Mitsubishi Electric MSY-TP35VF Installation Manual
Hide thumbs
Also See for MSY-TP35VF:
- Operating instructions manual (10 pages) ,
- Installation manual (9 pages) ,
- Operating instructions manual (125 pages)
Table of Contents
Advertisement
Quick Links
SPLIT-TYPE AIR CONDITIONERS
INSTALLATION MANUAL
1. BEFORE INSTALLATION
MEANINGS OF SYMBOLS DISPLAYED ON INDOOR UNIT AND/OR OUTDOOR UNIT
WARNING
1-1. THE FOLLOWING SHOULD ALWAYS BE OBSERVED FOR SAFETY
■ Do not install the unit by yourself (user).
■ Perform the installation securely referring to the
installation manual.
■ When installing the unit, use appropriate protective
equipment and tools for safety.
■ Install the unit securely in a place which can bear
the weight of the unit.
■ Do not alter the unit.
■
experienced electrician, according to the installation
manual. Be sure to use an exclusive circuit. Do not
connect other electrical appliances to the circuit.
■ Earth the unit correctly.
■ Do not damage the wires by applying excessive
pressure with parts or screws.
■ Be sure to cut off the main power in case of setting
up the indoor P.C. board or wiring works.
■
the terminal block connecting sections so the stress
of the wires is not applied to the sections. Do not
extend the wires, or use intermediate connection.
■
gas may leak.
■ Do not use intermediate connection of the power
cord or the extension cord and do not connect many
devices to one AC outlet.
REFRIGERANT
Model names are indicated in 1-3.
WARNING
■
for the installation work.
-
■ When plugging the power supply plug into the
outlet, make sure that there is no dust, clogging,
or loose parts in both the outlet and the plug. Make
sure that the power supply plug is pushed com-
pletely into the outlet.
■ Attach the electrical cover to the indoor unit and the
service panel to the outdoor unit securely.
■ When installing, relocating, or servicing the unit,
make sure that no substance other than the speci-
■ Do not discharge the refrigerant into the atmos-
phere. If refrigerant leaks during installation, ven-
tilate the room. Check that the refrigerant does not
leak after installation has been completed.
■ Use appropriate tools and piping materials for instal-
lation.
■ When pumping down the refrigerant, stop the com-
pressor before disconnecting the refrigerant pipes.
Required Tools for Installation
Scale
■ When installing the unit, securely connect the re-
frigerant pipes before starting the compressor.
■
in this manual.
■ The unit shall be installed in accordance with na-
tional wiring regulations.
■
equipment, completely remove all of the refrigerant
from the air conditioner and ensure that the area is
well-ventilated.
■ Do not use means to clean, other than those recom-
mended by the manufacturer.
■ The appliance shall be stored in a room without
-
continuously operating ignition sources (for exam-
operating electric heater).
■ Do not pierce or burn.
■ Be aware that refrigerants may not contain an odour.
■ Pipe-work shall be protected from physical damage.
■ The installation of pipe-work shall be kept to a
minimum.
■ Compliance with national gas regulations shall be
observed.
■ Keep any required ventilation openings clear of
obstruction.
-
■ When opening or closing the valve below freezing
temperatures, refrigerant may spurt out from the
gap between the valve stem and the valve body,
resulting in injuries.
Advertisement
Table of Contents
Related Manuals for Mitsubishi Electric MSY-TP35VF
Summary of Contents for Mitsubishi Electric MSY-TP35VF
- Page 1 Required Tools for Installation REFRIGERANT Scale Model names are indicated in 1-3. SPLIT-TYPE AIR CONDITIONERS INSTALLATION MANUAL 1. BEFORE INSTALLATION MEANINGS OF SYMBOLS DISPLAYED ON INDOOR UNIT AND/OR OUTDOOR UNIT WARNING 1-1. THE FOLLOWING SHOULD ALWAYS BE OBSERVED FOR SAFETY WARNING ■...
-
Page 2: Selecting The Installation Location
CAUTION ■ Install an earth leakage breaker depending on the ■ Do not operate the air conditioner during interior ■ installation place. the outdoor unit. ■ Do not install the outdoor unit where small ani- ■ Perform the drainage/piping work securely ac- mals may live. -
Page 3: Installation Diagram
1-4. INSTALLATION DIAGRAM ACCESSORIES PARTS TO BE PROVIDED AT YOUR SITE Note: Putty WARNING indoors. WARNING Outdoor unit installation IMPORTANT NOTES... -
Page 4: Indoor Unit Installation
2. INDOOR UNIT INSTALLATION 2-1. FIXING OF INSTALLATION PLATE 2-3. CONNECTING WIRES FOR INDOOR UNIT 2-2. WALL HOLE DRILLING Wall side Power supply cord (K) Wall Wall Insert the Power supply cord (K) Note:... -
Page 5: Pipe Forming And Drain Piping
2-4. PIPE FORMING AND DRAIN PIPING Left or left-rear piping Pipe Forming Note: Rear, right, or downward piping Drain Piping Insert securely drain water in water Water Water Water leakage leakage leakage... -
Page 6: Outdoor Unit Installation
3. OUTDOOR UNIT INSTALLATION 3-1. CONNECTING WIRES FOR OUTDOOR UNIT Wing nut (mm) (mm) 3-3. PIPE CONNECTION Indoor unit connection 3-2. FLARING WORK Flare nut Internal thread side WARNING Burr nections, complete all brazing prior to connecting indoor unit to outdoor unit. Outdoor unit connection Inside is shin- Flare nut... -
Page 7: Purging Procedures, Leak Test, And Test Run
4. PURGING PROCEDURES, LEAK TEST, AND TEST RUN 4-1. PURGING PROCEDURES AND LEAK TEST 4-2. TEST RUN Pressure gauge •cm) 4-3. AUTO RESTART FUNCTION Caution: To the user 4-4. EXPLANATION TO THE USER WARNING risks before opening the stop valves. -
Page 8: Relocation And Maintenance
5. RELOCATION AND MAINTENANCE 5-1. REMOVING AND INSTALLING THE PANEL ASSEMBLY 5-3. PUMPING DOWN Removal procedure Installation procedure WARNING When the refrigeration circuit has a leak, do not execute pump down with the compressor. When pumping down the refrigerant, stop the compressor before discon- necting the refrigerant pipes.
Need help?
Do you have a question about the MSY-TP35VF and is the answer not in the manual?
Questions and answers