Related Manuals for Saeco 10002865
Summary of Contents for Saeco 10002865
- Page 1 Operation and maintenance manual Before using the machine, please read the attached operating instructions. Carefully read the safety rules. FOR HOUSEHOLD USE ONLY...
-
Page 2: Important Safeguards
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electric shock and injury to persons do not immerse cord, plugs, or appliance in water or other liquid. - Page 3 This appliance is for household use only. Any servicing, other than cleaning and user maintenance, should be performed by an authorized service center. Do not immerse machine in water. To reduce the risk of fire or electric shock, do not disassemble the machine. There are no parts inside the machine serviceable by the user.
-
Page 4: Table Of Contents
CONTENTS GENERAL INFORMATION ... 3 TECHNICAL DATA ... 3 APPLIANCE ... 4 ... 4 ACCESSORIES INSTALLATION ... 5 ... 5 STARTING THE MACHINE ... 6 SETTING THE LANGUAGE ... 6 SETTING THE WATER HARDNESS ... 7 INTENZA WATER FILTER CONTROL PANEL ... 8 ADJUSTMENTS ... -
Page 5: General Information
GENERAL INFORMATION - TECHNICAL DATA GENERAL INFORMATION This coffee machine is suitable for preparing espresso coffee using coffee beans, and it is equipped with a device to dispense steam and hot water. The machine is designed for domestic use only, and is not suitable for heavy or professional use. -
Page 6: Appliance
APPLIANCE Coffee bean hopper lid Control panel SBS dial Dispensing head Hot water / steam knob Hot water / steam wand Milk Island connection Water tank ACCESSORIES Pre-ground coffee measuring scoop and grinder adjustment key Coffee bean hopper Drip tray + grill Socket for power cord Intenza water fi... -
Page 7: Installation
STARTING THE MACHINE Make sure the power button is not pressed and the machine is turned off. Check the machine features on the label on the bottom of the appliance. Remove the coffee bean hopper lid. Fill the hopper with coffee beans. Fill the tank with fresh drinking water. -
Page 8: Setting The Language
INSTALLATION SETTING THE LANGUAGE When the machine is switched on for the fi rst time, it requires the selection of the desired language. This allows you to adjust the parameters of the beverages to the typical parameters of the country where the machine is used. -
Page 9: Intenza Water Filter
INTENZA WATER FILTER To improve the quality of the water you use, and to extend the life of your machine at the same time, it is recommended that you install the water fi lter. After installation, select the water fi lter function under the maintenance menu (see page 21). -
Page 10: Control Panel
CONTROL PANEL Access the programming menu Click wheel Selects the aroma (amount of coffee ground per cup) or selects pre-ground coffee • Press the button twice to make 2 cups. This operation can be performed up until the grinding of the fi rst cup is complete. selected espresso •... -
Page 11: Adjustments
AROMA OPTI-DOSE (ADJUSTS THE COFFEE DOSE PER CUP) It is possible to choose three aroma options (strong, medium and mild) by pressing the button. These indicate the quantity of coffee the machine grinds for each beverage. This button is also used to select the pre-ground coffee function. SELECT THE AMOUNT OF COFFEE TO BE GROUND BEFORE DISPENSING THE BEVERAGE. -
Page 12: Drip Tray Height Adjustment
