Table of Contents
Advertisement
Colour Television
©
Copyright 2008 Koninklijke Philips Electronics N.V.
All rights reserved. No part of this publication may be reproduced, stored in a
retrieval system or transmitted, in any form or by any means, electronic,
mechanical, photocopying, or otherwise without the prior permission of Philips.
Published by MW 0864 BU TV Consumer Care
AUO (
ACER UNIP. OPT.
T260XW02V4, T260XW02V401, T260XW03V1
Contents
Waveforms
Printed in the Netherlands
) LCD 2k7
T296XW01V0, T296XW01V3
T315XW01V5, T315XW02VD01
T370XW01V1, T370XW02V5
T420HW01V2, T420XW01V8
Page
2
3
4
5
28
28
28
28
28
28
Subject to modification
Module
EN 3122 785 16902
Advertisement
Table of Contents
Related Manuals for Philips T260XW02V4
Summary of Contents for Philips T260XW02V4
-
Page 1: Table Of Contents
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise without the prior permission of Philips. Published by MW 0864 BU TV Consumer Care... -
Page 2: Technical Specifications, Connections, And Chassis Overview
Board Level Repair (= board swap) scenario on LCD panels. These LCD repair manuals are created per brand, and they will contain all necessary information for the different panels used in Philips flat LCD TVs. General Manufactured 08/06 RoHS Model: T260XW03 V.3... -
Page 3: Safety Instructions, Warnings, And Notes
Safety Instructions, Warnings, and Notes LCD AUO 2k7 EN 3 2. Safety Instructions, Warnings, and Notes Index of this chapter: • This product contains glass. If shock, vibration, heat or 2.1 General distortion is applied to the product, the glass may be 2.2 Safety Precautions broken. -
Page 4: Directions For Use
EN 4 LCD AUO 2k7 Directions for Use • Do not touch TCP area: Do not touch TCP area at any • Never (dis)connect at power “ON”: The LCD Module case. It can cause Driver IC cracks, film cracks, etc. The consists of CMOS components, which are known as weak TCP is the weakest point of the LCD Module. -
Page 5: Mechanical Instructions
LCD AUO 2k7 EN 5 4. Mechanical Instructions Index of this chapter: 4.1.2 Foam Bars 4.1 General 4.2 Model T260XW02V4 4.3 Model T260XW03V1 4.4 Model T296XW01V0 and T296XW01V3 4.5 Model T315XW01V5 4.6 Model T315XW02VD01 4.7 Model T370XW01V1 4.8 Model T370XW02V5 4.9 Model T420HW01V2... - Page 6 EN 6 LCD AUO 2k7 Mechanical Instructions Model T260XW02V4 4.2.1 Control Board 4. Remove the fixation screw of the Control board. Disassembly 1. Place the panel face down on the foam bars, and locate the Control board. H_16900_026.eps 110707 Figure 4-6 Fixation screw removal H_16900_002.eps...
- Page 7 Mechanical Instructions LCD AUO 2k7 EN 7 4.2.2 Inverter Board Reassembly To reassemble, perform all processes in reverse order. Disassembly 1. Place the panel face down on the foam bars, and locate the Inverter board. 2. Remove the cover screws, and remove the cover. H_16900_029.eps 110707 Figure 4-9 Remove Inverter cover...
- Page 8 EN 8 LCD AUO 2k7 Mechanical Instructions Model T260XW03V1 4.3.1 Control Board Reassembly To reassemble, perform all processes in reverse order. Disassembly Important: Be sure to insert the FPCs correctly: the (white) line 1. Place the panel face down on the foam bars, and locate the must be invisible when inserted correctly (see figure below).
- Page 9 Mechanical Instructions LCD AUO 2k7 EN 9 4.3.2 Inverter Board Reassembly To reassemble, perform all processes in reverse order. Disassembly 1. Place the panel face down on the foam bars, and locate the Inverter board. 2. Remove the cover screws, and remove the cover. I_17791_039.eps 240808 Figure 4-15 Remove Inverter cover...
- Page 10 EN 10 LCD AUO 2k7 Mechanical Instructions Model T296XW01V0 and T296XW01V3 4.4.1 Control Board 4. Carefully disconnect the flat cable/FPCs from their connectors. Disassembly 1. Place the panel face down on the foam bars, and locate the Control board. H_16900_021.eps 110707 Figure 4-20 Unplug flat cable H_16900_002.eps...
- Page 11 Mechanical Instructions LCD AUO 2k7 EN 11 4.4.2 Inverter Board Reassembly To reassemble, perform all processes in reverse order. Disassembly 1. Place the panel face down on the foam bars, and locate the Inverter board. 2. Remove the cover screws, and remove the cover. H_16900_024.eps 110707 Figure 4-23 Inverter cover screw locations...
- Page 12 EN 12 LCD AUO 2k7 Mechanical Instructions Model T315XW01V5 4.5.1 Control Board 4. Remove the fixation screw of the Control board. Disassembly 1. Place the panel face down on the foam bars, and locate the Control board. H_16900_026.eps 110707 Figure 4-30 Fixation screw removal H_16900_002.eps 5.
- Page 13 Mechanical Instructions LCD AUO 2k7 EN 13 4.5.2 Inverter Board Reassembly To reassemble, perform all processes in reverse order. Disassembly 1. Place the panel face down on the foam bars, and locate the Inverter board. 2. Remove the cover screws, and remove the cover. H_16900_008.eps 110707 Figure 4-33 Remove Inverter cover...
