off'. must have pixel or sub pixel defects That is, a dark dot is a sub-pixel that...
Page 22
7.Customer care and warranty BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* >15mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 5 or fewer...
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below.
• Contact with Philips customer • First, ensure that the power button service representative immediately. on the front of the monitor is in the...
Page 25
Service contact information listed in images over an extended period Important information manual and may cause "burn in", also known as contact Philips customer service "after-imaging " or "ghost imaging", representative. on your screen. "Burn-in", "after- * Functionality different according to imaging", or "ghost imaging"...
This may reconnect your Philips LCD monitor. affect your warranty conditions. • Turn on your monitor and then turn How should I clean the LCD on your PC.
Page 27
“burn-in” or “after- any PC, workstation or Mac? image” or “ghost image” symptoms Ans.: Yes. All Philips LCD monitors are that will not disappear and cannot be fully compatible with standard repaired. The damage mentioned above PCs, Macs and workstations.
Page 28
“Attention” to show the unlock/lock status as shown below illustrators. Q14: Where can I find Important Information manual mentioned in EDFU? Ans.: Important Information manual can be download on the Philips website support page.
Page 29
This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are regis- tered trademarks of Koninklijke Philips N.V. and are used under license.
Need help?
Do you have a question about the B line 230B8 and is the answer not in the manual?
Questions and answers