Page 2
HD9225/50 /51 /52 /53/ HD9220/50 TROUBLE SHOOTING Replace Part/ (depending of Test Possible deviation Analyses System the analyses outcome) Timer Check if the green light is lit, The green light is not lit Check the timer-switch and the Timer/Fuse and if you can hear the timer...
Page 3
HD9225/50 /51 /52 /53/ HD9220/50 REPAIR INSTRUCTIONS General remark; When you need to disconnect a wire from the crimp housing, please cut the wire half way (See in the picture below) and always connect the wires with a new 2 wire crimp housing 4222 459 51851. To crimp the housing use the Lobster AK25 No2 or Muromoto Tekko MR30A Nr 2 with Air pressure = 6 kg/cm².
Page 4
HD9225/50 /51 /52 /53/ HD9220/50 DISASSEMBLY- AND RE-ASSEMBLY ADVICE A. Top cover removal 1. Open the cover from the top cover by using a fl athead 3. Use a fl athead screw driver to open the “timer top cover” screw driver to open the 6 click connections.
Page 5
HD9225/50 /51 /52 /53/ HD9220/50 DISASSEMBLY- AND RE-ASSEMBLY ADVICE B. Cover housing removal D. Double heat shield removal 1. Follow previous step A 1. Follow previous step A, B and C 2. Open the motor fan assy from the base by unscrewing the 2.
Page 6
HD9225/50 /51 /52 /53/ HD9220/50 DISASSEMBLY- AND RE-ASSEMBLY ADVICE F. Thermostat removal G. Motor assy removal 1. Follow previous step A 1. Follow previous step A, B, C, D By step C do not cut the wires. 2. Remove the 3 screws from the thermostat assy.
Need help?
Do you have a question about the HD9225/50 and is the answer not in the manual?
Questions and answers