- Page 14 EN 14 LCD AUO 2k7 Mechanical Instructions Model T315XW02VD01 4.6.1 Control Board Reassembly To reassemble, perform all processes in reverse order. Disassembly Important: Be sure to insert the FPCs correctly: the (white) line 1. Place the panel face down on the foam bars, and locate the must be invisible when inserted correctly (see figure below).
- Page 15 Mechanical Instructions LCD AUO 2k7 EN 15 4.6.2 Inverter Board Reassembly To reassemble, perform all processes in reverse order. Disassembly 1. Place the panel face down on the foam bars, and locate the Inverter board. 2. Remove the cover screws, and remove the cover. I_17791_045.eps 240808 Figure 4-40 Remove Inverter cover (1/2)
- Page 16 EN 16 LCD AUO 2k7 Mechanical Instructions Model T370XW01V1 4.7.1 Control Board 4. Remove the fixation screw of the Control board. Disassembly 1. Place the panel face down on the foam bars, and locate the Control board. H_16900_026.eps 110707 Figure 4-46 Fixation screw removal H_16900_002.eps 5.
- Page 17 Mechanical Instructions LCD AUO 2k7 EN 17 4.7.2 Inverter Board 4. Remove the Inverter board as shown in figure below. Disassembly 1. Place the panel face down on the foam bars, and locate the Inverter board. 2. Remove the cover screws, and remove the cover. H_16900_033.eps 250707 Figure 4-52 Remove Inverter board...
- Page 18 EN 18 LCD AUO 2k7 Mechanical Instructions Model T370XW02V5 4.8.1 Control Board Reassembly To reassemble, perform all processes in reverse order. Disassembly Important: Be sure to insert the FPCs correctly: the (white) line 1. Place the panel face down on the foam bars, and locate the must be invisible when inserted correctly (see figure below).
- Page 19 Mechanical Instructions LCD AUO 2k7 EN 19 4.8.2 Inverter Board 4. Remove the Inverter board. 5. Unplug connector CN2 on the Inverter board. Disassembly 1. Place the panel face down on the foam bars, and locate the Inverter board. 2. Remove the cover screws, and remove the cover. I_17791_054.eps 240808 Figure 4-61 Remove connector CN2...
- Page 20 EN 20 LCD AUO 2k7 Mechanical Instructions Model T420HW01V2 4.9.1 Control Board 4. Carefully disconnect the flat cable/FPCs from their connectors. Disassembly 1. Place the panel face down on the foam bars, and locate the Control board. H_16901_016.ep s 171007 H_16901_013.eps Figure 4-65 Unplug FPCs 171007...
- Page 21 Mechanical Instructions LCD AUO 2k7 EN 21 4.9.2 Inverter Board(s) Reassembly Master Inverter To reassemble, perform all processes in reverse order. Disassembly Master Inverter 1. Place the panel face down on the foam bars, and locate the Inverter board. 2. Remove the cover screws, and remove the cover. H_16901_018.eps 171007 Figure 4-67 Remove Inverter cover screws...
- Page 22 EN 22 LCD AUO 2k7 Mechanical Instructions Disassembly Slave Inverter Reassembly Slave Inverter To reassemble, perform all processes in reverse order. 1. Place the panel face down on the foam bars, and locate the Inverter board. 2. Remove the cover screws, and remove the cover. H_16901_021.eps 171007 Figure 4-70 Remove Inverter cover screws...
- Page 23 Mechanical Instructions LCD AUO 2k7 EN 23 4.10 Model T420XW01V8 4.10.1 Control Board 4. Carefully disconnect the flat cable/FPCs from their connectors. Disassembly 1. Place the panel face down on the foam bars, and locate the Control board. H_16901_004.eps 171007 Figure 4-76 Unplug FPCs H_16901_001.eps 171007...
- Page 24 EN 24 LCD AUO 2k7 Mechanical Instructions 4.10.2 Inverter Board(s) 4. Unplug connector on the Inverter board (see figure below) and remove the inverter panel. Disassembly Master Inverter 1. Place the panel face down on the foam bars, and locate the Inverter board.
- Page 25 Mechanical Instructions LCD AUO 2k7 EN 25 Disassembly Slave Inverter 1. Place the panel face down on the foam bars, and locate the Inverter board. 2. Remove the cover screws, and remove the cover. H_16901_012.eps 171007 Figure 4-85 Remove connector Reassembly Slave Inverter To reassemble, perform all processes in reverse order.
-
Page 26: Service Modes, Error Codes, And Fault Finding
EN 26 LCD AUO 2k7 Service Modes, Error Codes, and Fault Finding 5. Service Modes, Error Codes, and Fault Finding Index of this chapter: 5.1 Service Modes 5.2 Error Codes 5.3 Fault Finding Service Modes Not applicable. Error Codes Not applicable. Fault Finding H-LI NE V- LI NE... - Page 27 Service Modes, Error Codes, and Fault Finding LCD AUO 2k7 EN 27 B/L shut down No Display H_16901_025.eps 261007 Figure 5-2 Symptom/Cure overview: replace the inverter/IPB in case of this symptom H_16901_017.eps 171007 Figure 5-3 Fault Finding in the inverter parts...
-
Page 28: Block Diagrams, Test Point Overviews, And
Red, Green, Blue colour space Tape Carrier Package IC Data Sheets Not applicable 10. Spare Parts List Please refer to the Philips Service website, for an actual overview (monthly updated). 11. Revision List Manual xxxx xxx xxxx.0 Manual xxxx xxx xxxx.2 •...
Need help?
Do you have a question about the T260XW02V4 and is the answer not in the manual?
Questions and answers