Page 22
Contents 7 Storage 1 Important Safety 8 Troubleshooting 2 Your air purifier Product Overview 9 Guarantee and service Controls overview Order parts or accessories 3 Getting started 10 Notices Installing filters Electromagnetic fields (EMF) 43 Wi-Fi connection Recycling 4 Using the appliance Understanding the air quality light Turning on and off...
Important If the power cord is • damaged, you must have it replaced by Philips, a service center authorized Safety by Philips, or similarly qualified persons in order Read this user manual carefully to avoid a hazard. before you use the appliance, and Do not use the appliance save it for future reference.
Page 24
Only use the original the plug of the appliance • Philips filters specially becomes hot. Make intended for this sure that you plug the appliance. Do not use any appliance into a properly other filters.
Page 25
Always lift or move the To prevent interference, • • appliance by the handle place the appliance at on back side of the least 2 meters away from appliance. electrical appliances that Do not insert your fingers use airborne radio waves •...
2 Your air purifier Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. This appliance works with an air filtration system. Read this user manual carefully before you use the appliance, and save it for future reference.
3 Getting started Press the two clips down and pull the pre-filter towards you. Installing filters Remove all packaging of the filters before using the appliance. Unpack them and place them into the appliance described as follows: Note Put the unpacked air •...
"Search by than one air purifier to your catogory"-"Air purifier"- smart device, you have to do "Phillips AC4550". this one by one. Complete the Put the plug of the air purifier set up of one appliance before you turn on the other appliance.
After the successful pairing and The air quality light automatically connection, the Wi-Fi indicator goes on when the air purifier is will light up white. If you want switched on, and lights up all colors to add more portable device to in sequence.
Put the plug of the air purifier in Gas level Air quality light the wall outlet. color » The air purifier beeps. Blue » All lights go on once and Blue-purple then go out again. Purple-red Touch the button to switch on the appliance.
Touch and hold the button for Auto pollution mode 3 seconds to switch off the air The specially designed auto purifier. pollution mode responds to real Note time particle level and effectively remove airborne pollutants such as • If the air purifier stays connected PM2.5.
» After 30 seconds, all the Auto allergen mode icons are off, only the sleep The extra-sensitive Auto allergen mode indicator goes on. mode is designed to react to even a small change in allergen levels in the surrounding air. Touch the Auto mode button •...
Touch the light button on/off Turbo(t) again, all lights will be on again. In Turbo mode, the air purifier operates on the highest speed. Touch the fan speed button • select the Turbo mode ( » The " " displays on the screen.
5 Cleaning Cleaning the body of the appliance Regularly clean the inside and Note outside of the appliance to prevent • Always unplug the appliance dusts from collecting. before you clean it. Wipe away dust with a soft • Never immerse the appliance in dry cloth from the body of the water or any other liquid.
Clean the inlet and outlet of Reattach the air quality sensor the air quality sensor with a soft cover. brush. Cleaning the pre-filter Remove the air quality sensor cover. Clean the pre-filter when lights up and F0 is displayed on the screen. Clean the air quality sensor, the dust inlet and the dust outlet Switch off the air purifier and...
Page 37
Press the two clips down and Note pull the pre-filter towards you. • Make sure that the pre-filters are completely dry before you put them back in the appliance. If they are still wet, bacteria may multiply in them and shorten the lifetime of the pre-filters.
• If the pre-filter is damaged, sure that the air purification filter is worn or broken, do not use. in optimal condition when the air Visit www.philips.com/support purifier is operating. When the filters or contact the Consumer Care need to be replaced, the filter code Center in your country.
Take out the pre-filter on the Put the plug of the air purifier in appliance. the power socket. Take out the expired filter. Touch the button to switch on Discard used filter. the appliance. Touch and hold the reset button for 3 seconds to reset the filter lifetime counter Note...
8 Troubleshooting This chapter summarizes the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, contact the Consumer Care Center in your country. Problem Possible solution The appliance •...
Page 41
Philips dealer or an authorized Philips service center. The filter may produce smell after being used for a while because of the absorption of indoor gases. It’s recommended that you reactivate the filter by putting it in direct sunlight for repeated use.
Page 42
Problem Possible solution • If the router your purifier is connected to is dual – band and currently it is not connecting to a 2.4GHz network, please switch to another band of the same router (2.4GHz) and try to pair your purifier again. 5GHz networks are not supported.
If applicable legal requirements there is no Consumer Care Center in and to stay well within the EMF your country, go to your local Philips standards applicable at the time of dealer. producing the products. Philips is committed to develop,...
Need help?
Do you have a question about the AC4550 and is the answer not in the manual?
Questions and answers