Xsmall Steam Xsmall Plus ISTRUZIONI PER L'USO OPERATING INSTRUCTIONS MODE D’EMPLOI BEDIENUNGSANLEITUNG INSTRUÇÕES PARA O USO INSTRUCCIONES PARA EL USO GEBRUIKSAANWIJZING INSTRUKCJE OBSŁUGI Type Sup 033R LEGGERE ATTENTAMENTE QUESTE ISTRUZIONI D'USO PRIMA DI UTILIZZARE LA MACCHINA. READ THESE OPERATING INSTRUCTIONS CAREFULLY BEFORE USING THE MACHINE. LIRE ATTENTIVEMENT CES INSTRUCTIONS AVANT D’UTILISER LA MACHINE.
Page 2
Please refer to an authorized dealer, or to Saeco, if you have any questions. We will be happy to provide any clarifi cations.
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electric shock and injury to persons do not immerse cord, plugs, or appliance in water or other liquid.
CAUTION This appliance is for household use only. Any servicing, other than cleaning and user maintenance, should be performed by an authorized service centre. Do not immerse machine in water. To reduce the risk of fire or electric shock, do not disassemble the machine. There are no parts inside the machine serviceable by the user.
For further information or in case of problems, please serious hazards! The appliance is not to be used by refer to an authorized service center. For Saeco persons (including children) with reduced physical, customer service, call 1-800-933-7876 in the U.S., or mental or sensory abilities or with scarce experience 1-514-385-5551 in Canada.
Page 10
SAFETY REGULATIONS person on how to properly use the machine. Hot water or overheated steam may spill out of the machine: Danger of scalding! Power Supply Do not keep the machine at a temperature below 0°C Only connect the coffee machine to a suitable power (32°F).
KEY TO MACHINE COMPONENTS - INSTALLATION Key to Machine Components INSTALLATION For your safety and the safety of others, carefully Coffee bean hopper lid follow the "Safety Regulations" in section 3. Coffee bean hopper Machine Packaging Service door The original packaging has been designed and Dregdrawer constructed to protect the machine during transport.
" " position. change according to its origin, blend and roast. The Saeco coffee machine is equipped with a self-adjusting • At this point the temperature light (19) begins to blink system that allows the use of all types of coffee beans...
ADJUSTMENTS - COFFEE BREWING Coffee Grinder Adjustment • (Fig. 12) - Release the small coffee button when the amount of coffee in the cup reaches the desired Warning! The grinder adjustment knob, inside level. the coffee bean hopper, must be turned only when the grinder is working.
Page 14
DISPENSING HOT WATER - PREPARING A CAPPUCCINO • To dispense 1 cup of coffee, press the button once. To STEAM DISPENSING / CAPPUCCINO dispense 2 cups of coffee, press the button twice. Steam may be used to froth milk for a cappuccino, as well as to reheat other beverages.
500 brewing cycles. The brew group lubricant • (Fig. 16) - Every day, after heating the milk, remove may be purchased through Saeco or authorized the external part of the Pannarello (if present) and service centers.
When descaling is complete, insert the Pannarello (for Plus version) into the hot water/steam wand as described in the "Cleaning and Maintenance" section. Saeco descaling solution should be disposed of according to the manufacturer instructions and/or the regulations in the country of use.
CONTROL PANEL LIGHTS 12 CONTROL PANEL LIGHTS Light Signals Causes Solutions The machine is warmed up and ready to use. Steady on The machine is warming up. Slowly Flashing Machine is overheating. Coffee may Prime the machine. not be brewed. Quickly Flashing Indicates that the machine is programming the amount of coffee...
Page 18
Light Signals Causes Solutions The machine needs to be primed. Fill the tank with fresh drinking water and prime the water circuit as described in section 4.4. Quickly fl ashing Brew group not inserted. Make sure that all components have Dregdrawer not inserted.
Page 19
MACHINE ACTIONS - CAUSES - SOLUTIONS Problems Causes Solutions The machine does not turn on. The machine is not connected to the Connect the machine to the power source. power source. The coffee is not hot enough. The cups are cold. Preheat the cups with hot water.
Need help?
Do you have a question about the Xsmall Steam Xsmall Plus and is the answer not in the manual?
Questions and answers