ADJUSTING THE HEIGHT OF THE DRIP TRAY Adjust the drip tray to the appropriate cup size before selecting the beverage. The drip tray height is adjustable to fi t different sized cups. To adjust the drip tray, lift it or lower it manually until it reaches the desired height. -
Page 13: Coffee Grinder Adjustment
COFFEE GRINDER ADJUSTMENT The machine enables a slight adjustment of the coffee grinder. Coffee may be ground according to your own tastes. The adjustment must be performed using the small pin located inside the coffee bean hopper. This must be pressed down and turned using the supplied grinder adjustment key only. -
Page 14: Beverage Dispensing
BEVERAGE DISPENSING COFFEE BREWING CAN BE STOPPED AT ANY TIME BY PRESSING THE BUTTON AGAIN. THE STEAM WAND MAY REACH HIGH TEMPERATURES: DANGER OF SCALDING. DO NOT TOUCH IT WITH BARE HANDS. Check that all the containers are clean. To carry out this operation, follow the instructions in the “Cleaning and Maintenance”... -
Page 15: Dispensing Beverages With Ground Coffee
DISPENSING BEVERAGES WITH GROUND COFFEE The machine allows you to use pre-ground and decaffeinated coffee. Pre-ground coffee must be scooped into the bypass doser positioned next to the coffee bean hopper. Only use coffee that is ground specifi cally for espresso machines and never coffee beans or instant coffee. WARNING: ONLY PUT PRE-GROUND COFFEE INTO THE BYPASS DOSER WHEN YOU WISH TO BREW THIS TYPE OF BEVERAGE. -
Page 16: Hot Water Dispensing
BEVERAGE DISPENSING HOT WATER DISPENSING DISPENSING MAY BE PRECEDED BY SHORT SPURTS OF HOT WATER AND SCALDING IS POSSIBLE. THE HOT WATER/STEAM WAND MAY REACH HIGH TEMPERATURES: DO NOT TOUCH IT WITH BARE HANDS. USE THE APPROPRIATE HANDLE ONLY. Place a container beneath the hot water/steam wand. -
Page 17: Dispensing Steam
DISPENSING STEAM DISPENSING MAY BE PRECEDED BY SHORT SPURTS OF HOT WATER AND SCALDING IS POSSIBLE. THE HOT WATER/STEAM WAND MAY REACH HIGH TEMPERATURES: DO NOT TOUCH IT WITH BARE HANDS. USE THE APPROPRIATE HANDLE ONLY. Place a container with the beverage to be frothed beneath the hot water/steam wand. -
Page 18: Making Cappuccino
BEVERAGE DISPENSING CAPPUCCINO DISPENSING MAY BE PRECEDED BY SHORT SPURTS OF HOT WATER AND SCALDING IS POSSIBLE. THE HOT WATER/STEAM WAND MAY REACH HIGH TEMPERATURES: DO NOT TOUCH IT WITH BARE HANDS. USE THE APPROPRIATE HANDLE ONLY. Fill 1/3 of the cup with cold milk. Turn the knob to the position. -
Page 19: Milk Island Optional )
This device, which may be purchased separately, enables you to easily and comfortably prepare delicious cappuccinos. Warning: before using the Milk Island, read the manual and all precautions carefully for correct use. Important Note: the quantity of milk in the carafe must never be below the “MIN”... -
Page 20: Beverage Settings
BEVERAGE SETTINGS Every beverage can be programmed according to your individual tastes. QUICK PROGRAMMING You can program the quantity of coffee that will dispense into the cups when any beverage is selected. Select the type of beverage you want to program, then press and hold the (for example): programming espresso... - Page 21 Check that the water tank and coffee bean hopper are full; place the cup under the dispensing head. espresso Select the beverage to program. Press the button to confi rm. espresso Change the coffee quantity by navigating the click wheel with your fi...
