Related Manuals for Philips B Line 243B1/69
Summary of Contents for Philips B Line 243B1/69
- Page 1 B Line 243B1 www.philips.com/welcome EN User manual Customer care and warranty 25 Troubleshooting & FAQs...
-
Page 2: Table Of Contents
8.1 Resolution & Preset Modes ... 23 9. Power Management ....24 10. Customer care and warranty . 25 10.1 Philips’ Flat Panel Monitors Pixel Defect Policy ....25 10.2 Customer Care & Warranty ..28 11. Troubleshooting & FAQs ..29 11.1 Troubleshooting ......29... -
Page 3: Important
DC power cord for normal operation. 1.1 Safety precautions and • Please use approved power cord maintenance provided by Philips all the time. If your power cord is missing, please Warnings contact with your local service Use of controls, adjustments or center. - Page 4 1. Important degrees. If the -5 degree downward panel. When moving your monitor, tilt angle maximum is exceeded, the grasp the frame to lift; do not lift monitor damage will not be covered the monitor by placing your hand or under warranty.
-
Page 5: Notational Descriptions
1. Important activate a periodic screen refresh 1.2 Notational Descriptions application if your monitor will The following subsections describe display unchanging static content. notational conventions used in this Uninterrupted display of still or document. static images over an extended period may cause “burn-in”, also Notes, Cautions and Warnings known as “after-imaging”... -
Page 6: Disposal Of Product And Packing Material
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end- of-life management primarily entails This marking on the product or on participation in national take-back... -
Page 7: Setting Up The Monitor
This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. - Page 8 Multi-stream transport please ensure to install the USB C driver. You can find the “LAN Drivers” from CD disk if bundled or go to Philips website DP OUT support page to download the driver. Please follow the steps for the installation: 1.
- Page 9 2. Setting up the monitor 3. It will show “success” when the Some select Philips displays may not installation is finished. Power or Charge your device when it enters to “Sleep/Standby” mode 4. You must reboot your computer (White power LED blinking). In that after the installation has completed.
-
Page 10: Operating The Monitor
What is On-Screen Display (OSD)? Description of the control buttons On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window. - Page 11 2. Setting up the monitor Resolution notification Note This monitor is designed for optimal If this display has "DPS" for ECO design, performance at its native resolution, the default setting is "ON" mode: it 1920 x 1080. When the monitor is makes the screen looks slightly dim;...
- Page 12 2. Setting up the monitor Physical Function Height adjustment Tilt 35° -5° 150mm Pivot Swivel +180° 0° 0° -180° -90° 90° Warning • To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than -5 degrees.
-
Page 13: Remove The Base Assembly For Vesa Mounting
2. Setting up the monitor Note 2.3 Remove the Base Assembly This monitor accepts a 100mm x 100mm for VESA Mounting VESA-Compliant mounting interface. Before you start disassembling the VESA Mounting Screw M4. Always monitor base, please follow the contact manufacturer for wall-mount instructions below to avoid any possible installation. -
Page 14: Image Optimization
How does it work? SmartImage is an exclusive, leading edge Philips technology that analyzes the content displayed on your screen. • EasyRead: Helps improve reading Based on a scenario you select, of text based application like PDF SmartImage dynamically enhances the ebooks. -
Page 15: Smartcontrast
Developed for wellbeing, Philips LowBlue Mode setting uses a smart software technology to reduce harmful shortwave blue light. • Off: No optimization by SmartImage. -
Page 16: Power Delivery And Smart Power
What is it? brightness value of the monitor. Smart Power is an exclusive Philips You may adjust the brightness value technology that provides flexible power manually to increase power delivery delivery options for various devices. -
Page 17: Powersensor
5. PowerSensor™ detection signal for distances up to 5. PowerSensor™ 120 cm or 47 inches. (Setting 4) • Since some dark colored clothing How does it work? tends to absorb infrared signals even when the user is within 100 cm • PowerSensor works on principle or 40 inches of the display, step up of transmission and reception of... - Page 18 5. PowerSensor™ Note A manually selected PowerSensor mode will remain operational unless and until it is readjusted or the default mode is recalled. If you find that the PowerSensor is excessively sensitive to nearby motion for some reason, please adjust to a lower signal strength. Keep sensor lens clean, if the sensor lens is dirty, wipe it with alcohol to avoid reducing of distance detection.
