Advertisement
Quick Links
Colour Television
©
Copyright 2008 Koninklijke Philips Electronics N.V.
All rights reserved. No part of this publication may be reproduced, stored in a
retrieval system or transmitted, in any form or by any means, electronic,
mechanical, photocopying, or otherwise without the prior permission of Philips.
Published by MW 0867 BU TV Consumer Care
AUO (
ACER UNIP. OPT.
T370HW02V3, T370HW02V302, T370XW02V9
Contents
1. Technical Specifications, Connections, and Chassis
Overview
2. Safety Instructions, Warnings, and Notes
3. Directions for Use
4. Mechanical Instructions
5. Service Modes, Error Codes, and Fault Finding 17
6. Block Diagrams, Test Point Overviews, and
Waveforms
7. Circuit Diagrams and PWB Layouts
8. Alignments
9. Circuit Descriptions, Abbreviation List, and IC Data
Sheets
10. Spare Parts List
11. Revision List
Printed in the Netherlands
) LCD 2k8
T260XW03V3
T315HW01V0, T315XW02VF
T420HW01V4, T420XW01V9
Page
2
3
4
5
19
19
19
19
19
19
Subject to modification
Module
EN 3122 785 17793
Advertisement
Related Manuals for Philips T260XW03V3
Summary of Contents for Philips T260XW03V3
- Page 1 All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise without the prior permission of Philips. Published by MW 0867 BU TV Consumer Care...
- Page 2 TV Product Code (e) Production location: MADE IN CHINA (S1) or TAIWAN (M02/M11) I_17790_001.eps 310308 Figure 1-1 AUO board labelling (example from T260XW03V3) Specifications Below find attached the data sheets of the different LCD panels. Click on the “model number” to open.
- Page 3 Safety Instructions, Warnings, and Notes LCD AUO 2k8 EN 3 2. Safety Instructions, Warnings, and Notes Index of this chapter: • This product contains glass. If shock, vibration, heat or 2.1 General distortion is applied to the product, the glass may be 2.2 Safety Precautions broken.
- Page 4 EN 4 LCD AUO 2k8 Directions for Use • Do not touch TCP area: Do not touch TCP area at any • Never (dis)connect at power “ON”: The LCD Module case. It can cause Driver IC cracks, film cracks, etc. The consists of CMOS components, which are known as weak TCP is the weakest point of the LCD Module.
- Page 5 LCD AUO 2k8 EN 5 4. Mechanical Instructions Index of this chapter: 4.1.2 Foam Bars 4.1 General 4.2 Model T260XW03V3 4.3 Model T315HW01V0 4.4 Model T315XW02VF 4.5 Model T370HW02V3 4.6 Model T370HW02V302 4.7 Model T370XW02V9 4.8 Model T420HW01V4 4.9 Model T420XW01V9...
- Page 6 EN 6 LCD AUO 2k8 Mechanical Instructions Model T260XW03V3 4.2.1 Control Board 4. Carefully disconnect the flat cable/FPCs from their connectors. Disassembly 1. Place the panel face down on the foam bars, and locate the Control board. I_17790_005.eps I_17790_002.eps 210308...
- Page 7 Mechanical Instructions LCD AUO 2k8 EN 7 4.2.2 Inverter Board Reassembly To reassemble, perform all processes in reverse order. Disassembly 1. Place the panel face down on the foam bars, and locate the Inverter board. 2. Remove the cover screws, and remove the cover. I_17790_007.eps 210308 Figure 4-8 Remove Inverter cover...
- Page 8 EN 8 LCD AUO 2k8 Mechanical Instructions Model T315HW01V0 4.3.1 Control Board Reassembly To reassemble, perform all processes in reverse order. Disassembly Important: Be sure to insert the FPCs correctly: the black (or 1. Place the panel face down on the foam bars, and locate the sometimes white) line must follow the edge of the connector Control board.