-
Page 22: Programming The Machine
PROGRAMMING THE MACHINE Some of the machine’s functions can be programmed according to your individual preferences. bev. settings 2 mach. settings 5 special funct. 1 Press the 2 Navigate the click wheel with your fi nger to: select the functions change the function settings. -
Page 23: Machine Settings
MACHINE SETTINGS To change the machine operation settings, press the 2 mach. settings “mach. settings” and press the fi nger. language English 2.2 water hardn. 2.3 acoust.alert 2.4 filter alarm rinsing button. Navigate the click wheel with your Change the display language. Change the machine water hardness setting. -
Page 24: Maintenance
PROGRAMMING THE MACHINE MAINTENANCE To access the machine maintenance programs, press the maintenance to “maintenance” and press the your fi nger: filter 3.1.1 litres left 3.1.2 3.1.3 descaling 3.2.1 litres left 3.2.2 group wash 3.3.1 group wash Access the water fi lter menu. Display how many liters of water can still be used filter before changing the water fi... -
Page 25: Energy Saving
ENERGY SAVING To adjust the energy saving parameters of the machine, press the energy saving button, select “energy saving” (stand-by) and press the standby minutes 60 SPECIAL FUNCTIONS This menu provides access to the machine’s special functions. 5 special funct. Press the button. -
Page 26: Maintenance
MAINTENANCE Descaling cycle > maintenance > descaling > execute now This menu performs the automatic descaling cycle. Descaling is necessary every 1-2 months, when water dispenses more slowly than normal, or when the machine indicates the need to descale. The machine must be turned on and will automatically manage the dispensing of the descaling agent. - Page 27 insert descaler ok to start When the above message appears, the boiler is at the right temperature. descaling cycle please wait The machine begins to dispense the descaling solution through the hot water/steam wand. The dispensing occurs at predetermined intervals, in order to allow the solution settle.
-
Page 28: Brew Group Washing
MAINTENANCE Turn the knob until it is in the rest position ( ). Brew Group Washing > maintenance > group wash This function is used to clean the machine’s internal circuits used for brewing coffee. To rinse the brew group, simply clean with water as shown on page 28. This wash completes the maintenance process of the brew group. -
Page 29: Cleaning And Maintenance
MAINTENANCE DURING OPERATION During normal operation, the “empty grounds” message will appear. This operation must be performed when the machine is on. Remove the dregdrawer. GENERAL MACHINE CLEANING The cleaning described below must be performed once a week. Note: if water remains in the tank for several days, do not use it. WARNING! Never immerse the machine in water. -
Page 30: Cleaning The Brew Group
CLEANING AND MAINTENANCE CLEANING THE BREW GROUP The brew group must be cleaned at least once a week. Before removing the group, remove the dregdrawer as shown in on page 27. Wash the brew group with lukewarm water. Lubricate the brew group after approximately 500 brewing cycles. The brew group lubricant can be purchased through Saeco or authorized service centers. -
Page 31: Error Codes
GUIDE MESSAGE THAT APPEARS out of service (xx) restart to fix… close coffee bean lid fill container wth coffee insert the brew group insert grounds drawer empty grounds empty grounds drawer close door fill the water tank. empty drip tray change the filter carafe missing milk island missing... -
Page 32: Troubleshooting
TROUBLESHOOTING ROBLEMS The machine does not turn on. Hot water or steam is not dispensed. Coffee has little crema. The brew group does not come out. The machine grinds the coffee beans but no coffee comes out. (see note) The coffee is too weak. (see note) Coffee is brewed slowly. -
Page 33: Safety Rules
IN CASE OF EMERGENCY IMMEDIATELY UNPLUG THE CORD FROM THE OUTLET. ONLY USE THE APPLIANCE • Indoors. • For preparing coffee, hot water and for frothing milk. • For domestic use. • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. -
Page 34: Replacement Parts
SAFETY RULES concentration of dust or oily substances suspended in the air. • Do not install the machine on top of other appliances. DANGERS • The appliance must not be used by children and persons who have not been informed of its operation. •... - Page 35 SAECO INTERNATIONAL GROUP S.P.A - Via Torretta, 240 - 40041 Gaggio Montano (Bo) - Italy declare under our responsability that the product: to which this declaration relates is in conformity with the following standards or other normative documents : • Safety of household and electrical appliances - General requirements EN 60335-1(2002) + A1(2004) + A2(2006) + A11(2004) + A12(2006) •...
- Page 36 Saeco International Group S.p.A. Via Torretta, 240 I-40041 Gaggio Montano, Bologna Tel: + 39 0534 771111 Fax: + 39 0534 31025 www.saeco.com The manufacturer reserves the right to change the features of the product without prior notice. © Saeco International Group S.p.A.
Need help?
Do you have a question about the 10002865 and is the answer not in the manual?
Questions and answers