-
Page 19: Daisy-Chain Function
6. Daisy-chain function DisplayPort multi-streaming over USB 6. Daisy-chain function Type-C DisplayPort Multi-Stream feature enables multiple monitor connections. This Philips display is equipped with USB C USB C DP OUT DisplayPort interface and DisplayPort over USB-C which enables daisy- chaining to multiple displays. - Page 20 6. Daisy-chain function Note The secondary monitor in the chain must support DisplayPort multi- streaming, and the maximum resolution support is 1920 x 1080@60Hz.
-
Page 21: Designs To Prevent Computer Vision Syndrome (Cvs)
• Reposition your screen to appropriate height and angle syndrome (CVS) according to your height. 4. Choose Philips monitor for easy-on- Philips monitor is designed to prevent eyes. eye strain caused by prolonged computer use. • Anti-glare screen: Anti-glare... -
Page 22: Technical Specifications
8.Technical Specifications 8. Technical Specifications Picture/Display Monitor Panel Type IPS Technology Backlight Panel Size 23.8" W (60.5 cm) Aspect Ratio 16:9 Pixel Pitch 0.275 (H) mm x 0.275 (V) mm Contrast Ratio(typ.) 1000:1 Optimum Resolution 1920 x 1080 @ 60 Hz Viewing Angle 178°... - Page 23 8.Technical Specifications Other Convenience VESA mount (100 x 100 mm), Kensington Lock Plug & Play Compatibility DDC/CI, sRGB, Windows 10/8.1/8/7, Mac OS X Stand Tilt -5 / +35 degree Swivel -180 / +180 degree Height adjustment 150 mm Pivot -90 / +90 degree Power AC Input AC Input...
- Page 24 100% PVC BFR free housing Cabinet Color Black Finish Texture Note 1. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet. 2. When [Smart Power] turns on, USB-C can delivery up to 90W.
-
Page 25: Resolution & Preset Modes
8.Technical Specifications 8.1 Resolution & Preset Modes Maximum Resolution 1920 x 1080 @ 75 Hz Recommended Resolution 1920 x 1080 @ 60 Hz H. freq Resolution V. freq (Hz) (kHz) 31.47 720 x 400 70.09 31.47 640 x 480 59.94 35.00 640 x 480 66.67... -
Page 26: Power Management
9.Power Management 9. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. -
Page 27: Customer Care And Warranty
Pixel Defect Policy single black pixel. Other combinations of lit and dark sub pixels appear as Philips strives to deliver the highest single pixels of other colors. quality products. We use some of the industry's most advanced... - Page 28 Black Dot Defects the warranty period, a TFT Monitor Black dot defects appear as pixels or panel in a Philips flat panel monitor sub pixels that are always dark or 'off'. must have pixel or sub pixel defects That is, a dark dot is a sub-pixel that...
- Page 29 10.Customer care and warranty BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* >15mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 5 or fewer...
-
Page 30: Customer Care & Warranty
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below. -
Page 31: Troubleshooting & Faqs
• Contact with Philips customer • First, ensure that the power button service representative immediately. on the front of the monitor is in the... -
Page 32: General Faqs
Service contact information listed in known as "after-imaging" or "ghost Regulation & Service Information Manual imaging", on your screen. "Burn-in", and contact Philips customer service "after-imaging", or "ghost imaging" representative. is a well-known phenomenon in * Functionality different according to LCD panel technology. - Page 33 Ans.: In general it is recommended disconnect your old monitor and that the panel surface is not reconnect your Philips LCD monitor. subjected to excessive shocks • Turn on your monitor and then turn and is protected from sharp or on your PC.
- Page 34 PC, workstation or Mac? a periodic screen refresh application may result in severe “burn-in” or “after- Ans.: Yes. All Philips LCD monitors are image” or “ghost image” symptoms fully compatible with standard that will not disappear and cannot be PCs, Macs and workstations.
- Page 35 Where can I find Regulation & Service Information Manual mentioned in EDFU? Ans.: Regulation & Service Information Manual can be download on the Philips website support page. Q15: Why I cannot automatically switch to the connected input source after daisy chain over USB-C? Ans.: It’s because your primary monitor...
- Page 36 This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are regis- tered trademarks of Koninklijke Philips N.V. and are used under license.
Need help?
Do you have a question about the B Line 243B1/69 and is the answer not in the manual?
Questions and answers