- Page 9 Mechanical Instructions LCD AUO 2k8 EN 9 4.3.2 Inverter Board Reassembly To reassemble, perform all processes in reverse order. Disassembly 1. Place the panel face down on the foam bars, and locate the Inverter board. 2. Remove the cover screws, and remove the cover. I_17791_027.eps 240808 Figure 4-15 Remove Inverter cover...
- Page 10 EN 10 LCD AUO 2k8 Mechanical Instructions Model T315XW02VF 4.4.1 Control Board Reassembly To reassemble, perform all processes in reverse order. Disassembly Important: Be sure to insert the FPCs correctly: the black (or 1. Place the panel face down on the foam bars, and locate the sometimes white) line must follow the edge of the connector Control board.
- Page 11 Mechanical Instructions LCD AUO 2k8 EN 11 4.4.2 Inverter Board Reassembly To reassemble, perform all processes in reverse order. Disassembly 1. Place the panel face down on the foam bars, and locate the Inverter board. 2. Remove the cover screws, and remove the cover. I_17791_005.eps 020408 Figure 4-21 Remove Inverter cover...
- Page 12 EN 12 LCD AUO 2k8 Mechanical Instructions Model T370HW02V3 4.5.1 Control Board 4. You now can remove the Control Board. Disassembly Reassembly 1. Place the panel face down on the foam bars, and locate the To reassemble, perform all processes in reverse order. Control board.
- Page 13 Mechanical Instructions LCD AUO 2k8 EN 13 Model T370HW02V302 4.6.1 Control Board 4. You now can remove the Control Board. Disassembly Reassembly 1. Place the panel face down on the foam bars, and locate the To reassemble, perform all processes in reverse order. Control board.
- Page 14 EN 14 LCD AUO 2k8 Mechanical Instructions Model T370XW02V9 4.7.1 Control Board 4. Carefully disconnect the flat cable/FPCs from their connectors. Disassembly 1. Place the panel face down on the foam bars, and locate the Control board. I_17791_015.eps I_17791_012.eps 020408 020408 Figure 4-35 Unplug FPCs Figure 4-32 Control board location...
- Page 15 Mechanical Instructions LCD AUO 2k8 EN 15 Model T420HW01V4 4.8.1 Control Board Reassembly To reassemble, perform all processes in reverse order. Disassembly Important: Be sure to insert the FPCs correctly: the black (or 1. Place the panel face down on the foam bars, and locate the sometimes white) line must follow the edge of the connector Control board.
- Page 16 EN 16 LCD AUO 2k8 Mechanical Instructions Model T420XW01V9 4.9.1 Control Board Reassembly To reassemble, perform all processes in reverse order. Disassembly Important: Be sure to insert the FPCs correctly: the black (or 1. Place the panel face down on the foam bars, and locate the sometimes white) line must follow the edge of the connector Control board.
- Page 17 Service Modes, Error Codes, and Fault Finding LCD AUO 2k8 EN 17 5. Service Modes, Error Codes, and Fault Finding Index of this chapter: 5.1 Service Modes 5.2 Error Codes 5.3 Fault Finding Service Modes Not applicable. Error Codes Not applicable. Fault Finding H-LI NE V- LI NE...
- Page 18 EN 18 LCD AUO 2k8 Service Modes, Error Codes, and Fault Finding B/L shut down No Display H_16901_025.eps 261007 Figure 5-2 Symptom/Cure overview: replace the inverter/IPB in case of this symptom...
- Page 19 Red, Green, Blue colour space Tape Carrier Package IC Data Sheets Not applicable 10. Spare Parts List Please refer to the Philips Service website, for an actual overview (monthly updated). 11. Revision List Manual xxxx xxx xxxx.0 Manual xxxx xxx xxxx.2 •...
- Page 20 EN 20 LCD AUO 2k8 Revision List...
Need help?
Do you have a question about the T260XW03V3 and is the answer not in the manual?
Questions and answers