Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG FAVORIT 60760
Summary of Contents for AEG FAVORIT 60760
- Page 1 FAVORIT 60760 User manual Dishwasher...
-
Page 2: Table Of Contents
Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. -
Page 3: Operating Instructions
Safety information Operating instructions Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. -
Page 4: Installation
Safety information • Keep children well away from the dishwasher when the door is open. Installation • Check your dishwasher for any transport damage. Never connect a damaged machine. If your dishwasher is damaged contact your supplier. • All packaging must be removed before use. •... -
Page 5: Product Description
Product description Product description Upper basket Water hardness dial Salt container Detergent dispenser Rinse aid dispenser Rating plate Filters Lower spray arm Upper spray arm Worktop Internal light This appliance has an internal light that comes on when you open the door and goes off when the door is closed. -
Page 6: Control Panel
Control panel Internal light equipped with LED lamp CLASS 2 in accordance with IEC 60825-1: 1993 + A1: 1997 + A2: 2001. Emission wave length: 450 nm Maximum emitted power: 548 μW If it is necessary to replace the light, contact your local Service Force Centre. Control panel On/Off button RESET button... -
Page 7: The Digital Display
Control panel Programme lights Indicator lights MULTITAB Indicates the activation/deactivation of the MULTITAB function (see MULTITAB function) Salt Illuminates when the special salt has run out. Rinse aid Illuminates when the rinse aid has run out. 1) The salt and rinse aid indicator lights are never illuminated while a washing programme is running even if filling with salt and/or rinse aid is necessary. -
Page 8: First Use
First use To cancel a set programme or a programme in progress Press and hold the RESET button until all the programme lights illuminate. The programme has been cancelled and the machine is now in setting mode. First use Before using your dishwasher for the first time: •... -
Page 9: Setting Manually
Use of dishwasher salt The water softener must be set in both ways: manually, using the water hardness dial and electronically. Setting manually The dishwasher is factory set at position 2. 1. Open the dishwasher door. 2. Remove the lower basket from the dish- washer. -
Page 10: Use Of Rinse Aid
Use of rinse aid 2. Pour 1 litre of water inside the container (this is necessary only before filling with salt for the first time) . 3. Using the funnel provided, pour in the salt until the container is full. 4. -
Page 11: Adjusting The Dosage Of Rinse Aid
Daily use 2. Add the rinse aid in the container. The maximum level for filling is indicated by "max". The dispenser holds about 110 ml of rinse aid, which is sufficient for between 16 and 40 dishwashing cycles, depending upon the dosage setting. -
Page 12: Loading Cutlery And Dishes
Loading cutlery and dishes Loading cutlery and dishes Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher. • Before loading the dishes, you should: – Remove all left over food and debris. –... -
Page 13: The Lower Basket
Loading cutlery and dishes The lower basket Load larger and heavily soiled dishes and pans in the lower basket. To make it easier to load larger dishes, all rear plate racks in the lower basket can be folded down. The cutlery basket WARNING! Sharp knives and other items of cutlery with sharp edges must be laid in the cutlery tray or in the upper basket because of the risk of injury. - Page 14 Loading cutlery and dishes 1. Place the grid insert on the cutlery basket. 2. Place forks and spoon in the cutlery basket with their handles pointing downwards. For larger utensils, such as whisks, leave off one half of the cutlery grid. The cutlery basket can be opened out.
-
Page 15: The Upper Basket
Loading cutlery and dishes The upper basket Load smaller, fragile crockery and long, sharp cut- lery in the upper basket. • Arrange items of crockery on and under the folding cup racks so that they are offset from each other and water can reach all items. •... -
Page 16: Adjusting The Height Of The Upper Basket
Use of detergent • The row of spikes on the left of the upper basket is also in two parts and can be folded away. Spikes not folded away: place glasses, mugs etc. in the upper basket. Spikes folded away: more room for serving dishes. -
Page 17: Fill With Detergent
Use of detergent Fill with detergent 1. Open the lid. 2. Fill the detergent dispenser (1) with deter- gent. The marking indicates the dosing levels: 20 = approximately 20 g of detergent 30 = approximately 30 g of detergent. 3. All programmes with prewash need an ad- ditional detergent dose (5/10 g) that must be placed in the prewash detergent cham- ber (2). -
Page 18: Multitab Function
Multitab function Multitab function This appliance is equipped with the "Multitab function", that allows the use of the "Multitab" combi detergent tablets. These products are detergents with a combined cleaning, rinsing and salt functions. They can also contain other different agents depending on which kind of tablets you choose ("3 in 1", "4 in 1", "5 in 1"... -
Page 19: Washing Programmes
Washing programmes If you decide to turn back to the use of standard detergent system we advise that you: 1. Deactivate the "Multitab function". 2. Fill up the salt container and the rinse aid dispenser again. 3. Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes. -
Page 20: Select And Start A Washing Programme
Select and start a washing programme Programme Degree of Type of Programme description Consumption val- soil load NIGHT CYCLE Normal Crockery soil and cutlery 1) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply and the amount of dishes. -
Page 21: Unloading The Dishwasher
Unloading the dishwasher 4. The opening of the door will interrupt the countdown. Close the door; the countdown will continue from the point at which it was interrupted. 5. Once the delay start has elapsed the programme will start automatically. The selection of the washing programme and delay start can also occur with the door closed. -
Page 22: Care And Cleaning
Care and cleaning • Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. • Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes. -
Page 23: Cleaning The Spray Arms
Care and cleaning 6. Remove the flat filter from the base of the washing compartment and clean both faces thoroughly. 7. Put the flat filter back in the base of the washing compartment and ensure that it fits perfectly. 8. Place the coarse filter ( A ) in the micro- filter ( B ) and press together. -
Page 24: Moving The Machine
What to do if… Moving the machine If you have to move the machine (moving house etc..): 1. Unplug it. 2. Turn the water tap off. 3. Remove the water inlet and discharge hoses. 4. Pull the machine out together with the hoses. Avoid over tilting the machine during transportation. - Page 25 What to do if… Fault code and malfunction Possible cause and solution The programme does not start. • The dishwasher’s door has not been properly closed. Close the door. • The main plug is not plugged in. Insert the main plug. •...
-
Page 26: Technical Data
Technical data The wash results are not satisfactory Water drops have dried onto glasses and dishes • Increase rinse aid dosing. • The detergent may be the cause. Contact the detergent manufacturer’s consumer care line. If after all these checks, the problem persists, contact your local Service Force Centre. Technical data Dimension Width - height - depth (cm) -
Page 27: Levelling
Water connection By removing the machine's worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture. Proceed as follows: 1. Remove the machine's worktop by un- screwing the two rear retaining screws, pull the worktop from the back of the ma- chine and slide out the front slots, lifting... -
Page 28: Water Outlet Hose Connection
Water connection or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose. DO NOT use connection hoses which have previously been used for an old appliance. This appliance has been fitted with safety features which will prevent the water used in the appliance from returning back into the drinking water system. -
Page 29: Electrical Connection
Electrical connection Electrical connection WARNING! Safety standards require the appliance to be earthed. Prior to using the appliance for the first time, ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed. The fuse rating is also to be found on the rating plate. - Page 32 To buy accessories, consumables and spare parts at our online shop please visit: www.aeg- electrolux.co.uk...
Need help?
Do you have a question about the FAVORIT 60760 and is the answer not in the manual?
Questions and answers