Advertisement
Quick Links
Advertisement
Related Manuals for AEG F89020IM
Summary of Contents for AEG F89020IM
- Page 1 FAVORIT 89020 I User manual Dishwasher...
- Page 2 Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place.
- Page 3 Safety information Operating instructions Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features.
- Page 4 Product description • Keep children well away from the dishwasher when the door is open. Installation • Check your dishwasher for any transport damage. Never connect a damaged machine. If your dishwasher is damaged contact your supplier. • All packaging must be removed before use. •...
- Page 5 Control panel Rinse aid dispenser Rating plate Filters Lower spray arm Upper spray arm This dishwasher has an internal light that turns on and off when the opening and closing of the dishwasher's door occurs. Internal light is equipped with led lamp CLASS 1 in accordance with EN 60825-1: 1994 + A1: 2002 + A2: 2001.
- Page 6 Control panel Display This row of individual lamps is divided in two sections: Program menu and Options menu. Washing programmes: during the progress of the programme these little bars indicate the phase of the washing programme: prewash - main wash - rinses - drying. In this row several details are displayed: –...
- Page 7 Control panel Option menu Option submenu DELAY START Allows the start of the selected washing programme to be delayed for between 1 and 19 hours. The countdown will decrease with steps of 1 hour. Only in the last hour the decrease is in minutes. Once the count- down has elapsed the washing programme will start automatically.
- Page 8 First use 3. If you want to set a different language use the up and down scrolling buttons until the required language appears in the display. Press OK / START to confirm. First use Before using your dishwasher for the first time: •...
- Page 9 Use of dishwasher salt Setting manually The dishwasher is factory set at position 2. 1. Open the dishwasher door. 2. Remove the lower basket from the dish- washer. 3. Turn the water hardness dial to position 1 or 2 (see table). 4.
- Page 10 Use of rinse aid You are reminded of this by a displayed message REFILL SALT . This occurs only at the start and at the end of the washing programme; during the running of the programme the indication for salt refilling is not active. The refilling salt message can remain visible for 2-6 hours after the salt has been replenished, assuming the dishwasher remains switched on.
- Page 11 Daily use This occurs only at the start and at the end of the washing programme; during the running of the programme the indication for rinse aid refilling is not active. Adjusting the dosage of rinse aid According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1= minimum dosage, position 6= maximum dosage).
- Page 12 Loading cutlery and dishes • Plastic items and pans with non stick coatings have a tendency to retain water drops; these items will not dry as well as porcelain and steel items. • Light items (plastic bowls etc.) must be loaded in the upper basket and arranged so they do not move.
- Page 13 Loading cutlery and dishes To make it easier to load larger dishes, all rear plate racks in the lower basket can be folded down. The cutlery basket WARNING! Sharp knives and other items of cutlery with sharp edges must be laid in the cutlery tray or in the upper basket because of the risk of injury.
- Page 14 Loading cutlery and dishes 2. Place forks and spoon in the cutlery basket with their handles pointing downwards. For larger utensils, such as whisks, leave off one half of the cutlery grid. The cutlery basket can be opened out. Always make sure that you put your hand around both parts of the two-part handle when removing it from the dishwasher.
- Page 15 Loading cutlery and dishes You can replace the beer glass holders with 2 sup- plied cup racks. You can use them as: • cup shelves • champagne glass holders. Do these steps to remove beer glass holders 1. Pull upwards and push lightly on the hooks from below.
- Page 16 Loading cutlery and dishes 2. Push them forwards to fix the support again. WARNING! Do not hold the support with the hand. This can cause injury. Place the hand under the support on the lower basket. The upper basket Load smaller, fragile crockery and long, sharp cut- lery in the upper basket.
- Page 17 Loading cutlery and dishes • For glasses with long stems, fold the glass rack to the right, otherwise fold it away to the left. • The row of spikes on the left of the upper basket is also in two parts and can be folded away.
- Page 18 Use of detergent 1. Pull out the upper basket completely. 2. Holding the upper basket by the handle, raise it as far as it will go and then lower it vertically. The upper basket will latch into the lower or the upper position. WARNING! After loading your machine always close the door, as an open door can be a hazard.
- Page 19 Multitab function 2. Fill the detergent dispenser (1) with deter- gent. The marking indicates the dosing levels: 20 = approximately 20 g of detergent 30 = approximately 30 g of detergent. 3. All programmes with prewash need an ad- ditional detergent dose (5/10 g) that must be placed in the prewash detergent cham- ber (2).
- Page 20 Washing programmes Once the programme is running, the "Multitab function " can NO longer be changed. If you want to exclude the "Multitab function " you have to cancel the programme setting and then deactivate the "Multitab function ". In this case you have to set a washing programme (and desired options) again. If the drying results are not satisfactory we recommend that you: 1.
- Page 21 Washing programmes Programme Degree of Type of Programme description Consumption val- soil load Normal Crockery ENERGY soil and cutlery 55° 1 HOUR Normal Crockery soil and cutlery 45° GLASS Normal Delicate soil crockery and glass- ware PREWASH Partial load (to be com- pleted later in the day)
- Page 22 Select and start a washing programme Select and start a washing programme 1. Check that the baskets have been loaded correctly and that the spray arms are free to rotate. 2. Check that the water tap is opened. 3. Press the ON/OFF button. 4.
- Page 23 Unloading the dishwasher The dishwasher's drying system is provided with a device that allows air to circulate inside the dishwasher to prevent residual steam recondensing on the dishes as water droplets. Once the washing programme has ended this device operates intermittently for other 20 minutes, as long as the dishwasher is switched on.
- Page 24 Care and cleaning 2. The dishwasher filter system comprises a coarse filter ( A ), a microfilter ( B ) and a flat filter. Unlock the filter system using the handle on the microfilter, and remove the filter system. 3. Turn the handle about 1/4 a turn anti- clockwise and remove the filter system.
- Page 25 What to do if… If residues of soil have clogged the holes in the spray arms, remove them with a cocktail stick. External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents.
- Page 26 What to do if… Display message and malfunction Possible cause and solution • intermitted audible signal • The water tap is blocked or furred with lime- • message OPEN THE TAP in the display scale. The dishwasher does not fill with water Clean the water tap.
- Page 27 Technical data The wash results are not satisfactory The dishes are not clean • The wrong washing programme has been se- lected. • The dishes are arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded.
- Page 28 Water connection Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. This dishwasher is designed to be fitted under a kitchen counter or work surface. Attention! Carefully follow the instructions on the enclosed template for building in the dishwasher and fitting the furniture panel.
- Page 29 Water connection This appliance has been fitted with safety features which will prevent the water used in the appliance from returning back into the drinking water system. This appliance complies with the applicable plumbing regulations. Water inlet hose with safety valve After connecting the double-walled water inlet hose, the safety valve is next to the tap.
- Page 30 Electrical connection The waste connection must be at a maximum height of 60 cm from the bottom of the dish- washer. The drain hose can face either to the right or left of the dishwasher. Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water.
- Page 31 Environment concerns Environment concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
- Page 32 To buy accessories, consumables and spare parts at our online shop please visit: www.aeg- electrolux.co.uk...
Need help?
Do you have a question about the F89020IM and is the answer not in the manual?
Questions and answers